Linkages of development and environment : in search of an integrated approach through sustainable development

Least developed countries (LDCs) are the primary victims of environmental changes, including present and future impacts of climate change. Environmental degradation poses a serious threat to the conservation and sustainable use of natural resources, thus hindering development in LDCs. Simultaneously, poverty is itself both a major cause and effect of global environmental problems. Against this backdrop, this essay argues that without recognition and protection of a collective right to development, genuine environmental protection will remain unachievable. Further, this essay submits that, particularly in the context of LDCs, the right to environment and the right to development are inseparable. Finally, this essay argues that the relationship between the right to environment and the right to development must fall within the paradigm of sustainable development if the promotion and protection of those rights are to be justified.

Modelling the flow of cane constituents through the milling process of a raw sugar factory

This thesis reports on an investigation to develop an advanced and comprehensive milling process model of the raw sugar factory. Although the new model can be applied to both, the four-roller and six-roller milling units, it is primarily developed for the six-roller mills which are widely used in the Australian sugar industry. The approach taken was to gain an understanding of the previous milling process simulation model "MILSIM" developed at the University of Queensland nearly four decades ago. Although the MILSIM model was widely adopted in the Australian sugar industry for simulating the milling process it did have some incorrect assumptions. The study aimed to eliminate all the incorrect assumptions of the previous model and develop an advanced model that represents the milling process correctly and tracks the flow of other cane components in the milling process which have not been considered in the previous models. The development of the milling process model was done is three stages. Firstly, an enhanced milling unit extraction model (MILEX) was developed to access the mill performance parameters and predict the extraction performance of the milling process. New definitions for the milling performance parameters were developed and a complete milling train along with the juice screen was modelled. The MILEX model was validated with factory data and the variation in the mill performance parameters was observed and studied. Some case studies were undertaken to study the effect of fibre in juice streams, juice in cush return and imbibition% fibre on extraction performance of the milling process. It was concluded from the study that the empirical relations developed for the mill performance parameters in the MILSIM model were not applicable to the new model. New empirical relations have to be developed before the model is applied with confidence. Secondly, a soluble and insoluble solids model was developed using modelling theory and experimental data to track the flow of sucrose (pol), reducing sugars (glucose and fructose), soluble ash, true fibre and mud solids entering the milling train through the cane supply and their distribution in juice and bagasse streams.. The soluble impurities and mud solids in cane affect the performance of the milling train and further processing of juice and bagasse. New mill performance parameters were developed in the model to track the flow of cane components. The developed model is the first of its kind and provides some additional insight regarding the flow of soluble and insoluble cane components and the factors affecting their distribution in juice and bagasse. The model proved to be a good extension to the MILEX model to study the overall performance of the milling train. Thirdly, the developed models were incorporated in a proprietary software package "SysCAD’ for advanced operational efficiency and for availability in the ‘whole of factory’ model. The MILEX model was developed in SysCAD software to represent a single milling unit. Eventually the entire milling train and the juice screen were developed in SysCAD using series of different controllers and features of the software. The models developed in SysCAD can be run from macro enabled excel file and reports can be generated in excel sheets. The flexibility of the software, ease of use and other advantages are described broadly in the relevant chapter. The MILEX model is developed in static mode and dynamic mode. The application of the dynamic mode of the model is still under progress.

Intercultural dance : exploring a Finnish migrant connection with indigenous cultures through dance

This research is a dance-based, autoethnographic study which explores my connection with place as a Savolainen woman born on Kalkadoon country; an Australian-born Finn. Edward Relph states 'the more profoundly inside a place the person feels, the stronger will be his or her identity with that place' (1976, 49). I am interested in how a sense of "place identity" has informed my choreographic practice. Autoethnography is important because it places the research within a lived experience: my insider account of a lived experience within the White Australia Policy through my lens as a first generation Australian-born Finn. It also speaks to the space in-between for those, like me, who feel they do not fit into mainstream identity but look like they do. By exploring my lived experience through dance autoethnography, new understandings of my place identity within a cultural, social and political context have emerged. Ellis and Flaherty state ‘subjectivity is situated such that the voices in our heads and the feelings in our bodies are linked to political, cultural, and historical contexts’ (1992, 4). In order to begin my rehearsal process, I wanted a cultural framework which related to connection with land to guide the research. My investigations led me to the Maori examples of "Tikanga Maori" (Tikanga are the customs and traditions), in particular the "Pepeha" (Introduction) and allowed me to challenge my choreographic practice through this cultural framework.

