942 resultados para protonic conduction
Resumo:
O objetivo deste trabalho foi avaliar cultivares de melão rendilhado produzidas em plantas sob raleio dos frutos. Foram estudadas as cultivares Maxim, Louis, Fantasy, Shinju 200, e Bônus nº2, com as plantas conduzidas com dois e três frutos. O delineamento experimental foi em blocos ao acaso, em esquema fatorial 5x2, com quatro repetições e com as plantas dispostas no espaçamento de 1,0 m entre linhas e 0,5 m entre plantas. O experimento foi realizado em casa de vegetação, utilizando-se fertirrigação e vasos plásticos de 13 L, preenchidos com fibra da casca de coco Golden Mix® Misto 98. As mudas foram produzidas em bandejas de poliestireno expandido de 128 células e quando estavam com a primeira folha definitiva completamente desenvolvida foram transplantadas aos vasos. Foram avaliados o rendilhamento da casca, os diâmetros longitudinal e transversal do fruto, o índice de formato do fruto, os diâmetros longitudinal e transversal do lóculo, o índice de formato do lóculo, a espessura do mesocarpo, a massa média dos frutos e a produção por planta. Não houve interação entre os fatores estudados. Nas condições deste experimento, a condução de dois frutos por planta resultou em maior rendilhamento da casca, maior diâmetro transversal do fruto, maior diâmetro longitudinal do lóculo e maior massa média dos frutos. Porém, as maiores produções por planta foram observadas quando conduzidas com três frutos. Os híbridos Fantasy e Shinju 200 apresentaram as melhores características de frutos e maiores produções.
Resumo:
Sementes de hortaliças quase sempre apresentam elevado valor comercial, motivo pelo qual devem ter o potencial fisiológico eficientemente avaliado. O teste de deterioração controlada é um dos recomendados para avaliação do vigor de sementes pequenas, como as de beterraba. O objetivo do trabalho foi determinar o melhor procedimento para a condução de referido teste em sementes de beterraba e sua relação com a emergência de plântulas em campo. Foram utilizados sete lotes de sementes da cultivar Top Tall Early Wonder, adquiridos no comércio. Após lavagem em água corrente, as sementes foram submetidas aos testes de germinação, velocidade de germinação, envelhecimento acelerado, emergência de plântulas em campo, velocidade de emergência e deterioração controlada (temperaturas de 41 e 45ºC, teores de água de 22, 24 e 26% e períodos de exposição de 12, 24 e 36 horas). As combinações 41ºC/24%/12 h, 41ºC/24%/36 h, 41ºC/26%/36 h e 45ºC/24%/24 h apresentaram potencial para uso na avaliação do vigor de sementes de beterraba. No entanto, sob as combinações de 41°C/24%/12 h ou 45°C/24%/24 h reduziu-se o tempo de condução do teste.
Resumo:
Foram selecionadas três plantas de um pomar comercial, com características agronômicas desejáveis, proveniente de propagação seminífera, que forneceram estacas herbáceas, contando com cerca de 15 cm de comprimento, um par de folhas no nó superior, corte em bisel na base e foram tratadas com 4 doses de IBA (0, 1.000, 3.000 e 5.000 mg.l-1) e, posteriormente, plantadas em caixas plásticas perfuradas contendo como substrato, vermiculita textura média. A condução do experimento foi em ambiente de 50 % de sombreamento, sob nebulização intermitente. A análise estatística foi em esquema fatorial 3X4, (genótipos X doses de IBA), com 4 repetições de 10 estacas cada. Após 90 dias foram avaliados a percentagem de enraizamento e sobrevivência, o comprimento e número médio de raízes por estaca. O IBA não influenciou as variáveis analisadas. O genótipo somente induziu mais raízes na seleção 3 e maiores raízes nas seleções 1 e 3.
Resumo:
Na Universidade Estadual Paulista, Câmpus de Jaboticabal-SP, estudou-se o comportamento de Passifloráceas quanto à morte prematura de plantas, cultivadas em local com histórico da doença. O objetivo do trabalho foi avaliar o comportamento de diversos acessos de populações e espécies de maracujazeiros em relação a esta doença, sendo que as plantas resistentes deverão ser utilizadas como porta-enxertos de formas comerciais de maracujá-amarelo (Passiflora edulis Sims f. flavicarpa) e em programas de melhoramento genético. As espécies utilizadas foram P. edulis Sims, P. edulis Sims f. flavicarpa Degener, P. nitida H.B.K., P. cincinnata, P. giberti, P. laurifolia, P. morifolia, P. foetida e P. capsularis. em local com histórico da doença, plantaram-se mudas em número variável e em épocas distintas. A condução das plantas e os tratos culturais foram os recomendados para o maracujá-amarelo. A morte prematura das plantas ocorreu entre dois meses e dois anos da cultura no campo. P. giberti e P. nitida mostraram-se resistente à doença, independentemente do local de origem. Entre os demais acessos, não se encontraram fontes promissoras de resistência. Entretanto, novos acessos e novas espécies deverão ser estudadas na busca da resistência.
