Sedative load and frailty among community-dwelling population aged ≥65 years

OBJECTIVE: To explore the association between use of sedative drugs and frailty. DESIGN: Cross-sectional study. SETTING: First wave of The Irish Longitudinal Study on Ageing (TILDA), a nationally representative cohort of the community-dwelling population aged 50 years or older in Ireland. PARTICIPANTS: Participants were 1642 men and 1804 women aged 65 years or older. MEASUREMENTS: Regular use of sedative drugs determined according to the sedative load (SL) model, frailty phenotype status, and frailty deficit index (FI) score assessed using validated, established protocols. RESULTS: Overall, 19% of the participants took sedative drugs, most frequently hypnotics and antidepressants. Sedative drug use was at 46% for frail, 23% for prefrail, and 9% for nonfrail participants. After adjustment for covariates, SL was positively associated with being prefrail (odds ratio [OR] 1.27; 95% confidence interval [CI] 1.11-1.46) and frail (OR 1.30; 95% CI 1.02-1.64). Advancing age but not sex remained significant (P < .001). After adjustment for covariates, the association between SL and the FI was also significant at P ≤ .001 (β = 1.77; 95% CI 1.13-2.42). CONCLUSION: Higher SL was positively associated with phenotype frailty and the FI. This suggests that careful consideration must be given when prescribing sedatives to frail older adults, who are most vulnerable to adverse drug reactions and adverse health outcomes.

Measurement of residual stress by load and depth sensing indentation with spherical indenters

A new experimental technique is presented for making measurements of biaxial residual stress using load and depth sensing indentation (nanoindentation). The technique is based on spherical indentation, which, in certain deformation regimes, can be much more sensitive to residual stress than indentation with sharp pyramidal indenters like the Berkovich. Two different methods of analysis were developed: one requiring an independent measure of the material's yield strength and the other a reference specimen in the unstressed state or other known reference condition. Experiments conducted on aluminum alloys to which controlled biaxial bending stresses were applied showed that the methods are capable of measuring the residual stress to within 10-20% of the specimen yield stress. Because the methods do not require imaging of the hardness impressions, they are potentially useful for making localized measurements of residual stress, as in thin films or small volumes, or for characterization of point-to-point spatial variations of the surface stress.

Using cognitive load theory to interpret student difficulties with a problem-based learning approach to engineering education:a case study

This article reports on an investigationwith first year undergraduate ProductDesign and Management students within a School of Engineering and Applied Science. The students at the time of this investigation had studied fundamental engineering science and mathematics for one semester. The students were given an open ended, ill-formed problem which involved designing a simple bridge to cross a river.They were given a talk on problemsolving and given a rubric to follow, if they chose to do so.They were not given any formulae or procedures needed in order to resolve the problem. In theory, they possessed the knowledge to ask the right questions in order tomake assumptions but, in practice, it turned out they were unable to link their a priori knowledge to resolve this problem. They were able to solve simple beam problems when given closed questions. The results show they were unable to visualize a simple bridge as an augmented beam problem and ask pertinent questions and hence formulate appropriate assumptions in order to offer resolutions.

Connection design without accurate LV feeder load data:an argument for LV monitoring

Since privatisation, maintenance of DNO LV feeder maximum demand information has gradually demised in some Utility Areas, and it is postulated that lack of knowledge about 11kV and LV electrical networks is resulting in a less economical and energy efficient Network as a whole. In an attempt to quantify the negative impact, this paper examines ten postulated new connection scenarios for a set of real LV load readings, in order to find the difference in design solutions when LV load readings were and were not known. The load profiles of the substations were examined in order to explore the utilisation profile. It was found that in 70% of the scenarios explored, significant cost differences were found. These cost differences varied by an average of 1000%, between schemes designed with and without load readings. Obviously, over designing a system and therefore operating more, underutilised transformers becomes less financially beneficial and less energy efficient. The paper concludes that new connection design is improved in terms of cost when carried out based on known LV load information and enhances the case for regular maximum feeder demand information and/or metering of LV feeders. © 2013 IEEE.

