Application of alkaline waste from pulp industry to acid soil with pine

In Brazil extensive areas are covered with pine forests, planted for pulp and paper production. This industry generates solid alkaline waste, such as dregs. The application of this dregs to forest soils is an alternative for soil acidity correction and plant nutrient supply, as well as a solution for its proper disposal. The purpose of this study was to compare the residual effect of surface application of dregs and dolomitic lime on (a) changes in the physical and chemical properties of an acidic soil and (b) pine tree development. The experiment was carried out in 2004 in Bocaina do Sul, Santa Catarina, consisting of the application of increasing dreg and lime rates to a Pinus taeda L. production area, on a Humic Cambisol, in a randomized block design with four replications and 10 x 10 m plots. The treatments consisted of levels of soil acidity amendments corresponding to the recommendations by the SMP method to reach pH 5.5 in the 0-20 cm layer, as follows: no soil amendment; dregs at 5.08 (1/4 SMP), 10.15 (1/2 SMP) and 20.3 Mg ha-1 (1 SMP); and lime at 8.35 (1/2 SMP) and 16.7 Mg ha-1 (1 SMP). Soil layers were sampled in 2010 for analyses of soil chemical and physical properties. The diameter at breast height of the 6.5 year old pine trees was also evaluated. Surface application of dregs improved soil chemical fertility by reducing acidity and increasing base saturation, similar to liming, especially in surface layers. Dregs, comparable to lime, reduced the degree of clay flocculation, but did not affect the soil physical quality. There was no effect of the amendments on increase in pine tree diameter. Thus, the alternative to raise the pH in forest soils to 5.5 with dregs is promising for the forestry sector with a view to dispose of the waste and increase soil fertility.

Procedure to characterize microroughness of optical thin films: application to ion-beam-sputtered vacuum-ultraviolet coatings

A method for characterizing the microroughness of samples in optical coating technology is developed. Measurements over different spatial-frequency ranges are composed into a single power spectral density (PSD) covering a large bandwidth. This is followed by the extraction of characteristic parameters through fitting of the PSD to a suitable combination of theoretical models. The method allows us to combine microroughness measurements performed with different techniques, and the fitting procedure can be adapted to any behavior of a combined PSD. The method has been applied to a set of ion-beam-sputtered fluoride vacuum-UV coatings with increasing number of alternative low- and high-index layers. Conclusions about roughness development and microstructural growth are drawn.

Ammonia volatilization and yield components after application of polymer-coated urea to maize

A form of increasing the efficiency of N fertilizer is by coating urea with polymers to reduce ammonia volatilization. The aim of this study was to evaluate the effect of polymer-coated urea on the control of ammonia volatilization, yield and nutritional characteristics of maize. The experiment was carried out during one maize growing cycle in 2009/10 on a Geric Ferralsol, inUberlândia, MG, Brazil. Nitrogen fertilizers were applied as topdressing on the soil surface in the following urea treatments: polymer-coated urea at rates of 45, 67.5 and 90 kg ha-1 N and one control treatment (no N), in randomized blocks with four replications. Nitrogen application had a favorable effect on N concentrations in leaves and grains, Soil Plant Analysis Development (SPAD) chlorophyll meter readings and on grain yield, where as coated urea had no effect on the volatilization rates, SPAD readings and N leaf and grain concentration, nor on grain yield in comparison to conventional fertilization.

Evaluation des pratiques d'irrigation, de fertilisation et d'application de pesticides dans l'agriculture périurbaine de Dakar, Sénégal