Resumo:
A Mimosa caesalpiniaefolia Benth. é uma espécie nativa da região Nordeste, que vem sendo progressivamente cultivada do Maranhão ao Rio de Janeiro. A planta apresenta grande potencial para arborização, cerca viva e produção de madeira. O presente trabalho teve como objetivo definir o tipo de substrato, a temperatura, o tempo médio e a frequência relativa de germinação, para auxiliar a condução de testes de germinação e vigor em sementes de Mimosa caesalpiniaefolia. Para tanto, realizou-se um experimento no Laboratório de Análise de Sementes do CCA-UFPB, em Areia-PB, em delineamento inteiramente casualizado com os tratamentos distribuídos em esquema fatorial 4x4, com os fatores temperaturas (20, 25, 30ºC constantes e 20-30ºC alternadas) e substratos (entre papel, sobre papel, entre areia e entre vermiculita), em quatro repetições de 25 sementes. Foram analisados os seguintes parâmetros: porcentagem de germinação e de plântulas anormais, primeira contagem da germinação e velocidade de germinação, tempo médio e frequência relativa de germinação, massa fresca e massa seca de plântulas. A temperatura de 25ºC mostrou-se mais adequada para a condução dos testes de germinação e vigor em sementes de Mimosa caesalpiniaefolia, independentemente do substrato utilizado. O substrato entre papel foi o mais apropriado para avaliação da qualidade fisiológica das sementes e a sincronização do processo germinativo foi maior no substrato entre papel, independentemente da temperatura empregada.
Resumo:
The present study presents an investigation concerning the factors that, in the perception of the extension of Emater/RN they affect the competitiveness of the productive chain of the coconut in Rio Grande do Norte. For so much it is used of a theory structured starting from the several aspects that delineate the competitiveness and your respective factors, besides the aspects that compose the productive chain of the coconut in Rio Grande do Norte. The research was accomplished at the mesorregião Leste Potiguar of Rio Grande do Norte, territory of larger index of coconut production in the state. The used methodological approach was the one of descriptive exploratory research together to the conduction of a rising type Survey. The field research obtained 35 valid questionnaires, whose interviewees were the extension of Emater/RN in performance in the municipal districts that compose the mesorregião Leste Potiguar of Rio Grande do Norte. The results allow to end that in the perception of the extension, the level of competitiveness of the productive chain of the coconut in Rio Grande do Norte is still low, presenting as larger fetter the low price of the coconut and the high costs of the productive process, being recommended a larger support to the producing of coconut in relation to technical attendance, incentive actions to the quality, understanding with relationship to the benefits of the creation of partnerships, associations and cooperatives, as well as the promotion of the knowledge of the productive chain of the coconut in Rio Grande do Norte for subsequent ends of all the agents' of that chain training with relationship to the importance of the development of competitive advantages
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
It presents a solar collector to be used in a system for heating water for bathing, whose main characteristics are its low cost and easy manufacturing and assembly. The absorbing surface of the collector is formed by an aluminum plate with eight flaps where they lodge PVC pipes. The catchment area of solar radiation corresponds to 1.3 meters. The collector box was made of wood, is covered by transparent glass and thermal insulation of tire chips and expanded polystyrene (EPS). Absorber tubes were connected in parallel through the use of PVC fittings and fixed to the plate by the use of metal poles and rivets. The entire absorber received paint flat black for better absorption of sunlight. The system worked on a thermosiphon assembly and absorber of the collector has been tested in two configurations: with the tubes facing up, directly exposed to the impact of sunlight and facing down, exchanging heat with the plate by conduction. It was determined the most efficient configuration for the correct purpose. The solar collector was connected to a thermal reservoir, also alternative, low-cost forming the system of solar water heating. We evaluated thermal parameters that proved the viability of the heating system studied
Resumo:
This work presents an optimization technique based on structural topology optimization methods, TOM, designed to solve problems of thermoelasticity 3D. The presented approach is based on the adjoint method of sensitivity analysis unified design and is intended to loosely coupled thermomechanical problems. The technique makes use of analytical expressions of sensitivities, enabling a reduction in the computational cost through the use of a coupled field adjoint equation, defined in terms the of temperature and displacement fields. The TOM used is based on the material aproach. Thus, to make the domain is composed of a continuous distribution of material, enabling the use of classical models in nonlinear programming optimization problem, the microstructure is considered as a porous medium and its constitutive equation is a function only of the homogenized relative density of the material. In this approach, the actual properties of materials with intermediate densities are penalized based on an artificial microstructure model based on the SIMP (Solid Isotropic Material with Penalty). To circumvent problems chessboard and reduce dependence on layout in relation to the final optimal initial mesh, caused by problems of numerical instability, restrictions on components of the gradient of relative densities were applied. The optimization problem is solved by applying the augmented Lagrangian method, the solution being obtained by applying the finite element method of Galerkin, the process of approximation using the finite element Tetra4. This element has the ability to interpolate both the relative density and the displacement components and temperature. As for the definition of the problem, the heat load is assumed in steady state, i.e., the effects of conduction and convection of heat does not vary with time. The mechanical load is assumed static and distributed
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Aiming to evaluate the application effect of different sewage sludge ( SS) doses, with and without nitrogen addition, in the castorbean initial development, one experiment was installed in an entirely randomized experimental design, in split-plot scheme 5 X 2, constituted of five sewage sludge doses (0, 4, 8, 16 e 32 Mg ha(-1)) and nitrogen addition or not (15 kg ha(-1)), with five replications. The experimental unit was constituted of plastic bags with capacity of 3,5 dm(3) of soil. Fifty days after emergency it was evaluated height of plants, dry matter of the aerial part, nutrient content in the aerial part, soil electrical conductivity and soil chemical analysis. The SS doses promoted increase in the height of plants and dry matter of castorbean. The concentration of N, K, Mg and S and also the micronutrients Cu, Fe, Mn and Zn in the aerial part of the plants also suffered a positive effect with SS doses, the same didn't occur for the P and Ca concentrations. N addition increased the concentration of N, S, Cu and Zn in the plants. The SS did not present significant effect over pH levels, phosphorous, potassium, calcium, magnesium, organic matter and soil cation exchange capacity after the experiment conduction period.
