Evaluation of a PET Prototype Using LYSO:Ce Monolithic Detector Block

We have analyzed the performance of a PET demonstrator formed by two sectors of four monolithic detector blocks placed face-to-face. Both front-end and read-out electronics have been evaluated by means of coincidence measurements using a rotating 22Na source placed at the center of the sectors in order to emulate the behavior of a complete full ring. A continuous training method based on neural network (NN) algorithms has been carried out to determine the entrance points over the surface of the detectors. Reconstructed images from 1 MBq 22Na point source and 22Na Derenzo phantom have been obtained using both filtered back projection (FBP) analytic methods and the OSEM 3D iterative algorithm available in the STIR software package [1]. Preliminary data on image reconstruction from a 22Na point source with Ø = 0.25 mm show spatial resolutions from 1.7 to 2.1 mm FWHM in the transverse plane. The results confirm the viability of this design for the development of a full-ring brain PET scanner compatible with magnetic resonance imaging for human studies.

Documentación de estudio para sistemas audiovisuales

Este proyecto es una documentación sintetizada, para los alumnos de Grado en Imagen y Sonido, de todos los conceptos que conciernen a la asignatura Sistemas Audiovisuales. No obstante puede servir para todo aquel al que le interese la materia, sin ser necesariamente estudiante. El material se basa en la recopilación de libros de diversos autores, páginas web y catálogos de productos de empresas del sector audiovisual. Se intenta con esto incentivar en el auto-aprendizaje, proporcionando multitud de fuentes de información. El documento se ha dividido en dos bloques temáticos correspondientes a los temas: 1- Dispositivos de captación y reproducción de sonido e imagen. 2- Señales y formatos de audio y vídeo. Aunque no es tema de este proyecto pero si de la asignatura hay que nombrar el tercer bloque temático, Introducción a los sistemas de transmisión de audio y vídeo. Dado que hay suficiente documentación de estudio sobre éste se ha optado por no incluirlo. Cada bloque temático a su vez contiene cuatro unidades didácticas. Cada unidad se ha desarrollado de manera independiente a las demás, es decir, que cada unidad puede ser estudiada sin necesidad de recurrir a otras unidades para comprender la/s que interesa/n. Por otro lado hay que remarcar que todos los capítulos tienen relación entre sí. La documentación se complementa al final de cada unidad didáctica con un test de evaluación que a su vez ha sido publicado dentro del entorno de Moodle en la página correspondiente a la asignatura. Para ello se ha accedido a esta plataforma on line con el rol de editor de contenido. Para la elaboración de los cuestionarios se han tomado los conceptos clave de cada unidad didáctica, de esta manera los alumnos pueden saber si han comprendido lo que se explica en la documentación y mejorar así sus conocimientos. Para la redacción y estructuración de cada unidad didáctica, así como el documento en general, se ha cogido como referencia la Taxonomía de objetivos de la Educación o Taxonomía de Bloom. Dado que el dominio cognitivo del lector se encuadra dentro del ‘nivel de comprensión’, el documento no resulta tedioso en su estudio. No obstante introduce al alumno en los temas más importantes de la materia, proporcionando una base sólida de conocimiento en sistemas audiovisuales. Es precisamente el interés en hacer lo más accesible posible este documento lo que ha dificultado su elaboración, ya que el área de estudio es muy extensa y es difícil sintetizar sin eliminar contenido importante. No obstante para hacer más fiable el documento se ha seguido las pautas temáticas y argumentales marcadas por el Departamento Ingeniería Audiovisual y Comunicaciones de la Escuela Universitaria de Ingeniería Técnica de Telecomunicaciones de la Universidad Politécnica de Madrid verificando cada uno de los capítulos con los profesores de este departamento. Al tratarse de un proyecto con fines académicos, el texto se ha apoyado por figuras, esquemas, tablas, anexos y desarrollo de ecuaciones para hacer más comprensible lo que se expone. Algunos de estas informaciones se incluyen en inglés y no se ha creído conveniente su traducción dado que gran parte de la información que encontrará el alumno a lo largo de la carrera vendrá escrita en este idioma. Por último hay que decir al lector que es conveniente, pero no necesario, tener ciertas nociones de cálculo, álgebra, ondas y circuitos para seguir con fluidez lo que a continuación se expone. ABSTRACT. This project concerns all the concepts and topics of the subject Audiovisual Systems. It has been created for students of Sound and Image Degree, however everyone who's interested in this subject could use it even if isn’t a student. The document is divided into two main thematic sections corresponding to the topics: 1- Catchment and reproduction devices of sound and image. 2- Audio and video signals and formats. Even if this subject it isn’t mention in this project, it’s very important to quote a third important thematic of this block , such as Introduction about Transmission of Audio and Video System. Since there is enough study-documentation about this topic, it has been taken the choice to don’t integrate this chapter in this project. Every thematic block in this project is divided in chapters that have been developed in an independent way: that’s means that for each unit it is not necessary to look forward to other chapters in this project On the other hand it is necessary to emphasize that all the chapters are related one to each other. Every didactic unit and chapter ends with an evaluation test , that has been published with Moodle System using a content editor account. Those exercises will help in a easy way the student to improve his skills and his own ability. Collection of books of various authors, websites and product catalogs of audiovisual companies are used in this document and are included for stimulate the curiosity of the student. The key concepts of each unit have been used for making tests, so in this way students could be able to know if they have understood what the documentation explains and improve his skills. For writing and building each didactic unit, such as in the general document, it has been taken reference from Bloom’s Taxonomy. Since the skills and competence of the student are concentrated in the ‘comprehension level’, it will not be very complicated or hard to study. In spite of everything, all of thematic treated and discussed in documentation gives a solid knowledge of topic about audiovisual systems. The most difficult thing of realizing this document it was to take very complex topic and try to explain them as simply as possible In spite of everything for making this document as much accurated as possible it has been taken as point of reference rules established by the Department of Audiovisual Engineering & Communications of University School of Telecommunications Engineering (EUITT-UPM). This Project reach academic goal, for this reason in this document images, tables, annexes and outlines are enclosed in this document for an easier compression. At last, it’s necessary to say that each lector must have necessary a basic knowledge about arithmetic, calculus, waves and electronic circuits in the order that he could follow in a fluently way what the documentation set out.

