Evaluation of hydroxyapatite cement for frontal sinus obliteration after mucocele resection

OBJECTIVES: To retrospectively evaluate our experience with frontal sinus obliteration using hydroxyapatite cement (BoneSource; Stryker Biotech Europe, Montreux, Switzerland) and compare it with fat obliteration over the approximate same period. Frontal sinus obliteration with hydroxyapatite cement represents a new technique for obliteration of the frontal sinus after mucocele resection. METHODS: Exploration of the frontal sinus was performed using bicoronal, osteoplastic flaps, with mucosal removal and duct obliteration with tissue glue and muscle or fascia. Flaps were elevated over the periorbita, and Silastic sheeting was used to protect the BoneSource material from exposure as it dried. The frontal table was replaced when appropriate. RESULTS: Sixteen patients underwent frontal sinus obliteration with fat (fat obliteration group), and 38 patients underwent obliteration with BoneSource (BoneSource group). Fat obliteration failed in 2 patients, who underwent subsequent BoneSource obliteration, and none of the patients in the BoneSource group has required removal of material because of recurrent complications. Frontobasal trauma (26 patients [68%] in the BoneSource group and 9 patients [56%] in the fat obliteration group) was the most common history of mucocele formation in both groups. Major complications in the BoneSource group included 1 patient with skin fistula, which was managed conservatively, and 1 patient with recurrent ethmoiditis, which was managed surgically. Both complications were not directly attributed to the use of BoneSource. Contour deficit of the frontal bone occurred in 1 patient in the fat obliteration group and in none in the BoneSource group. Two patients in the fat obliteration group had donor site complications (hematoma and infection). Thirteen patients in the BoneSource group had at least 1 prior attempt at mucocele drainage, and no statistical relation existed between recurrent surgery and preservation of the anterior table. CONCLUSION: Hydroxyapatite is a safe, effective material to obliterate frontal sinuses infected with mucoceles, with minimal morbidity and excellent postoperative contour.

Socioeconomic determinants of health related quality of life in childhood and adolescence: results from a European study

STUDY OBJECTIVE: The objective of this study was to investigate the impact of two different socioeconomic status (SES) measures on child and adolescent self reported health related quality of life (HRQoL). The European KIDSCREEN project aims at simultaneous developing, testing, and implementing a generic HRQoL instrument. DESIGN AND SETTING: The pilot version of the questionnaire was applied in school surveys to students from 8 to 18 years of age, as well as to their parents, together with such determinants of health status as two SES indicators, the parental educational status and the number of material goods in the family (FAS, family affluence scale). PARTICIPANTS: Students from seven European countries: 754 children (39.8%; mean: 9.8 years), and 1142 adolescents (60.2 %; mean: 14.1 years), as well as their respective parents. MAIN RESULTS: In children, a higher parental educational status was found to have a significant positive impact on the KIDSCREEN dimensions: physical wellbeing, psychological wellbeing, moods and emotions, bullying and perceived financial resources. Increased risk of low HRQoL was detected for adolescents in connection with their physical wellbeing. Family wealth plays a part for children's physical wellbeing, parent relations and home life, and perceived financial resources. For adolescents, family wealth furthermore predicts HRQoL on all KIDSCREEN dimensions. CONCLUSIONS: There is evidence to suggest that exposure to low parental educational status may result in a decreased HRQoL in childhood, whereas reduced access to material (and thereby social) resources may lead to a lower HRQoL especially in adolescence.

Invitational rhetoric : alternative rhetorical strategy for transformation of perception and use of energy in the residential built environment from the Keweenaw to Kerala

