Distributed cognitive radio systems with temperature-interference constraints and overlay scheme

Cognitive radio represents a promising paradigm to further increase transmission rates in wireless networks, as well as to facilitate the deployment of self-organized networks such as femtocells. Within this framework, secondary users (SU) may exploit the channel under the premise to maintain the quality of service (QoS) on primary users (PU) above a certain level. To achieve this goal, we present a noncooperative game where SU maximize their transmission rates, and may act as well as relays of the PU in order to hold their perceived QoS above the given threshold. In the paper, we analyze the properties of the game within the theory of variational inequalities, and provide an algorithm that converges to one Nash Equilibrium of the game. Finally, we present some simulations and compare the algorithm with another method that does not consider SU acting as relays.

Simulación del enlace descendente LTE orientada a planificación radio

En este Proyecto de Fin de Carrera se describe la implementación de un simulador del enlace descendente de un sistema LTE. Dicho simulador es capaz de modelar con precisión las variaciones rápidas del canal, que se producen debido al efecto del multitrayecto. Esto es vital a la hora de simular adecuadamente las ganancias que se logran debido a la planificación dependiente del canal que el sistema LTE es capaz de realizar. El objetivo es investigar la relación existente entre la tasa de datos binaria obtenida por una estación base y diferentes parámetros de los usuarios (como SINR o velocidad). El objetivo final del proyecto es obtener un modelo que pueda predecir la tasa binaria de la base como una función de algunos parámetros que caractericen las condiciones de los usuarios. Se ha utilizado principalmente un planificador de tipo “proportional fair” debido a sus cualidades para para obtener una tasa binaria razonablemente elevada a la vez que reparte el canal entre todos los usuarios existentes de forma equitativa.

Despliegue de una red de acceso radio en comunicaciones móviles

En el mundo actual el uso de la telefonía móvil ha desbancado a la telefonía fija, creando la necesidad en los usuarios de estar conectados independientemente del lugar en el que se encuentren. Esto provoca que las compañías telefónicas estén cada vez más preocupadas por mejorar y renovar sus redes de comunicaciones para proporcionar sus servicios con cada vez mayor calidad. En este proyecto se estudiara la forma en la que un gran operador mantiene su red actualizada y se detallaran los trabajos necesarios para que su red se mantenga actualizada y no se encuentren equipos obsoletos dentro de su arquitectura. Se describirá el procedimiento mediante el cual una operadora de telefonía móvil ha llevado a cabo la renovación de los equipos de su red de acceso. A lo largo del proyecto se describirán los diferentes tipos de escenarios y las distintas soluciones adoptadas a implementar en dichos escenarios. De la misma forma se describirá el tipo de equipo instalado, indicando las diferentes tarjetas que lo forman y sus diferentes funcionalidades. Se describirán las acciones llevadas a cabo por el grupo de O&M de integración mediante las cuales se retirara el equipo antiguo y se instalara el nuevo impactando lo menos posible en la red del operador. ABSTRACT. In today's world the use of mobile phones has replaced fixed lines, creating the need for users to stay connected no matter where they are located. This causes the phone companies are increasingly concerned with improving and renovating their communications networks to provide services with increasing quality. In this project the way in which a large network operator maintains their network updated and detailing the work required to keep it updated and with no obsolete equipment in its architecture are be considered. The process by which a mobile operator has undertaken the renovation of the computers on your network access will be described. Throughout the project the different types of scenarios and different solutions adopted to implement these scenarios are described. Likewise the type of installed equipment is also described, indicating the different cards that form it and its various functions. Actions carried out by the group of O & M of integration by which the old equipment is retired and the new install as little as possible impact on the operator's network will be described.

