Study of thermal spin crossover in [Fe(II)(isoxazole)6](BF4)2 with Mössbauer spectroscopy

57Fe Mössbauer spectroscopy of the mononuclear [Fe(II)(isoxazole)6](BF4) 2compound has been studied to reveal the thermal spin crossover of Fe(II) between low-spin (S = 0) and high-spin (S = 2) states. A temperature-dependent spin transition curve has been constructed with the least-square fitted data obtained from the Mössbauer spectra measured at various temperatures in the 240-60K range during the cooling and heating cycle. The compound exhibits a temperature-dependent two-step spin transition phenomenon with Tsco (step 1) = 92 and Tsco (step2) = 191K. The compound has three high-spin Fe(II) sites at the highest temperature of study; among them, two have slightly different coordination environments. These two Fe(II) sites are found to undergo a spin transition, while the third Fe(II) site retains the high-spin state over the whole temperature range. Possible reasons for the formation of the two steps in the spin transition curve are discussed. The observations made from the present study are in complete agreement with those envisaged from earlier magnetic and structural studies made on [Fe(II)(isoxazole)6](BF4)2, but highlights the nature of the spin crossover mechanism.

A new method for respiratory-volume monitoring based on long-period fibre gratings

Respiratory-volume monitoring is an indispensable part of mechanical ventilation. Here we present a new method of the respiratory-volume measurement based on a single fibre-optical long-period sensor of bending and the correlation between torso curvature and lung volume. Unlike the commonly used air-flow based measurement methods the proposed sensor is drift-free and immune to air-leaks. In the paper, we explain the working principle of sensors, a two-step calibration-test measurement procedure and present results that establish a linear correlation between the change in the local thorax curvature and the change of the lung volume. We also discuss the advantages and limitations of these sensors with respect to the current standards. © 2013 IEEE.

Amine-functionalised hexagonal mesoporous silica as support for copper(II) acetylacetonate catalyst

Copper(II) acetylacetonate was anchored onto a hexagonal mesoporous silica (HMS) material using a two-step procedure: (i) functionalisation of the surface hydroxy groups with (3-aminopropyl)triethoxysilane (AMPTSi) and then (ii) anchoring of the copper(II) complex through Schiff condensation with free amine groups, using two different metal complex loadings. Upon the first step, nitrogen elemental analysis, XPS and DRIFT showed the presence of amine groups on the surface of the HMS material, and porosimetry indicated that the structure of the mesoporous material remained unchanged, although a slight decrease in surface area was observed. Atomic absorption, XPS and DRIFT showed that copper(II) acetylacetonate was anchored onto the amine-functionalised HMS by Schiff condensation between the free amine groups and the carbonyl groups of the copper(II) complex; using EPR an NO3 coordination sphere was proposed for the anchored copper(II) complex. The new [Cu(acac)2]-AMPTSi/HMS materials were tested in the aziridination of styrene at room temperature, using PhI=NTs as nitrogen source and acetonitrile as solvent. The styrene conversion and total TON of the heterogeneous phase reaction are higher than those of the same reaction catalysed in homogeneous phase by [Cu(acac)2]; nevertheless, the initial activity decreases and the reaction time increases due to substrate and product diffusion limitations. The heterogeneous catalyst showed a successive slight decrease in catalytic activity when reused for two more times. © Wiley-VCH Verlag GmbH & Co. KGaA, 2006.

Efficient purification of chromatin architectural proteins:histones, HMGB proteins and FKBP3 (FKBP25) immunophilin

A two-step process of high ionic strength lysis of chicken erythrocyte cell nuclei followed by cation-exchange chromatography has separated at very high yield all the histone and HMGB (high-mobility group B) nuclear proteins, except the less-soluble histone tetramers. Surprisingly high yields of the nuclear immunophilin FKBP3 (FKBP25) and Hsp70 (heat-shock protein 70) co-fractionate with HMGB1 and HMGB3. Furthermore, these proteins can be separated by anion-exchange chromatography. The purified nuclear proteins retain their native, post-translational modification (PTM) marks, including those associated with chromatin-fibre remodelling. These marks are intimately associated with the control of the cell cycle. The methods herein are therefore of value for targeting these and other nuclear proteins for future proteomic studies in healthy and diseased cells. This journal is © 2012 The Royal Society of Chemistry.