This dissertation explores the viability of invitational rhetoric as a mode of advocacy for sustainable energy use in the residential built environment. The theoretical foundations for this study join ecofeminist concepts and commitments with the conditions and resources of invitational rhetoric, developing in particular the rhetorical potency of the concepts of re-sourcement and enfoldment. The methodological approach is autoethnography using narrative reflection and journaling, both adapted to and developed within the autoethnographic project. Through narrative reflection, the author explores her lived experiences in advocating for energy-responsible residential construction in the Keweenaw Peninsula of Michigan. The analysis reveals the opportunities for cooperative, collaborative advocacy and the struggle against traditional conventions of persuasive advocacy, particularly the centrality of the rhetor. The author also conducted two field trips to India, primarily the state of Kerala. Drawing on autoethnographic journaling, the analysis highlights the importance of sensory relations in lived advocacy and the resonance of everyday Indian culture to invitational principles. Based on field research, the dissertation proposes autoethnography as a critical development in encouraging invitational rhetoric as an alternative mode of effecting change. The invitational force of autoethnography is evidenced in portraying the material advocacy of the built environment itself, specifically the sensual experience of material arrangements and ambience, as well as revealing the corporeality of advocacy, that is, the body as the site of invitational engagement, emotional encounter, and sensory experience. This study concludes that vulnerability of self in autoethnographic work and the vulnerability of rhetoric as invitational constitute the basis for transformation. The dissertation confirms the potential of an ecofeminist invitational advocacy conveyed autoethnographically for transforming perceptions and use of energy in a smaller-scale residential environment appropriate for culture, climate, and ultimately part of the challenge of sustaining life on this planet.

Development and modeling of thermally conductive resins for fuel cell bipolar plate applications

Thermally conductive resins are a class of material that show promise in many different applications. One growing field for their use is in the area of bipolar plate technology for fuel cell applications. In this work, a LCP was mixed with different types of carbon fillers to determine the effects of the individual carbon fillers on the thermal conductivity of the composite resin. In addition, mathematical modeling was performed on the thermal conductivity data with the goal of developing predictive models for the thermal conductivity of highly filled composite resins.

Analysis of a Non-Traditional Micro Tube Hydroforming Process

As the demand for miniature products and components continues to increase, the need for manufacturing processes to provide these products and components has also increased. To meet this need, successful macroscale processes are being scaled down and applied at the microscale. Unfortunately, many challenges have been experienced when directly scaling down macro processes. Initially, frictional effects were believed to be the largest challenge encountered. However, in recent studies it has been found that the greatest challenge encountered has been with size effects. Size effect is a broad term that largely refers to the thickness of the material being formed and how this thickness directly affects the product dimensions and manufacturability. At the microscale, the thickness becomes critical due to the reduced number of grains. When surface contact between the forming tools and the material blanks occur at the macroscale, there is enough material (hundreds of layers of material grains) across the blank thickness to compensate for material flow and the effect of grain orientation. At the microscale, there may be under 10 grains across the blank thickness. With a decreased amount of grains across the thickness, the influence of the grain size, shape and orientation is significant. Any material defects (either natural occurring or ones that occur as a result of the material preparation) have a significant role in altering the forming potential. To date, various micro metal forming and micro materials testing equipment setups have been constructed at the Michigan Tech lab. Initially, the research focus was to create a micro deep drawing setup to potentially build micro sensor encapsulation housings. The research focus shifted to micro metal materials testing equipment setups. These include the construction and testing of the following setups: a micro mechanical bulge test, a micro sheet tension test (testing micro tensile bars), a micro strain analysis (with the use of optical lithography and chemical etching) and a micro sheet hydroforming bulge test. Recently, the focus has shifted to study a micro tube hydroforming process. The intent is to target fuel cells, medical, and sensor encapsulation applications. While the tube hydroforming process is widely understood at the macroscale, the microscale process also offers some significant challenges in terms of size effects. Current work is being conducted in applying direct current to enhance micro tube hydroforming formability. Initially, adding direct current to various metal forming operations has shown some phenomenal results. The focus of current research is to determine the validity of this process.

Siliceous Sponge Spicules of the Quadrant Formation from Montana.

A sponge spicule is a siliceous or calcareous individual or group of rays which form a framework for the sponge. Sponge spicules are very delicate and easily broken. The methods used in obtaining micro-fossils vary considerably with the type of material from which they are to be recovered and the frailness of the fossil obtained.

Razor Thin Win: The 1972 Constitution Ballot, Campaign, Ratification & the Courts -- Mae Nan (Robinson) Ellingson & Mick McKeon “In the Crucible of Change”

