Advanced Building Energy Data Visualization

Advanced Building Energy Data Visualization is a way to detect performance problems in commercialbuildings. By placing sensors in a building that collects data from example, air temperature and electricalpower, then makes it possible to calculate the data in Data Visualization software. This softwaregenerates visual diagrams so the building manager or building operator can see if for example thepower consumption is to high.A first step (before sensors are installed in a building) to see how the energy consumption is in abuilding can be to use a Benchmarking Tool. There is a number of Benchmarking Tools that is availablefor free on the Internet. Each tool have a bit different approach, but they all show how much energyconsumption there is in a building compared to other similar buildings.In this study a new web design for the benchmarking tool CalARCH has been developed. CalARCHis developed at the Berkeley Lab in Berkeley, California, USA. CalARCH uses data collected only frombuildings in California, and is only for comparing buildings in California with other similar buildingsin the state.Five different versions of the web site were made. Then a web survey was done to determine whichversion would be the best for CalARCH. The results showed that Version 5 and Version 3 was the best.Then a new version was made, based on these two versions. This study was made at the LawrenceBerkeley Laboratory.

Implementation and role of device management Solutions to the end users

This research is based on consumer complaints with respect to recently purchased consumer electronics. This research document will investigate the instances of development and device management as a tool used to aid consumer and manage consumer’s mobile products in order to resolve issues in or before the consumers is aware one exists. The problem at the present time is that mobile devices are becoming very advanced pieces of technology, and not all manufacturers and network providers have kept up the support element of End users. As such, the subject of the research is to investigate how device management could possibly be used as a method to promote research and development of mobile devices, and provide a better experience for the consumer. The wireless world is becoming increasingly complex as revenue opportunities are driven by new and innovative data services. We can no longer expect the customer to have the knowledge or ability to configure their own device. Device Management platforms can address the challenges of device configuration and support through new enabling technologies. Leveraging these technologies will allow a network operator to reduce the cost of subscriber ownership, drive increased ARPU (Average Revenue per User) by removing barriers to adoption, reduce churn by improving the customer experience and increase customer loyalty. DM technologies provide a flexible and powerful management method but are managing the same device features that have historically been configured manually through call centers or by the end user making changes directly on the device. For this reason DM technologies must be treated as part of a wider support solution. The traditional requirement for discovery, fault finding, troubleshooting and diagnosis are still as relevant with DM as they are in the current human support environment yet the current generation of solutions do little to address this problem. In the deployment of an effective Device Management solution the network operator must consider the integration of the DM platform, interfacing with many areas of the business, supported by knowledge of the relationship between devices, applications, solutions and services maintained on an ongoing basis. Complementing the DM solution with published device information, setup guides, training material and web based tools will ensure the quality of the customer experience, ensuring that problems are completely resolved, driving data usage by focusing customer education on the use of the wireless service In this way device management becomes a tool used both internally within the network or device vendor and by the customer themselves, with each user empowered to effectively manage the device without any prior knowledge or experience, confident that changes they apply will be relevant, accurate, stable and compatible. The value offered by an effective DM solution with an expert knowledge service will become a significant differentiator for the network operator in an ever competitive wireless market. This research document is intended to highlight some of the issues the industry faces as device management technologies become more prevalent, and offers some potential solutions to simplify the increasingly complex task of managing devices on the network, where device management can be used as a tool to aid customer relations and manage customer’s mobile products in order to resolve issues before the user is aware one exists. The research is broken down into the following, Customer Relationship Management, Device management, the role of knowledge with the DM, Companies that have successfully implemented device management, and the future of device management and CRM. And it also consists of questionnaires aimed at technical support agents and mobile device users. Interview was carried out with CRM managers within support centre to further the evidence gathered. To conclude, the document is to consider the advantages and disadvantages of device management and attempt to determine the influence it will have over customer support centre, and what methods could be used to implement it.

