Relevance of in vitro tests of adhesive and composite dental materials, a review in 3 parts. Part 1: Approval requirements and standardized testing of composite materials according to ISO specifications

The first part of this three-part review on the relevance of laboratory testing of composites and adhesives deals with approval requirements for composite materials. We compare the in vivo and in vitro literature data and discuss the relevance of in vitro analyses. The standardized ISO protocols are presented, with a focus on the evaluation of physical parameters. These tests all have a standardized protocol that describes the entire test set-up. The tests analyse flexural strength, depth of cure, susceptibility to ambient light, color stability, water sorption and solubility, and radiopacity. Some tests have a clinical correlation. A high flexural strength, for instance, decreases the risk of fractures of the marginal ridge in posterior restorations and incisal edge build-ups of restored anterior teeth. Other tests do not have a clinical correlation or the threshold values are too low, which results in an approval of materials that show inferior clinical properties (e.g., radiopacity). It is advantageous to know the test set-ups and the ideal threshold values to correctly interpret the material data. Overall, however, laboratory assessment alone cannot ensure the clinical success of a product.

Teat anatomy affects requirements for udder preparation in Mediterranean buffaloes

The present study was conducted to assess the interrelation between teat anatomy and machine milking in dairy buffaloes raised in Switzerland. A 3-min pre-stimulation induced milk ejection before cluster attachment in most cases and caused an optimal milk removal during machine milking. In an additional experiment, longitudinal cross-section ultrasound was obtained before and after a 3-min pre-stimulation. Teat wall thickness, teat diameter, cisternal diameter and teat canal length were evaluated. It was observed that 3-min pre-stimulation dramatically reduced teat canal length whereas all the other anatomical parameters remained unchanged. The vacuum needed to open the teat canal was also measured before and after a 3-min pre-stimulation by using a special teat cup with only the mouthpiece of the liner remaining on the top of the teat cup (no liner, no pulsation). Without pre-stimulation but after wetting the teat canal by stripping one squirt of milk out of the teat, no milk could be withdrawn with a vacuum up to 39 kPa. However, after pre-stimulation, milk flow occurred in all buffaloes at a vacuum between 16 and 38 kPa. In the last experiment, the teat tissue was examined in slaughtered buffaloes and compared with teat tissue of cows. No difference was noted in histological sections and teat canal length was similar in cows and buffaloes. Proximal to the teat canal, the teat did not pass into an open cistern but the lumen was collapsed. In conclusion, buffaloes need to be well pre-stimulated because the tissue above the teat canal provides additional teat closure before milk ejection. Therefore, milk can only be obtained after pre-stimulation.

Development of a model-based transient calibration process for diesel engine electronic control module tables – Part 1: data requirements, processing, and analysis

This is the first part of a study investigating a model-based transient calibration process for diesel engines. The motivation is to populate hundreds of parameters (which can be calibrated) in a methodical and optimum manner by using model-based optimization in conjunction with the manual process so that, relative to the manual process used by itself, a significant improvement in transient emissions and fuel consumption and a sizable reduction in calibration time and test cell requirements is achieved. Empirical transient modelling and optimization has been addressed in the second part of this work, while the required data for model training and generalization are the focus of the current work. Transient and steady-state data from a turbocharged multicylinder diesel engine have been examined from a model training perspective. A single-cylinder engine with external air-handling has been used to expand the steady-state data to encompass transient parameter space. Based on comparative model performance and differences in the non-parametric space, primarily driven by a high engine difference between exhaust and intake manifold pressures (ΔP) during transients, it has been recommended that transient emission models should be trained with transient training data. It has been shown that electronic control module (ECM) estimates of transient charge flow and the exhaust gas recirculation (EGR) fraction cannot be accurate at the high engine ΔP frequently encountered during transient operation, and that such estimates do not account for cylinder-to-cylinder variation. The effects of high engine ΔP must therefore be incorporated empirically by using transient data generated from a spectrum of transient calibrations. Specific recommendations on how to choose such calibrations, how many data to acquire, and how to specify transient segments for data acquisition have been made. Methods to process transient data to account for transport delays and sensor lags have been developed. The processed data have then been visualized using statistical means to understand transient emission formation. Two modes of transient opacity formation have been observed and described. The first mode is driven by high engine ΔP and low fresh air flowrates, while the second mode is driven by high engine ΔP and high EGR flowrates. The EGR fraction is inaccurately estimated at both modes, while EGR distribution has been shown to be present but unaccounted for by the ECM. The two modes and associated phenomena are essential to understanding why transient emission models are calibration dependent and furthermore how to choose training data that will result in good model generalization.

Response to the Discussion of "The Effect on Financial Reporting Quality of an Exemption From the SEC Reporting Requirements for Foreign Private Issuers"

We appreciate the thorough discussion provided by Professor Yuan Ding. His comments raise legitimate issues. In this response, we offer clarifications and suggest avenues for future research. Our response follows the structure of the discussant’s paper and elaborates on each point separately.