Beyond the challenge of crafting a new state Constitution that empowered the people and modernized and opened up state and local government in Montana, the Constitutional Convention delegates, as they signed the final document, looked forward to the arduous task of getting it ratified by the electorate in a short ten week period between the end of the convention on March 24 and the ratification election of June 6, 1972. While all 100 delegates signed the draft Constitution, not all supported its adoption. But the planning about how to get it adopted went back to the actions of the Convention itself, which carefully crafted a ballot that kept “hot political issues” from potentially killing the entire document at the polls. As a result, three side issues were presented to the electorate on the ballot. People could vote for or against those side issues and still vote to ratify the entire document. Thus, the questions of legalizing gambling, having a unicameral legislature and retaining the death penalty were placed separately on the ballot (gambling passed, as did the retention of the death penalty, but the concept of a one-house legislature was defeated). Once the ballot structure was set, delegates who supported the new Constitution organized a grassroots, locally focused effort to secure ratification – thought hampered by a MT Supreme Court decision on April 28 that they could not expend $45,000 in public monies that they had set aside for voter education. They cobbled together about $10,000 of private money and did battle with the established political forces, led by the MT Farm Bureau, MT Stockgrowers’ Assn. and MT Contractors Assn., on the question of passage. Narrow passage of the main document led to an issue over certification and a Montana Supreme Court case challenging the ratification vote. After a 3-2 State Supreme Court victory, supporters of the Constitution then had to defend the election results again before the federal courts, also a successful effort. Montana finally had a new progressive State Constitution that empowered the people, but the path to it was not clear and simple and the win was razor thin. The story of that razor thin win is discussed in this chapter by the two youngest delegates to the 1972 Constitutional Convention, Mae Nan Ellingson of Missoula and Mick McKeon, then of Anaconda. Both recognized “Super Lawyers in their later professional practices were also significant players in the Constitutional Convention itself and actively participated in its campaign for ratification. As such, their recollections of the effort provide an insider’s perspective of the struggle to change Montana for the better through the creation and adoption of a new progressive state Constitution “In the Crucible of Change.” Mae Nan (Robinson) Ellingson was born Mae Nan Windham in Mineral Wells, TX and graduated from Mineral Wells High School in 1965 and Weatherford College in Weatherford, TX in 1967. Mae Nan was the youngest delegate at the 1972 Convention from Missoula. She moved to Missoula in 1967 and received her BA in Political Science with Honors from the University of MT in 1970. She was a young widow known by her late husband’s surname of Robinson while attending UM graduate school under the tutelage of noted Professor Ellis Waldron when he persuaded her to run for the Constitutional Convention. Coming in a surprising second in the delegate competition in Missoula County she was named one of the Convention’s “Ten Outstanding Constitutional Convention Delegates,” an impressive feat at such a young age. She was 24 at the time, the youngest person to serve at the ConCon, and one of 19 women out of 100 delegates. In the decade before the Convention, there were never more than three women Legislators in any session, usually one or two. She was a member of the American Association of University Women, a Pi Sigma Alpha political science honorary, and a Phi Alpha Theta historical honorary. At the Convention, she led proposals for the state's bill of rights, particularly related to equal rights for women. For years, Ellingson kept a copy of the preamble to the Constitution hanging in her office; while all the delegates had a chance to vote on the wording, she and delegate Bob Campbell are credited with the language in the preamble. During the convention, she had an opportunity that opened the door to her later career as an attorney. A convention delegate suggested to her that she should go to law school. Several offered to help, but at the time she couldn't go to school. Her mom had died in Texas, and she ended up with a younger brother and sister to raise in Missoula. She got a job teaching, but about a year later, intrigued with the idea of pursuing the law as a career, she called the man back to ask about the offer. Eventually another delegate, Dave Drum of Billings, sponsored her tuition at the UM School of Law. After receiving her JD with Honors (including the Law Review and Moot Court) from the UM Law School Ellingson worked for the Missoula city attorney's office for six years (1977-83), and she took on landmark projects. During her tenure, Missoula became the first city to issue open space bonds, a project that introduced her to Dorsey & Whitney. The city secured its first easement on Mount Sentinel, and it created the trail along the riverfront with a mix of playing fields and natural vegetation. She also helped develop a sign ordinance for the city of Missoula. She ended up working as bond counsel for Dorsey & Whitney, and she opened up the firm's full-fledged Missoula office after commuting a couple of years to its Great Falls office. She was a partner at Dorsey Whitney, working there from 1983 until her retirement in 2012. The area of law she practiced there is a narrow specialty - it requires knowledge of constitutional law, state and local government law, and a slice of federal tax law - but for Ellingson it meant working on great public projects – schools, sewer systems, libraries, swimming pools, ire trucks. At the state level, she helped form the Montana Municipal Insurance Authority, a pooled insurance group for cities. She's shaped MT’s tax increment law, and she was a fixture in the MT Legislature when they were debating equal rights. As a bond lawyer, though, Ellingson considers her most important work for the state to be setting up the Intercap Program that allowed local governments to borrow money from the state at a low interest rate. She has been a frequent speaker at the League of Cities and Towns, the Montana Association of Counties, and the Rural Water Users Association workshops on topics related to municipal finance, as well as workshops sponsored by the DNRC, the Water and Sewer Agencies Coordination Team, and the Montana State University Local Government Center. In 2002, she received an outstanding service award from the Montana Rural Water Users Association. In addition to being considered an expert on Montana state and constitutional law, local government law and local government finance, she is a frequent teacher at the National Association of Bond Lawyers (NABL) Fundamentals of Municipal Bond Law Seminar and the NABL Bond Attorney’s Workshop. For over 30 years Mae Nan has participated in the drafting of legislation in Montana for state and local finance matters. She has served on the Board of Directors of NABL, as Chairman of its Education Committee, was elected as an initial fellow in 1995 to the American College of Bond Counsel, and was recognized as a Super Lawyer in the Rocky Mountain West. Mae Nan was admitted to practice before the MT and US Supreme Courts, was named one of “America’s Leading Business Lawyers” by Chambers USA (Rank 1), a Mountain States Super Lawyer in 2007 and is listed in Best Lawyers in America; she is a member and former Board Member of NABL, a Fellow of the American College of Bond Counsel and a member of the Board of Visitors of the UM Law School. Mae Nan is also a philanthropist who serves on boards and applies her intelligence to many organizations, such as the Missoula Art Museum. [Much of this biography was drawn from a retirement story in the Missoulian and the Dorsey Whitney web site.] Mick McKeon, born in Anaconda in 1946, is a 4th generation Montanan whose family roots in this state go back to the 1870’s. In 1968 he graduated from Notre Dame with a BA in Communications and received a Juris Doctorate degree from the University of Montana Law School in 1971. Right after graduating from law school, Mick was persuaded by his father, longtime State Senator Luke McKeon, and his uncle, Phillips County Attorney Willis McKeon, to run for delegate to Montana’s Constitutional Convention and was elected to represent Deer Lodge, Philipsburg, Powell, and part of Missoula Counties. Along with a coalition of delegates from Butte and Anaconda, he fought through the new Constitution to eliminate the legal strangle hold, often called “the copper collar,” that corporate interests -- the Anaconda Company and its business & political allies -- had over state government for nearly 100 years. The New York Times called Montana’s Constitutional Convention a “prairie revolution.” After helping secure the ratification of the new Constitution, Mick began his practice of law in Anaconda where he engaged in general practice for nearly 20 years. Moving to Butte in 1991, Mick focused has practice in personal injury law, representing victims of negligence and corporate wrongdoing in both Montana district courts and federal court. As such, he participated in some of the largest cases in the history of the state. In 1992 he and his then law partner Rick Anderson obtained a federal court verdict of $11.5 million -- the largest verdict in MT for many years. Mick’s efforts on behalf of injured victims have been recognized by many legal organizations and societies. Recently, Mick was invited to become a member of the International Academy of Trial Lawyers - 600 of the top lawyers in the world. Rated as an American Super Lawyer, he has continuously been named one of the Best Lawyers in America, and an International Assn. of Trial Lawyers top 100 Trial Lawyer. In 2005, he was placed as one of Montana’s top 4 Plaintiff’s lawyers by Law Dragon. Mick is certified as a civil trial specialist by the National Board of Trial Advocacy and has the highest rating possible from Martindale-Hubble. Mick was awarded the Montana Trial Lawyers Public Service Award and provided pro bono assistance to needy clients for his entire career. Mick’s law practice, which he now shares with his son Michael, is limited to representing individuals who have been injured in accidents, concentrating on cases against insurance companies, corporations, medical providers and hospitals. Mick resides in Butte with his wife Carol, a Butte native. Mick, Carol, Michael and another son, Matthew, who graduated from Dartmouth College and was recently admitted to the Montana bar, enjoy as much of their time together in Butte and at their place on Flathead Lake.