Explointing FPGA block memories for protected cryptographic implementations

Modern Field Programmable Gate Arrays (FPGAs) are power packed with features to facilitate designers. Availability of features like huge block memory (BRAM), Digital Signal Processing (DSP) cores, embedded CPU makes the design strategy of FPGAs quite different from ASICs. FPGA are also widely used in security-critical application where protection against known attacks is of prime importance. We focus ourselves on physical attacks which target physical implementations. To design countermeasures against such attacks, the strategy for FPGA designers should also be different from that in ASIC. The available features should be exploited to design compact and strong countermeasures. In this paper, we propose methods to exploit the BRAMs in FPGAs for designing compact countermeasures. BRAM can be used to optimize intrinsic countermeasures like masking and dual-rail logic, which otherwise have significant overhead (at least 2X). The optimizations are applied on a real AES-128 co-processor and tested for area overhead and resistance on Xilinx Virtex-5 chips. The presented masking countermeasure has an overhead of only 16% when applied on AES. Moreover Dual-rail Precharge Logic (DPL) countermeasure has been optimized to pack the whole sequential part in the BRAM, hence enhancing the security. Proper robustness evaluations are conducted to analyze the optimization for area and security.

Design and construction of the Barriga Dam spillway through an improved wedge-shaped block technology

The Barriga Dam (Burgos, Spain) is a unique case study because its trapezoid spillway is located on the dam body and is composed of wedge-shaped concrete blocks (WSB) that include certain relevant improvements. This note summarizes the main features of the studies, the key aspects of the final design of the WSB and their placement on the dam, and important details of the spillway design. The design team concluded the study by showing the suitability of this enhanced technology for application to small dams and ponds in the short term, even with unit flows above 5 m2/s.