Telemetría de vehículos FSAE con microcontrolador PIC32 y transceptor de radio CC1101

Quizás el campo de las telecomunicaciones sea uno de los campos en el que más se ha progresado en este último siglo y medio, con la ayuda de otros campos de la ciencia y la técnica tales como la computación, la física electrónica, y un gran número de disciplinas, que se han utilizado estos últimos 150 años en conjunción para mejorarse unas con la ayuda de otras. Por ejemplo, la química ayuda a comprender y mejorar campos como la medicina, que también a su vez se ve mejorada por los progresos en la electrónica creados por los físicos y químicos, que poseen herramientas más potentes para calcular y simular debido a los progresos computacionales. Otro de los campos que ha sufrido un gran avance en este último siglo es el de la automoción, aunque estancados en el motor de combustión, los vehículos han sufrido enormes cambios debido a la irrupción de los avances en la electrónica del automóvil con multitud de sistemas ya ampliamente integrados en los vehículos actuales. La Formula SAE® o Formula Student es una competición de diseño, organizada por la SAE International (Society of Automotive Engineers) para estudiantes de universidades de todo el mundo que promueve la ingeniería a través de una competición donde los miembros del equipo diseñan, construyen, desarrollan y compiten en un pequeño y potente monoplaza. En el ámbito educativo, evitando el sistema tradicional de clases magistrales, se introducen cambios en las metodologías de enseñanza y surge el proyecto de la Fórmula Student para lograr una mejora en las acciones formativas, que permitan ir incorporando nuevos objetivos y diseñar nuevas situaciones de aprendizaje que supongan una oportunidad para el desarrollo de competencias de los alumnos, mejorar su formación como ingenieros y contrastar sus progresos compitiendo con las mejores universidades del mundo. En este proyecto se pretende dotar a los alumnos de las escuelas de ingeniería de la UPM que desarrollan el vehículo de FSAE de una herramienta de telemetría con la que evaluar y probar comportamiento del vehículo de FSAE junto con sus subsistemas que ellos mismos diseñan, con el objetivo de evaluar el comportamiento, introducir mejoras, analizar resultados de una manera más rápida y cómoda, con el objetivo de poder progresar más rápidamente en su desarrollo, recibiendo y almacenando una realimentación directa e instantánea del funcionamiento mediante la lectura de los datos que circulan por el bus CAN del vehículo. También ofrece la posibilidad de inyectar datos a los sistemas conectados al bus CAN de manera remota. Se engloba en el conjunto de proyectos de la FSAE, más concretamente en los basados en la plataforma PIC32 y propone una solución conjunta con otros proyectos o también por sí sola. Para la ejecución del proyecto se fabricó una placa compuesta de dos placas de circuito impreso, la de la estación base que envía comandos, instrucciones y datos para inyectar en el bus CAN del vehículo mediante radiofrecuencia y la placa que incorpora el vehículo que envía las tramas que circulan por el bus CAN del vehículo con los identificadores deseados, ejecuta los comandos recibidos por radiofrecuencia y salva las tramas CAN en una memoria USB o SD Card. Las dos PCBs constituyen el hardware del proyecto. El software se compone de dos programas. Un programa para la PCB del vehículo que emite los datos a la estación base, codificado en lenguaje C con ayuda del entorno de desarrollo MPLAB de Microchip. El otro programa hecho con LabView para la PCB de la estación base que recibe los datos provenientes del vehículo y los interpreta. Se propone un hardware y una capa o funciones de software para los microcontroladores PIC32 (similar al de otros proyectos del FSAE) para la transmisión de las tramas del bus CAN del vehículo de manera inalámbrica a una estación base, capaz de insertar tramas en el bus CAN del vehículo enviadas desde la estación base. También almacena estas tramas CAN en un dispositivo USB o SD Card situado en el vehículo. Para la transmisión de los datos se hizo un estudio de las frecuencias de transmisión, la legislación aplicable y los tipos de transceptores. Se optó por utilizar la banda de radiofrecuencia de uso común ISM de 433MHz