Steps in theory-of-mind development for children with deafness or autism

Prior research demonstrates that understanding theory of mind (ToM) is seriously and similarly delayed in late-signing deaf children and children with autism. Are these children simply delayed in timing relative to typical children, or do they demonstrate different patterns of development? The current research addressed this question by testing 145 children (ranging from 3 to 13 years) with deafness, autism, or typical development using a ToM scale. Results indicate that all groups followed the same sequence of steps, up to a point, but that children with autism showed an importantly different sequence of understandings (in the later steps of the progression) relative to all other groups.

Comparison of growth and development of the red-tailed phascogale (Phascogale calura) in three captive colonies

The red-tailed phascogale ( Phascogale calura) is an endangered dasyurid species that has recently been brought into captivity in an effort to increase numbers before release back into the wild. As part of investigations into the reproductive biology of the species, information on the growth and development of young was collected throughout lactation from litters raised in three separate colonies. Growth curves for aging young throughout lactation and a timetable of developmental changes were constructed. While two colonies, with fourth- and fifth-generation captive animals, showed no significant difference in growth, animals from a third colony that had been wild caught before breeding displayed a slower rate of growth from 34 days of age. The pattern of development resembled that of other dasyurids, with young left in the nest from 44 days of age, fully furred by 78 days and weaned between 90 and 110 days. Captive phascogales invest heavily in their young, with litters weighing 380 +/- 67% of maternal bodyweight at weaning.

Reduced variability of postural strategy prevents normalization of motor changes induced by back pain: A risk factor for chronic trouble?

Variability is fundamental to biological systems and is important in posturomotor learning and control. Pain induces a protective postural strategy, although variability is normally preserved. If variability is lost, does the normal postural strategy return when pain stops? Sixteen subjects performed arm movements during control trials, when the movement evoked back pain and then when it did not. Variability in the postural strategy of the abdominal muscles and pain-related cognitions were evaluated. Only those subjects for whom pain induced a reduction in variability of the postural strategy failed to return to a normal strategy when pain stopped. They were also characterized by their pain-related cognitions. Ongoing perception of threat to the back may exert tighter evaluative control over variability of the postural strategy.

Origin and possible roles of the Sox8 transcription factor gene during sexual development

Sox8 is a member of the Sox family of developmental transcription factor genes and is closely related to Sox9, a critical gene involved in mammalian sex determination and differentiation. Both genes encode proteins with the ability to bind similar DNA target sequences, and to activate transcription in in vitro assays. Expression studies indicate that the two genes have largely overlapping patterns of activity during mammalian embryonic development. A knockout of Sox8 in mice has no obvious developmental phenotype, suggesting that the two genes are able to act redundantly in a variety of developmental contexts. In particular, both genes are expressed in the developing Sertoli cell lineage of the developing testes in mice, and both proteins are able to activate transcription of the gene encoding anti-Mullerian hormone (AMH), through synergistic action with steroidogenic factor I (SF1). We have hypothesized that Sox8 may substitute for Sox9 in species where Sox9 is expressed too late to be involved in sex determination or regulation of Amh expression. However, our studies involving the red-eared slider turtle indicate that Sox8 is expressed at similar levels in males and females throughout the sex-determining period, suggesting that Sox8 is neither a transcriptional regulator for Amh, nor responsible for sex determination or gonad differentiation in that species. Similarly, Sox8 is not expressed in a sexually dimorphic pattern during gonadogenesis in the chicken. Since a functional role(s) for Sox8 is implied by its conservation during evolution, the significance of Sox8 for sexual and other aspects of development will need to be uncovered through more directed lines of experimentation. Copyright (C) 2003 S. Karger AG, Basel.

