Relación triangular en danza movimiento terapia: "cuando el instante no es efímero"

Esta tesina pretende investigar si el concepto de relación triangular existe y es apto para el campo de la Danza Movimiento Terapia. Para lograr esto nos basaremos en una correlación teórica con el campo de la arte terapia, donde la relación triangular se utiliza como herramienta de trabajo terapéutico. Nuestro fin es encontrar resultados teórico/prácticos, que permitan visualizar su existencia y nos muestren lo que sucede en la relación terapéutica, cuando dicho término se consolida. En este camino, la materialización de la danza/movimiento, como tercer elemento de la relación triangular, será un punto clave e interesante, que nos mostrará nuevos caminos psicoterapéuticos.

Formação e trabalho de mestres e doutores em química titulados no Brasil

This article reports questions related to the training and jobs of chemistry graduates from Brazilian universities. It is focussed on academic and career paths and on relations between knowledge and work. The main questions addressed in this study were: what have been the paths since undergraduate education? what were graduates doing before their enrolment in master and doctoral programs? Which were their motivations for this? Where do graduates work now? How do they appraise some aspects of their graduate education? Did the degree enlarge their job opportunities and improve work quality? How much do they earn?

Formação e trabalho de mestres e doutores em bioquímica titulados no brasil

This article reports questions related to the training and jobs of biochemistry graduates from Brazilian universities. It is focussed on academic and career paths and on relations between knowledge and work. The main questions addressed in this study were: what have been the paths since undergraduate education? What were graduates doing before their enrolment in master and doctoral programs? Which were their motivations for this? Where do graduates work now? How do they appraise some aspects of their graduate education? Did the degree enlarge their job opportunities and improve work quality? How much do they earn?

Development of power flows around Baltic countries with new grid links

In the Thesis main focus is done on power flow development paths around the Baltic States as well as on market-based requirements for creation of the common Baltic electricity market. Current market regulations between the countries are presented; barriers for creating competitive common Baltic power market and for electricity trading with third countries are clarified; solutions are offered and corresponding road map is developed. Future power development paths around the Baltic States are analysed. For this purpose the 330 kV transmission grid of Estonia, Latvia and Lithuania is modelled in a power flow tool. Power flow calculations are carried out for winter and summer peak and off-peak load periods in 2020 with different combinations of interconnections. While carrying out power balance experiments several power flow patterns in the Baltic States are revealed. Conclusions are made about security of supply, grid congestion and transmission capacity availability for different scenarios.

Searching for consensus in ahp-group decision making. A bayesian perspective

This paper sets out to identify the initial positions of the different decisionmakers who intervene in a group decision making process with a reducednumber of actors, and to establish possible consensus paths between theseactors. As a methodological support, it employs one of the most widely-knownmulticriteria decision techniques, namely, the Analytic Hierarchy Process(AHP). Assuming that the judgements elicited by the decision makers follow theso-called multiplicative model (Crawford and Williams, 1985; Altuzarra et al.,1997; Laininen and Hämäläinen, 2003) with log-normal errors and unknownvariance, a Bayesian approach is used in the estimation of the relative prioritiesof the alternatives being compared. These priorities, estimated by way of themedian of the posterior distribution and normalised in a distributive manner(priorities add up to one), are a clear example of compositional data that will beused in the search for consensus between the actors involved in the resolution ofthe problem through the use of Multidimensional Scaling tools

Metodología del entrenamiento de la resistencia específica en el tenis de competición. Revisión y propuesta

El principal objetivo del entrenamiento de la resistencia en el jugador de tenis de competición es mejorar la habilidad para realizar ejercicios de alta intensidad de manera repetida, recuperarse rápidamente de los esfuerzos y mantener dicha intensidad durante el juego, evitando o retardando de esta manera la aparición de la fatiga. Para el desarrollo de los sistemas energéticos específicos, el jugador debe dirigir los entrenamientos al desarrollo de las vías energéticas y patrones de movimiento que predominan en la competición, respetando en la medida de lo posible la naturaleza intermitente del deporte y la participación muscular específica. El entrenamiento intermitente (EI) es un método adecuado y mejora el nivel de especificidad en relación a los métodos continuos o interválicos largos utilizados tradicionalmente y puede realizarse en la pista de tenis mediante ejercicios específicos. Es importante controlar adecuadamente los parámetros de carga del EI para dirigir adecuadamente las adaptaciones fisiológicas y efectos del entrenamiento a las necesidades del deporte. El objetivo de este trabajo es realizar una revisión sobre los principales aspectos fisiológicos y parámetros específicos de carga necesarios para una orientación específica del EI para el tenis y proponer un modelo de variabilidad de dichos parámetros de carga en un entorno específico de entrenamiento.