RESUMEL'agriculture urbaine et périurbalne - nommée ci-après AU - est un thème fort de recherche transversale, au vu des nombreux enjeux économiques, sociaux et environnementaux. L'objectif de cette recherche était de contribuer à une meilleure connaissance des processus de transfert de polluants et du cycle des nutriments à l'échelle locale, afin de déterminer sous quelles conditions l'AU de Dakar peut être pratiquée sans porter atteinte à la santé et à l'environnement.Une approche basée sur l'étude des processus géochimiques dans ie sol jusqu'à la nappe a été choisie, à l'échelle de la parcelle cultivée et à une échelle un peu plus large de la zone périurbaine de Dakar pour déterminer les influences du type d'occupation du sol.L'évaluation des impacts de l'irrigation avec des eaux usées brutes et des eaux de nappe saumâtres sur la qualité des sols (chapitre 2) a montré que l'alcalinité et les teneurs en calcium élevées des eaux saumâtres induisent la précipitation de CaC03 dans l'horizon superficiel du sol. Na remplace consécutivement Ca sur le complexe argilo-humique du sol et les bicarbonates diminuent dans la solution du sol. Le carbone organique dissout (COD) augmente significativement dans la solution du sol et dans la nappe sous-jacente. Malgré l'alcalinité et les teneurs très élevées en calcium des eaux usées, il y a peu de précipitation de CaC03 dans l'horizon superficiel du sol et une faible augmentation du sodium échangeable ESP. La nitrification de l'ammonium des eaux usées (moy 190mg/L à Pikine) produit des protons, qui ne sont plus tamponnés par les bicarbonates exportés hors du profil. Il y a alors une nette baisse de pH des sols irrigués par des eaux usées non traitées. Les sols irrigués par des eaux usées et saumâtres stockent moins de C et Ν que les sols de référence.L'évaluation de l'influence de l'occupation des sols en zone périurbaine sur à la nappe phréatique peu profonde (chapitre 3) a permis de déterminer les traceurs représentatifs de l'occupation du sol, à savoir Br/CI, NO3/CI et δ180-Ν03 pour l'irrigation par des eaux usées, pH et δ15Ν-Ν03 pour l'irrigation par des eaux de nappe, et Rb+Cr et Κ pour les lixiviats de fosses septiques. Ce chapitre a mis en évidence des points importants de la dynamique de l'azote en zone périurbaine sous deux occupations du sol : (1) la dénitrification est un processus important dans l'agrosystème périurbain de Dakar en bas de dune, dans les gleysols où l'on trouve des conditions temporairement réduites et un substrat organique favorables aux microorganismes de la dénitrification. Les teneurs en nitrates sont presque nulles avec irrigation d'eau de nappe. (2) en bas de pente, mais avec irrigation quotidienne par les eaux usées, l'apport continu d'ammonium inhibe probablement la dénitrification, mais favorise la volatilisation. (3) la nitrification de l'ammonium dans la nappe lors de la lixiviation des fosses septiques se distingue de la nitrification de l'ammonium dans la zone non saturée dans la zone d'agriculture périurbaine par la composition isotopique de l'oxygène de l'eau. Une comparaison des flux d'azote entre l'agrosystème et les quartiers périurbains de Dakar (chapitre 4) ont révélé que ces derniers étaient du même ordre de grandeur par unité de surface, à savoir 2-4 tonnes Ν /ha/an.L'évaluation des flux de pesticides dans l'agrosystème et des risques induits pour les eaux souterraines (chapitre 5) a révélé un fiux total de pesticides de 60kg/ha/an, totalisant 15 matières actives. Seules deux de ces matières actives sont autorisées par le comité des pesticides sahélien. Les pesticides les plus utilisés par les producteurs sont l'organochloré dicofol, les organophosphorés methamidophos, dimethoate et fenithrotion ainsi que le cabamate methomyl. Les flux les plus importants sont de 9 à 7 kg/ha/an (methomyl, methamidophos, ethoprophos et dicofol). Les pesticides qui présentent un risque élevé de contamination des eaux souterraines et qui devraient être prioritaires pour un suivi analytique sont : le carbofuran, le dimethoate, l'ethoprophos et le methomyl.En conclusion, une meilleure gestion de la fertilisation est nécessaire dans la zone d'AU de Dakar, afin de (1) réduire les pertes gazeuses qui contribuent à l'effet de serre, (2) de ralentir la minéralisation du carbone et de l'azote organiques pour créer un stock de C et Ν dans ces sols, (3) de limiter le lessivage dans la nappe et enfin, 4) d'augmenter l'efficacité d'utilisation de Ν par les plantes. Une optimisation de l'irrigation devrait limiter l'alcalinisation secondaire. Enfin, la mise en place d'une lutte intégrée