Validation Study of the Use of Matlab/Simulink Synchronous-Machine Block for Accurate Power-Plant Stability Studies

This paper presents results of the validity study of the use of MATLAB/Simulink synchronous-machine block for power-system stability studies. Firstly, the waveforms of the theoretical synchronous-generator short-circuit currents are described. Thereafter, the comparison between the currents obtained through the simulation model in the sudden short-circuit test, are compared to the theoretical ones. Finally, the factory tests of two commercial generating units are compared to the response of the synchronous generator simulation block during sudden short-circuit, set with the same real data, with satisfactory results. This results show the validity of the use of this generator block for power plant simulation.

Mathematical development of stress-strain law for rock block contacts

The fracture behavior of rock block contacts has been studied for many years. Unfortunately, up to now, there is not a rigorous formulation or a solid theoretical foundation to support it. A mathematical development to represent the failure mechanism which occurs in the contacts between rock blocks is presented to evaluate the performance of breaking mechanism of such blocks relating it to the morphology of the contact and mechanical parameters of the material. The examined framework includes the evaluation of the surface roughness of first order in the failure mechanism of the granular particles of large size and the development of a theoretical model describing the morphology of the contact between rock blocks.

Identification of the block in targeted retroviral-mediated gene transfer

A chimeric retroviral vector (33E67) containing a CD33-specific single-chain antibody was generated in an attempt to target cells displaying the CD33 surface antigen. The chimeric envelope protein was translated, processed, and incorporated into viral particles as efficiently as wild-type envelope protein. The viral particles carrying the 33E67 envelope protein could bind efficiently to the CD33 receptor on target cells and were internalized, but no gene transfer occurred. A unique experimental approach was used to examine the basis for this postbinding block. Our data indicate that the chimeric envelope protein itself cannot participate in the fusion process, the most reasonable explanation being that this chimeric protein cannot undergo the appropriate conformational change that is thought to be triggered by receptor binding, a suggested prerequisite to subsequent fusion and core entry. These results indicate that the block to gene transfer in this system, and probably in most of the current chimeric retroviral vectors to date, is the inability of the chimeric envelope protein to undergo this obligatory conformational change.

Calcium block of Na+ channels and its effect on closing rate

Calcium ion transiently blocks Na+ channels, and it shortens the time course for closing of their activation gates. We examined the relation between block and closing kinetics by using the Na+ channels natively expressed in GH3 cells, a clonal line of rat pituitary cells. To simplify analysis, inactivation of the Na+ channels was destroyed by including papain in the internal medium. All divalent cations tested, and trivalent La3+, blocked a progressively larger fraction of the channels as their concentration increased, and they accelerated the closing of the Na+ channel activation gate. For calcium, the most extensively studied cation, there is an approximately linear relation between the fraction of the channels that are calcium-blocked and the closing rate. Extrapolation of the data to very low calcium suggests that closing rate is near zero when there is no block. Analysis shows that, almost with certainty, the channels can close when occupied by calcium. The analysis further suggests that the channels close preferentially or exclusively from the calcium-blocked state.

Sequence motifs in adenoviral DNA block immune activation by stimulatory CpG motifs

Unmethylated CpG dinucleotides in particular base contexts (CpG-S motifs) are relatively common in bacterial DNA but are rare in vertebrate DNA. B cells and monocytes have the ability to detect such CpG-S motifs that trigger innate immune defenses with production of Th1-like cytokines. Despite comparable levels of unmethylated CpG dinucleotides, DNA from serotype 12 adenovirus is immune-stimulatory, but serotype 2 is nonstimulatory and can even inhibit activation by bacterial DNA. In type 12 genomes, the distribution of CpG-flanking bases is similar to that predicted by chance. However, in type 2 adenoviral DNA the immune stimulatory CpG-S motifs are outnumbered by a 15- to 30-fold excess of CpG dinucleotides in clusters of direct repeats or with a C on the 5′ side or a G on the 3′ side. Synthetic oligodeoxynucleotides containing these putative neutralizing (CpG-N) motifs block immune activation by CpG-S motifs in vitro and in vivo. Eliminating 52 of the 134 CpG-N motifs present in a DNA vaccine markedly enhanced its Th1-like function in vivo, which was increased further by the addition of CpG-S motifs. Thus, depending on the CpG motif, prokaryotic DNA can be either immune-stimulatory or neutralizing. These results have important implications for understanding microbial pathogenesis and molecular evolution and for the clinical development of DNA vaccines and gene therapy vectors.