Application of automatic load transfer on feeder utilisation balance

This paper looks at how automatic load transfer may be used as a possible planning tool to help deliver faster connections for customers. A trial on an area of overhead line Network is presented to show how improvements in % feeder utilisation may be realised by changing the location of the open point. The reported Network data is compared to calculated data under two different configurations over a two week trial period. The results show that ALT open point determination in the presence of generation is different from a load only circuit and that the open points may not be fixed with time. Looking at improvements in Network headroom may not be conducive to other improvements in the network such as loss reduction or improving voltage profiles.

Applying consumer responsibility principle in evaluating environmental load of carbon emissions

There is a need for a proper indicator in order to assess the environmental impact of international trade, therefore using the carbon footprint as an indicator can be relevant and useful. The aim of this study is to show from a methodological perspective how the carbon footprint, combined with input- output models can be used for analysing the impacts of international trade on the sustainable use of national resources in a country. The use of the input-output approach has the essential advantage of being able to track the transformation of goods through the economy. The study examines the environmental impact of consumption related to international trade, using the consumer responsibility principle. In this study the use of the carbon footprint and input-output methodology is shown on the example of the Hungarian consumption and the impact of international trade. Moving from a production- based approach in climate policy to a consumption-perspective principle and allocation, would also help to increase the efficiency of emission reduction targets and the evaluation of the ecological impacts of international trade.

Applying consumer responsibility principle in evaluating environmental load of carbon emissions

There is a need for a proper indicator in order to assess the environmental impact of international trade, therefore using the carbon footprint as an indicator can be relevant and useful. The aim of this study is to show from a methodological perspective how the carbon footprint, combined with input- output models can be used for analysing the impacts of international trade on the sustainable use of national resources in a country. The use of the input-output approach has the essential advantage of being able to track the transformation of goods through the economy. The study examines the environmental impact of consumption related to international trade, using the consumer responsibility principle. In this study the use of the carbon footprint and input-output methodology is shown on the example of the Hungarian consumption and the impact of international trade. Moving from a production- based approach in climate policy to a consumption-perspective principle and allocation, would also help to increase the efficiency of emission reduction targets and the evaluation of the ecological impacts of international trade.

Stability of Ampelometric Characteristics of Vitis vinifera L. cv. 'Syrah' and 'Sauvignon blanc' Leaves: Impact of Within-vineyard Variability and Pruning Method/Bud Load

Historically, grapevine (Vitis vinifera L.) leaf characterisation has been a driving force in the identification of cultivars. In this study, ampelometric (foliometric) analysis was done on leaf samples collected from hand-pruned, mechanically pruned and minimally pruned ‘Sauvignon blanc’ and ‘Syrah’ vines to estimate the impact of within-vineyard variability and a change in bud load on the stability of leaf properties. The results showed that within-vineyard variability of ampelometric characteristics was high within a cultivar, irrespective of bud load. In terms of the O.I.V. coding system, zero to four class differences were observed between minimum and maximum values of each characteristic. The value of variability of each characteristic was different between the three levels of bud load and the two cultivars. With respect to bud load, the number of shoots per vine had a significant effect on the characteristics of the leaf laminae. Single leaf area and lengths of veins changed significantly for both cultivars, irrespective of treatment, while angle between veins proved to be a stable characteristic. A large number of biometric data can be recorded on a single leaf; the data measured on several leaves, however, are not necessarily unique for a specific cultivar. The leaf characteristics analysed in this study can be divided into two groups according to the response to a change in bud load, i.e. stable (angles between the veins, depths of sinuses) and variable (length of the veins, length of the petiole, single leaf area). The variable characteristics are not recommended to be used in cultivar identification, unless the pruning method/bud load is known.