Analysis of tapping test results in a test battery for advanced PD patients

Objective: To compare results from various tapping tests with diary responses in advanced PD. Background: A home environment test battery for assessing patient state in advanced PD, consisting of diary assessments and motor tests was constructed for a hand computer with touch screen and mobile communication. The diary questions: 1. walking, 2. time in off , on and dyskinetic states, 3. off at worst, 4. dyskinetic at worst, 5. cramps, and 6. satisfied with function, relate to the recent past. Question 7, self-assessment, allows seven steps from -3 ( very off ) to +3 ( very dyskinetic ) and relate to right now. Tapping tests outline: 8. Alternately tapping two fields (un-cued) with right hand 9. Same as 8 but using left hand 10. Tapping an active field (out of two) following a system-generated rhythm (increasing speed) with the dominant hand 11. Tapping an active field (out of four) that randomly changes location when tapped using the dominant hand Methods: 65 patients (currently on Duodopa, or candidates for this treatment) entered diary responses and performed tapping tests four times per day during one to six periods of seven days length. In total there were 224 test periods and 6039 test occasions. Speed for tapping test 10 was discardedand tests 8 and 9 were combined by taking means. Descriptive statistics were used to present the variation of the test variables in relation to self assessment (question 7). Pearson correlation coefficients between speed and accuracy (percent correct) in tapping tests and diary responses were calculated. Results: Mean compliance (percentage completed test occasions per test period) was 83% and the median was 93%. There were large differences in both mean tapping speed and accuracy between the different self-assessed states. Correlations between diary responses and tapping results were small (-0.2 to 0.3, negative values for off-time and dyskinetic-time that had opposite scale directions). Correlations between tapping results were all positive (0.1 to 0.6). Conclusions: The diary responses and tapping results provided different information. The low correlations can partly be explained by the fact that questions related to the past and by random variability, which could be reduced by taking means over test periods. Both tapping speed and accuracy reflect the motor function of the patient to a large extent.

Fine mapping and replication of QTL in outbred chicken advanced intercross lines

Background: Linkage mapping is used to identify genomic regions affecting the expression of complex traits. However, when experimental crosses such as F2 populations or backcrosses are used to map regions containing a Quantitative Trait Locus (QTL), the size of the regions identified remains quite large, i.e. 10 or more Mb. Thus, other experimental strategies are needed to refine the QTL locations. Advanced Intercross Lines (AIL) are produced by repeated intercrossing of F2 animals and successive generations, which decrease linkage disequilibrium in a controlled manner. Although this approach is seen as promising, both to replicate QTL analyses and fine-map QTL, only a few AIL datasets, all originating from inbred founders, have been reported in the literature. Methods: We have produced a nine-generation AIL pedigree (n = 1529) from two outbred chicken lines divergently selected for body weight at eight weeks of age. All animals were weighed at eight weeks of age and genotyped for SNP located in nine genomic regions where significant or suggestive QTL had previously been detected in the F2 population. In parallel, we have developed a novel strategy to analyse the data that uses both genotype and pedigree information of all AIL individuals to replicate the detection of and fine-map QTL affecting juvenile body weight. Results: Five of the nine QTL detected with the original F2 population were confirmed and fine-mapped with the AIL, while for the remaining four, only suggestive evidence of their existence was obtained. All original QTL were confirmed as a single locus, except for one, which split into two linked QTL. Conclusions: Our results indicate that many of the QTL, which are genome-wide significant or suggestive in the analyses of large intercross populations, are true effects that can be replicated and fine-mapped using AIL. Key factors for success are the use of large populations and powerful statistical tools. Moreover, we believe that the statistical methods we have developed to efficiently study outbred AIL populations will increase the number of organisms for which in-depth complex traits can be analyzed.

Validity and responsiveness of at-home touch-screen assessments in advanced Parkinson's disease

The aim of this study was to investigate if a telemetry test battery can be used to measure effects of Parkinson’s disease (PD) treatment intervention and disease progression in patients with fluctuations. Sixty-five patients diagnosed with advanced PD were recruited in an open longitudinal 36-month study; 35 treated with levodopa-carbidopa intestinal gel (LCIG) and 30 were candidates for switching from oral PD treatment to LCIG. They utilized a test battery, consisting of self-assessments of symptoms and fine motor tests (tapping and spiral drawings), four times per day in their homes during week-long test periods. The repeated measurements were summarized into an overall test score (OTS) to represent the global condition of the patient during a test period. Clinical assessments included ratings on Unified PD Rating Scale (UPDRS) and 39-item PD Questionnaire (PDQ-39) scales. In LCIG-naïve patients, mean OTS compared to baseline was significantly improved from the first test period on LCIG treatment until month 24. In LCIG-non-naïve patients, there were no significant changes in mean OTS until month 36. The OTS correlated adequately with total UPDRS (rho = 0.59) and total PDQ-39 (0.59). Responsiveness measured as effect size was 0.696 and 0.536 for OTS and UPDRS respectively. The trends of the test scores were similar to the trends of clinical rating scores but dropout rate was high. Correlations between OTS and clinical rating scales were adequate indicating that the test battery contains important elements of the information of well-established scales. The responsiveness and reproducibility were better for OTS than for total UPDRS.

