5.9-keV Mn K-shell X-ray luminosity from the decay of 55Fe in Type Ia supernova models

We show that the X-ray line flux of the Mn Kα line at 5.9 keV from the decay of 55Fe is a promising diagnostic to distinguish between Type Ia supernova (SN Ia) explosion models. Using radiation transport calculations, we compute the line flux for two three-dimensional explosion models: a near-Chandrasekhar mass delayed detonation and a violent merger of two (1.1 and 0.9 M⊙) white dwarfs. Both models are based on solar metallicity zero-age main-sequence progenitors. Due to explosive nuclear burning at higher density, the delayed-detonation model synthesizes ˜3.5 times more radioactive 55Fe than the merger model. As a result, we find that the peak Mn Kα line flux of the delayed-detonation model exceeds that of the merger model by a factor of ˜4.5. Since in both models the 5.9-keV X-ray flux peaks five to six years after the explosion, a single measurement of the X-ray line emission at this time can place a constraint on the explosion physics that is complementary to those derived from earlier phase optical spectra or light curves. We perform detector simulations of current and future X-ray telescopes to investigate the possibilities of detecting the X-ray line at 5.9 keV. Of the currently existing telescopes, XMM-Newton/pn is the best instrument for close (≲1-2 Mpc), non-background limited SNe Ia because of its large effective area. Due to its low instrumental background, Chandra/ACIS is currently the best choice for SNe Ia at distances above ˜2 Mpc. For the delayed-detonation scenario, a line detection is feasible with Chandra up to ˜3 Mpc for an exposure time of 106 s. We find that it should be possible with currently existing X-ray instruments (with exposure times ≲5 × 105 s) to detect both of our models at sufficiently high S/N to distinguish between them for hypothetical events within the Local Group. The prospects for detection will be better with future missions. For example, the proposed Athena/X-IFU instrument could detect our delayed-detonation model out to a distance of ˜5 Mpc. This would make it possible to study future events occurring during its operational life at distances comparable to those of the recent supernovae SN 2011fe (˜6.4 Mpc) and SN 2014J (˜3.5 Mpc).

The dust environment of comet 67P/Churyumov-Gerasimenko from Rosetta OSIRIS and VLT observations in the 4.5 to 2.9 au heliocentric distance range inbound

Context. The ESA Rosetta spacecraft, currently orbiting around comet 67P/Churyumov-Gerasimenko, has already provided in situ measurements of the dust grain properties from several instruments,particularly OSIRIS and GIADA. We propose adding value to those measurements by combining them with ground-based observations of the dust tail to monitor the overall, time-dependent dust-production rate and size distribution.
Aims. To constrain the dust grain properties, we take Rosetta OSIRIS and GIADA results into account, and combine OSIRIS data during the approach phase (from late April to early June 2014) with a large data set of ground-based images that were acquired with the ESO Very Large Telescope (VLT) from February to November 2014.
Methods. A Monte Carlo dust tail code, which has already been used to characterise the dust environments of several comets and active asteroids, has been applied to retrieve the dust parameters. Key properties of the grains (density, velocity, and size distribution) were obtained from Rosetta observations: these parameters were used as input of the code to considerably reduce the number of free parameters. In this way, the overall dust mass-loss rate and its dependence on the heliocentric distance could be obtained accurately.
Results. The dust parameters derived from the inner coma measurements by OSIRIS and GIADA and from distant imaging using VLT data are consistent, except for the power index of the size-distribution function, which is α = −3, instead of α = −2, for grains smaller than 1 mm. This is possibly linked to the presence of fluffy aggregates in the coma. The onset of cometary activity occurs at approximately 4.3 AU, with a dust production rate of 0.5 kg/s, increasing up to 15 kg/s at 2.9 AU. This implies a dust-to-gas mass ratio varying between 3.8 and 6.5 for the best-fit model when combined with water-production rates from the MIRO experiment.

Metabolically-inactive glucagon-like peptide-1(9-36)amide confers selective protective actions against post-myocardial infarction remodelling

BACKGROUND: Glucagon-like peptide-1 (GLP-1) therapies are routinely used for glycaemic control in diabetes and their emerging cardiovascular actions have been a major recent research focus. In addition to GLP-1 receptor activation, the metabolically-inactive breakdown product, GLP-1(9-36)amide, also appears to exert notable cardiovascular effects, including protection against acute cardiac ischaemia. Here, we specifically studied the influence of GLP-1(9-36)amide on chronic post-myocardial infarction (MI) remodelling, which is a major driver of heart failure progression.

METHODS: Adult female C57BL/6 J mice were subjected to permanent coronary artery ligation or sham surgery prior to continuous infusion with GLP-1(9-36)amide or vehicle control for 4 weeks.