Aerodynamic load characteristics evaluation and tri-axial performance testing on fiber reinforced polymer connections and metal fasteners to promote hurricane damage mitigation

Damages during extreme wind events highlight the weaknesses of mechanical fasteners at the roof-to-wall connections in residential timber frame buildings. The allowable capacity of the metal fasteners is based on results of unidirectional component testing that do not simulate realistic tri-axial aerodynamic loading effects. The first objective of this research was to simulate hurricane effects and study hurricane-structure interaction at full-scale, facilitating better understanding of the combined impacts of wind, rain, and debris on inter-component connections at spatial and temporal scales. The second objective was to evaluate the performance of a non-intrusive roof-to-wall connection system using fiber reinforced polymer (FRP) materials and compare its load capacity to the capacity of an existing metal fastener under simulated aerodynamic loads. ^ The Wall of Wind (WoW) testing performed using FRP connections on a one-story gable-roof timber structure instrumented with a variety of sensors, was used to create a database on aerodynamic and aero-hydrodynamic loading on roof-to-wall connections tested under several parameters: angles of attack, wind-turbulence content, internal pressure conditions, with and without effects of rain. Based on the aerodynamic loading results obtained from WoW tests, sets of three force components (tri-axial mean loads) were combined into a series of resultant mean forces, which were used to test the FRP and metal connections in the structures laboratory up to failure. A new component testing system and test protocol were developed for testing fasteners under simulated triaxial loading as opposed to uni-axial loading. The tri-axial and uni-axial test results were compared for hurricane clips. Also, comparison was made between tri-axial load capacity of FRP and metal connections. ^ The research findings demonstrate that the FRP connection is a viable option for use in timber roof-to-wall connection system. Findings also confirm that current testing methods of mechanical fasteners tend to overestimate the actual load capacities of a connector. Additionally, the research also contributes to the development a new testing protocol for fasteners using tri-axial simultaneous loads based on the aerodynamic database obtained from the WoW testing. ^

The effect of cognitive load on deception

The current study applied classic cognitive capacity models to examine the effect of cognitive load on deception. The study also examined whether the manipulation of cognitive load would result in the magnification of differences between liars and truth-tellers. In the first study, 87 participants engaged in videotaped interviews while being either deceptive or truthful about a target event. Some participants engaged in a concurrent secondary task while being interviewed. Performance on the secondary task was measured. As expected, truth tellers performed better on secondary task items than liars as evidenced by higher accuracy rates. These results confirm the long held assumption that being deceptive is more cognitively demanding than being truthful. In the second part of the study, the videotaped interviews of both liars and truth-tellers were shown to 69 observers. After watching the interviews, observers were asked to make a veracity judgment for each participant. Observers made more accurate veracity judgments when viewing participants who engaged in a concurrent secondary task than when viewing those who did not. Observers also indicated that participants who engaged in a concurrent secondary task appeared to think harder than participants who did not. This study provides evidence that engaging in deception is more cognitively demanding than telling the truth. As hypothesized, having participants engage in a concurrent secondary task led to the magnification of differences between liars and truth tellers. This magnification of differences led to more accurate veracity rates in a second group of observers. The implications for deception detection are discussed.

