Comparação energética de tijolos comum e sem queima pela análise do ciclo de vida

This work is part of several research related to the plan of design and construction of a sustainable house. The previous researches focused on sustainable materials and it have shown that ceramic material are more interesting to improve the thermal comfort and the reduction of fees and prices of the house, making possible to construct popular home, mainly clay bricks, that have high thermal inertia and low costs, besides the fact that it is easy to find the raw materials in nature and process them. However, a major issue in using clay bricks is that it uses too many energy to be processed during the sintering (burning), a crucial part of the process that assures mechanical resistance. Alternative materials are being proposed by the researchers, as the clay bricks without the sintering mixed with Portland cement, assuring the proper resistance to the brick. Raw materials of cement, however, also need to be thermally processed in rotary kilns, in a process called clinckerization. This research was proposed for comparing the energy used by the two types of bricks and other objectives, in order to determinate which one uses less thermal energy. The intention was to compare the energy used during the sintering of regular clay bricks and the unfired bricks with 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90% and 100% of Portland cement. The paper also investigated and compared the use of electrical and thermal energy of all the bricks to identify how important were the thermal stages (sintering or clinkerization) relatively to the total energy spent. At last, a resumed analysis was performed to identify the possible health damages of the many life cycles of the bricks. The conclusion was that unfired bricks with less than 40% of cement use less thermal energy to be processed. In addition, their carbon dioxides emissions were less dangerous to ... (Complete abastract click electronic access below)

Eficiência agronômica de adubos nitrogenados em soqueira de cana-de-açúcar colhida sem queima

O objetivo deste trabalho foi avaliar a eficiência agronômica das fontes nitrogenadas ureia (U), nitrato de amônio (NA), sulfato de amônio (SA) e cloreto de amônio (CA) em soqueira de cana-de-açúcar colhida sem queima, bem como determinar o efeito residual dessas fontes sobre a produtividade da cultura no ano agrícola subsequente. Utilizou-se o delineamento experimental de blocos ao acaso, com quatro repetições. Os tratamentos consistiram da aplicação de 120 kg ha-1 de N a um Latossolo Vermelho distrófico, coberto por palhada resultante da colheita sem queima da primeira soqueira. Incluiu-se um tratamento de controle sem adição de N fertilizante. Para avaliar o efeito residual dos adubos nitrogenados, aplicaram-se 450 kg ha-1 do formulado 20-5-19 após o corte da cana-soca. A maior produção de colmos e de açúcar na safra 2006/2007 foi obtida com a fonte SA. Na safra 2007/2008, não foi verificado efeito residual da adubação nitrogenada e houve queda de produtividade do tratamento CA em comparação ao controle. A fonte CA, à dose de 120 kg ha-1 de N em adubação de soqueira de segundo corte, é agronomicamente tão eficiente quanto as demais fontes de N utilizadas, mas tem menor eficiência no ano agrícola subsequente.

Corte foliar e tempo de transplantio para o uso de plântulas do sub-bosque na restauração florestal

O uso de plântulas da regeneração natural tem sido recomendado como estratégia para produção de mudas visando à restauração florestal, contudo muitos aspectos técnicos desse método ainda carecem de investigação científica. O objetivo deste trabalho foi avaliar o efeito da redução da área foliar e do transplantio imediato na sobrevivência e crescimento de mudas de espécies arbóreas produzidas a partir de plântulas obtidas da regeneração natural. Plântulas de Esenbeckia leiocarpa (Rutaceae), Eugenia ligustrina (Myrtaceae) e Maytenus salicifolia (Celastraceae), obtidas em remanescente de vegetação secundária de Floresta Estacional Semidecidual em Bofete, SP, foram extraídas do solo e submetidas aos tratamentos: I) redução de 50% da área de cada folha e transplantio imediato; II) nenhuma redução de área das folhas e transplantio imediato; III) redução de 50% da área de cada folha, manutenção das plântulas em água e transplantio 24 h após a coleta; e IV) nenhuma redução de área das folhas, manutenção das plântulas em água e transplantio 24 h após a coleta. As mudas foram avaliadas com relação à sobrevivência e ao crescimento em altura, ao longo de oito meses. Os resultados evidenciaram que nem o corte das folhas ou a manutenção das plântulas dentro de recipientes com água por 24 h antes do transplantio afetaram os parâmetros avaliados. Assim, para as espécies estudadas a redução da área foliar e o transplantio imediato são desnecessários para a produção de mudas em viveiro a partir de plântulas obtidas da regeneração natural.

Estimativa do índice de área foliar e temperatura em uma área de eucalipto

It is known that the presence of large masses of vegetation is a factor that can influence the microclimate of a region. In this paper we analyzed the correlation between leaf area index (LAI) and land surface temperature (LST), both estimated from remote sensing images from Landsat-5 TM in an area of eucalyptus plantation, and these estimates were compared to the observed data. The correlation between LAI and LST was not significant (16%), which indicates that there is no necessarily a direct influence of vegetation in the local temperature. The comparison between estimated and observed data shows that the application of remote sensing techniques in the estimative of interested variables is efficient, because the estimatives followed consistently the observed values.