RESULTS: Infarct size was similar between groups with no effect of GLP-1(9-36)amide on MI-induced cardiac hypertrophy, although modest reduction of in vitro phenylephrine-induced H9c2 cardiomyoblast hypertrophy was observed. Whilst echocardiographic systolic dysfunction post-MI remained unchanged, diastolic dysfunction (decreased mitral valve E/A ratio, increased E wave deceleration rate) was improved by GLP-1(9-36)amide treatment. This was associated with modulation of genes related to extracellular matrix turnover (MMP-2, MMP-9, TIMP-2), although interstitial fibrosis and pro-fibrotic gene expression were unaltered by GLP-1(9-36)amide. Cardiac macrophage infiltration was also reduced by GLP-1(9-36)amide together with pro-inflammatory cytokine expression (IL-1β, IL-6, MCP-1), whilst in vitro studies using RAW264.7 macrophages revealed global potentiation of basal pro-inflammatory and tissue protective cytokines (e.g. IL-1β, TNF-α, IL-10, Fizz1) in the presence of GLP-1(9-36)amide versus exendin-4.

CONCLUSIONS: These data suggest that GLP-1(9-36)amide confers selective protection against post-MI remodelling via preferential preservation of diastolic function, most likely due to modulation of infiltrating macrophages, indicating that this often overlooked GLP-1 breakdown product may exert significant actions in this setting which should be considered in the context of GLP-1 therapy in patients with cardiovascular disease.

Psychological determinants of consumer acceptance of personalised nutrition in 9 European countries

OBJECTIVE: To develop a model of the psychological factors which predict people's intention to adopt personalised nutrition. Potential determinants of adoption included perceived risk and benefit, perceived self-efficacy, internal locus of control and health commitment.

METHODS: A questionnaire, developed from exploratory study data and the existing theoretical literature, and including validated psychological scales was administered to N=9381 participants from 9 European countries (Germany, Greece, Ireland, Poland, Portugal, Spain, the Netherlands, the UK, and Norway).

RESULTS: Structural equation modelling indicated that the greater participants' perceived benefits to be associated with personalised nutrition, the more positive their attitudes were towards personalised nutrition, and the greater their intention to adopt it. Higher levels of nutrition self-efficacy were related to more positive attitudes towards, and a greater expressed intention to adopt, personalised nutrition. Other constructs positively impacting attitudes towards personalised nutrition included more positive perceptions of the efficacy of regulatory control to protect consumers (e.g. in relation to personal data protection), higher self-reported internal health locus of control, and health commitment. Although higher perceived risk had a negative relationship with attitude and an inverse relationship with perceived benefit, its effects on attitude and intention to adopt personalised nutrition was less influential than perceived benefit. The model was stable across the different European countries, suggesting that psychological factors determining adoption of personalised nutrition have generic applicability across different European countries.

CONCLUSION: The results suggest that transparent provision of information about potential benefits, and protection of consumers' personal data is important for adoption, delivery of public health benefits, and commercialisation of personalised nutrition.

Compreensão e interpretação em matemática: dificuldades de alunos do 9º ano na resolução de problemas

Dissertação mest., Matemática, Universidade do Algarve, 2009

Chemical ecology of arthropods. 9. Structure and absolute configuration of hippodamine and convergine, two novel alkaloids from american ladybug hippodamia convergens (coleoptera- coccinellidae)

In a previous communication (2) the isolation of two defensive alkaloid, hippodamine and convergine, from the American ladybug Hippodamia convergens was reported. A preliminary chemical study (2) led to the hypothesis that hippodamine could be represented by (1), with unknown stereochemistry at carbon atom 2. Convergine was supposed to be a 3a or 6a hydroxyhippodamine.

Compte rendu: Johann Wolfgang Unger (2013), The Discursive Construction of the Scots Language : Education, Politics and Everyday Life, Amsterdam, John Benjamins, coll. « Discourse Approaches to Politics, Society and Culture, 51 », 178 p. [ISBN : 978-9-027-20642-8]

Résumé non disponible

Compte rendu: Romain Colonna (dir.), (2015), Des paroles, des langues et des pouvoirs, Paris, L’Harmattan, coll. « Espaces discursifs », 252 p. [ISBN : 978-2-343-04951-9]

Résumé non disponible

Reseña: Elvira Narvaja de Arnoux y Susana Nothstein (eds.) (2014), Temas de glotopolítica: integración regional sudamericana y panhispanismo, Buenos Aires, Biblos, coll. “Investigaciones y ensayos”, 376 p. [ISBN: 978-9-876-91257-0]

Résumé non disponible

Die Kosten der Modellabteilung „Weichkäserei“. Teil 3: Ergebnisse und Interpretation der Modellkalkulation