Paracrine stimulation of interstitial collagenase (MMP-1) in the human endometrium by interleukin 1α and its dual block by ovarian steroids

In the cycling human endometrium, the expression of interstitial collagenase (MMP-1) and of several related matrix metalloproteinases (MMPs) follows the late-secretory fall in sex steroid plasma concentrations and is thought to be a critical step leading to menstruation. The rapid and extensive lysis of interstitial matrix that precedes menstrual shedding requires a strict control of these proteinases. However, the mechanism by which ovarian steroids regulate endometrial MMPs remains unclear. We report here that, in the absence of ovarian steroids, MMP-1 expression in endometrial fibroblasts is markedly stimulated by medium conditioned by endometrial epithelial cells. This stimulation can be prevented by antibodies directed against interleukin 1α (IL-1α) but not against several other cytokines. Ovarian steroids inhibit the release of IL-1α and repress MMP-1 production by IL-1α-stimulated fibroblasts. In short-term cultures of endometrial explants obtained throughout the menstrual cycle, the release of both IL-1α and MMP-1 is essentially limited to the perimenstrual phase. We conclude that epithelium-derived IL-1α is the key paracrine inducer of MMP-1 in endometrial fibroblasts. However, MMP-1 production in the human endometrium is ultimately blocked by ovarian steroids, which act both upstream and downstream of IL-1α, thereby exerting an effective control via a “double-block” mechanism.

Phentolamine block of KATP channels is mediated by Kir6.2

The ATP-sensitive K+-channel (KATP channel) plays a key role in insulin secretion from pancreatic β cells. It is closed both by glucose metabolism and the sulfonylurea drugs that are used in the treatment of noninsulin-dependent diabetes mellitus, thereby initiating a membrane depolarization that activates voltage-dependent Ca2+ entry and insulin release. The β cell KATP channel is a complex of two proteins: Kir6.2 and SUR1. The former is an ATP-sensitive K+-selective pore, whereas SUR1 is a channel regulator that endows Kir6.2 with sensitivity to sulfonylureas. A number of drugs containing an imidazoline moiety, such as phentolamine, also act as potent stimulators of insulin secretion, but their mechanism of action is unknown. We have used a truncated form of Kir6.2, which expresses independently of SUR1, to show that phentolamine does not inhibit KATP channels by interacting with SUR1. Instead, our results argue that phentolamine may interact directly with Kir6.2 to produce a voltage-independent reduction in channel activity. The single-channel conductance is unaffected. Although the ATP molecule also contains an imidazoline group, the site at which phentolamine blocks is not identical to the ATP-inhibitory site, because phentolamine block of an ATP-insensitive mutant (K185Q) is normal. KATP channels also are found in the heart where they are involved in the response to cardiac ischemia: they also are blocked by phentolamine. Our results suggest that this may be because Kir6.2, which is expressed in the heart, forms the pore of the cardiac KATP channel.

Proteinase inhibitors I and II from potatoes specifically block UV-induced activator protein-1 activation through a pathway that is independent of extracellular signal-regulated kinases, c-Jun N-terminal kinases, and P38 kinase

Solar UV irradiation is the causal factor for the increasing incidence of human skin carcinomas. The activation of the transcription factor activator protein-1 (AP-1) has been shown to be responsible for the tumor promoter action of UV light in mammalian cells. We demonstrate that proteinase inhibitor I (Inh I) and II (Inh II) from potato tubers, when applied to mouse epidermal JB6 cells, block UV-induced AP-1 activation. The inhibition appears to be specific for UV-induced signal transduction for AP-1 activation, because these inhibitors did not block UV-induced p53 activation nor did they exhibit any significant influence on epidermal growth factor-induced AP-1 transactivation. Furthermore, the inhibition of UV-induced AP-1 activity occurs through a pathway that is independent of extracellular signal-regulated kinases and c-Jun N-terminal kinases as well as P38 kinases. Considering the important role of AP-1 in tumor promotion, it is possible that blocking UV-induced AP-1 activity by Inh I or Inh II may be functionally linked to irradiation-induced cell transformation.