Influence of sea surface winds on shearwater migration detours

To test the potential effects of winds on the migratory detours of shearwaters, transequatorial migrations of 3 shearwaters, the Manx Puffinus puffinus, the Cory"s Calonectris diomedea, and the Cape Verde C. edwardsii shearwaters were tracked using geolocators. Concurrent data on the direction and strength of winds were obtained from the NASA SeaWinds scatterometer to calculate daily impedance models reflecting the resistance of sea surface winds to the shearwater movements. From these models we estimated relative wind-mediated costs for the observed synthesis pathway obtained from tracked birds, for the shortest distance pathway and for other simulated alternative pathways for every day of the migration period. We also estimated daily trajectories of the minimum cost pathway and compared distance and relative costs of all pathways. Shearwaters followed 26 to 52% longer pathways than the shortest distance path. In general, estimated wind-mediated costs of both observed synthesis and simulated alternative pathways were strongly dependent on the date of departure. Costs of observed synthesis pathways were about 15% greater than the synthesis pathway with the minimum cost, but, in the Cory"s and the Cape Verde shearwaters, these pathways were on average 15 to 20% shorter in distance, suggesting the extra costs of the observed pathways are compensated by saving about 2 travelling days. In Manx shearwaters, however, the distance of the observed synthesis pathway was 25% longer than that of the lowest cost synthesis pathway, probably because birds avoided shorter but potentially more turbulent pathways. Our results suggest that winds are a major determinant of the migratory routes of seabirds.

Hybrid LC Filter for Power Electronic Drives: Theory and Implementation

Power electronic converter drives use, for the sake of high efficiency, pulse-width modulation that results in sequences of high-voltage high-frequency steep-edged pulses. Such a signal contains a set of high harmonics not required for control purposes. Harmonics cause reflections in the cable between the motor and the inverter leading to faster winding insulation ageing. Bearing failures and problems with electromagnetic compatibility may also result. Electrical du/dt filters provide an effective solution to problems caused by pulse-width modulation, thereby increasing the performance and service life of the electrical machines. It is shown that RLC filters effectively decrease the reflection phenomena in the cable. Improved (simple, but effective) solutions are found for both differential- and common-mode signals; these solutions use a galvanic connection between the RLC filter star point and the converter DC link. Foil chokes and film capacitors are among the most widely used components in high-power applications. In actual applications they can be placed in different parts of the cabinet. This fact complicates the arrangement of the cabinet and decreases the reliability of the system. In addition, the inductances of connection wires may prevent filtration at high frequencies. This thesis introduces a new hybrid LC filter that uses a natural capacitance between the turns of the foil choke based on integration of an auxiliary layer into it. The main idea of the hybrid LC filter results from the fact that both the foil choke and the film capacitors have the same roll structure. Moreover, the capacitance between the turns (“intra capacitance”) of the foil inductors is the reason for the deterioration of their properties at high frequencies. It is shown that the proposed filter has a natural cancellation of the intra capacitance. A hybrid LC filter may contain two or more foil layers isolated from each other and coiled on a core. The core material can be iron or even air as in the filter considered in this work. One of the foils, called the main foil, can be placed between the inverter and the motor cable. Other ones, called auxiliary foils, may be connected in star to create differential-mode noise paths, and then coupled to the DC link midpoint to guarantee a traveling path, especially for the common-mode currents. This way, there is a remarkable capacitance between the main foil and the auxiliary foil. Investigations showed that such a system can be described by a simple equivalent LC filter in a wide range of frequencies. Because of its simple hybrid construction, the proposed LC filter can be a cost-effective and competitive solution for modern power drives. In the thesis, the application field of the proposed filter is considered and determined. The basics of hybrid LC filter design are developed further. High-frequency behaviour of the proposed filter is analysed by simulations. Finally, the thesis presents experimental data proving that the hybrid LC filter can be used for du/dt of PWM pulses and reduction of common-mode currents.