mediante el transceptor integrado CC110L de Texas Instruments altamente configurable y con interfaz SPI. Se adquirieron dos parejas de módulos compatibles, con amplificador de potencia o sin él. LabView controla la estación que recoge las tramas CAN vía RF y está dotada del mismo transceptor de radio junto con un puente de comunicaciones SPI-USB, al que se puede acceder de dos diferentes maneras, mediante librerías dll, o mediante NI-VISA con transferencias RAW-USB. La aplicación desarrollada posee una interfaz configurable por el usuario para la muestra de los futuros sensores o actuadores que se incorporen en el vehículo y es capaz de interpretar las tramas CAN, mostrarlas, gráfica, numéricamente y almacenar esta información, como si fuera el cuadro de instrumentos del vehículo. Existe una limitación de la velocidad global del sistema en forma de cuello de botella que se crea debido a las limitaciones del transceptor CC110L por lo que si no se desea filtrar los datos que se crean necesarios, sería necesario aumentar el número de canales de radio para altas ocupaciones del bus CAN. Debido a la pérdida de relaciones con el INSIA, no se pudo probar de manera real en el propio vehículo, pero se hicieron pruebas satisfactorias (hasta 1,6 km) con una configuración de tramas CAN estándar a una velocidad de transmisión de 1 Mbit/s y un tiempo de bit de 1 microsegundo. El periférico CAN del PIC32 se programará para cumplir con estas especificaciones de la ECU del vehículo, que se presupone que es la MS3 Sport de Bosch, de la que LabView interpretará las tramas CAN recibidas de manera inalámbrica. Para poder probar el sistema, ha sido necesario reutilizar el hardware y adaptar el software del primer prototipo creado, que emite tramas CAN preprogramadas con una latencia también programable y que simulará al bus CAN proporcionando los datos a transmitir por el sistema que incorpora el vehículo. Durante el desarrollo de este proyecto, en las etapas finales, el fabricante del puente de comunicaciones SPI-USB MCP2210 liberó una librería (dll) compatible y sin errores, por lo que se nos ofrecía una oportunidad interesante para la comparación de las velocidades de acceso al transceptor de radio, que se presuponía y se comprobó más eficiente que la solución ya hecha mediante NI-VISA. ABSTRACT. The Formula SAE competition is an international university applied to technological innovation in vehicles racing type formula, in which each team, made up of students, should design, construct and test a prototype each year within certain rules. The challenge of FSAE is that it is an educational project farther away than a master class. The goal of the present project is to make a tool for other students to use it in his projects related to FSAE to test and improve the vehicle, and, the improvements that can be provided by the electronics could be materialized in a victory and win the competition with this competitive advantage. A telemetry system was developed. It sends the data provided by the car’s CAN bus through a radio frequency transceiver and receive commands to execute on the system, it provides by a base station on the ground. Moreover, constant verification in real time of the status of the car or data parameters like the revolutions per minute, pressure from collectors, water temperature, and so on, can be accessed from the base station on the ground, so that, it could be possible to study the behaviour of the vehicle in early phases of the car development. A printed circuit board, composed of two boards, and two software programs in two different languages, have been developed, and built for the project implementation. The software utilized to design the PCB is Orcad10.5/Layout. The base station PCB on a PC receives data from the PCB connected to the vehicle’s CAN bus and sends commands like set CAN filters or masks, activate data logger or inject CAN frames. This PCB is connected to a PC via USB and contains a bridge USB-SPI to communicate with a similar transceiver on the vehicle PCB. LabView controls this part of the system. A special virtual Instrument (VI) had been created in order to add future new elements to the vehicle, is a dashboard, which reads the data passed from the main VI and represents them graphically to studying the behaviour of