Nicholas Colon, Jr, Proprietor Tele-FM Television and Advanced Television Techniques graduate, 1954.

This is a photograph showing Nicholas Colon, Jr. a New York Trade School, Advanced Television Techniques graduate with an unnamed worker at his Tele-FM Television company. Original caption reads, "Nicholas Colon, Jr. - Advanced Television Techniques 1954, operates and up-to-date and successful television service shop. He is on the executive board of CETA (Certified Electronic Technicians Association). He prefers to employ graduate technicians of the New York Trade School Advanced Television Techniques course." Black and white photograph with caption glued to reverse.

Uso do network simulator-NS para simulação de sistemas distribuídos em cenários com defeitos

O desenvolvimento de protocolos distribuídos é uma tarefa complexa. Em sistemas tolerantes a falhas, a elaboração de mecanismos para detectar e mascarar defeitos representam grande parte do esforço de desenvolvimento. A técnica de simulação pode auxiliar significativamente nessa tarefa. Entretanto, existe uma carência de ferramentas de simulação para investigação de protocolos distribuídos em cenários com defeitos, particularmente com suporte a experimentos em configurações “típicas” da Internet. O objetivo deste trabalho é investigar o uso do simulador de redes NS (Network Simulator) como ambiente para simulação de sistemas distribuídos, particularmente em cenários sujeitos à ocorrência de defeitos. O NS é um simulador de redes multi-protocolos, que tem código aberto e pode ser estendido. Embora seja uma ferramenta destinada ao estudo de redes de computadores, o ajuste adequado de parâmetros e exploração de características permitiu utilizá-lo para simular defeitos em um sistema distribuído. Para isso, desenvolveu-se dois modelos de sistemas distribuídos que podem ser implementados no NS, dependendo do protocolo de transporte utilizado: um baseado em TCP e o outro baseado em UDP. Também, foram estudadas formas de modelar defeitos através do simulador. Para a simulação de defeito de colapso em um nodo, foi proposta a implementação de um método na classe de cada aplicação na qual se deseja simular defeitos. Para ilustrar como os modelos de sistemas distribuídos e de defeitos propostos podem ser utilizados, foram implementados diversos algoritmos distribuídos em sistemas síncronos e assíncronos. Algoritmos de eleição e o protocolo Primário-Backup são exemplos dessas implementações. A partir desses algoritmos, principalmente do Primário-Backup, no qual a simulação de defeitos foi realizada, foi possível constatar que o NS pode ser uma ferramenta de grande auxílio no desenvolvimento de novas técnicas de Tolerância a Falhas. Portanto, o NS pode ser estendido possibilitando que, com a utilização dos modelos apresentados nesse trabalho, simule-se defeitos em um sistema distribuído.

The creative and advanced technology economy in Brazil: executive summary

This document brings together in a succinct form the available data about the current state of the Creative and Advanced Technology Economy of Brazil, presents some suggestions for public policies which can contribute to the development of technological and creative activities, and also points to issues to be studied and actions to be carried out in the future.

