Bones collection of Lena Delta reserve Tiksi, Appendix 4-6

Remains of large Pleistocene mammals always attract attention. Scientists and local people who work and live in the Laptev Sea Region find and collect various bones and fragments of large mammals. Some of them are brought to the Lena Delta Reserve. Mammal remains of the "Mammoth fauna" are the most common artifacts in the paleontological collection of the Lena Delta Reserve museum. The collection includes single bones, fragments of skeletons, bones with soft tissues and hair of Late Pleistocene and Holocene specimens. It consists of nearly 300 samples. The museum was created thanks to the enthusiasm of Dr. A. Gukov, the present director of the reserve. Employees of the reserve, school teachers, pupils and other interested people also contribute. The first specimens were collected in 1985. They were bison bones collected by Yarlykov Yu. A. on Makar Island (Yana Delta Region) near the Makar polar station; Efimov S. N. found horse and reindeer bones on the Myostakh Cape, Bykovsky Peninsula (Lena Delta Region). Mammoth and reindeer bones were collected by Gukov A. Yu. during the same year on Kurungnakh-Sise Island. Over more than 20 years many people have presented their finds to the reserve. These are samples from different islands of the Lena Delta Region, from the New Siberian Islands, from the Yana Delta Region, and from the southern coasts of the Laptev and East Siberian Seas. Most of the collection consists of bones from the Bykovsky Peninsula (about 100 samples) as well as from the islands of the Lena Delta Region. Unfortunately not all samples have exact information about their origins or is geological information available for all finds. It is typical for this exhibition that the finds were collected by amateurs (not during geological or paleontological expeditions). A considerable portion of the collection consists of finds of Dr. A. Gukov from different locations within the Lena Delta Reserve. In 2001 Dr. A. Sher delivered about 40 samples from the Bykovsky Peninsula (Mamontovy Khayata) to the museum.

(Table T2) Stable carbon and oxygen isotopes of DSDP Leg 30, Leg 33, ODP Leg 130 and Leg 192 sites, Ontong Java Plateau

Stable isotopic analyses of bulk carbonates recovered from Ontong Java Plateau during Ocean Drilling Program (ODP) Leg 192 (Holes 1183A and 1186A) show an ~0.5 per mil increase in d18O values from the upper Campanian/lower Maastrichtian to the upper Maastrichtian. This shift is consistent with widespread evidence for cooling at this time. Similar shifts were found at other localities on Ontong Java Plateau (Deep Sea Drilling Project [DSDP] Sites 288 and 289 and ODP Site 807) and at DSDP Site 317 on Manihiki Plateau. These data extend evidence for Maastrichtian cooling into the southwestern tropical and subtropical Pacific. The record of apparent cooling survives despite a significant diagenetic overprint at all sites. Comparing average Maastrichtian d18O values among sites suggests that diagenesis caused d18O to first be shifted toward higher values and then back toward lower values as burial depth increased. Carbon isotopes at the six sites show no apparent primary shifts, but at four sites, the Cretaceous/Tertiary boundary interval coincides with a negative excursion attributed to alteration of sediments near the boundary.

A Model-based Repository for Open Source Service and Component Integration.

Open source is a software development paradigm that has seen a huge rise in recent years. It reduces IT costs and time to market, while increasing security and reliability. However, the difficulty in integrating developments from different communities and stakeholders prevents this model from reaching its full potential. This is mainly due to the challenge of determining and locating the correct dependencies for a given software artifact. To solve this problem we propose the development of an extensible software component repository based upon models. This repository should be capable of solving the dependencies between several components and work with already existing repositories to access the needed artifacts transparently. This repository will also be easily expandable, enabling the creation of modules that support new kinds of dependencies or other existing repository technologies. The proposed solution will work with OSGi components and use OSGi itself.