Molecular mechanism of use-dependent calcium channel block by phenylalkylamines: Role of inactivation

The role of channel inactivation in the molecular mechanism of calcium (Ca2+) channel block by phenylalkylamines (PAA) was analyzed by designing mutant Ca2+ channels that carry the high affinity determinants of the PAA receptor site [Hockerman, G. H., Johnson, B. D., Scheuer, T., and Catterall, W. A. (1995) J. Biol. Chem. 270, 22119–22122] but inactivate at different rates. Use-dependent block by PAAs was studied after expressing the mutant Ca2+ channels in Xenopus oocytes. Substitution of single putative pore-orientated amino acids in segment IIIS6 by alanine (F-1499-A, F-1500-A, F-1510-A, I-1514-A, and F-1515-A) gradually slowed channel inactivation and simultaneously reduced inhibition of barium currents (IBa) by (−)D600 upon depolarization by 100 ms steps at 0.1 Hz. This apparent reduction in drug sensitivity was only evident if test pulses were applied at a low frequency of 0.1 Hz and almost disappeared at the frequency of 1 Hz. (−)D600 slowed IBa recovery after maintained membrane depolarization (1–3 sec) to a comparable extent in all channel constructs. A drug-induced delay in the onset of IBa recovery from inactivation suggests that PAAs promote the transition to a deep inactivated channel conformation. These findings indicate that apparent PAA sensitivity of Ca2+ channels is not only defined by drug interaction with its receptor site but also crucially dependent on intrinsic gating properties of the channel molecule. A molecular model for PAA-Ca2+ channel interaction that accounts for the relationship between drug induced inactivation and channel block by PAA is proposed.

Permeant ion regulation of N-methyl-d-aspartate receptor channel block by Mg2+

Block of the channel of N-methyl-d-aspartate (NMDA) receptors by external Mg2+ (Mgo2+) has broad implications for the many physiological and pathological processes that depend on NMDA receptor activation. An essential property of channel block by Mgo2+ is its powerful voltage dependence. A widely cited explanation for the strength of the voltage dependence of block is that the Mgo2+-binding site is located deep in the channel of NMDA receptors; Mgo2+ then would sense most of the membrane potential field during block. However, recent electrophysiological and mutagenesis studies suggest that the blocking site cannot be deep enough to account for the voltage dependence of Mgo2+ block. Here we describe the basis for this discrepancy: the magnitude and voltage dependence of channel block by Mgo2+ are strongly regulated by external and internal permeant monovalent cations. Our data support a model in which access to the channel by Mgo2+ is prevented when permeant ion-binding sites at the external entrance to the channel are occupied. Mgo2+ can block the channel only when the permeant ion-binding sites are unoccupied and then can either unblock back to the external solution or permeate the channel. Unblock to the external solution is prevented if external permeant ions bind while Mg2+ blocks the channel, although permeation is still permitted. The model provides an explanation for the strength of the voltage dependence of Mgo2+ block and quantifies the interdependence of permanent and blocking ion binding to NMDA receptors.

Block of transmitter release by botulinum C1 action on syntaxin at the squid giant synapse

Electrophysiological, morphological, and biochemical approaches were combined to study the effect of the presynaptic injection of the light chain of botulinum toxin C1 into the squid giant synapse. Presynaptic injection was accompanied by synaptic block that occurred progressively as the toxin filled the presynaptic terminal. Neither the presynaptic action potential nor the Ca2+ currents in the presynaptic terminal were affected by the toxin. Biochemical analysis of syntaxin moiety in squid indicates that the light chain of botulinum toxin C1 lyses syntaxin in vitro, suggesting that this was the mechanism responsible for synaptic block. Ultrastructure of the injected synapses demonstrates an enormous increase in the number of presynaptic vesicles, suggesting that the release rather than the docking of vesicles is affected by biochemical lysing of the syntaxin molecule.