ou biologique contre les ravageurs est indispensable afin de minimiser les risques pour les eaux souterraines et les mares permanentes.ABSTRACTUrban and periurban agriculture (UA) is an important issue in southern countries, because of its key role in their social and economical development and its environmental concern. The goal of this study was to contribute to a better understanding of pollutant transfer and nutrient cycling at the local scale, in order to implement the necessary improvements to guarantee the sustainability of this practice.An approach based on geochemical processes occurring in the vadose zone from the surface down to the groundwater level was chosen, at the scale of cultivated plots and at the regional scale of Dakar periurban areas, to determine the influence of land use.The assessment of irrigation with untreated domestic wastewater and brackish water on soil quality (chapter 2) showed: (1) that the high alkalinity and calcium contents of brackish water induce CaC03 precipitation in the top layer of the soil and therefore a replacement of Ca by Na on the clay- humic complexes, strongly marked during the dry season. Dissolved organic carbon (DOC) increased significantly in the soil solution and in the underlying groundwater. (2) in spite of the similarly high alkalinity and Ca contents of waste water, there is only little CaC03 precipitation and a low increase of the percentage of exchangeable sodium (ESP) in the soil top layer. The nitrification of the ammonium of wastewater (mean 190 mg/L in Pikine) produces protons, which are not any more buffered by bicarbonates exported out of the soil profile, which leads to a net decline of soil pH. Both soils irrigated with untreated wastewater and brackish water store less of C and Ν than soils irrigated with non saline groundwater.The assessment of the impact of land use on the shallow groundwater (chapter 3) allowed determining representative tracers of the land use. Low Br/CI ratio, high NO3/CI ratio and low δ1βΟ- nitrate indicated the influence of wastewater; high pH and high 515N-nitrates indicated the influence of brackish water together with high amendments of organic fertilizers; high Rb+Cr and Κ indicated the influence of poor sanitation facilities in periurban districts (septic tank leakage). This chapter also pointed out the following facts about the nitrogen dynamics : (1) denitrification is a key-process in the Dakar UA agrosystem in the gleysols irrigated with groundwater. The underlying groundwater is almost nitrate free. (2) in the Gleysols irrigated with waste water, ammonium inhibits denitrification but facilitate ammoniac volatilization. A comparison of nitrogen balance between the UA agrosystem and the periurban districts of Dakar (chapter 4) revealed similar flows per surface unit, namely 2-4 tons Ν / ha / year.The evaluation of pesticides use in the UA agrosystem and the risk assessment for the groundwater (chapter 5) revealed a total flow of pesticides of 60kg / ha / year, totalizing 15 active substances. Only two of these are authorized by the Sahelian Pesticides Committee. The most used pesticides are dicofol (organochlorinated), methamidophos, dimethoate and fenithrotion (organophosphate) as well as methomyl. (carbamate). The most important flows vary between 9 to 7 kg / ha / year. Pesticides with a high risk of groundwater contamination - according to SIRIS and EPRIP 2 indicators - are: carbofuran, dimethoate, ethoprophos and methomyl. These substances should be established as a priority for an analytical follow-up in the different environmental compartments.In conclusion, a better management of the fertilization is necessary in the Dakar UA, (1) to reduce the gaseous losses which contribute to greenhouse emissions (2) to slow down the mineralization of the organic carbon and the nitrogen, in order to enhance the C and Ν stock in these soils, (3) to limit the nitrate leaching in the groundwater and finally, 4) to increase the N-use efficiency of plants. An optimization of the irrigation scheme should limit the secondary sodisation if coupled with an increase the stable organic matter of the soil. An integrated or biologic crop pest strategy is urgently needed to minimize risks with respect to ground and surface water (ponds used for fishing).RESUME LARGE PUBLICL'agriculture mondiale connaît actuellement une crise majeure, affectée par les changements climatiques, la sécurité alimentaire et les dégradations de l'environnement. Elle n'a plus le rôle unique de produire, mais devient un élément essentiel de la protection des ressources naturelles