the car on track. In this special VI other alums can make modifications to accommodate the data provided from the vehicle CAN’s bus to new elements on the vehicle, show or save the CAN frames in the form or format they want. Two methods to access to SPI bus of CC110l RF transceiver over LabView have been developed with minimum changes between them. Access through NI-VISA (Virtual Instrument Software Architecture) which is a standard for configuring, programming, USB interfaces or other devices in National Instruments LabView. And access through DLL (dynamic link library) supplied by the manufacturer of the bridge USB-SPI, Microchip. Then the work is done in two forms, but the dll solution developed shows better behaviour, and increase the speed of the system because has less overload of the USB bus due to a better efficiency of the dll solution versus VISA solution. The PCB connected to the vehicle’s CAN bus receives commands from the base station PCB on a PC, and, acts in function of the command or execute actions like to inject packets into CAN bus or activate data logger. Also sends over RF the CAN frames present on the bus, which can be filtered, to avoid unnecessary radio emissions or overflowing the RF transceiver. This PCB consists of two basic pieces: A microcontroller with 32 bit architecture PIC32MX795F512L from Microchip and the radio transceiver integrated circuit CC110l from Texas Instruments. The PIC32MX795F512L has an integrated CAN and several peripherals like SPI controllers that are utilized to communicate with RF transceiver and SD Card. The USB controller on the PIC32 is utilized to store CAN data on a USB memory, and change notification peripheral is utilized like an external interrupt. Hardware for other peripherals is accessible. The software part of this PCB is coded in C with MPLAB from Microchip, and programming over PICkit 3 Programmer, also from Microchip. Some of his libraries have been modified to work properly with this project and other was created specifically for this project. In the phase for RF selection and design is made a study to clarify the general aspects of regulations for the this project in order to understand it and select the proper band, frequency, and radio transceiver for the activities developed in the project. From the different options available it selects a common use band ICM, with less regulation and free to emit with restrictions and disadvantages like high occupation. The transceiver utilized to transmit and receive the data CC110l is an integrated circuit which needs fewer components from Texas Instruments and it can be accessed through SPI bus. Basically is a state machine which changes his state whit commands received over an SPI bus or internal events. The transceiver has several programmable general purpose Inputs and outputs. These GPIOs are connected to PIC32 change notification input to generate an interrupt or connected to GPIO to MCP2210 USB-SPI bridge to inform to the base station for a packet received. A two pair of modules of CC110l radio module kit from different output power has been purchased which includes an antenna. This is to keep away from fabrication mistakes in RF hardware part or designs, although reference design and gerbers files are available on the webpage of the chip manufacturer. A neck bottle is present on the complete system, because the maximum data rate of CC110l transceiver is a half than CAN bus data rate, hence for high occupation of CAN bus is recommendable to filter the data or add more radio channels, because the buffers can’t sustain this load along the time. Unfortunately, during the development of the project, the relations with the INSIA, who develops the vehicle, was lost, for this reason, will be made impossible to test the final phases of the project like integration on the car, final test of integration, place of the antenna, enclosure of the electronics, connectors selection, etc. To test or evaluate the system, it was necessary to simulate the CAN bus with a hardware to feed the system with entry data. An early hardware prototype was adapted his software to send programed CAN frames at a fixed data rate and certain timing who simulate several levels of occupation of the CAN Bus. This CAN frames emulates the Bosch ECU MS3 Sport.