Development of real-time process control systems using formal techniques

A major application of computers has been to control physical processes in which the computer is embedded within some large physical process and is required to control concurrent physical processes. The main difficulty with these systems is their event-driven characteristics, which complicate their modelling and analysis. Although a number of researchers in the process system community have approached the problems of modelling and analysis of such systems, there is still a lack of standardised software development formalisms for the system (controller) development, particular at early stage of the system design cycle. This research forms part of a larger research programme which is concerned with the development of real-time process-control systems in which software is used to control concurrent physical processes. The general objective of the research in this thesis is to investigate the use of formal techniques in the analysis of such systems at their early stages of development, with a particular bias towards an application to high speed machinery. Specifically, the research aims to generate a standardised software development formalism for real-time process-control systems, particularly for software controller synthesis. In this research, a graphical modelling formalism called Sequential Function Chart (SFC), a variant of Grafcet, is examined. SFC, which is defined in the international standard IEC1131 as a graphical description language, has been used widely in industry and has achieved an acceptable level of maturity and acceptance. A comparative study between SFC and Petri nets is presented in this thesis. To overcome identified inaccuracies in the SFC, a formal definition of the firing rules for SFC is given. To provide a framework in which SFC models can be analysed formally, an extended time-related Petri net model for SFC is proposed and the transformation method is defined. The SFC notation lacks a systematic way of synthesising system models from the real world systems. Thus a standardised approach to the development of real-time process control systems is required such that the system (software) functional requirements can be identified, captured, analysed. A rule-based approach and a method called system behaviour driven method (SBDM) are proposed as a development formalism for real-time process-control systems.

An expert system for the development of a health and safety policy/risk assessment in the plastics industry

Health and safety policies may be regarded as the cornerstone for positive prevention of occupational accidents and diseases. The Health and Safety at Work, etc Act 1974 makes it a legal duty for employers to prepare and revise a written statement of a general policy with respect to the health and safety at work of employees as well as the organisation and arrangements for carrying out that policy. Despite their importance and the legal equipment to prepare them, health and safety policies have been found, in a large number of plastics processing companies (particularly small companies), to be poorly prepared, inadequately implemented and monitored. An important cause of these inadequacies is the lack of necessary health and safety knowledge and expertise to prepare, implement and monitor policies. One possible way of remedying this problem is to investigate the feasibility of using computers to develop expert system programs to simulate the health and safety (HS) experts' task of preparing the policies and assisting companies implement and monitor them. Such programs use artificial intelligence (AI) techniques to solve this sort of problems which are heuristic in nature and require symbolic reasoning. Expert systems have been used successfully in a variety of fields such as medicine and engineering. An important phase in the feasibility of development of such systems is the engineering of knowledge which consists of identifying the knowledge required, eliciting, structuring and representing it in an appropriate computer programming language.

Technical entrepreneurship in the UK:an examination of the relationship between the previous occupational background of the technical entrepreneur and the management of the small technology-based venture

With the growing appreciation of the contribution of small technology-based ventures to a healthy economy, an analysis of the individual who initiates and manages such ventures - the technical entrepreneur - is highly desirable, predominantly because of the influence of such an individual on the management and future strategy of the venture. An examination of recent research has indicated that a study of the previous experience and expertise of the entrepreneur, gained in previous occupations, may be highly relevant in determining the possible success of a new venture. This is particularly true where the specific expertise of the entrepreneur forms the main strategic advantage of the business, as in the case of small technology-based firms. Despite this, there has been very little research which has attempted to examine the relationship between the previous occupational background of the technical entrepreneur, and the management of the small technology-based firm. This thesis will examine this relationship, as well as providing an original contribution to the study of technical entrepreneurship in the UK. Consequently, the exploratory nature of the research prompted an inductive qualitative approach being adopted for the thesis. Through a two stage, multiple-site research approach, an examination was made of technical entrepreneurs heading award-winning technology-based small firms in the UK. The main research questions focused on management within the firm, the novelty and origin of the technology adopted, and the personal characteristics of the entrepreneur under study. The results of this study led to the creation of a specific typology for technical entrepreneurs, based on the individual's role in the development of technology within his previous occupation.

Business implications of manufacturing innovation : the experience of increasing automation in smaller to medium sized companies.

Despite the considerable potential of advanced manufacturing technologies (AMT) for improving the economic performance of many firms, a growing body of literature highlights many instances where realising this potential has proven to be a more difficult task than initially envisaged. Focussing upon the implementation of new manufacturing technologies in several smaller to medium sized enterprises (SME), the research examines the proposition that many of these problems can be attributed in part to inadequate consideration of the integrated nature of such technologies, where the effects of their implementation are not localised, but are felt throughout a business. The criteria for the economic evaluation of such technologies are seen as needing to reflect this, and the research develops an innovative methodology employing micro-computer based spreadsheets, to demonstrate how a series of financial models can be used to quantify the effects of new investments upon overall company performance. Case studies include: the development of a prototype machine based absorption costing system to assist in the evaluation of CNC machine tool purchases in a press making company; the economics and strategy of introducing a flexible manufacturing system for the production of ballscrews; and analysing the progressive introduction of computer based printing presses in a packaging and general print company. Complementary insights are also provided from discussion with the management of several other companies which have experienced technological change. The research was conducted as a collaborative CASE project in the Interdisciplinary Higher Degrees Scheme and was jointly funded by the SERC and Gaydon Technology Limited and later assisted by PE-Inbucon. The findings of the research shows that the introduction of new manufacturing technologies usually requires a fundamental rethink of the existing practices of a business. In particular, its implementation is seen as ideally needing to take place as part of a longer term business and manufacturing strategy, but that short term commercial pressures and limited resources often mean that firms experience difficulty in realising this. The use of a spreadsheet based methodology is shown to be of considerable assistance in evaluating new investments, and is seen as being the limit of sophistication that a smaller business is willing to employ. Several points for effective modelling practice are also given, together with an outline of the context in which a modelling approach is most applicable.

