Structural effects and hydrogen bonds on N,N `-di(methoxycarbonylsulfenyl)urea, [CH(3)OC(O)SNH](2)CO, studied by experimental and theoretical methods

Pure N,N`-di(methoxycarbonylsulfenyl)urea, [CH(3)OC(O)SNH](2)CO, is quantitatively prepared by the hydrolysis reaction of CH(3)OC(O)SNCO and characterized by (1)H NMR, GC-MS and FTIR spectroscopy techniques. Structural and conformational properties are analyzed using a combined approach with data obtained from X-ray diffraction, vibrational spectra and theoretical calculation methods. The IR and Raman spectra for normal and deuterated species are reported. The crystal structure of [CH(3)OC(O)SNH](2)CO was determined by X-ray diffraction methods. The substance crystallizes in the orthorhombic P2(1)2(1)2 space group with a = 9.524(2), b = 12.003(1), c = 4.481 (1) angstrom, and Z = 2 moieties in the unit cell. The molecule is sited on a twofold crystallographic axis (C(2)) parallel to c and shows the anti-anti conformation (S-N single bonds antiperiplanar with respect to the opposite C-N single bonds in sulfenyl-urea-sic group). Neighboring molecules are arranged in a chain motif that extends along the C(2)-axis and is held by bifurcated NH center dot center dot center dot O center dot center dot center dot HN intermolecular bonds. A local planar symmetry is observed in the crystal for the central -SN(H)C(O)N(H)S- skeleton. Experimental and calculated data allow to trace this structural feature to the occurrence of N-H center dot center dot center dot O=C hydrogen bonding interactions. Calculated vibrational and structural properties are in good agreement with the experimentally determined features. (C) 2008 Elsevier B.V. All rights reserved.

Thermal characterization of dental composites by TG/DTG and DSC

Dental composites can be improved by heat treatment, as a possible way to increase mechanical properties due to additional cure (post-cure). Direct dental composites are essentially similar to the indirect ones, supposing they have the same indication. Therefore, to establish a heat treatment protocol for direct composites, using as indirect (photoactivated by continuous and pulse-delay techniques), a characterization (TG/DTG and DSC) is necessary to determine parameters, such as mass loss by thermal decomposition, heat of reaction and glass transition temperature (T (g)). By the results of this study, a heat treatment could be carried out above 160 A degrees C (above T (g), and even higher than the endset exothermic event) and under 180 A degrees C (temperature of significant initial mass loss).

Thermoanalytical Characterization and Dissolution Profiles Studies of Metronidazole Tablets

In the present study dissolution tests and thermoanalytical (TA) techniques were applied to metronidazole tablets from five laboratories (R, G, SA, SB, SC) available on the Brazilian market. The TA profiles indicated that in some formulations interactions between components led to eutectic products with lower melting points than metronidazole. The formulations SB and SC showed dissolution profiles that did not agree with published standards, confirming the TA results. All dissolution data were mathematically compared with kinetic models of release, demonstrating the main release mechanism was first order in all the tablets. The formulations were statistically compared by ANOVA and post-hoc tests (Tukey and Newman-Keuls), reveling significant differences in dissolution efficiency (DE).

ANALYSIS & STUDY OF AI TECHNIQUES FORAUTOMATIC CONDITION MONITORING OFRAILWAY TRACK INFRASTRUCTURE : Artificial Intelligence Techniques