La silla de la discordia : la pequeña escala como campo de experimentación en la modernidad : Breuer, Mies y Stam

El siglo XIX fue un siglo dedicado a los grandes edificios públicos. Los teatros, las academias, los museos. Sin embargo la arquitectura durante el siglo XX se dedicará al estudio de la casa. Todos los usos y tipologías se verán fuertemente revisados pero el núcleo de todos los esfuerzos y verdadero inicio de la arquitectura moderna será la vivienda. A partir de ella todos los preceptos modernos se irán aplicando a los distintos programas. Nikolaus Pevsner señala a William Morris como el primer arquitecto moderno porque precisamente entendió que un arte verdaderamente social, en consonancia con su tiempo y la sociedad a la que sirve, ha de ocuparse de aquello que preocupe a la gente. Con la nueva situación de la vivienda en el centro de las motivaciones disciplinares el mueble adopta un nuevo protagonismo. En un momento avanzado de su carrera Marcel Breuer observa entre curioso e irónico cómo el mueble moderno había sido promocionado paradójicamente no por los diseñadores de muebles sino por los arquitectos1. La respuesta la da Le Corbusier en una de sus conferencias de 1931 recogida en Precisiones 2 cuando señala la reformulación del mobiliario como el "nudo gordiano" de cuya resolución pendía la renovación de la planta moderna. El Movimiento Moderno se había visto obligado a atacar este tema para poder avanzar en sus propuestas domésticas. El Movimiento Moderno se propuso solucionar los problemas de la vivienda y de una Europa en reconstrucción pero se exigía además ser capaz de aportar una visión propositiva de la vida moderna. No se trataba únicamente de resolver los problemas ya existentes sino que además había la necesidad autoimpuesta de anticipar la domesticidad del futuro. Para ello sus viviendas al completo, mueble e inmueble, debían de presentarse bajo esa nueva imagen. El manifiesto fundacional de la Deustcher Werkbund extendía el radio de acción del nuevo arquitecto desde la construcción de las ciudades a los cojines del sofá. Este mobiliario tenía la compleja misión de condensar sintéticamente todos esos ideales que la modernidad había traído consigo: abstracción, higiene, fascinación maquínica, confianza positivista en la ciencia o la expresión material optimizada. Objetos de la vida moderna, en palabras de Le Corbusier, susceptibles de suscitar un estado de vida moderno. Pocas sillas en la historia del diseño habrán acarreado tanta polémica y tanta disputa por su autoría como la sillas voladas de tubo de acero en sus diferentes versiones. Para entenderlo situémonos en el año 1927 a las puertas de la exposición "Die Wohnung" ("La vivienda") organizada por los maestros de la Bauhaus y dirigida por Mies van der Rohe en la ladera Weissenhof de Stuttgart. Muchos nombres célebres de la arquitectura mostraron en esa ocasión su personal propuesta para la vivienda moderna y los objetos que la habitan. Entre ellos los muebles con tubo de acero fueron una presencia constante en la exposición pero hubo una pieza que destacó sobre todas las demás por su novedad y audacia. La pieza en cuestión era el modelo de silla volada, esto es, sin apoyos posteriores y cuya rigidez estaba conferida al esfuerzo solidario de la estructura continua de tubo de acero y que terminaría por convertirse en el cruce de caminos de tres figuras de la disciplina arquitectónica: Marcel Breuer, Mies van der Rohe y Mart Stam. Cada uno de ellos desarrolló su propio modelo de silla volada en sus versiones MR por parte de Mies, L&C Arnold de Stam y el posterior modelo BR 33 de Marcel Breuer. Los tres, en algún momento de su vida reclamaron de uno u otro modo su autoría como objetos que les pertenecían intelectualmente. Estas sillas se convirtieron en la expresión máxima de uno de los ansiados anhelos de la modernidad, la propia materialidad del acero, en su versión optimizada, era la que había derivado en una forma completamente nueva de un objeto cotidiano y cuyo tipo estaba ya totalmente asumido. Los nuevos materiales y las nuevas formas de hacer habían irrumpido hasta en los utensilios domésticos, y habían sido capaces de reformularlos. El punto de partida para esta investigación es precisamente esa coincidencia de tres figuras de la arquitectura moderna, los tres de formación artesanal, en un mismo modelo de silla y en una misma fecha. Tres arquitectos que se habían encargado de asegurar que el movimiento moderno no reconocía problemas formales sino solamente de construcción, iban a coincidir en el mismo tiempo y lugar, precisamente en una misma forma, como si tal coincidencia hubiera sido producto de una voluntad de época. Sin embargo el interés de este estudio no radica en una indagación sobre la autoría sino sobre cómo un mismo objeto resulta ser propositivo e interesante en campos muy diversos y la forma en que cada uno lo hace suyo incorporándolo a su propia investigación proyectual. La silla, más allá de ser un objeto de diseño exclusivamente, trasciende su propia escala para situarse inmersa en un proceso de búsqueda y exploración a nivel conceptual, formal, constructivo y estructural en la arquitectura cada uno de ellos. En un momento en que el oficio del arquitecto está siendo intensamente redefinido considero especialmente pertinente