et du paysage. Les politiques agricoles basées sur les marchés mondiaux devront se réorienter vers une agriculture locale basée sur le développement durable.La production alimentaire située dans l'enceinte des villes, nommée agriculture urbaine ou périurbaine (AU ci-après) joue un rôle important dans le contexte actuel d'accroissement de la population et de la pauvreté urbaines. L'AU concerne en effet la majorité des mégapoies du monde, fait vivre plus de 200 millions de personnes dans les pays du Sud, fournit jusqu'à 80% de la demande urbaine en certains produits frais, fait barrière à l'extension urbaine et permet un recyclage de certains déchets urbains. L'AU a pour particularité d'être à cheval entre des politiques rurales et urbaines, d'où un délaissement ce cette activité au secteur informel. Ce qui a développé de nombreuses stratégies à risques, comme à Dakar, où les petits producteurs périurbains irriguent quotidiennement avec des eaux usées domestiques par manque d'accès à une eau de bonne qualité et pour raccourcir les cycles de production. L'extrême précarité foncière des acteurs de l'AU de Dakar les empêchent d'investir à long terme et induit des pratiques inadéquates d'irrigation, d'usage de pesticides et de fertilisation de ces sols sableux.L'objectif de cette recherche était de contribuer à une meilleure connaissance des processus de transfert de polluants et du cycle des nutriments à l'échelle des parcelles cultivées par des eaux usées et des eaux saumâtres, afin de déterminer sous quelles conditions l'AU de Dakar peut être pratiquée et surtout maintenue sans porter atteinte à la santé et à l'environnement. Pour cela, une approche basée sur l'étude des processus géochimiques dans le sol jusqu'à la nappe a été choisie, à l'échelle de la parcelle cultivée et à une échelle un peu plus large de la zone périurbaine de Dakar pour déterminer les influences du type d'occupation du sol.Les résultats principaux de cette étude ont montré que (1) il y a un processus de salinisation anthropique des sols (sodisation) lors d'irrigation avec des eaux de nappe saumâtres, un processus accentué en saison sèche et lors d'années à pluviométrie déficitaire. Bien que les eaux usées soient aussi salines que les eaux de nappe, la salinisation des sols irrigués' par des eaux usées est limitée par l'ammonium présent dans les eaux usées (moy 190mg NH4/L à Pikine) qui produit de l'acidité lors de la transformation en nitrates dans le sol (nitrification). (2) les sols irrigués par des eaux usées (EU) stockent moins de C et Ν que les sois de référence, ce qui montrent bien que l'azote des eaux usées n'est pas disponible pour les plantes, mais est lessivé dans la nappe (100 à 450 mg/L N03 sous irrigation par EU, alors que la limite de OMS est de 50mg/L). (3) l'utilisation des isotopes stables des nitrates et des éléments traces, notamment le bore et le brome, ont permis de distinguer l'influence de l'irrigation par des eaux usées, de l'irrigation par des eaux de nappe et des lixiviats de fosses septiques sur les propriétés de la nappe. (4) Le processus de la dénitrification (atténuation naturelle des concentrations en nitrates de la nappe par biotransformation en azote gazeux) est important dans les zones basses de l'agrosystème périurbain de Dakar, sous irrigation par eaux naturelles (ΝΟ3 < 50mg/L). Tandis que sous habitat sans assainissement adéquat, les nitrates atteignent 300 à 700 mg/L. (5) Le flux total de pesticides dans l'AU est énorme (60kg/ha/an) totalisant 15 pesticides, dont deux seulement sont autorisés. Les pesticides les plus utilisés sont des insecticides organophosphorés et organochlorés classés extrêmement dangereux à dangereux par l'OMS, appliqués à des doses de 2 à 9 kg/ha/an. Les pesticides qui ont montré un risque élevé de contamination des eaux souterraines avec les indicateurs SIRIS et EPRIP2 sont : le carbofuran, le dimethoate, l'ethoprophos et le methomyl.En conclusion, nous recommandons la reconstitution d'un horizon superficiel des sols riche en matière organique stable et structuré par production locale de compost. Cette mesure réduira les pertes gazeuses contribuant à l'effet de serre, augmentera le stock de Ν dans ces sols, alors utilisable par les plantes et permettra de diminuer l'irrigation car la capacité de rétention de l'eau dans le sol sera accru, ce qui limitera le lessivage des nitrates dans la nappe et l'alcalinisation secondaire. Enfin, la mise en place d'une lutte intégrée ou biologique contre les ravageurs est indispensable afin de minimiser les risques pour les eaux souterraines et lesmares permanentes.