Tracing the Origin and Spread of Agriculture in Europe

The origins of early farming and its spread to Europe have been the subject of major interest for some time. The main controversy today is over the nature of the Neolithic transition in Europe: the extent to which the spread was, for the most part, indigenous and animated by imitatio (cultural diffusion) or else was driven by an influx of dispersing populations (demic diffusion). We analyze the spatiotemporal dynamics of the transition using radiocarbon dates from 735 early Neolithic sites in Europe, the Near East, and Anatolia. We compute great-circle and shortest-path distances from each site to 35 possible agricultural centers of origin—ten are based on early sites in the Middle East and 25 arehypothetical locations set at 58 latitude/longitude intervals. We perform a linear fit of distance versus age (and viceversa) for each center. For certain centers, high correlation coefficients (R . 0.8) are obtained. This implies that a steady rate or speed is a good overall approximation for this historical development. The average rate of the Neolithic spread over Europe is 0.6–1.3 km/y (95% confidence interval). This is consistent with the prediction of demic diffusion(0.6–1.1 km/y). An interpolative map of correlation coefficients, obtained by using shortest-path distances, shows thatthe origins of agriculture were most likely to have occurred in the northern Levantine/Mesopotamian area

The determinants of capital intensity in Japan and the U.S

We estimate the determinants of capital intensity in Japan and the US, characterized by striking different paths. We augment an otherwise standard Constant Elasticity of Substitution (CES) model with demand-side considerations, which we find especially relevant in the US. In this augmented setting, the elasticity of substitution between capital and labor is placed around 0.85 in Japan, and 0.30 in the US. We also find evidence of biased technical change, which is capital-saving in Japan but labor-saving in the US. These differences help us explain the diverse experience in the capital deepening process of these economies, and lead us to conclude that demand-side drivers may also be relevant to account for different growth experiences. A close look at the nature of technological change is also needed before designing one-size-fits-all industrial, economic growth, and/or labor market policies.

Decomposição térmica de espumas de poliuretano para fabricação de vitrocerâmica celular de Li2O-ZrO2-SiO2-Al2O3 (LZSA)

Characterization of the thermal decomposition of polyurethane (PUR) foams was performed by Fourier-transformed infrared (FT-IR) spectroscopy and thermogravimetric analysis (TGA). Three main weight loss paths were observed by TGA, the residue being lower than 3 wt.% for 3 different PUR foams analyzed. FT-IR spectra indicated CO2, CO, NH3 and isocyanides as main decomposition products. PUR foams of different cell sizes were immersed in a slurry of the parent glass ceramic of composition Li2O-ZrO2-SiO2-Al 2O3 (LZSA) and submitted to heat treatment. The LZSA cellular glass ceramics obtained after sintering and crystallization resembled the original morphology of the PUR foams.

Control d'un sistema de marcatge làser de caixes

Avui en dia, l’alta competitivitat que existeix al mercat, fa que les empreses hagin d’esprémer al màxim les seves possibilitats per no quedar-se enrere. Un dels processos en que aquest fet hi és més present és el productiu. L’empresa JCM Technologies també engloba aquest camp i és en un dels seus processos productius on aquest projecte pren part. L’objectiu d’aquest projecte final de carrera ha estat desenvolupar un sistema per poder marcar caixes mitjançant un làser de CO2 i un automatisme manipulador de caixes. D’aquesta manera aquest procés productiu té una durada molt inferior a l’antic procés, que consistia en enganxar una etiqueta al lloc on ara és marcat pel làser. Per satisfer els objectius, s’ha creat una aplicació de Windows que per mitjà d’una interfície gràfica, permet a l’usuari realitzar els passos necessaris per fer el marcatge. Primerament es recullen les dades procedents de la comanda; seguidament es seleccionen les que s’han de marcar a les caixes i s’envien al làser mitjançant comunicació sèrie; una vegada aquesta inicialització ha finalitzat correctament, s’engega la seqüència de marcatge de les caixes, que en marcarà la quantitat indicada. Aquest procés de marcatge consisteix en supervisar l’estat en que es troben certes senyals, procedents de l’automatisme i del làser, i depenent d’aquestes generar-ne unes altres. Aconseguint així realitzar el procés de marcatge de cada caixa. Com a conclusions cal dir, que els objectius s’han complert, ja que s’ha aconseguit un procés de marcatge ràpid i robust. També s’ha aconseguit que les parts de configuració de l’aplicació, i de les caixes siguin de fàcil manipulació. Per tant, amb l’acompliment dels objectius d’aquest projecte, aconseguim completar el sistema de marcatge, i permetre que les caixes siguin marcades de forma correcta, ràpida i eficient.