esta investigación, que en definitiva versa sobre la forma distintiva en que el pensamiento arquitectónico es capaz de proyectarse sobre cualquier disciplina para reformularla. ABSTRACT The nineteenth century was a century dedicated to the great public buildings; theaters, schools or museums. However the architecture in the twentieth century was devoted to the study of housing. All uses and typologies were heavily revised but the focus of all efforts and true beginning of modern architecture was housing. From these beginnings all modern precepts were applied to the various programs. Nikolaus Pevsner points to William Morris as the first modern architect precisely because he understood that a truly social art in line with its time and the society it serves must deal with social concerns at that time. With the new housing situation at the center of disciplinary concerns furniture took on a new prominence. At an advanced stage of his career Marcel Breuer observed partly with curiosity, partly with irony how modern furniture had been promoted not by furniture designers but by architects. The answer is given by Le Corbusier in one of his lectures of 1931 collected in Precisions when he pointed the reformulation of furniture as the "Gordian knot" for the renewal of modern plan resolution. Modernism had been forced to confront this issue in order to advance their domestic approaches. Modernism not only put forward a solution to the problems of housing and a Europe under reconstruction but is also needed to be able to contribute to an exciting vision of modern life. Not only did solve existing problems but also it had the self-imposed necessity of anticipating future domesticity and to do their houses full, movable and immovable, they should be submitted under this new image. The founding manifesto of the Deutsche Werkbund extended the scope of the new architect from building cities to the couch cushions. This furniture had the complex mission of synthetically condensing all the ideals of modernity had brought with it: abstraction, hygiene, mechanization, positivist confidence in science or material expression. Objects of modern life, in words of Le Corbusier, were likely to give rise a state of modern life. Few chairs in design history have resulted in so much controversy and so much dispute over their invention as the various versions of cantilevered tubular steel chairs. To understand this let us place ourselves in 1927 at the gates of the exhibition "Die Wohnung" ("Housing") organized by the teachers of the Bauhaus and directed by Mies van der Rohe in Stuttgart Weissenhoflung. Many famous names in architecture at that time showed their personal proposals for modern housing and the objects that inhabit them. Amongst these objects, the steel tube furniture was a constant presence at the exhibition but there was a piece so audacious that it stood out from all the others. This piece in question was the cantilever model chair, that is, which had no further rear support and whose rigidity was attributed to the solidity of its continues structure of steel tube. This piece would eventually become the crossroads of three very different personalities: Mart Stam, Marcel Breuer and Mies van der Rohe. Each of them developed their own model of cantilevered chair in different versions; The MR model developed by Mies van der Rohe, the L&C by Arnold Stam and a later model BR 33 by Marcel Breuer, and the three, at some point in their lives demanded the authorship of its invention as objects that belonged to them intellectually. These chairs epitomized one of the coveted objects of modernity, steel material in its optimized version, was what had led to a completely new form of an everyday object whose this type was fully adopted on board in design. New materials and production methods had burst into world of household objects, and had been able to reformulate their design. The bold design then became a dark object of controversy. The starting point for this doctoral thesis is the concurrent invention of the same model of chair by three different figures of modern architecture. These three architects, who were responsible for ensuring that the modern movement considered construction rather than form as the main design consideration, were working in the same place and at the same point in time. It was almost as if these three architects were shaped by the culture of the time (Zeitgeist). However the focus of this study lies not in an investigation of responsibility of ownership but in the investigation fo how the same object can turn out to be purposeful and interesting in many different fields and the way in which each researcher makes it his own by developing his own project research. 1927, the year of their meeting, was a initiatory year in the career of our players. The chair, beyond being only a design object transcended its own scale and became immersed in a process of research and development on a conceptual, formal, structural and constructive level in the architectural approach of each of the architects. At a time when the role of the architect is being redefined intensely I consider this research, which ultimately concerns the distinctive way the architectural thought can be projected onto and reformulate any discipline, to be particularly relevant.