Since the last decade the problem of surface inspection has been receiving great attention from the scientific community, the quality control and the maintenance of products are key points in several industrial applications.The railway associations spent much money to check the railway infrastructure. The railway infrastructure is a particular field in which the periodical surface inspection can help the operator to prevent critical situations. The maintenance and monitoring of this infrastructure is an important aspect for railway association.That is why the surface inspection of railway also makes importance to the railroad authority to investigate track components, identify problems and finding out the way that how to solve these problems. In railway industry, usually the problems find in railway sleepers, overhead, fastener, rail head, switching and crossing and in ballast section as well. In this thesis work, I have reviewed some research papers based on AI techniques together with NDT techniques which are able to collect data from the test object without making any damage. The research works which I have reviewed and demonstrated that by adopting the AI based system, it is almost possible to solve all the problems and this system is very much reliable and efficient for diagnose problems of this transportation domain. I have reviewed solutions provided by different companies based on AI techniques, their products and reviewed some white papers provided by some of those companies. AI based techniques likemachine vision, stereo vision, laser based techniques and neural network are used in most cases to solve the problems which are performed by the railway engineers.The problems in railway handled by the AI based techniques performed by NDT approach which is a very broad, interdisciplinary field that plays a critical role in assuring that structural components and systems perform their function in a reliable and cost effective fashion. The NDT approach ensures the uniformity, quality and serviceability of materials without causing any damage of that materials is being tested. This testing methods use some way to test product like, Visual and Optical testing, Radiography, Magnetic particle testing, Ultrasonic testing, Penetrate testing, electro mechanic testing and acoustic emission testing etc. The inspection procedure has done periodically because of better maintenance. This inspection procedure done by the railway engineers manually with the aid of AI based techniques.The main idea of thesis work is to demonstrate how the problems can be reduced of thistransportation area based on the works done by different researchers and companies. And I have also provided some ideas and comments according to those works and trying to provide some proposal to use better inspection method where it is needed.The scope of this thesis work is automatic interpretation of data from NDT, with the goal of detecting flaws accurately and efficiently. AI techniques such as neural networks, machine vision, knowledge-based systems and fuzzy logic were applied to a wide spectrum of problems in this area. Another scope is to provide an insight into possible research methods concerning railway sleeper, fastener, ballast and overhead inspection by automatic interpretation of data.In this thesis work, I have discussed about problems which are arise in railway sleepers,fastener, and overhead and ballasted track. For this reason I have reviewed some research papers related with these areas and demonstrated how their systems works and the results of those systems. After all the demonstrations were taking place of the advantages of using AI techniques in contrast with those manual systems exist previously.This work aims to summarize the findings of a large number of research papers deploying artificial intelligence (AI) techniques for the automatic interpretation of data from nondestructive testing (NDT). Problems in rail transport domain are mainly discussed in this work. The overall work of this paper goes to the inspection of railway sleepers, fastener, ballast and overhead.

Developing a Communication link between Agents and cross Platform IDE

The main objective of this thesis work is to develop communication link between Runrev Revolution (IDE) and JADE (Multi-Agent System) through Socket programming using TCP/IP layer. These two independent platforms are connected using socket programming technique. Socket programming is considered to be newly emerging technology among these two platforms, the work done in this thesis work is considered to be a prototype.A Graphical simulation model is developed by salixphere (Company in Hedemora) to simulate logistic problems using Runrev Revolution (IDE). The simulation software/program is called “BIOSIM”. The logistic problems are complex, and conventional optimization techniques are unlikely very successful. “BIOSIM” can demonstrate the graphical representation of logistic problems depending upon the problem domains. As this simulation model is developed in revolution programming language (Transcript) which is dynamically typed and English-like language, it is quite slow compared to other high level programming languages. The object of this thesis work is to add intelligent behaviour in graphical objects and develop communication link between Runrev revolution (IDE) and JADE (Multi-Agent System) using TCP/IP layers.The test shows the intelligent behaviour in the graphical objects and successful communication between Runrev Revolution (IDE) and JADE (Multi-Agent System).

Theoretical and experimental optical holography

The intent of this paper is to present an analysis of optical holography. Both the physical theory behind holography and the experimental techniques used in making holograms will be presented. To accomplish this goal, the paper is divided into two independent sections: the theoretical section followed by the experimental section. Each section is intended to be a complete unit. The Theoretical Section is an exposure to the theory behind holography. This consists of a review of the concepts of interference and diffraction. followed by a brief review of partial coherence. The remaining part of the Theoretical Section is devoted to the mathematical analysis of optical holography. The Experimental Section begins with an introduction to the equipment and facilities currently available for optical holography at Colby College. Holographic procedures is dominated by the description of transmission holography (v.s. reflection. or white-light. holography). After these general holographic procedures a few variations on the basic transmission hologram are presented. The experimental section will end with an introduction to holographic interferometry, a major application of holographic techniques.