Veus ignorades: representacions socials, subjectivitat i resiliència en persones grans amb pèrdua d’autonomia funcional

Els processos per a l’aprovació i la implementació de la Llei per a l’Autonomia personal i l’Atenció a les Persones en situació de Dependència (LAPAD) han donat lloc a un intens debat polític i social que, coincidint també amb les millores en la provisió de serveis i els avenços mèdics, ha contribuït a un procés de classificació i d’etiquetatge basats en els dèficits de les persones que es troben en aquestes circumstàncies. Aquesta visió anul·la el subjecte i la seva experiència singular i condiciona l’abordatge dels models d’atenció i de cura. L’estudi pretén fer una aproximació a les persones grans amb pèrdua d’autonomia funcional, fent emergir les seves veus, que expressen com perceben, interpreten, afronten i es reajusten a la nova situació. Partint d’un enfocament constructivista, basat en la subjectivitat, es fa un recorregut sobre els models de la discapacitat que han reeixit en l’activitat científica dels darrers anys, els mecanismes de regulació de les pèrdues que defensen les teories del cicle vital i les aportacions que s’han fet sobre el model de la resiliència aplicat a les persones que envelleixen. El resultats de l’estudi mostren com les representacions i els significats que les persones grans atribueixen a la seva experiència s’inscriuen en les seves trajectòries vitals, donant un sentit únic i singular a la forma de viure i de respondre a la pèrdua d’autonomia funcional i les seves conseqüències. Aquelles que expressen una vivència d’integritat respecte de la vida viscuda, amb predomini d’afectes positius envers un mateix i els altres, que conserven l’esperança i el desig de continuar vivint, s’ajusten a les pèrdues de manera més satisfactòria que aquelles que expressen desconfiança i una certa amargor respecte de la pròpia vida. D’això se’n deriva que els espais d’escolta i d’acompanyament poden ser un recurs vàlid i necessari en el qual, a través de la paraula i el testimoni narrat, el subjecte pugui repensar i resignificar les seves experiències.

Engendering Group Support Based Foresight for Capital Intensive Manufacturing Industries - Case Paper and Steel Industry Scenarios by 2018

In recent times of global turmoil, the need for uncertainty management has become ever momentous. The need for enhanced foresight especially concerns capital-intensive industries, which need to commit their resources and assets with long-term planning horizons. Scenario planning has been acknowledged to have many virtues - and limitations - concerning the mapping of the future and illustrating the alternative development paths. The present study has been initiated to address both the need of improved foresight in two capital-intensive industries, i.e. the paper and steel industries and the imperfections in the current scenario practice. The research problem has been approached by engendering a problem-solving vehicle, which combines, e.g. elements of generic scenario process, face-to-face group support methods, deductive scenario reasoning and causal mapping into a fully integrated scenario process. The process, called the SAGES scenario framework, has been empirically tested by creating alternative futures for two capital-intensive industries, i.e. the paper and steel industries. Three scenarios for each industry have been engendered together with the identification of the key megatrends, the most important foreign investment determinants, key future drivers and leading indicators for the materialisation of the scenarios. The empirical results revealed a two-fold outlook for the paper industry, while the steel industry future was seen as much more positive. The research found support for utilising group support systems in scenario and strategic planning context with some limitations. Key perceived benefits include high time-efficiency, productivity and lower resource-intensiveness. Group support also seems to enhance participant satisfaction, encourage innovative thinking and provide the users with personalised qualitative scenarios.

Estudio teórico de la isomerización del ácido maleico en ácido fumárico: un enfoque basado en el concepto de superficie de energía potencial

A comparative study based on potential energy surfaces (PES) of 2-butanedioic and hypothetic 2-butanedioic/HCl acids is useful for understanding the maleic acid isomerization. The PES enables locating conformers of minimum energy, intermediates of reactions and transition states. From contour diagrams, a set of possible reaction paths are depicted interconnecting the proposed structures. The study was carried out in absentia and in the presence of the catalyst (HCl), using an solvatation model provided by the Gaussian software package. Clearly, the effect of HCl is given by new reaction paths with lower energetic barriers in relation to the reaction without catalyzing.