RFID Transponders : Link between information and material flows. How reliable are identification procedures?

Along with the growing complexity of logistic chains the demand for transparency of informations has increased. The use of intelligent RFID-Technology offers the possibility to optimize and control all capacities in use, since it enables the identification and tracking of goods alongside the entire supply chain. Every single product can be located at any given time and a multitude of current and historical data can be transferred. The interaction of the flow of material and the flow of information between the various process steps can be optimized by using RFID-Technology since it guarantees that all required data is available at the right time and at the right place. The local accessibility and convertibility of data allows a flexible, decentralised control of logistic systems. As additional advantages of RFID-Components can be considered that they are individually writable and that their identification can be achieved over considerable distances even if there is no intervisibility between tag and reader. The use of RFID-Transponder opens up new potentials regarding process security, reduction of logistic costs or availability of products. These advantages depend on reliability of the identification processes. The undisputed potentials that are made accessible by the use of RFID-Elements can only be beneficial when the informations that are decentralised and attached to goods and loading equipment can be reliably retrieved at the required points. The communication between tag and reader can be influenced by different materials such as metal, that can disturbed or complicate the radio contact. The communications reliability is subject of various tests and experiments that analyse the effects of different filling materials as well as different alignments of tags on the loading equipment.

Control concept for autonomous changeable material flow systems

Today’s material flow systems for mass customization or dynamic productions are usually realized with manual transportation systems. However new concepts in the domain of material flow and device control like function-oriented modularization and intelligent multi-agent-systems offer the possibility to employ changeable and automated material flow systems in dynamic production structures. These systems need the ability to react on unplanned and unexpected events autonomously.

Dynamic merge of discrete goods flow – Impact on throughput and efficiency

Continuous conveyors with a dynamic merge were developed with adaptable control equipment to differentiate these merges from competing Stop-and-Go merges. With a dynamic merge, the partial flows are manipulated by influencing speeds so that transport units need not stop for the merge. This leads to a more uniform flow of materials, which is qualitatively observable and verifiable in long-term measurements. And although this type of merge is visually mesmerizing, does it lead to advantages from the view of material flow technology? Our study with real data indicates that a dynamic merge shows a 24% increase in performance, but only for symmetric or nearly symmetric flows. This performance advantage decreases as the flows become less symmetric, approaching the throughput of traditional Stop-and-Go merges. And with a cost premium for a continuous merge of approximately 10% due to the additional technical components (belt conveyor, adjustable drive engines, software, etc.), this restricts their economical use.

Proceedings of the Eighth Annual Biochemical Engineering Symposium

Contents"Effects of Swell-Shear Treatment on the Digestibility of Cellulosics", Dou-Houng Hwang, UMC "Application of Material and Energy Balance Regularities to Biomass Production from Cellulosic Substrates", Y.H. Lee, KSU "Immobilization of Aspergillus niger beta-Xylosidase", Gbekeloluwa B. Oguntimein, ISU "The Effect of the Major Structural Parameters of Cellulose on Enzymatic Hydrolysis", David H. Beardmore, Y.H. Lee, and L.T. Fan, KSU "Purification of a High Molecular Weight Hemicellulase", Ricardo A. Fournier, ISU "Aerobic Fermentation of Banana Pulp by Aspergillus Fumigatus", Stephen Lorbert, UMC "Purification and Properties of Two Very Small Xylanases", Chih-hen Kiang, ISU "Testing Theoretical Models for Cellulose Enzymatic Hydrolysis", Lin-Chang Chiang, UMC "Utilization of Material and Energy Balances in Hydrocarbon Fermentation", Alexis Ferrer, KSU "Purification of a Series of Closely Related Xylanases", Mary M. Frederick, ISU

Water versus ice: The competing roles of modern climate and Pleistocene glacial erosion in the Central Alps of Switzerland