Adaptación de GNU Radio a procesadores KeyStone II 66AK2xxx

En el presente proyecto se ha procedido a implantar la herramienta de procesado software GNU Radio en la tarjeta EVMK2H, que es un módulo de evaluación fabricado por Texas Instruments que incorpora un System on Chip (SoC) 66AK2H14 de la familia Keystone II, el cual dispone de 4 núcleos ARM y 8 núcleos DSP. Previamente a la instalación de GNU Radio, hubo que configurar la tarjeta, así como instalar el software necesario. De igual manera, se realizó una primera aproximación para comprender el funcionamiento de los sistemas de comunicación entre núcleos de que hace uso la tarjeta, y de los que se hizo uso posteriormente en el proyecto. Tras el portado de GNU Radio se ha comprobado el correcto funcionamiento del mecanismo de comunicación entre núcleos ARM y DSP con un par de aplicaciones de prueba. ABSTRACT. In the present project it was performed the implementation of the software processing toolkit GNU Radio into the EVMK2H board, which is an evaluation module from Texas Instruments that includes a 66AK2H14 System on Chip (SoC) from the Keystone II family, that provides 4 ARM cores and 8 DSP cores. Before installing GNU Radio, it was necessary to configure the board, and as well installing other needed software. Also, a first approach was performed to understand the way the communication system between cores included in the board works, which was used later in the project. After porting GNU Radio, some test applications have been written to test the correct operation of the communication mechanism between ARM and DSP cores.

Debian Hamradio and Software Defined Radio : Overview of the Debian Ham blend, ham radio and software defined radio

Non peer reviewed

Very large radio surveys of the sky

Recent advances in electronics and computing have made possible a new generation of large radio surveys of the sky that yield an order-of-magnitude higher sensitivity and positional accuracy. Combined with the unique properties of the radio universe, these quantitative improvements open up qualitatively different and exciting new scientific applications of radio surveys.

Very-long-baseline radio interferometry surveys of the compact structure in active galactic nuclei.

Very-long-baseline radio interferometry (VLBI) imaging surveys have been undertaken since the late 1970s. The sample sizes were initially limited to a few tens of objects but the snapshot technique has now allowed samples containing almost 200 sources to be studied. The overwhelming majority of powerful compact sources are asymmetric corejects of one form or another, most of which exhibit apparent superluminal motion. However 5-10% of powerful flat-spectrum sources are 100-parsec (pc)-scale compact symmetric objects; these appear to form a continuum with the 1-kpc-scale double-lobed compact steep-spectrum sources, which make up 15-20% of lower frequency samples. It is likely that these sub-galactic-size symmetric sources are the precursors to the large-scale classical double sources. There is a surprising peak around 90 degrees in the histogram of misalignments between the dominant source axes on parsec and kiloparsec scales; this seems to be associated with sources exhibiting a high degree of relativistic beaming. VLBI snapshot surveys have great cosmological potential via measurements of both proper motion and angular size vs. redshift as well as searches for gravitational "millilensing."

Morphology of high-luminosity compact radio sources.

High-dynamic range imaging and monitoring with very-long-baseline interferometry reveal a rich morphology of luminous flat-spectrum radio sources. One-sided core-jet structures abound, and superluminal motion is frequently measured. In a few cases, both distinct moving features and diffuse underlying jet emission can be detected. Superluminal motion seen in such sources is typically complex, on curved trajectories or ridge lines, and with variable component velocities, including stationary features. The curved trajectories seen can be modeled by helical motion within the underlying jet flow. The very-long-baseline interferometry properties of the superluminal features in the jet of 3C 345 and other similar sources can be explained by models invoking the emission from shocks, at least within the vicinity of the compact core. Inverse-Compton calculations, constrained by x-ray observations, yield realistic estimates for the physical conditions in the parsec-scale jet. There is evidence for a transition region in this source beyond which other factors (e.g., plasma interactions and nonsynchrotron radiation processes) may become prominent. Multifrequency and polarization imaging (especially at high frequencies) are emerging as critical tools in testing model predictions.

