Effects of rotating inlet distortion on multistage compressor stability

In multi-spool engines, rotating stall in an upstream compressor will impose a rotating distortion on the downstream compressor, thereby affecting its stability margin. In this paper experiments are described in which this effect was simulated by a rotating screen upstream of several multistage low-speed compressors. The measurements are complemented by, and compared with, a theoretical model of multistage compressor response to speed and direction of rotation of an inlet distortion. For co-rotating distortions (i.e., distortions rotating in the same direction as rotor rotation), experiments show that the compressors exhibited significant loss in stability margin and that they could be divided into two groups according to their response. The first group exhibited a single peak in stall margin degradation when the distortion speed corresponded to roughly 50% of rotor speed. The second group showed two peaks in stall margin degradation corresponding to distortion speeds of approximately 25-35% and 70-75% of rotor speed. These new results demonstrate that multistage compressors can have more than a single resonant response. Detailed measurements suggest that the two types of behavior are linked to differences between the stall inception processes observed for the two groups of compressors and that a direct connection thus exists between the observed forced response and the unsteady flow phenomena at stall onset. For counter-rotational distortions, all the compressors tested showed minimal loss of stability margin. The results imply that counter-rotation of the fan and core compressor, or LP and HP compressors, could be a worthwhile design choice. Calculations based on the two-dimensional theoretical model show excellent agreement for the compressors which had a single peak for stall margin degradation. We take this first-of-a-kind comparison as showing that the model, though simplified, captures the essential fluid dynamic features of the phenomena. Agreement is not good for compressors which had two peaks in the curve of stall margin shift versus distortion rotation speed. The discrepancy is attributed to the three-dimensional and short length scale nature of the stall inception process in these machines; this includes phenomena that have not yet been addressed in any model.

Influence of the state of the inlet endwall boundary layer on the interaction between pressure surface separation and endwall flows

This paper describes the effect of the state of the inlet boundary layer (laminar or turbulent) on the structure of the endwall flow on two different profiles of low-pressure (LP) turbine blades (solid thin and hollow thick). At present the state of the endwall boundary layer at the inlet of a real LP turbine is not known. The intention of this paper is to show that, for different designs of LP turbine, the state of the inlet boundary layer affects the performance of the blade in very different ways. The testing was completed at low speed in a linear cascade using area traversing, flow visualization and static pressure measurements. The paper shows that, for a laminar inlet boundary layer, the two profiles have a similar loss distribution and structure of endwall flow. However, for a turbulent inlet boundary layer the two profiles are shown to differ significantly in both the total loss and endwall flow structure. The pressure side separation bubble on the solid thin profile is shown to interact with the passage vortex, causing a higher endwall loss than that measured on the hollow thick profile.

Axial compressor response to inlet flow distortions by a CFD analysis

The usual approach to compressor design considers uniform inlet flow characteristics. Especially in aircraft applications, the inlet flow is quite often non uniform, and this can result in severe performance degradation. The magnitude of this phenomenon is amplified in military engines due to the complexity of inlet duct configurations and the extreme flight conditions. CFD simulation is an innovative and powerful tool for studying inlet distortions and can bring this inside the very early phases of the design process. This project attempts to study the effects of inlet flow distortions in an axial flow compressor trying to minimize the use computer resources and computational time. The first stage of a low bypass ratio compressor has been analyzed and its clean and distorted performance compared outlining the principal changes due to uneven flow distribution: drop in mass flow, increase in pressure and temperature ratios, decrease in surge margin. Three different studies have then been conducted to better understand the effects of the level, the type and the frequency of the distortion.

CALCULATIONS OF INLET DISTORTION INDUCED COMPRESSOR FLOWFIELD INSTABILITY.

Calculations are presented predicting the onset of flow instability for a multistage low speed axial compressor operating in circumferentially distorted inlet flow. The most important feature of the model used is that it attempts to properly account for the fluid dynamic interaction between the spoiled and unspoiled sectors of the compressor. The calculations show that there is an approximate stability criterion, the annulus averaged slope of the compressor pressure rise characteristic equal to zero, that is valid whenever the dynamics of the compressor distorted flowfield can be considered independent of the compressor environment. This approximate criterion is used to investigate the relationship between the present model and the 'parallel compressor' model. Further calculations are performed to investigate cases of interest when the dynamics of the compressor flowfield are coupled to the environment. Resonant cases and cases when the distortion is unsteady are studied.

Ichthyofaunal diversity of great Nicobar Island, Bay of Bengal

Ichthyofauna was studied in the inshore waters around the Great Nicobar Island to assess the extent of biodiversity of fishery resources in the Great Nicobar waters by using various gears and crafts. During the present study, 258 species of fin fishes belonging to 141 genera, 84 families and 19 orders were recorded. Among these, Perciformes topped the list with 47 families, 84 genera and 169 species followed by Clupeiformes, Angulliformes, Tetrodoniformes, Cyprinodontiformes, Scorpaeniformes, Rajiformes, Elopiformes, Pleuronectiformes, Syluriformes, Laminiformes, Bercyformes, Aelopiformes, Syngathiformes and Gonorhychiformes which includes the medicinally important and ornamentally valuable species.