A potentially scalable method for the harvesting of hMSCs from microcarriers

The use of hMSCs for allogeneic therapies requiring lot sizes of billions of cells will necessitate large-scale culture techniques such as the expansion of cells on microcarriers in bioreactors. Whilst much research investigating hMSC culture on microcarriers has focused on growth, much less involves their harvesting for passaging or as a step towards cryopreservation and storage. A successful new harvesting method has recently been outlined for cells grown on SoloHill microcarriers in a 5L bioreactor [1]. Here, this new method is set out in detail, harvesting being defined as a two-step process involving cell 'detachment' from the microcarriers' surface followed by the 'separation' of the two entities. The new detachment method is based on theoretical concepts originally developed for secondary nucleation due to agitation. Based on this theory, it is suggested that a short period (here 7min) of intense agitation in the presence of a suitable enzyme should detach the cells from the relatively large microcarriers. In addition, once detached, the cells should not be damaged because they are smaller than the Kolmogorov microscale. Detachment was then successfully achieved for hMSCs from two different donors using microcarrier/cell suspensions up to 100mL in a spinner flask. In both cases, harvesting was completed by separating cells from microcarriers using a Steriflip® vacuum filter. The overall harvesting efficiency was >95% and after harvesting, the cells maintained all the attributes expected of hMSC cells. The underlying theoretical concepts suggest that the method is scalable and this aspect is discussed too. © 2014 The Authors.

Using overlay test to evaluate fracture properties of field-aged asphalt concrete

Field material testing provides firsthand information on pavement conditions which are most helpful in evaluating performance and identifying preventive maintenance or overlay strategies. High variability of field asphalt concrete due to construction raises the demand for accuracy of the test. Accordingly, the objective of this study is to propose a reliable and repeatable methodology to evaluate the fracture properties of field-aged asphalt concrete using the overlay test (OT). The OT is selected because of its efficiency and feasibility for asphalt field cores with diverse dimensions. The fracture properties refer to the Paris’ law parameters based on the pseudo J-integral (A and n) because of the sound physical significance of the pseudo J-integral with respect to characterizing the cracking process. In order to determine A and n, a two-step OT protocol is designed to characterize the undamaged and damaged behaviors of asphalt field cores. To ensure the accuracy of determined undamaged and fracture properties, a new analysis method is then developed for data processing, which combines the finite element simulations and mechanical analysis of viscoelastic force equilibrium and evolution of pseudo displacement work in the OT specimen. Finally, theoretical equations are derived to calculate A and n directly from the OT test data. The accuracy of the determined fracture properties is verified. The proposed methodology is applied to a total of 27 asphalt field cores obtained from a field project in Texas, including the control Hot Mix Asphalt (HMA) and two types of warm mix asphalt (WMA). The results demonstrate a high linear correlation between n and −log A for all the tested field cores. Investigations of the effect of field aging on the fracture properties confirm that n is a good indicator to quantify the cracking resistance of asphalt concrete. It is also indicated that summer climatic condition clearly accelerates the rate of aging. The impact of the WMA technologies on fracture properties of asphalt concrete is visualized by comparing the n-values. It shows that the Evotherm WMA technology slightly improves the cracking resistance, while the foaming WMA technology provides the comparable fracture properties with the HMA. After 15 months aging in the field, the cracking resistance does not exhibit significant difference between HMA and WMAs, which is confirmed by the observations of field distresses.