In der vorliegenden Arbeit, deren erster und zweiter Teil in den vorangegangenen Heften dieser Zeitschrift veröffentlicht wurden, werden die Kosten der “Weichkäserei” am Beispiel der Herstellung von Camembert- und Brie-Käse modellhaft bestimmt. Damit werden die im Jahr 1970 in gleicher Zeitschrift (Heft 5, Band 22) veröffentlichten Analysen der Produktionskosten in Camembertkäsereien hinsichtlich der Funktionsinhalte ausgedehnt und dem neuesten Stand der Technik sowie heutigen Produktionsstrukturen im Weichkäsesektor angepaßt. Gleichzeitig sind die generell für alle Modellabteilungen geltenden methodischen Weiterentwicklungen (2) in den Kalkulationen berücksichtigt worden. In den sechs Unterabteilungen Vorstapelung, Bruchbereitung/Portionierung, Umhorden/Salzen, Reifung, Abpackung und Fertiglager werden aus der Produktgruppe Weichkäse die Sorten Camembert mit 30 und 60 % F.i.Tr. sowie Brie mit 45 % F.i.Tr. in unterschiedlichen Stückgrößen hergestellt und hinsichtlich ihrer Kostenverursachung untersucht. Zur Bestimmung der Modellkosten wurden vier Modelle gebildet, deren Kapazitäten in der Kesselmilchverarbeitung zwischen 8.000 und 30.000 l/h liegen. In Abhängigkeit vom Beschäftigungsgrad, der für Werte zwischen 15 und 100 % simuliert wurde, können so die Kosten für Käsemengen zwischen rd. 700-17.0001 Käse/Jahr bestimmt werden.Nach den vorgegebenen Kapazitäten sind die technischen Voraussetzungen der einzelnen Unterabteilungen modellspezifisch festgelegt worden, wobei die technische Auslegung an eine verringerte Auslastung bei 65 und 33%iger Beschäftigung angepaßt wurde. Die zu tätigenden Investitionen für die Grundversion betragen 25,0 Mio DM im Modell 1 und 54,5 Mio DM im Modell 4. Bezogen auf die jeweilige Outputmenge an Käse ergeben sich hieraus spezifische Investitionen, die sich mit zunehmender Modellgröße von 5.125 auf 3.205 DM/t jährliche Käsemenge erheblich senken. Produktspezifische Investitionen und Faktormengenverbräuche führen zu den Einzelkosten der ausgewählten Weichkäseprodukte, die z.B. für den Camembert mit 60 % F.i.Tr. je nach Modellgrößeund Beschäftigungsgrad zwischen 500,7 Pf/kg und 620,2 Pf/kg Käse liegen. Die Gesamtkosten der Abteilung “Weichkäserei”, die sich aus den Einzelkosten der Produkte und den Einzelkosten der Abteilung zusammensetzen, betragen im größten Modell bei 100%iger Beschäftigung 522,1 Pf/kg Käse, die sich im kleinsten Modell bei nur 15%iger Beschäftigung auf 1.027,6 Pf/kg Käse erhöhen. Bei einem Beschäftigungsgrad von 65 %, dem die Produktionsmenge eines 2-Schichtbetriebes zugeordnet ist, entfallen von den Gesamtkosten der Abteilung je nach Modellgröße 62-72 % auf die Rohstoffkosten, 14-20 % auf die Anlagekosten und 4-7 % auf die Personalkosten, während die übrigen Kostenartengruppen nur von geringerer Bedeutung sind. Betrachtet man die Gesamtkosten (ohne Rohstoffkosten) hinsichtlich ihrer Entstehung in den Unterabteilungen, so ist festzustellen, daß die Unterabteilungen Bruchbereitung/Portionierung sowie Abpackung die höchsten Kosten verursachen. Für einen Beschäftigungsgrad von 65 % betragen die Kosten in den Unterabteilungen Bruchbereitung/Portionierung im Modell 1 85,8 Pf/kg, die mit zunehmender Modellgröße auf 45,9 Pf/kg im Modell 4 zurückgehen. Die Kosten für die Abpackung liegen im Modell 1 bei 76,2 Pf/kg, während sie im Modell 4 nur noch 58,3 Pf/kg betragen. Die geringsten Kosten verursacht die Unterabteilung Fertiglager mit 2,6 Pf/kg im kleinsten und 1,5 Pf/kg im größten Modell bei 65%iger Beschäftigung. Die Ergebnisse der Modellabteilungsrechnung lassen erkennen, daß mit zunehmender Kapazitätsgröße und ansteigendem Beschäftigungsgrad erhebliche Stückkostendegressionen zu erreichen sind, die bei betriebsindividuellen oder branchenbedingten Entscheidungen genutzt werden sollten. So empfiehlt es sich, daß auf eine dem Markt angepaßte Produktion auch eine auf die geplante Tagesproduktionsmenge angepaßte Ausstattung der Abteilung folgt, da sich, wie in den Modellkostenkurven bei 65 und 33 % Beschäftigung dargestellt, die Kosten sprunghaft senken können. Kostendegressionseffekte werden auch erreicht, wenn durch Spezialisierung der Stückkäse-Produktion die Vielfalt der Formatgrößen eingeschränkt werden kann. Das höchste Kosteneinsparungspotential ist aber durch Strukturveränderungen im Weichkäsesektor zu erwarten, die, wie an zwei Beispielen erläutert, der Branche langfristige Kosteneinsparungen von rd.25 bzw. 95 Mio DM/Jahr ermöglichen können.

12" x 9" envelope from the Department of Interior to H. M. Spencer

This envelope is addressed to H. M. Spencer from the patent office of the Department of Interior. The stamp is dated March 28th of 1911. H.M. Spencer's address is written as R. F. D. No. 1, Cheraw, South Carolina, and the envelope has been written on mathematically with pencil.