O project finance no financiamento de empreendimentos em saneamento básico no Brasil

A situação atual dos sistemas de saneamento básico no Brasil, bem como o quadro regulatório e institucional do setor, são o resultado de conturbados antecedentes e de políticas descontínuas, determinadas por aspectos conjunturais e pela alternância entre momentos de maior e menor disponibilidade de recursos. A privatização e a concessão de serviços oferece perspectivas concretas de redefinição da trajetória de evolução do setor, com o estabelecimento de um padrão mais constante e regular de crescimento dos índices de cobertura e de modernização dos sistemas e das técnicas de gestão. A lógica do investimento privado implica na orientação pelo lucro e na configuração de estruturas de menor risco para os recursos comprometidos com o empreendimento. O project finance é uma técnica de financiamento que permite a repartição de riscos entre os participantes, reduzindo parcelas individuais e, conseqüentemente, agregando maior atratividade ao negócio. O presente estudo terá por objetivo analisar o setor de saneamento básico e o project finance, buscando identificar as possibilidades e os impactos presumíveis da introdução e difusão da técnica como alternativa de financiamento para o setor no Brasil.

Re-framing risk transfer to assess integrative partnership opportunities: the S.A.R. approach and the AIG/BID/CNO regional surety bond facility of 2007

Identificar, compartilhar e gerenciar os riscos de contratar são preocupações que impedem o estabelicmento e a administração das Parcerias Públicos Particulares (PPP). Porem, gerentes das entidades públicas, bancos de formento, construtoras e seguradoras pesquisam e utilizam muitas técnicas para enfrentar a avaliação e gerenciamento dos riscos. A transferência de risco é uma indicação dos chamados benefícios que são inspirados pelos PPP, contudo devido às realidades contratuais e conceptuais, a entidade de cede o risco (o partido público) permanece quase sempre como o portador final do risco. Conseqüentemente, o partido público retem um interesse de resistência na gerência total destes riscos cedidos. Esta dissertação explora alguns defeitos das aproximações comuns a conceituar a gestão de risco no contexto de um PPP. Focalizando os conceitos da interdependência e da reciprocidade e usando na decisão para transferir o risco do projeto, esta dissertação molda a decisão para transferir o risco nos termos das realidades interdependentes de relacionamentos sistemáticos, alargam os conceitos técnicos do risco e da avaliação de risco, considerando o uso reflexivo das diferenças na analise de um estudo de caso. O autor explora estes conceitos em uma análise da decisão de um gerente de risco da empresa de construção civil brasileira Construtora Norberto Odebrecht (ODB) para projetar uma facilidade inovadora da ligação de garantia com Inter-American Development Bank (BID) e uma seguradora, American International Group (AIG), um negócio que ganhe o reconhecimento Trade Finance Magazine’s 2007 deal of the year. O autor mostra que por compreender a transferência de risco nos termos abordados nesta dissertação, um atore que transfere o risco pode identificar e criar mais oportunidades de estabelecer relacionamentos em longo prazo, através dos processos que a literatura atual do PPP ainda não considere. Os resultados devem fornecer contribuições para a pesquisas sobre a transferência do risco do projeto, na cooperação entre organizações e na seleção do sócio do projeto do potencial.

Interface microstructure of alumina mechanically metallized with Ti brazed to Fe–Ni–Co using different fillers

NASCIMENTO,R.M. et al.Interface microstructure of alumina mechanically metallized with Ti brazed to Fe–Ni–Co using different fillers. Materials Science and Engineering A, v.466, n.1/2, p. 195-200, 2007.