UV inscribed long period gratings with femtosecond ablated axial fibre slots for polarization control

We present data on the development a new type of optical fibre polariser and the characterisation of its wavelength properties. The device is fashioned using a two step process. Firstly, a standard UV long period grating (LPG) with a period of 330μm is inscribed into hydrogenated SMF-28, followed by femtosecond laser ablation of a groove parallel to the fibre axis. The UV inscribed LPGs have inherently low birefringence. However, the removal of the cladding layer parallel to the location of the LPG within the fibre core (as a result the ablation) modifies the cladding modes that couple with the LPG. Furthermore, the groove breaks the fibre symmetry introducing a non-uniform stress profile across the fibre cross section leading to significant birefringence. We show that increasing the depth of the groove increases the birefringence, and this behaviour coupled with the ability to control the wavelength location of the LPGs attenuations peaks results in a polariser able to operate at almost any wavelength and birefringence. The maximum birefringence reported here as polarisation mode splitting was approximately 39±0.1nm with a polarisation loss of 10dB. © 2011 Copyright Society of Photo-Optical Instrumentation Engineers (SPIE).

Improved methodology to evaluate fracture properties of warm-mix asphalt using overlay test

This study developed a reliable and repeatable methodology to evaluate the fracture properties of asphalt mixtures with an overlay test (OT). In the proposed methodology, first, a two-step OT protocol was used to characterize the undamaged and damaged behaviors of asphalt mixtures. Second, a new methodology combining the mechanical analysis of viscoelastic force equilibrium in the OT specimen and finite element simulations was used to determine the undamaged properties and crack growth function of asphalt mixtures. Third, a modified Paris's law replacing the stress intensity factor by the pseudo J-integral was employed to characterize the fracture behavior of asphalt mixtures. Theoretical equations were derived to calculate the parameters A and n (defined as the fracture properties) in the modified Paris's law. The study used a detailed example to calculate A and n from the OT data. The proposed methodology was successfully applied to evaluate the impact of warm-mix asphalt (WMA) technologies on fracture properties. The results of the tested specimens showed that Evotherm WMA technology slightly improved the cracking resistance of asphalt mixtures, while foaming WMA technology provided comparable fracture properties. In addition, the study found that A decreased with the increase in n in general. A linear relationship between 2log(A) and n was established.

Munkavállalói preferenciák az egyetemi hallgatók körében = Employees' preferences according to graduates and undergraduates

Napjaink munkaerőpiaci tendenciái következtében egyre több figyelem irányul az atipikus munkavégzésre. Az atipikus munkavégzésben rejlő lehetőségeket a munkavállalók oldaláról vizsgáltuk. Ennek érdekében egy kétfázisú kutatássorozatot hajtottuk végre a Budapesti Corvinus Egyetem hallgatói körében. A felmérés rámutatott arra, hogy az egyetemi hallgatók már az egyetemi tanulmányaik alatt is potenciális munkaerőt jelentenek. Foglalkoztatásuk során a legfontosabb tényező a rugalmas, tanulmányokkal összeegyeztethető munkavégzés. A második kutatás fő célja a teljes életcikluson keresztüli munkavállalói preferenciák feltárása volt. A hallgatók által a két leginkább előnybe részesített munkavállalási forma a napi nyolcórás munkaviszony rugalmas munkaidőben és a saját vállalkozás indítása. A hallgatók elsősorban magas jövedelmet, ezt követően stabil, biztos jövedelmet, fejlődési lehetőséget, és a munka és magánélet egyensúlyát várják el munkahelyüktől. A tanulmány rámutat az egyes alcsoportok különbségeire, illetve kiindulópontot jelenthet további kutatásokhoz. _____ More and more attention is paid to atypical work due to workplace trends. Increasing opportunities deriving from atypical work have been investigated from employees’ viewpoint in this paper. We conducted a two-step survey amongst graduates and undergraduates of Corvinus University of Budapest. The survey pointed out that undergraduates are potential workers as well, and the most important factor for them was the flexible form of work. The second survey aimed to explore employees’ preferences through a whole lifetime period. The two most popular forms of work were flexible full-time jobs and starting their own enterprise. Students prefer high salaries, a stable and secure income, opportunities for development and work-life balance. The surveys pointed out some differences between subgroups and their conclusions could be a starting point for future research.