Spiral optical designs for nonimaging applications

Manufacturing technologies as injection molding or embossing specify their production limits for minimum radii of the vertices or draft angle for demolding, for instance. In some demanding nonimaging applications, these restrictions may limit the system optical efficiency or affect the generation of undesired artifacts on the illumination pattern. A novel manufacturing concept is presented here, in which the optical surfaces are not obtained from the usual revolution symmetry with respect to a central axis (z axis), but they are calculated as free-form surfaces describing a spiral trajectory around z axis. The main advantage of this new concept lies in the manufacturing process: a molded piece can be easily separated from its mold just by applying a combination of rotational movement around axis z and linear movement along axis z, even for negative draft angles. Some of these spiral symmetry examples will be shown here, as well as their simulated results.

Novel free-form optical surface design with spiral symmetry

Manufacturing technologies as injection molding or embossing specify their production limits for minimum radii of the vertices or draft angle for demolding, for instance. These restrictions may limit the system optical efficiency or affect the generation of undesired artifacts on the illumination pattern when dealing with optical design. A novel manufacturing concept is presented here, in which the optical surfaces are not obtained from the usual revolution symmetry with respect to a central axis (z axis), but they are calculated as free-form surfaces describing a spiral trajectory around z axis. The main advantage of this new concept lies in the manufacturing process: a molded piece can be easily separated from its mold just by applying a combination of rotational movement around axis z and linear movement along axis z, even for negative draft angles. The general designing procedure will be described in detail

Spiral nonimaging optical designs

Manufacturing technologies as injection molding or embossing specify their production limits for minimum radii of the vertices or draft angle for demolding, for instance. In some demanding nonimaging applications, these restrictions may limit the system optical efficiency or affect the generation of undesired artifacts on the illumination pattern. A novel manufacturing concept is presented here, in which the optical surfaces are not obtained from the usual revolution symmetry with respect to a central axis (z axis), but they are calculated as free-form surfaces describing a spiral trajectory around z axis. The main advantage of this new concept lies in the manufacturing process: a molded piece can be easily separated from its mold just by applying a combination of rotational movement around axis z and linear movement along axis z, even for negative draft angles. Some of these spiral symmetry examples will be shown here, as well as their simulated results.

Quantitative evaluation of artifact removal in real magnetoencephalogram signals with blind source separation

The magnetoencephalogram (MEG) is contaminated with undesired signals, which are called artifacts. Some of the most important ones are the cardiac and the ocular artifacts (CA and OA, respectively), and the power line noise (PLN). Blind source separation (BSS) has been used to reduce the influence of the artifacts in the data. There is a plethora of BSS-based artifact removal approaches, but few comparative analyses. In this study, MEG background activity from 26 subjects was processed with five widespread BSS (AMUSE, SOBI, JADE, extended Infomax, and FastICA) and one constrained BSS (cBSS) techniques. Then, the ability of several combinations of BSS algorithm, epoch length, and artifact detection metric to automatically reduce the CA, OA, and PLN were quantified with objective criteria. The results pinpointed to cBSS as a very suitable approach to remove the CA. Additionally, a combination of AMUSE or SOBI and artifact detection metrics based on entropy or power criteria decreased the OA. Finally, the PLN was reduced by means of a spectral metric. These findings confirm the utility of BSS to help in the artifact removal for MEG background activity.

Técnica de Inversión Temporal para la Mejora del Enfocado de Imágenes SAR en Entornos Urbanos

Conventional SAR (Synthetic Aperture Radar) techniques only consider a single reflection of transmitted waveforms from targets. Nevertheless, today?s new applications force SAR systems to work in much more complex scenes such as urban environments. As a result, multiple-bounce returns are additionally superposed to direct echoes. We refer to these as ghost images, since they obscure true target image and lead to poor resolution. By applying Time Reversal concept to SAR imaging (TR-SAR), it is possible to reduce considerably ?or almost mitigate? ghosting artifacts, recovering the lost resolution due to multipath effects. Furthermore, some focusing indicators such as entropy (E), contrast (C) and Rényi entropy (RE) provide us a good focusing criterion when using TR-SAR.