Recent studies have identified relationships between landscape form, erosion and climate in regions of landscape rejuvenation, associated with increased denudation. Most of these landscapes are located in non-glaciated mountain ranges and are characterized by transient geomorphic features. The landscapes of the Swiss Alps are likewise in a transient geomorphic state as seen by multiple knickzones. In this mountain belt, the transient state has been related to erosional effects during the Late Glacial Maximum (LGM). Here, we focus on the catchment scale and categorize hillslopes based on erosional mechanisms, landscape form and landcover. We then explore relationships of these variables to precipitation and extent of LGM glaciers to disentangle modern versus palaeo controls on the modern shape of the Alpine landscape. We find that in grasslands, the downslope flux of material mainly involves unconsolidated material through hillslope creep, testifying a transport-limited erosional regime. Alternatively, strength-limited hillslopes, where erosion is driven by bedrock failure, are covered by forests and/or expose bedrock, and they display oversteepened hillslopes and channels. There, hillslope gradients and relief are more closely correlated with LGM ice occurrence than with precipitation or the erodibility of the underlying bedrock. We relate the spatial occurrence of the transport- and strength-limited process domains to the erosive effects of LGM glaciers. In particular, strength-limited, rock dominated basins are situated above the equilibrium line altitude (ELA) of the LGM, reflecting the ability of glaciers to scour the landscape beyond threshold slope conditions. In contrast, transport-limited, soil-mantled landscapes are common below the ELA. Hillslopes covered by forests occupy the elevations around the ELA and are constrained by the tree line. We conclude that the current erosional forces at work in the Central Alps are still responding to LGM glaciation, and that the modern climate has not yet impacted on the modern landscape.

Characteristics, Distribution and Persistence of Thin Layers Over a 48 Hour Period

The biological and physical processes contributing to planktonic thin layer dynamics were examined in a multidisciplinary study conducted in East Sound, Washington, USA between June 10 and June 25, 1998. The temporal and spatial scales characteristic of thin layers were determined using a nested sampling strategy utilizing 4 major types of platforms: (1) an array of 3 moored acoustical instrument packages and 2 moored optical instrument packages that recorded distributions and intensities of thin layers; (2) additional stationary instrumentation deployed outside the array comprised of meteorological stations, wave-tide gauges, and thermistor chains; (3) a research vessel anchored 150 m outside the western edge of the array; (4) 2 mobile vessels performing basin-wide surveys to define the spatial extent of thin layers and the physical hydrography of the Sound. We observed numerous occurrences of thin layers that contained locally enhanced concentrations of material; many of the layers persisted for intervals of several hours to a few days. More than one persistent thin layer may be present at any one time, and these spatially distinct thin layers often contain distinct plankton assemblages. The results suggest that the species or populations comprising each distinct thin layer have responded to different sets of biological and/or physical processes. The existence and persistence of planktonic thin layers generates extensive biological heterogeneity in the water column and may be important in maintaining species diversity and overall community structure.

Experimental, theoretical and numerical investigation of the nonlinear micromechanical properties of bone