Development of a Traffic Control Devices and Pavement Markings Manual for Iowa's Cities and Counties with a Survery of Common Practices, April 2001

Transportation agencies in Iowa are responsible for a significant public investment with the installation and maintenance of traffic control devices and pavement markings. Included in this investment are thousands of signs and other inventory items, equipment, facilities, and staff. The proper application of traffic control devices and pavement markings is critical to public safety on streets and highways, and local governments have a prescribed responsibility under the Code of Iowa to properly manage these assets. This research report addresses current traffic control and pavement marking application, maintenance, and management in Iowa.

Development of a Computer Controlled Underbody Plow: TR412, Final Report, January 2006

Underbody plows can be very useful tools in winter maintenance, especially when compacted snow or hard ice must be removed from the roadway. By the application of significant down-force, and the use of an appropriate cutting edge angle, compacted snow and ice can be removed very effectively by such plows, with much greater efficiency than any other tool under those circumstances. However, the successful operation of an underbody plow requires considerable skill. If too little down pressure is applied to the plow, then it will not cut the ice or compacted snow. However, if too much force is applied, then either the cutting edge may gouge the road surface, causing significant damage often to both the road surface and the plow, or the plow may ride up on the cutting edge so that it is no longer controllable by the operator. Spinning of the truck in such situations is easily accomplished. Further, excessive down force will result in rapid wear of the cutting edge. Given this need for a high level of operator skill, the operation of an underbody plow is a candidate for automation. In order to successfully automate the operation of an underbody plow, a control system must be developed that follows a set of rules that represent appropriate operation of such a plow. These rules have been developed, based upon earlier work in which operational underbody plows were instrumented to determine the loading upon them (both vertical and horizontal) and the angle at which the blade was operating.These rules have been successfully coded into two different computer programs, both using the MatLab® software. In the first program, various load and angle inputs are analyzed to determine when, whether, and how they violate the rules of operation. This program is essentially deterministic in nature. In the second program, the Simulink® package in the MatLab® software system was used to implement these rules using fuzzy logic. Fuzzy logic essentially replaces a fixed and constant rule with one that varies in such a way as to improve operational control. The development of the fuzzy logic in this simulation was achieved simply by using appropriate routines in the computer software, rather than being developed directly. The results of the computer testing and simulation indicate that a fully automated, computer controlled underbody plow is indeed possible. The issue of whether the next steps toward full automation should be taken (and by whom) has also been considered, and the possibility of some sort of joint venture between a Department of Transportation and a vendor has been suggested.

Serving Iowa Youth and Families With a Youth Development Approach, 2003

This report is Iowa’s Three-Year Plan, which serves as the application for federal Juvenile Justice and Delinquency Prevention Act formula grant funding (JJDP Act). The Division of Criminal and Juvenile Justice Planning (CJJP) wrote Iowa’s Three-Year Plan. CJJP is the state agency responsible for administering the JJDP Act in Iowa. Federal officials refer to state administering agencies as the state planning agency (SPA). The Plan was developed and approved by Iowa’s Juvenile Justice Advisory Council. That Council assists with administration of the JJDP Act, and also provides guidance and direction to the SPA, the Governor and the legislature regarding juvenile justice issues in Iowa. Federal officials refer to such state level groups as state advisory groups (SAG’s). The acronyms SPA and SAG are used through this report.