Investigación sobre el reconocimiento automático foliar de la laurisilva canaria

[ES] La investigación que se resume en el presente artículo, da evidencia de la posibilidad de lograr exitosamente una taxonomía de laurásea canaria de forma automática, usando muestras de hojas. Imágenes digitalizadas por medio de un escáner, de un muestrario de hojas, son usadas como elementos de clasificación. Éstas son procesadas, extrayendo parámetros discriminantes que, por medio de diferentes modelos de aprendizaje automático, los identifican como descriptivos de pertenencia a una especie. El resultado se presenta con un valor de evidencia, medición que permite evaluar el peso de parámetros o conjuntos de parámetros en la clasificación. El sistema podría ser usado para determinar parámetros taxonómicos que permitan establecer un sistema de patentes de plantas desarrolladas o descubiertas, de interés económico.

New techniques for the remote sensing of foliar nitrogen concentration in forest ecosystems.

During my Doctoral study I researched about the remote detection of canopy N concentration in forest stands, its potentials and problems, under many overlapping perspectives. The study consisted of three parts. In S. Rossore 2000 dataset analysis, I tested regressions between N concentration and NIR reflectances derived from different sources (field samples, airborne and satellite sensors). The analysis was further expanded using a larger dataset acquired in year 2009 as part of a new campaign funded by the ESA. In both cases, a good correlation was observed between Landsat NIR, using both TM (2009) and ETM+ (2000) imagery, and N concentration measured by a CHN elemental analyzer. Concerning airborne sensors I did not obtain the same good results, mainly because of the large FOV of the two instruments, and to the anisotropy of vegetation reflectance. We also tested the relation between ground based ASD measures and nitrogen concentration, obtaining really good results. Thus, I decided to expand my study to the regional level, focusing only on field and satellite measures. I analyzed a large dataset for the whole of Catalonia, Spain; MODIS imagery was used, in consideration of its spectral characteristics and despite its rather poor spatial resolution. Also in this case a regression between nitrogen concentration and reflectances was found, but not so good as in previous experiences. Moreover, vegetation type was found to play an important role in the observed relationship. We concluded that MODIS is not the most suitable satellite sensor in realities like Italy and Catalonia, which present a patchy and inhomogeneous vegetation cover; so it could be utilized for the parameterization of eco-physiological and biogeochemical models, but not for really local nitrogen estimate. Thus multispectral sensors similar to Landsat Thematic Mapper, with better spatial resolution, could be the most appropriate sensors to estimate N concentration.

Foliar fungal pathogens and grassland biodiversity

By attacking plants, herbivorous mammals, insects, and belowground pathogens are known to play an important role in maintaining biodiversity in grasslands. Foliar fungal pathogens are ubiquitous in grassland ecosystems, but little is known about their role as drivers of community composition and diversity. Here we excluded foliar fungal pathogens from perennial grassland by using fungicide to determine the effect of natural levels of disease on an otherwise undisturbed plant community. Importantly, we excluded foliar fungal pathogens along with rabbits, insects, and mollusks in a full factorial design, which allowed a comparison of pathogen effects along with those of better studied plant enemies. This revealed that fungal pathogens substantially reduced aboveground plant biomass and promoted plant diversity and that this especially benefited legumes. The scale of pathogen effects on productivity and biodiversity was similar to that of rabbits and insects, but different plant species responded to the exclusion of the three plant enemies. These results suggest that theories of plant coexistence and management of biodiversity in grasslands should consider foliar fungal pathogens as potentially important drivers of community composition.

Effectiveness of Foliar Fungicides by Timing on Hybrid Corn

Fungicides were rarely used on hybrid corn prior to 2007, however, in the past few years, some farmers have included fungicides in their common crop production, particularly as the value of grain has increased. Fungicides are recommended for foliar disease management to protect yield potential. There also have been reports of increased yields in the absence of disease. A number of fungicides are registered for use on corn. The objectives of this project were to evaluate the yield response of hybrid corn to foliar fungicide application at various timings.

Evaluation of Foliar Fungicides and Insecticides on Soybean

Use of foliar fungicides and insecticides are an effective strategy for managing foliar diseases on soybean. There are many different fungicides and insecticides available for use currently in Iowa. Iowa State University personnel assessed the success of fungicides and insecticides across Iowa. This study was conducted at six locations: Sutherland (NW), Kanawha (NC), Nashua (NE), Ames (central), Crawfordsville (SE), and Lewis (SW) research farms (Figure 1).

Effectiveness of Foliar Fungicides by Timing on Hybrid Corn

Fungicide use on hybrid corn has increased considerably in the past four growing seasons primarily due to reports of increased yields, even in the absence of disease and higher corn prices. A number of fungicides are registered for use on corn. The objectives of this project were to 1) assess the effect of timing of application of fungicides on standability, 2) evaluate the yield response of hybrid corn to foliar fungicide application, and 3) to discern differences, if any, between fungicide products.

Evaluation of Foliar Fungicides and Insecticides on Soybeans

Use of foliar fungicides and insecticides are an effective strategy for managing foliar diseases of soybean. There are many different fungicides and insecticides available for use currently in Iowa. Iowa State University personnel assessed the success of fungicides and insecticides across Iowa. This study was conducted at six locations: Sutherland (NW), Kanawha (NC), Nashua (NE), Ames (central), Crawfordsville (SE), and Lewis (SW) research farms (Figure 1).

Effectiveness of Foliar Fungicides by Timing on Hybrid Corn in Iowa

Fungicide use on hybrid corn has increased considerably in the past three growing seasons primarily due to reports of increased yields, even in the absence of disease and higher corn prices. A number of fungicides are registered for use on corn. The objectives of this project were to 1) evaluate the yield response of hybrid corn to foliar fungicide application, 2) compare the yield response of various products and timing of application, and 3) to assess the effect of fungicide application on stalk rot development.