Paraquat-loaded alginate/chitosan nanoparticles: Preparation, characterization and soil sorption studies

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Simultaneous activity of male and female gonads in intersex hermit crabs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphologic and molecular characterization of Myrciaria spp species

A jabuticabeira é considerada uma das fruteiras mais típicas do Brasil. Entretanto, há poucos estudos sobre esta planta na literatura, e mesmo sua classificação botânica é muito controvertida. Este trabalho faz comparações entre as espécies de jabuticabeiras, usando as técnicas de marcadores morfológicos (organografia) e moleculares RAPD. As características morfológicas das plantas, usadas como marcadores morfológicos, foram comparadas com espécimes presentes nos herbários dos Estados de São Paulo e Minas Gerais e com as descrições obtidas em revisão de literatura especializada. As diferenças moleculares entre as espécies foram determinadas por meio do uso de marcadores RAPD. O experimento foi realizado nas cidades de Piracicaba, Jaboticabal e Ituverava do Estado de São Paulo, Brasil. Diferenças morfológicas e moleculares entre as plantas estudadas foram identificadas, e quatro grupos distintos de espécies foram definidos: Myrciaria cauliflora (Mart.) O. Berg, M. coronata Mattos, M. jaboticaba (Vell.) O. Berg. e M. phytrantha (Kiaersk.) Mattos. A técnica de marcadores moleculares, aliada à técnica de marcadores morfológicos, mostrou ser uma ferramenta importante na identificação de espécies de jabuticabeiras.

Densitometric and biochemical values of broiler tibias at different ages

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Virulence characteristics and epidemiology of Yersinia enterocolitica and Yersiniae other than Y-pseudotuberculosis and Y-pestis isolated from water and sewage

Aims: To determine the species, bio-sero-phagetypes, antimicrobial drug resistance and also the pathogenic potential of 144 strains of Yersinia spp. isolated from water sources and sewage in Brazil.Methods and Results: the 144 Yersinia strains were characterized biochemically, serologically and had their antibiotic resistance and phenotypic virulence markers determined by microbiological and serological standard techniques. The Y. enterocolitica strains related to human diseases were also tested for the presence of virulence genes, by the PCR technique. The isolates were classified as Y. enterocolitica, Y. intermedia, Y. frederiksenii, Y. kristensenii and Yersinia biochemically atypical. The 144 isolates belonged to various bio-serogroups. Half of the strains showed resistance to three or more drugs. The Y. enterocolitica strains related to human diseases exhibited phenotypic virulence characteristics and virulence genes.Conclusions: Water from various sources and sewage are contaminated with Yersinia spp. in Brasil. Among these bacteria, virulent strains of Y. enterocolitica were found, with biotypes and serogroups related to human diseases.Significance and Impact of the Study: This is the first documented description of the occurrence of pathogenic Y. enterocolitica in water sources and sewage in Brazil. The occurrence of virulence strains of Y. enterocolitica shows that the environment is a potential source of human infection by this species in this country.

Frequency of Blastocystis hominis and other intestinal parasites in stool samples examined at the Parasitology Laboratory of the School of Pharmaceutical Sciences at the São Paulo State University, Araraquara

Blastocystis hominis é um protozoário, causador de infecção intestinal denominada blastocistose humana, cujo diagnóstico é realizado pelo exame coproparasitológico e por meio de técnicas de coloração permanente. Este estudo foi desenvolvido para avaliar a freqüência da infecção por Blastocystis hominis em habitantes da região de Araraquara/SP, bem como comparar diferentes métodos para a pesquisa desse protozoário em amostras de fezes. Foram estudadas 503 amostras de fezes submetidas ao exame direto a fresco, às técnicas de Faust e cols, Lutz e de Rugai e cols, além das colorações pela hematoxilina férrica, tricrômio e de Kinyoun modificada. Entre as 503 amostras examinadas, 174 (34,6%) apresentaram-se positivas para a presença de parasitas intestinais. O protozoário e o helminto mais freqüentes foram Entamoeba coli (14,6%) e Strongyloides stercoralis (6,7%), respectivamente. Blastocystis hominis foi observado em 23 (4,6%) amostras fecais com consistência predominantemente pastosa, não caracterizando quadro diarréico. Apesar da baixa freqüência de Blastocystis hominis encontrada na região de Araraquara, comparativamente a outras regiões brasileiras, é importante a realização do diagnóstico laboratorial desse protozoário. O encontro de Blastocystis hominis em material fecal é indicativo de contaminação de alimentos e água de consumo, desde que se admita a rota de transmissão oral-fecal desse parasita, o que implica na orientação da população sobre as medidas de saneamento básico e higiene como meio para se controlar problemas de saúde ocasionados pelos enteroparasitas.