The Effect on Financial Reporting Quality of an Exemption From the SEC Reporting Requirements for Foreign Private Issuers

We test for differences in financial reporting quality between companies that are required to file periodically with the SEC and those that are exempted from filing reports with the SEC under Rule 12g3-2(b). We examine three earnings quality measures: conservatism, abnormal accruals, and the predictability of earnings. Our results, for all three measures, show different financial reporting quality for companies that file with the SEC than for companies exempt from filing requirements. This paper provides empirical evidence of a link between filing with the SEC and financial reporting quality for foreign firms.

Detrital Zircon Evidence for Non-Laurentian Provenance, Mesoproterozoic (ca. 1490-1450 Ma) Deposition and Orogenesis in a Reconstructed Orogenic Belt, Northern New Mexico, USA: Defining the Picuris Orogeny

Detrital zircon and igneous zircon U-Pb ages are reported from Proterozoic metamorphic rocks in northern New Mexico. These data give new insight into the provenance and depositional age of a >3-km-thick metasedimentary succession and help resolve the timing of orogenesis within an area of overlapping accretionary orogens and thermal events related to the Proterozoic tectonic evolution of southwest Laurentia. Three samples from the Paleoproterozoic Vadito Group yield narrow, unimodal detrital zircon age spectra with peak ages near 1710 Ma. Igneous rocks that intrude the Vadito Group include the Cerro Alto metadacite, the Picuris Pueblo granite, and the Penasco quartz monzonite and yield crystallization ages of 1710 +/- 10 Ma, 1699 +/- 3 Ma, and 1450 +/- 10 Ma, respectively. Within the overlying Hondo Group, a metamorphosed tuff layer from the Pilar Formation yields an age of 1488 +/- 6 Ma and represents the first direct depositional age constraint on any part of the Proterozoic metasedimentary succession in northern New Mexico. Detrital zircon from the overlying Piedra Lumbre Formation yield a minimum age peak of 1475 Ma, and similar to 60 grains (similar to 25%) yield ages between 1500 Ma and 1600 Ma, possibly representing non-Laurentian detritus originating from Australia and/or Antarctica. Detrital zircons from the basal metaconglomerate and the middle quartzite member of the Marquenas Formation yield minimum age peaks of 1472 Ma and 1471 Ma, consistent with earlier results. We interpret the onset of ca. 1490-1450 Ma deposition followed by tectonic burial, regional Al2SiO5 triple-point metamorphism, and ductile deformation at depths of 12-18 km to reflect a Mesoproterozoic contractional orogenic event, possibly related to the final suturing of the Mazatzal crustal province to the southern margin of Laurentia. We propose to call this event the Picuris orogeny.

Complicating the Local: Defining the Aymara at Tiwanaku, Bolivia

The archaeological site of Tiwanaku, Bolivia, is commonly held to be the "Spiritual Capital of the Aymara People." But negotiating who qualifies as Aymara, and in what contexts, is decidedly more complicated. Local political divisions between residents of the village of Tiahuanacu (who are seen locally as less-Aymara but not as not-Aymara) and residents of the surrounding rural communities (who are considered to be unquestionably Aymara) structure discussions about who has the right to earn income at the Tiwanaku archaeological site, who manages major public events, and who is responsible for the site's maintenance and security. The situation is complicated further by national-level events such as the Winter Solstice, where urban Aymara travel to Tiwanaku to seek their roots, and Bolivian Presidents and politicians come to participate in national Aymara "culture." I focus on the intervencin ("Intervention") that took place in Tiahuanacu in August 2000, which resulted in the transfer of management of the Tiwanaku archaeological site from the Bolivian state to local municipal and indigenous authorities. Heritage researchers should take such local divisions into account, rather than assuming that "locals" are politically unified or easily delineated by geographical boundaries.

Population-based analysis of 4113 patients with acute cholecystitis: defining the optimal time-point for laparoscopic cholecystectomy

Objective: To compare clinical outcomes after laparoscopic cholecystectomy (LC) for acute cholecystitis performed at various time-points after hospital admission. Background: Symptomatic gallstones represent an important public health problem with LC the treatment of choice. LC is increasingly offered for acute cholecystitis, however, the optimal time-point for LC in this setting remains a matter of debate. Methods: Analysis was based on the prospective database of the Swiss Association of Laparoscopic and Thoracoscopic Surgery and included patients undergoing emergency LC for acute cholecystitis between 1995 and 2006, grouped according to the time-points of LC since hospital admission (admission day (d0), d1, d2, d3, d4/5, d ≥6). Linear and generalized linear regression models assessed the effect of timing of LC on intra- or postoperative complications, conversion and reoperation rates and length of postoperative hospital stay. Results: Of 4113 patients, 52.8% were female, median age was 59.8 years. Delaying LC resulted in significantly higher conversion rates (from 11.9% at d0 to 27.9% at d ≥6 days after admission, P < 0.001), surgical postoperative complications (5.7% to 13%, P < 0.001) and re-operation rates (0.9% to 3%, P = 0.007), with a significantly longer postoperative hospital stay (P < 0.001). Conclusions: Delaying LC for acute cholecystitis has no advantages, resulting in significantly increased conversion/re-operation rate, postoperative complications and longer postoperative hospital stay. This investigation—one of the largest in the literature—provides compelling evidence that acute cholecystitis merits surgery within 48 hours of hospital admission if impact on the patient and health care system is to be minimized.