Iowa Aircraft Registration Application Form, 2012

Unless specifically exempted, a certificate of registration is required to operate an aircraft in Iowa (in addition to being registered with the FAA). Aircraft registration laws are defined in Iowa Code Chapter 328. A general summary follows: Iowa residents and businesses must register an aircraft unless it is continuously located and operated beyond the boundaries of the state. Nonresident owners of aircraft providing the intrastate transportation of persons or property for compensation, the furnishing of services for compensation, or intrastate transportation of merchandise in Iowa, must register aircraft with the Iowa DOT prior to conducting those operations. Other visitors are exempt from registering aircraft in Iowa as long as their aircraft are not operated or controlled in the state for more than 30 days a year. Annual registration fees are based on aircraft age, original manufactured list price, and its type of use (personal or business). A one-time six percent use tax on the purchase price of the aircraft is collected at the time of registration. Aircraft registration fees (and aviation fuel taxes) are deposited into a State Aviation Fund to help fund aviation programs in Iowa such as airport development projects, the automated weather observing system (AWOS), runway markings, and windsocks

Maternal and Child Health Services Title V Block Grant State Narrative for Iowa Application for 2013 Annual Report for 2011

Key factors that provide context for the state's Maternal and Child Health (MCH) annual report and state plan are highlighted in this overview. This section briefly outlines Iowa's demographics, population changes, economic indicators and significant public initiatives. Major strategic planning efforts affecting development of program activities are also identified.

Training Development for Pavement Preservation, RB07-011, 2013

This research project strives to help the Iowa Department of Transportation (DOT) fully achieve the full benefits of pavement preservation through training on proper selection, design, and application of pavement preservation treatments. In some cases, there is a lack of training when conducting one of these steps and the objective of applying pavement preservation techniques is compromised. Extensive amounts of literature on pavement preservation exist, but a structured approach on how to train staff in selecting, designing, and applying pavement preservation techniques is lacking. The objective of this project was to develop a training-oriented learning management system to address pavement preservation treatments (chip seals, fog seals, slurry systems, and crack seals and fills) as they are dealt with during the phases of selection, design, and construction. Early in the project, it was critical to identify the staff divisions to be trained and the treatments to be included. Through several meetings with the Iowa DOT, three staff divisions were identified: maintenance staff (in charge of selection), design staff, and construction staff. In addition, the treatments listed above were identified as the focus of the study due to their common use. Through needs analysis questionnaires and meetings, the knowledge gap and training needs of the agency were identified. The training modules developed target the gap from the results of the needs analysis. The concepting (selection) training focuses on providing the tools necessary to help make proper treatment selection. The design training focuses on providing the information necessary on the treatment materials (mostly binders and aggregates) and how to make proper material selection. Finally, the construction training focuses on providing equipment calibration procedures, inspection responsibilities, and images of poor and best practices. The research showed that it is important to train each division staff (maintenance, design, and construction) separately, as each staff division has its own needs and interests. It was also preferred that each treatment was covered on an individual basis. As a result of the research, it is recommended to evaluate the performance of pavement preservation treatments pre- and post-training continuously to compare results and verify the effectiveness of the learning management system.

Development of Performance Properties of Ternary Mixtures: Field Demonstrations and Project Summary, TPF-5(117), 2012

Supplementary cementitious materials (SCM) have become common parts of modern concrete practice. The blending of two or three cementitious materials to optimize durability, strength, or economics provides owners, engineers, materials suppliers, and contractors with substantial advantages over mixtures containing only portland cement. However, these advances in concrete technology and engineering have not always been adequately captured in specifications for concrete. Users need specific guidance to assist them in defining the performance requirements for a concrete application and the selection of optimal proportions of the cementitious materials needed to produce the required durable concrete. The fact that blended cements are currently available in many regions increases options for mixtures and thus can complicate the selection process. Both Portland and blended cements have already been optimized by the manufacturer to provide specific properties (such as setting time, shrinkage, and strength gain). The addition of SCMs (as binary, ternary, or even more complex mixtures) can alter these properties, and therefore has the potential to impact the overall performance and applications of concrete. This report is the final of a series of publications describing a project aimed at addressing effective use of ternary systems. The work was conducted in several stages and individual reports have been published at the end of each stage.

Supporting interdisciplinary case studies: development and implementation of a joint learning environment for students in forensic science and criminal law

Scientific reporting and communication is a challenging topic for which traditional study programs do not offer structured learning activities on a regular basis. This paper reports on the development and implementation of a web application and associated learning activities that intend to raise the awareness of reporting and communication issues among students in forensic science and law. The project covers interdisciplinary case studies based on a library of written reports about forensic examinations. Special features of the web framework, in particular a report annotation tool, support the design of various individual and group learning activities that focus on the development of knowledge and competence in dealing with reporting and communication challenges in the students' future areas of professional activity.