Prevalence of helicobacter pylori infection in advanced gastric carcinoma

There is substantial evidence that infection with Helicobacter pylori plays a role in the development of gastric cancer and that it is rarely found in gastric biopsy of atrophic gastritis and gastric cancer. On advanced gastric tumors, the bacteria can be lost from the stomach. Aims - To analyze the hypothesis that the prevalence of H.pylori in operated advanced gastric carcinomas and adjacent non-tumor tissues is high, comparing intestinal and diffuse tumors according to Lauren’s classifi cation. Methods - A prospective controlled study enrolled 56 patients from “Hospital Universitário”, Federal University of Rio Grande do Norte, Natal, RN, Brazil, with advanced gastric cancer, treated from February 2000 to March 2003. Immediately after partial gastrectomy, the resected stomach was opened and several mucosal biopsy samples were taken from the gastric tumor and from the adjacent mucosa within 4 cm distance from the tumor margin. Tissue sections were stained with hematoxylin and eosin. Lauren‘s classifi cation for gastric cancer was used, to analyse the prevalence of H. pylori in intestinal or diffuse carcinomas assessed by the urease rapid test, IgG by ELISA and Giemsa staining. H. pylori infected patients were treated with omeprazole, clarithromycin and amoxicillin for 7 days. Follow-up endoscopy and serology were performed 6 months after treatment to determine successful eradication of H. pylori in non-tumor tissue. Thereafter, follow-up endoscopies were scheduled annually. Chi-square and MacNemar tests with 0.05 signifi cance were used. Results - Thirty-four tumors (60.7%) were intestinal-type and 22 (39.3%) diffuse type carcinomas. In adjacent non-tumor gastric mucosa, chronic gastritis were found in 53 cases (94.6%) and atrophic mucosa in 36 patients (64.3%). All the patients with atrophic mucosa were H. pylori positive. When examined by Giemsa and urease test, H. pylori positive rate in tumor tissue of intestinal type carcinomas was higher than that in diffuse carcinomas. In tumor tissues, 34 (60.7%) H. pylori-positive in gastric carcinomas were detected by Giemsa method. H. pylori was observed in 30 of 56 cases (53.5%) in tissues 4 cm adjacent to tumors. This difference was not signifi cant. Eradication of H. pylori in non-tumor tissue of gastric remnant led to a complete negativity on the 12th postoperative month. Conclusions - The data confi rmed the hypothesis of a high prevalence of H. pylori in tumor tissue of gastric advanced carcinomas and in adjacent non-tumor mucosa of operated stomachs. The presence of H. pylori was predominant in the intestinal-type carcinoma

Influência das tensões tectônicas na permeabilidade da formação Açu - Bacia Potiguar

The behavior of the fluid flux in oil fields is influenced by different factors and it has a big impact on the recovery of hydrocarbons. There is a need of evaluating and adapting the actual technology to the worldwide reservoirs reality, not only on the exploration (reservoir discovers) but also on the development of those that were already discovered, however not yet produced. The in situ combustion (ISC) is a suitable technique for these recovery of hydrocarbons, although it remains complex to be implemented. The main objective of this research was to study the application of the ISC as an advanced oil recovery technique through a parametric analysis of the process using vertical wells within a semi synthetic reservoir that had the characteristics from the brazilian northwest, in order to determine which of those parameters could influence the process, verifying the technical and economical viability of the method on the oil industry. For that analysis, a commercial reservoir simulation program for thermal processes was used, called steam thermal and advanced processes reservoir simulator (STARS) from the computer modeling group (CMG). This study aims, through the numerical analysis, find results that help improve mainly the interpretation and comprehension of the main problems related to the ISC method, which are not yet dominated. From the results obtained, it was proved that the mediation promoted by the thermal process ISC over the oil recovery is very important, with rates and cumulated production positively influenced by the method application. It was seen that the application of the method improves the oil mobility as a function of the heating when the combustion front forms inside the reservoir. Among all the analyzed parameters, the activation energy presented the bigger influence, it means, the lower the activation energy the bigger the fraction of recovered oil, as a function of the chemical reactions speed rise. It was also verified that the higher the enthalpy of the reaction, the bigger the fraction of recovered oil, due to a bigger amount of released energy inside the system, helping the ISC. The reservoir parameters: porosity and permeability showed to have lower influence on the ISC. Among the operational parameters that were analyzed, the injection rate was the one that showed a stronger influence on the ISC method, because, the higher the value of the injection rate, the higher was the result obtained, mainly due to maintaining the combustion front. In connection with the oxygen concentration, an increase of the percentage of this parameter translates into a higher fraction of recovered oil, because the quantity of fuel, helping the advance and the maintenance of the combustion front for a longer period of time. About the economic analysis, the ISC method showed to be economically feasible when evaluated through the net present value (NPV), considering the injection rates: the higher the injection rate, the higher the financial incomes of the final project