The role of analogy in spelling in English primary school children - a partial intervention study

The English writing system is notoriously irregular in its orthography at the phonemic level. It was therefore proposed that focusing beginner-spellers’ attention on sound-letter relations at the sub-syllabic level might improve spelling performance. This hypothesis was tested in Experiments 1 and 2 using a ‘clue word’ paradigm to investigate the effect of analogy teaching intervention / non-intervention on the spelling performance of an experimental group and controls. The results overall showed the intervention to be effective in improving spelling, and this effect to be enduring. Experiment 3 demonstrated a greater application of analogy in spelling, when clue words, which participants used in analogy to spell test words, remained in view during testing. A series of regression analyses, with spelling entered as the criterion variable and age, analogy and phonological plausibility (PP) as predictors, showed both analogy and PP to be highly predictive of spelling. Experiment 4 showed that children could use analogy to improve their spelling, even without intervention, by comparing their performance in spelling words presented in analogous categories or in random lists. Consideration of children’s patterns of analogy use at different points of development showed three age groups to use similar patterns of analogy, but contrasting analogy patterns for spelling different words. This challenges stage theories of analogy use in literacy. Overall the most salient units used in analogy were the rime and, to a slightly lesser degree, the onset-vowel and vowel. Finally, Experiment 5 showed analogy and phonology to be fairly equally influential in spelling, but analogy to be more influential than phonology in reading. Five separate experiments therefore found analogy to be highly influential in spelling. Experiment 5 also considered the role of memory and attention in literacy attainment. The important implications of this research are that analogy, rather than purely phonics-based strategy, is instrumental in correct spelling in English.

Pharmacy and public health: examining the link between strategy and practice

Despite having been described by the then (2003) Chief Pharmaceutical Officer for England as ·probably the biggest untapped resource for health improvement", the development of the public health function of community pharmacists has been limited. However, devolution of healthcare budgets has led 10 differential rates of development of the public health function in each administration of the UK (England, Scotland, Wales and Northern Ireland). This is measured and reflected upon in this thesis. Two large-scale surveys were conducted, one of key strategic personnel (Directors of Public Health and Chief Pharmacists) in Primary Care Organisations (PCOs) and one of practicing community pharmacists. This research highlights the fact that community pharmacists have developed an individualistic, service-based approach to their engagement with public health that is contrary to the more collective approach adopted by the wider public health movement. The study measures the scope and level of health-improving services through community pharmacy across the UK and shows that the nature of the pharmacy contractor (independent, multiple etc.) may impact on the range and nature of services provided. Survey data also suggest that attitudes towards pharmacy involvement in the public health agenda vary markedly between Directors of Public Health, PCO Chief Pharmacists, and community pharmacists. Furthermore, within the community pharmacist population, attitudes are affected by a wide range of factors including the nature of employment (owner, employee, self-employed) and the type of employing pharmacy (independent, multiple etc.). Implications for policy and areas for further research aimed at maximising the public health function of community pharmacists are suggested.