Whole-cell living biosensors--are they ready for environmental application?

Since the development of the first whole-cell living biosensor or bioreporter about 15 years ago, construction and testing of new genetically modified microorganisms for environmental sensing and reporting has proceeded at an ever increasing rate. One and a half decades appear as a reasonable time span for a new technology to reach the maturity needed for application and commercial success. It seems, however, that the research into cellular biosensors is still mostly in a proof-of-principle or demonstration phase and not close to extensive or commercial use outside of academia. In this review, we consider the motivations for bioreporter developments and discuss the suitability of extant bioreporters for the proposed applications to stimulate complementary research and to help researchers to develop realistic objectives. This includes the identification of some popular misconceptions about the qualities and shortcomings of bioreporters.

Development of an Improved Agricultural-Based Deicing Product, TR-581, 2010

Snow and ice removal on public streets is a critical part of the work of departments of transportation in northern U.S. states, including Iowa. Iowa is also a state rich in agricultural resources, some of which undergo industrial processes that generate a number of byproducts, e.g., in converting corn to ethanol or soy to biodiesel. It would be desirable to find those that, with a minimum of additional processing, can be used as a deicing compound, either alone or in combination with products currently in use. The focus of this work is therefore to investigate by-products from agricultural processes that may be suitable for use as deicing applications. This topic has been investigated in the past by others, with many patented products described in the literature. An initial screening was carried out to assess the potential acceptability of selected commercial products, as well as a glycerol developed for this project. Based on the variety of parameters tested, the product combination that shows the greatest promise for future application consists of 80% glycerol with 20% NaCl.

Development of an Economic Dust Palliative for Limestone Surfaced Secondary Roads, HR-297, 1990

This research project was directed at laboratory and field evaluation of sodium montmorillonite clay (bentonite) as a dust palliative for limestone surfaced secondary roads. It had been postulated that the electrically charged surfaces of the clay particles could interact with the charged surfaces of the limestone and act as a bonding agent to agglomerate fine (-#200) particulates and also to band the fine particulates to larger (+#200) limestone particles. Laboratory testing using soda ash dispersed bentonite treatment of limestone fines indicated significant improvement of compressive strength and slaking characteristics. It was recommended that the project proceed to field trials and test roads were constructed in Dallas and Adair counties in Iowa. Soda ash dispersed bentonite solutions can be field mixed and applied with conventional spray distribution equipment. A maximum of 1.5% bentonite(by weight of aggregate)can be applied at one time. Higher applications would have to be staged allowing the excess moisture to evaporate between applications. Construction of higher application treatments can be accomplished by adding dry bentonite to the surfacing material and then by dry road mixing. The soda ash water solution can then be spray applied and the treated surfacing material wet mixed by motor graders to a consistency of 3 to 4 inch slump concrete. Two motor graders working in tandem can provide rapid mixing for both methods of construction. Calcium and magnesium chloride treatments are 2 to 3 times more effective in dust reduction in the short term (3-4 months) but are prone to washboarding and potholing due to maintenance restrictions. Bentonite treatment at the 2-3% level is estimated to provide a 30-40% dust reduction over the long term(18-24 months). Normal maintenance blading operations can be used on bentonite treated areas. Vehicle braking characteristics are not adversely affected up to the 3.0% treatment level. The bentonite appears to be functioning as a banding agent to bind small particulates to larger particles and is acting to agglomerate fine particles of limestone. This bonding capability appears recoverable from environmental effects of winter, and from alternating wet and dry periods. The bentonite appears to be able to interact with new applications of limestone maintenance material and maintains a dust reduction capability. Soda ash dispersed bentonite treatment is approximately 10 times more cost effective per percent dust reduction than conventional chloride treatments with respect to time. However,the disadvantage is that there is not the initial dramatic reduction in dust generation as with the chloride treatment. Although dust is reduced 30-40% after treatment there is still dust being generated and the traveling public or residents may not perceive the reduction.