Selection and passage of county land preservation voter referendum: The role of government

County jurisdictions in America are increasingly exercising self-government in the provision of public community services through the context of second order federalism. In states exercising this form of contemporary governance, county governments with "reformed" policy-making structures and professional management practices, have begun to rival or surpass municipalities in the delivery of local services with regional implications such as environmental protection (Benton 2002, 2003; Marando and Reeves, 1993). ^ The voter referendum, a form of direct democracy, is an important component of county land preservation and environmental protection governmental policies. The recent growth and success of land preservation voter referendums nationwide reflects an increase in citizen participation in government and their desire to protect vacant land and its natural environment from threats of over-development, urbanization and sprawl, loss of open space and farmland, deterioration of ecosystems, and inadequate park and recreational amenities. ^ The study's design employs a sequential, mixed method. First, a quantitative approach employs the Heckman two-step model. It is fitted with variables for the non-random sample of 227 voter referendum counties and all non-voter referendum counties in the U.S. from 1988 to 2009. Second, the qualitative data collected from the in-depth investigation of three South Florida county case studies with twelve public administrator interviews is transformed for integration with the quantitative findings. The purpose of the qualitative method is to complement, explain and enrich the statistical analysis of county demographic, socio-economic, terrain, regional, governance and government, political preference, environmentalism, and referendum-specific factors. ^ The research finds that government factors are significant in terms of the success of land preservation voter referendums; more specifically, the presence of self-government authority (home rule charter), a reformed structure (county administrator/manager or elected executive), and environmental interest groups. In addition, this study concludes that successful counties are often located coastal, exhibit population and housing growth, and have older and more educated citizens who vote democratic in presidential elections. The analysis of case study documents and public administrator interviews finds that pragmatic considerations of timing, local politics and networking of regional stakeholders are also important features of success. Further research is suggested utilizing additional public participation, local government and public administration factors.^

Database of the GLAMAP project

A uniform chronology for foraminifera-based sea surface temperature records has been established in more than 120 sediment cores obtained from the equatorial and eastern Atlantic up to the Arctic Ocean. The chronostratigraphy of the last 30,000 years is mainly based on published d18O records and 14C ages from accelerator mass spectrometry, converted into calendar-year ages. The high-precision age control provides the database necessary for the uniform reconstruction of the climate interval of the Last Glacial Maximum within the GLAMAP-2000 project.

Age determinations of bottom sediments from the Sea of Okhotsk by different methods

On the base of data on benthic foraminifera and sediment biogeochemistry (contents of total organic carbon, calcium carbonate and biogenic opal) in two cores (1265 and 1312 m water depth) from the southeastern Sakhalin slope and one core (839 m water depth) from the southwestern Kamchatka slope variations of the oxygen minimum zone during the last 50 ka in the Okhotsk Sea are reconstructed. The oxygen minimum zone was less pronounced during cooling in the MIS 2 that is suggested to be caused by maximal expansion of the sea ice cover, decrease of marine productivity and increase of production of oxygenated Okhotsk Sea Intermediate Water (OSIW). Two-step-like strengthening of oxygen minimum zone during warmings in the Terminations 1a and 1b was combined with (1) enhanced oxygen consumption due to decomposition of large amount of organic matter in the water column and bottom sediments due to increased marine productivity and supply of terrigenous material from submerged northern shelves; (2) sea ice cover retreat and reduction of OSIW production; (3) freely inflow of the oxygen-depleted intermediate water mass from the North Pacific.

Nitric-acid Hydrolysis of Miscanthus giganteus to Sugars Fermented to Bioethanol

Peer reviewed

Epitaxial growth of visible to infra-red transparent conducting In2O3 nanodot dispersions and reversible charge storage as a Li-ion battery anode