Resumo:
Rare earth elements have recently been involved in a range of advanced technologies like microelectronics, membranes for catalytic conversion and applications in gas sensors. In the family of rare earth elements like cerium can play a key role in such industrial applications. However, the high cost of these materials and the control and efficiencies associated processes required for its use in advanced technologies, are a permanent obstacle to its industrial development. In present study was proposed the creation of phases based on rare earth elements that can be used because of its thermal behavior, ionic conduction and catalytic properties. This way were studied two types of structure (ABO3 and A2B2O7), the basis of rare earths, observing their transport properties of ionic and electronic, as well as their catalytic applications in the treatment of methane. For the process of obtaining the first structure, a new synthesis method based on the use of EDTA citrate mixture was used to develop a precursor, which undergone heat treatment at 950 ° C resulted in the development of submicron phase BaCeO3 powders. The catalytic activity of perovskite begins at 450 ° C to achieve complete conversion at 675 ° C, where at this temperature, the catalytic efficiency of the phase is maximum. The evolution of conductivity with temperature for the perovskite phase revealed a series of electrical changes strongly correlated with structural transitions known in the literature. Finally, we can establish a real correlation between the high catalytic activity observed around the temperature of 650 ° C and increasing the oxygen ionic conductivity. For the second structure, showed clearly that it is possible, through chemical processes optimized to separate the rare earth elements and synthesize a pyrochlore phase TR2Ce2O7 particular formula. This "extracted phase" can be obtained directly at low cost, based on complex systems made of natural minerals and tailings, such as monazite. Moreover, this method is applied to matters of "no cost", which is the case of waste, making a preparation method of phases useful for high technology applications
Resumo:
The use of the History and the Philosophy of Science (HPS) for the teaching of science and scientific subjects has been advocated in recent decades. It has been pointed out that the History of Science could make for a deeper learning of scientific concepts, since it would promote a contact with the problems which that knowledge has set out to solve. Furthermore, historical episodes would serve to put the discussions about the nature of scientific knowledge into context. With a view to explore those potentialities, the literature in the field has sought to identify the challenges and obstacles for the didactic transposition of subjects from the History of Science. Amongst many aspects, the deficiencies in the training of teachers, so that they can work with the insertion of HPS in the classroom have been highlighted. Another aspect that has been mentioned to be a challenge has to do with the didactic transposition of the Primary Sources, that is, of the original texts on the History of Science. The Primary Sources have significant potentialities: making a connection possible between scientists and concepts, showing the difficulties faced during scientific endeavors, perceiving the role of mistakes as obstacles to be surpassed, not as defeat, etc. On the other hand, there has been little exploration of these concepts in an educational context, due to their own peculiarities. The original texts are often hard to understand and their interpretation demands knowledge of the historical and scientific context in which they were written, as well as skills pertaining to the conduction of research in the field of the History of Science. With this scenario in mind, the research towards this Professional MSc degree starts from the challenge of elaborating and discussing proposals which could enable the didactical transposition of the Primary Sources. We have worked specifically with Primary Sources on the History of the Vacuum and of the Atmospheric Pressure, because of the insertion of these subjects in the Brazilian High School curriculum, in connection with the didactical textbooks. "Historic Journals" were made up from clippings of the original historical texts, as was a Didactical Unit, which takes the usual textbooks as a basis and contemplates using the Journals and the entire Primary Sources in High School. At last, we have elaborated and implemented a course designed for the preparation of teachers and for being an opportunity for the discussion of the feasibility of putting these kinds of proposal into practice
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)