Very-long-baseline radio interferometry observations of low power radio galaxies.

The parsec scale properties of low power radio galaxies are reviewed here, using the available data on 12 Fanaroff-Riley type I galaxies. The most frequent radio structure is an asymmetric parsec-scale morphology--i.e., core and one-sided jet. It is shared by 9 (possibly 10) of the 12 mapped radio galaxies. One (possibly 2) of the other galaxies has a two-sided jet emission. Two sources are known from published data to show a proper motion; we present here evidence for proper motion in two more galaxies. Therefore, in the present sample we have 4 radio galaxies with a measured proper motion. One of these has a very symmetric structure and therefore should be in the plane of the sky. The results discussed here are in agreement with the predictions of the unified scheme models. Moreover, the present data indicate that the parsec scale structure in low and high power radio galaxies is essentially the same.

Structure and evolution of the compact radio source in NGC 1275.

Investigations of the fine-scale structure in the compact nucleus of the radio source 3C 84 in NGC 1275 (New General Catalogue number) are reported. Structural monitoring observations beginning as early as 1976, and continuing to the present, revealed subluminal motions in a jet-like relatively diffuse region extending away from a flat-spectrum core. A counterjet feature was discovered in 1993, and very recent nearly simultaneous studies have detected the same feature at five frequencies ranging from 5 to 43 GHz. The counterjet exhibits a strong low-frequency cutoff, giving this region of the source an inverted spectrum. The observations are consistent with a physical model in which the cutoff arises from free-free absorption in a volume that surrounds the core but obscures only the counterjet feature. If such a model is confirmed, very-long-baseline radio interferometry observations can then be used to probe the accretion region, outside the radio jet, on parsec scales.

The nuclear jet and counterjet region of the radio galaxy Cygnus A.

Very-long-baseline interferometry images of the nuclear region of the radio galaxy Cygnus A reveal a pronounced "core" and a knotty jet and counterjet. The knots are moving away from the core at apparent speeds which are subluminal for h = 1 [h = H0/100 km.s-1.Mpc-1;1 parsec (pc) = 3.09 x 10(16)m] and about c for h = 0.5. The jet is aligned with the outer, kiloparsec-scale jet to within 2 degrees. The counterjet has a total flux density at 5 GHz of about one-fifth of that of the jet. In the context of the twin relativistic jet model for active galactic nuclei, the jet in Cygnus A is oriented at an angle to our line of sight of 35-80 degrees and 55-85 degrees, and the intrinsic velocity of the jet fluid is 0.4-0.6c and 0.6-1c for h = 1 and h = 0.5, respectively.

Very-long-baseline radio interferometry (VLBI) observations of gamma-ray blazars: results from millimeter-VLBI observations.

VLBI observations of the extremely gamma-bright blazar PKS 0528+134 at 8, 22, 43, and 86 GHz reveal a strongly bent one-sided-core jet structure with at least three moving and two apparently stationary jet components. At the highest observing frequencies the brightest and most compact jet component (the VLBI core) is unresolved with an upper limit to its size of approximately 50 microarcsec corresponding to approximately 0.2 parsec [H0 = 100 km.s-1.Mpc-1 (megaparsec-1), q0 = 0.5, where H0 is Hubble constant and q0 is the deceleration parameter]. Two 86-GHz VLBI observations performed in 1993.3 and 1994.0 reveal a new jet component emerging with superluminal speed from the core. Linear back-extrapolation of its motion yields strong evidence that the ejection of this component is related to an outburst in the millimeter regime and a preceding intense flare of the gamma-flux density observed in early 1993. This and the radio/optical "light curves" and VLBI data for two other sources (S5 0836+710 and 3C 454.3) suggest that the observed gamma-radiation might be Doppler-boosted and perhaps is closely related to the physical processes acting near the "base" of the highly relativistic jets observed in quasars.