Unique bimodal distributions of single crystal epitaxially grown In2O3 nanodots on silicon are shown to have excellent IR transparency greater than 87% at IR wavelengths up to 4 μm without sacrificing transparency in the visible region. These broadband antireflective nanodot dispersions are grown using a two-step metal deposition and oxidation by molecular beam epitaxy, and backscattered diffraction confirms a dominant (111) surface orientation. We detail the growth of a bimodal size distribution that facilitates good surface coverage (80%) while allowing a significant reduction in In2O3 refractive index. This unique dispersion offers excellent surface coverage and three-dimensional volumetric expansion compared to a thin film, and a step reduction in refractive index compared to bulk active materials or randomly porous composites, to more closely match the refractive index of an electrolyte, improving transparency. The (111) surface orientation of the nanodots, when fully ripened, allows minimum lattice mismatch strain between the In2O3 and the Si surface. This helps to circumvent potential interfacial weakening caused by volume contraction due to electrochemical reduction to lithium, or expansion during lithiation. Cycling under potentiodynamic conditions shows that the transparent anode of nanodots reversibly alloys lithium with good Coulombic efficiency, buffered by co-insertion into the silicon substrate. These properties could potentially lead to further development of similarly controlled dispersions of a range of other active materials to give transparent battery electrodes or materials capable of non-destructive in situ spectroscopic characterization during charging and discharging.

Biochemical and Structural Studies on PrfA, the Transcriptional Regulator of Virulence in Listeria monocytogenes

Abstract

Listeria monocytogenes is a gram-positive soil saprophytic bacterium that is capable of causing fatal infection in humans. The main virulence regulator PrfA, a member of the Crp/FNR family of transcriptional regulators, activates the expression of essential proteins required for host cell invasion and cell-to-cell spread. The mechanism of PrfA activation and the identity of its small molecule coactivator have remained a mystery for more than 20 years, but it is hypothesized that PrfA shares mechanistic similarity to the E. coli cAMP binding protein, Crp. Crp activates gene expression by binding cAMP, increasing the DNA binding affinity of the protein and causing a significant DNA bend that facilitates RNA polymerase binding and downstream gene activation. Our data suggests PrfA activates virulence protein expression through a mechanism distinct from the canonical Crp activation mechanism that involves a combination of cysteine residue reduction and glutathione (GSH) binding.

Listeria lacking glutathione synthase (ΔgshF) is avirulent in mice; however virulence is rescued when the bacterium expresses the constitutively active PrfA mutant G145S. Interestingly, Listeria expressing a PrfA mutant in which its four cysteines are mutated to alanine (Quad PrfA), demonstrate a 30-fold decrease in virulence. The Quad and ΔgshF double mutant strains are avirulent. DNA-binding affinity, measured through fluorescence polarization assays, indicate reduction of the cysteine side chains is sufficient to allow PrfA to binds its physiological promoters Phly and PactA with low nanomolar affinity. Oxidized PrfA binds the promoters poorly.

Unexpectedly, Quad also binds promoter DNA with nanomolar affinity, suggesting that the cysteines play a role in transcription efficiency in addition to DNA binding. Both PrfA and Quad bind GSH at physiologically relevant and comparable affinities, however GSH did not affect DNA binding in either case. Thermal denaturation assays suggest that Quad and wild-type PrfA differ structurally upon binding GSH, which supports the in vivo difference in infection between the regulator and its mutant.

Structures of PrfA in complex with cognate DNA, determined through X-ray crystallography, further support the disparity between PrfA and Crp activation mechanisms as two structures of reduced PrfA bound to Phly (PrfA-Phly30 and PrfA-Phly24) suggest the DNA adopts a less bent DNA conformation when compared to Crp-cAMP- DNA. The structure of Quad-Phly30 confirms the DNA-binding data as the protein-DNA complex adopts the same overall conformation as PrfA-Phly.

From these results, we hypothesize a two-step activation mechanism wherein PrfA, oxidized upon cell entry and unable to bind DNA, is reduced upon its intracellular release and binds DNA, causing a slight bend in the promoter and small increase in transcription of PrfA-regulated genes. The structures of PrfA-Phly30 and PrfA-Phly24 likely visualize this intermediate complex. Increasing concentrations of GSH shift the protein to a (PrfA-GSH)-DNA complex which is fully active transcriptionally and is hypothesized to resemble closely the transcriptionally active structure of the cAMP-(Crp)-DNA complex. Thermal denaturation results suggest Quad PrfA is deficient in this second step, which explains the decrease in virulence and implicates the cysteine residues as critical for transcription efficiency. Further structural and biochemical studies are on-going to clarify this mechanism of activation.