Lateral load distribution for curved steel I -girder bridges

Lateral load distribution factor is a key factor for designing and analyzing curved steel I-girder bridges. In this dissertation, the effects of various parameters on moment and shear distribution for curved steel I-girder bridges were studied using the Finite Element Method (FEM). The parameters considered in the study were: radius of curvature, girder spacing, overhang, span length, number of girders, ratio of girder stiffness to overall bridge stiffness, slab thickness, girder longitudinal stiffness, cross frame spacing, and girder torsional inertia. The variations of these parameters were based on the statistical analysis of the real bridge database, which was created by extracting data from existing or newly designed curved steel I-girder bridge plans collected all over the nation. A hypothetical bridge superstructure model that was made of all the mean values of the data was created and used for the parameter study. ^ The study showed that cross frame spacing and girder torsional inertia had negligible effects. Other parameters had been identified as key parameters. Regression analysis was conducted based on the FEM analysis results and simplified formulas for predicting positive moment, negative moment, and shear distribution factors were developed. Thirty-three real bridges were analyzed using FEM to verify the formulas. The ratio of the distribution factor obtained from the formula to the one obtained from the FEM analysis, which was referred to as the g-ratio, was examined. The results showed that the standard deviation of the g-ratios was within 0.04 to 0.06 and the mean value of the g-ratios was greater than unity by one standard deviation. This indicates that the formulas are conservative in most cases but not overly conservative. The final formulas are similar in format to the current American Association of State Highway and Transportation Officials (AASHTO) Load Resistance and Factor Design (LRFD) specifications. ^ The developed formulas were compared with other simplified methods. The outcomes showed that the proposed formulas had the most accurate results among all methods. ^ The formulas developed in this study will assist bridge engineers and researchers in predicting the actual live load distribution in horizontally curved steel I-girder bridges. ^

Effects of worked examples and algebra problem -solving skill on error and cognitive load

This study determined the levels of algebra problem solving skill at which worked examples promoted learning of further problem solving skill and reduction of cognitive load in college developmental algebra students. Problem solving skill was objectively measured as error production; cognitive load was subjectively measured as perceived mental effort. ^ Sixty-three Ss were pretested, received homework of worked examples or mass problem solving, and posttested. Univarate ANCOVA (covariate = previous grade) were performed on the practice and posttest data. The factors used in the analysis were practice strategy (worked examples vs. mass problem solving) and algebra problem solving skill (low vs. moderate vs. high). Students in the practice phase who studied worked examples exhibited (a) fewer errors and reduced cognitive load, at moderate skill; (b) neither fewer errors nor reduced cognitive load, at low skill; and (c) only reduced cognitive load, at high skill. In the posttest, only cognitive load was reduced. ^ The results suggested that worked examples be emphasized for developmental students with moderate problem solving skill. Areas for further research were discussed. ^

The influence of neurocognitive impairment, alcohol and other drug (AOD) use, and psychosocial factors on antiretroviral treatment adherence, service utilization and viral load among HIV-seropositive adults

Among people living with HIV (PLWH), adherence to antiretroviral therapy (ART) can be affected by problems of neurocognitive (NC) impairment, stress, alcohol and other drug (AOD) abuse, and other barriers. The aims of this research were to: (1) examine factors associated with NC impairment, (2) explore relationships between psychosocial variables with ART adherence and viral load (VL), and (3) evaluate the efficacy of an evidence-based intervention in improving ART adherence, increasing service utilization, and decreasing VL. The first study (n=370) was cross sectional and used structural equation modeling to test whether AOD use, years living with HIV, and time from HIV diagnosis to seeking care were associated with poorer NC functioning. The second study (n=246) used similar methods to test the hypothesis that stress, barriers to adherence, NC impairment, poor social support, and AOD use were related to lower VL mediated by ART adherence. The third study (n=243) evaluated an evidence-based, eight-session program to improve ART adherence, reduce VL, and increase service utilization in a randomized controlled trial. Study participants were PLWH living in South Florida, 18 to 60 years old, with a history of alcohol abuse enrolled from January 2009 through November 2012. Secondary analysis of available data showed: (1) scores on interference with executive functioning increased by 0.32 for each day of marijuana use and 1.18 for each year living with HIV, but no association was found between alcohol use and NC functioning; (2) each barrier to adherence was associated with a 10% decrease in adherence to ART and a 0.42 unit increase in VL (log10) and the relationship between barriers and VL was partially mediated by ART adherence; (3) participants in the evidence-based program were more likely than the comparison group to report an undetectable VL (OR=2.25, p<0.01) at 6 months, but not 3 months, post-intervention. Psychosocial factors affect VL, but ART adherence is essential in achieving an undetectable VL in PLWH.