Aging societies suffer from an increasing incidence of bone fractures. Bone strength depends on the amount of mineral measured by clinical densitometry, but also on the micromechanical properties of the bone hierarchical organization. A good understanding has been reached for elastic properties on several length scales, but up to now there is a lack of reliable postyield data on the lower length scales. In order to be able to describe the behavior of bone at the microscale, an anisotropic elastic-viscoplastic damage model was developed using an eccentric generalized Hill criterion and nonlinear isotropic hardening. The model was implemented as a user subroutine in Abaqus and verified using single element tests. A FE simulation of microindentation in lamellar bone was finally performed show-ing that the new constitutive model can capture the main characteristics of the indentation response of bone. As the generalized Hill criterion is limited to elliptical and cylindrical yield surfaces and the correct shape for bone is not known, a new yield surface was developed that takes any convex quadratic shape. The main advantage is that in the case of material identification the shape of the yield surface does not have to be anticipated but a minimization results in the optimal shape among all convex quadrics. The generality of the formulation was demonstrated by showing its degeneration to classical yield surfaces. Also, existing yield criteria for bone at multiple length scales were converted to the quadric formulation. Then, a computational study to determine the influence of yield surface shape and damage on the in-dentation response of bone using spherical and conical tips was performed. The constitutive model was adapted to the quadric criterion and yield surface shape and critical damage were varied. They were shown to have a major impact on the indentation curves. Their influence on indentation modulus, hardness, their ratio as well as the elastic to total work ratio were found to be very well described by multilinear regressions for both tip shapes. For conical tips, indentation depth was not a significant fac-tor, while for spherical tips damage was insignificant. All inverse methods based on microindentation suffer from a lack of uniqueness of the found material properties in the case of nonlinear material behavior. Therefore, monotonic and cyclic micropillar com-pression tests in a scanning electron microscope allowing a straightforward interpretation comple-mented by microindentation and macroscopic uniaxial compression tests were performed on dry ovine bone to identify modulus, yield stress, plastic deformation, damage accumulation and failure mecha-nisms. While the elastic properties were highly consistent, the postyield deformation and failure mech-anisms differed between the two length scales. A majority of the micropillars showed a ductile behavior with strain hardening until failure by localization in a slip plane, while the macroscopic samples failed in a quasi-brittle fashion with microcracks coalescing into macroscopic failure surfaces. In agreement with a proposed rheological model, these experiments illustrate a transition from a ductile mechanical behavior of bone at the microscale to a quasi-brittle response driven by the growth of preexisting cracks along interfaces or in the vicinity of pores at the macroscale. Subsequently, a study was undertaken to quantify the topological variability of indentations in bone and examine its relationship with mechanical properties. Indentations were performed in dry human and ovine bone in axial and transverse directions and their topography measured by AFM. Statistical shape modeling of the residual imprint allowed to define a mean shape and describe the variability with 21 principal components related to imprint depth, surface curvature and roughness. The indentation profile of bone was highly consistent and free of any pile up. A few of the topological parameters, in particular depth, showed significant correlations to variations in mechanical properties, but the cor-relations were not very strong or consistent. We could thus verify that bone is rather homogeneous in its micromechanical properties and that indentation results are not strongly influenced by small de-viations from the ideal case. As the uniaxial properties measured by micropillar compression are in conflict with the current literature on bone indentation, another dissipative mechanism has to be present. The elastic-viscoplastic damage model was therefore extended to viscoelasticity. The viscoelastic properties were identified from macroscopic experiments, while the quasistatic postelastic properties were extracted from micropillar data. It was found that viscoelasticity governed by macroscale properties has very little influence on the indentation curve and results in a clear underestimation of the creep deformation. Adding viscoplasticity leads to increased creep, but hardness is still highly overestimated. It was possible to obtain a reasonable fit with experimental indentation curves for both Berkovich and spherical indenta-tion when abandoning the assumption of shear strength being governed by an isotropy condition. These results remain to be verified by independent tests probing the micromechanical strength prop-erties in tension and shear. In conclusion, in this thesis several tools were developed to describe the complex behavior of bone on the microscale and experiments were performed to identify its material properties. Micropillar com-pression highlighted a size effect in bone due to the presence of preexisting cracks and pores or inter-faces like cement lines. It was possible to get a reasonable fit between experimental indentation curves using different tips and simulations using the constitutive model and uniaxial properties measured by micropillar compression. Additional experimental work is necessary to identify the exact nature of the size effect and the mechanical role of interfaces in bone. Deciphering the micromechanical behavior of lamellar bone and its evolution with age, disease and treatment and its failure mechanisms on several length scales will help preventing fractures in the elderly in the future.

Specimen specific parameter identification of ovine lumbar intervertebral discs: On the influence of fibre-matrix and fibre-fibre shear interactions.

Numerical models of the intervertebral disc, which address mechanical questions commonly make use of the difference in water content between annulus and nucleus, and thus fluid and solid parts are separated. Despite this simplification, models remain complex due to the anisotropy and nonlinearity of the annulus and regional variations of the collagen fibre density. Additionally, it has been shown that cross-links make a large contribution to the stiffness of the annulus. Because of this complex composite structure, it is difficult to reproduce several sets of experimental data with one single set of material parameters. This study addresses the question to which extent the ultrastructure of the intervertebral disc should be modelled so that its moment-angle behaviour can be adequately described. Therefore, a hyperelastic constitutive law, based on continuum mechanical principles was derived, which does not only consider the anisotropy from the collagen fibres, but also interactions among the fibres and between the fibres and the ground substance. Eight ovine lumbar intervertebral discs were tested on a custom made spinal loading simulator in flexion/extension, lateral bending and axial rotation. Specimen-specific geometrical models were generated using CT images and T2 maps to distinguish between annulus fibrosus and nucleus pulposus. For the identification of the material parameters the annulus fibrosus was described with two scenarios: with and without fibre-matrix and fibre-fibre interactions. Both scenarios showed a similar behaviour on a load displacement level. Comparing model predictions to the experimental data, the mean RMS of all specimens and all load cases was 0.54±0.15° without the interaction and 0.54±0.19° when the fibre-matrix and fibre-fibre interactions were included. However, due to the increased stiffness when cross-links effects were included, this scenario showed more physiological stress-strain relations in uniaxial and biaxial stress states. Thus, the present study suggests that fibre-matrix and fibre-fibre interactions should be considered in the constitutive law when the model addresses questions concerning the stress field of the annulus fibrosus.