CpG island density and its correlations with genomic features in mammalian genomes

Background: CpG islands, which are clusters of CpG dinucleotides in GC-rich regions, are considered gene markers and represent an important feature of mammalian genomes. Previous studies of CpG islands have largely been on specific loci or within one geno

Effects of salinity and temperature on the larval development of a sesarmid crab Neosarmatium trispinosum Davie (Crustacea: Brachyura: Sesarmidae) from mangrove swamp in Okinawa Island, Japan

The larval development of the semiterrestrial sesarmid mangrove crab Neosarmarium trispinosum was studied under laboratory conditions at salinities 0-35%o and constant temperatures of 20-30°C. The larval development consists of five zoeal stages and a megalopa. Larvae survived to the first crab stage at salinities between 15 and 35%o with different percentages. At 0, 5 and 10%o, the larvae died within 12-18 hours without moulting to subsequent stages. The highest survival rate was recorded at 20-25%o and 25-30°C with shortest development duration to the first crab stage ranging from 24-28 days. At the highest salinity (35%o), survival rate was gradually decreased with increasing development duration. There were significant differences (P

Food of two size-groups of the catfish Mystus giulio (Hamilton-Buchanan) in Vemblai canal, Vypeen Island

The stomach contents of two length-groups of the catfish Mystus gulio collected from Vemblai Canal in Vypeen Island (Kochi) were examined by frequency of occurrence and points methods. Analyses using standard indices proved difference in diet composition between the two size-groups.

Commercial studies on radiation preservation of fish and shell-fish in Canada

The author describes work being undertaken at the Fisheries Research Board of Canada's Laboratory at Halifax (Nova Scotia). These studies relate particularly to the irradiation of fish and shellfish for storage, and bacterial analysis of irradiated products.

Effect of sulphide on Admiralty brass in seawater

The corrosion behaviour of Admiralty brass in putrified seawater has been studied. It was observed that when the dissolved oxygen in the putrified seawater medium has attained very low value (<0.53 p.p.m) the corrosion rate of admiralty brass showed decreasing trend in spite of increased level of sulphide from 21.2 to 228 p.p.m. Significant correlations (negative) were observed between corrosion rates and log period of exposure.

Milkfish fry occurrence pattern in two localities along the Western Coast of Panay Island

The results are presented of a study of milkfish fry occurrence in the Philippines, namely at Magaba and at Tubog. There were 2 peaks of fry occurrence in the latter, one in May and another in October, whereas only one peak occurred in the former in May. The possible influence on light intensity on the fry seasons is examined.

Occurrence of milkfish, Chanos chanos (Forsskal) eggs around Panay Island, Philippines

The study documents the occurrence of milkfish, Chanos chanos (Forsskal) eggs around Panay Island, Philippines: in Cuyo East Pass, Panay Gulf, Visayan Sea, Sibuyan Sea and Cagayan Islands. Most of the eggs, 545 out of 551, were obtained from Cuyo East Pass compared to Cagayan Islands and Sibuyan Sea while no milkfish egg was recovered from either Panay Gulf or Visayan Sea.

Status of the biodiversity of St. Martin's Island, Bay of Bengal, Bangladesh

A total of 234 species of fish have been recorded from the St Martin Island. Of which, 98 species are coral associated. The total number of recorded mollusc and crab species stands at 187 and 7 species respectively. A total of 66 coral species were recorded, of which 19 are fossil corals, 36 living corals and the rest are under 6 families of subclass Octocorallia (soft corals). A total of 14 species of algae have been recorded from the St. Martin's Island. There is an estimated amount of 1500 MT red sea weed biomass available around the St. Martin's Island. The island contains some of the most unique, benthic community associations in Bangladesh, not found anywhere else in the South Asian region. The unique marine communities have very high scientific value for research and monitoring and there are only a few examples worldwide, where coral-algal communities dominate rocky reefs. The economy of the island is based on fishing. It is estimated that, about 1650 MT of fish are caught annually. Over-exploitation of renewable marine and coastal resources (e.g., rocky reef fisheries, coral and shell extraction; removal of coastal vegetation from inter-tidal and sub-tidal habitats) is a major threat to this ecosystem. Destructive fishing practices, mainly the use of rock-weighted gill nets over the inshore boulder reefs is of prime aggravates. Proper implementation of the rules and regulation for Ecologically Critical Areas (ECA's), alternative livelihood for the local people and further research should be immediately taken for sustainable utilization and to save the rich biodiversity of the only coral island in Bangladesh.