The development and diffusion of industrial robots

This thesis describes the history of robots and explains the reasons for the international differences in robot diffusion, and the differences in the diffusion of various robot applications with reference to the UK. As opposed to most of the literature, diffusion is examined with an integrated and interdisciplinary perspective. Robot technology evolves from the interaction of development, supply and manufacture, adoption, and promotion. activities. Emphasis is given to the analysis of adoption, at present the most important limiting factor of robot advancement in the UK. Technical development is inferred from a comparison of surveys on equipment, and from the topics of ten years of symposia papers. This classification of papers is also used to highlight the international and institutional differences in robot development. Analysis of the growth in robot supply, manufacture, and use is made from statistics compiled. A series of interviews with users and potential users serves to illustrate the factors and implications of the adoption of different robot systems in the UK. Adoption pioneering takes place when several conditions exist: when the technology is compatible with the firm, when its advantages outweigh its disadvantages, and particularly when a climate exists which encourages the managerial involvement and the labour acceptance. The degree of compatibility (technical, methodological, organisational, and economic) and the consequences (profitability, labour impacts, and managerial effects) of different robot systems (transfer, manipulative, processing, and assembly) are determined by various aspects of manufacturing operations (complexity, automation, integration, labour tasks, and working conditions). The climate for adoption pioneering is basically determined by the performance of firms. The firms' policies on capital investment have as decisive a role in determining the profitability of robots as their total labour costs. The performance of the motor car industry and its machine builders explains, more than any other factor, the present state of robot advancement in the UK.

The control of technological change in the motor industry:a case study

This thesis is based upon a case study of the introduction of automated production technologies at the Longbridge plant of British Leyland in the period 1978 to 1980.The investment in automation was part of an overall programme of modernization to manufacture the new 'Mini Metro' model. In the first Section of the thesis, the different theoretical perspectives on technological change are discussed. Particular emphasis is placed upon the social role of management as the primary controllers of technological change. Their actions are seen to be oriented towards the overall strategy of the firm, integrating the firm's competitive strategy with production methods and techniques.This analysis is grounded in an examination of British Leyland's strategies during the 1970s.. The greater part of the thesis deals with the efforts made by management to secure their strategic objectives in the process of technological change against the conflicting claims of their work-force. Examination of these efforts is linked to the development of industrial relations conflict at Longbridge and in British Leyland as a whole.Emphasis is placed upon the struggle between management in pursuit of their version of efficiency and the trade unions in defence of job controls and demarcations. The thesis concludes that the process of technological change in the motor industry is controlled by social forces,with the introduction of new technologies being closely intertwined with management!s political relations with the trade unions.

Towards an operations strategy for the infusion of product-centric services into manufacturing:service systems implementation

The work in this chapter is concerned with product-centric servitization. This is where a portfolio of services are formed and integrated to support product availability and use. Such servitization can be a valuable source of revenue for a manufacturer, yet little attention has been given to the configuration of the wider operations strategy that needs to be in place to deliver integrated products and services successfully. Therefore, the purpose of this chapter is to put forward a generic set of characteristics for such operations. Our intention is that these characteristics will be valuable to practitioners contemplating sophisticated forms of servitization, as they suggest the likely and significant changes that will be needed to the operations strategy of a conventional manufacturing organisation.

A strategic activity model of Enterprise System implementation and use:scaffolding fluidity

This paper builds on a Strategic Activity Framework (Jarzabkowski, 2005) and activity based theories of development (Vygotsky, 1978) to model how Enterprise Systems are used to support emerging strategy. It makes three contributions. Firstly, it links fluidity and extensiveness of system use to patterns of strategising. Fluidity - the ability to change system use as needs change - is supported by interactive strategising, where top managers communicate directly with the organisation. Extensiveness requires procedural strategising, embedding system use in structures and routines. Secondly, it relates interactive and procedural strategising to the importance of the system - procedural strategising is more likely to occur if the system is strategically important. Thirdly, using a scaffolding metaphor it identifies patterns in the activities of top managers and Enterprise System custodians, who identify process champions within the organisational community, orient them towards system goals, provide guided support, and encourage fluidity through pacing implementation with learning.© 2013 Published by Elsevier B.V. All rights reserved.

Reluctant donors? The Europeanization of international development policies in the New Member States

The European Union (EU) played an instrumental role in re-starting the international development policies in central and eastern European Member States, but questions remain about how far this policy area has been Europeanized since accession. Focusing on the Czech Republic, Hungary, Poland and Slovakia, this article investigates why the new donors have been reluctant to adopt the EU's development acquis more fully. The article traces the socialization processes offered by the EU's development policy rule-making and subsequent national rule implementation. The conclusions reveal three reasons why socialization has been weak: perceptions among the new Member States on the procedural legitimacy of the development acquis; low domestic resonance with the development acquis; and inconsistencies in the activities of norm entrepreneurs. The article contributes to our understanding of development policy in the EU – particularly how decision-making takes place within the Council and its working groups post-enlargement.