Reduced order modeling of some fluid flows of industrial interest

Some basic ideas are presented for the construction of robust, computationally efficient reduced order models amenable to be used in industrial environments, combined with somewhat rough computational fluid dynamics solvers. These ideas result from a critical review of the basic principles of proper orthogonal decomposition-based reduced order modeling of both steady and unsteady fluid flows. In particular, the extent to which some artifacts of the computational fluid dynamics solvers can be ignored is addressed, which opens up the possibility of obtaining quite flexible reduced order models. The methods are illustrated with the steady aerodynamic flow around a horizontal tail plane of a commercial aircraft in transonic conditions, and the unsteady lid-driven cavity problem. In both cases, the approximations are fairly good, thus reducing the computational cost by a significant factor.

Inhomogeneous source uniformization using a shell mixer Köhler integrator

High flux and high CRI may be achieved by combining different chips and/or phosphors. This, however, results in inhomogeneous sources that, when combined with collimating optics, typically produce patterns with undesired artifacts. These may be a combination of spatial, angular or color non-uniformities. In order to avoid these effects, there is a need to mix the light source, both spatially and angularly. Diffusers can achieve this effect, but they also increase the etendue (and reduce the brightness) of the resulting source, leading to optical systems of increased size and wider emission angles. The shell mixer is an optic comprised of many lenses on a shell covering the source. These lenses perform Kohler integration to mix the emitted light, both spatially and angularly. Placing it on top of a multi-chip Lambertian light source, the result is a highly homogeneous virtual source (i.e, spatially and angularly mixed), also Lambertian, which is located in the same position with essentially the same size (so the average brightness is not increased). This virtual light source can then be collimated using another optic, resulting in a homogeneous pattern without color separation. Experimental measurements have shown optical efficiency of the shell of 94%, and highly homogeneous angular intensity distribution of collimated beams, in good agreement with the ray-tracing simulations.

Spatio-temporal filtering with morphological operators for robust cell migration estimation in "in-vivo" images

The understanding of the embryogenesis in living systems requires reliable quantitative analysis of the cell migration throughout all the stages of development. This is a major challenge of the "in-toto" reconstruction based on different modalities of "in-vivo" imaging techniques -spatio-temporal resolution and image artifacts and noise. Several methods for cell tracking are available, but expensive manual interaction -time and human resources- is always required to enforce coherence. Because of this limitation it is necessary to restrict the experiments or assume an uncontrolled error rate. Is it possible to obtain automated reliable measurements of migration? can we provide a seed for biologists to complete cell lineages efficiently? We propose a filtering technique that considers trajectories as spatio-temporal connected structures that prunes out those that might introduce noise and false positives by using multi-dimensional morphological operators.

Agile user stories enriched with usability

Usability is a critical quality factor. Therefore, like traditional software teams, agile teams have to address usability to properly catch their users experience. There exists an interesting debate in the agile and usability communities about how to achieve this integration. Our aim is to contribute to this debate by discussing the incorporation of particular usability recommendations into user stories, one of the most popular artifacts for communicating agile requirements. In this paper, we explore the implications of usability for both the structure of and the process for defining user stories. We discuss what changes the incorporation of particular usability issues may introduce in a user story. Although our findings require more empirical validation, we think that they are a good starting point for further research on this line.

The NeOn Ontology Models

Interoperability on multiple levels, concerning both the ontologies themselves and their engineering activities, is a key requirement for ontology networks to be efficient, with minimal redundancy and high reuse. This requirement has a strict binding for software tools that can support some interoperability levels, yet they can be hindered by a lack of shared models and vocabularies describing the resources to be handled, as well as the ways of handling them. Here, three examples of metalevel vocabularies are proposed, each covering at least one peculiar interoperability aspect: OMV for modeling the artifacts themselves, LIR for managing a multilingual layer on top of them, and C-ODO Light for modeling collaboration-supportive life cycle management tasks and processes. All of these models lend themselves to handling by dedicated software tools and are all being employed within NeOn products.