Ruptures in the heterosexual matrix through teenage flows and multiplicities

This article analyzes a series of stories and artworks that were produced in a collective biography workshop. It explores Judith Butler’s concept of the heterosexual matrix combined with a Deleuzian theoretical framework. The article begins with an overview of Butler’s concept of the heterosexual matrix and her theorizations on how it might be disrupted. It then suggests how a Deleuzian framework offers other tools for analyzing these ruptures at the micro level of girls’ everyday interactions.

Growth of C36-films on diamond surface through molecular dynamics simulation

In this paper, the initial stage of films assembled by energetic C36 fullerenes on diamond (001)–(2 × 1) surface at low-temperature was investigated by molecular dynamics simulation using the Brenner potential. The incident energy was first uniformly distributed within an energy interval 20–50 eV, which was known to be the optimum energy range for chemisorption of single C36 on diamond (001) surface. More than one hundred C36 cages were impacted one after the other onto the diamond surface by randomly selecting their orientation as well as the impact position relative to the surface. The growth of films was found to be in three-dimensional island mode, where the deposited C36 acted as building blocks. The study of film morphology shows that it retains the structure of a free C36 cage, which is consistent with Low Energy Cluster Beam Deposition (LECBD) experiments. The adlayer is composed of many C36-monomers as well as the covalently bonded C36 dimers and trimers which is quite different from that of C20 fullerene-assembled film, where a big polymerlike chain was observed due to the stronger interaction between C20 cages. In addition, the chemisorption probability of C36 fullerenes is decreased with increasing coverage because the interaction between these clusters is weaker than that between the cluster and the surface. When the incident energy is increased to 40–65 eV, the chemisorption probability is found to increased and more dimers and trimers as well as polymerlike-C36 were observed on the deposited films. Furthermore, C36 film also showed high thermal stability even when the temperature was raised to 1500 K.

Wide area control through aggregation of power systems

This thesis was a step forward in improving the stability of power systems by applying new control and modelling techniques. The developed methods use the data obtained from voltage angle measurement devices which are synchronized with GPS signals to stabilize the system and avoid system-wide blackouts in the event of severe faults. New approaches were developed in this research for identifying and estimating reduced dynamic system models using phasor measurement units. The main goal of this research is achieved by integrating the developed methods to obtain a feasible wide-area control system for stabilizing the power systems.

Replacing the watercooler : connecting through enterprise microblogging

This paper, founded within Enterprise 2.0, knowledge management and informed learning theory, outlines the introduction of Yammer, an enterprise microblogging application at CPA Australia. The implementation and adoption process is discussed through usage analysis, and resulting outcomes through user success stories. Lessons learned provide a framework for organisations looking to adopt social networking tools within their own organisational environment.

Multimodality, media, and access to multiliteracies

In many English-speaking countries bilingual and multilingual speakers of English are integrated into mainstream classrooms, where the teacher is expected to help them “catch up” with speakers of the dominant language. In this presentation, I argue that we teach in culturally and linguistically diverse societies that are increasingly interconnected through a broadened range of multimodal and digital textual practices. Intuitively, one might expect that multimodal approaches are more equitable than exclusively print-based approaches because learners can draw from a broader range of semiotic resources. Yet the potentials of using multiple modes and new digital media to provide greater access to multiliteracies cannot be assumed. I draw on a case study of a multilingual language learner, Paweni, a Thai immigrant, describing how she and her peers negotiated cultural and linguistic difference. These encounters occur during multiliteracies lessons involving both print and digital texts. I theorise a “dialectic of access” to explain the reciprocal interaction between the agency of learners, modes, and media. I apply Giddens’ structuration theory to take into account the social structures – domination, signification, and legitimation – that played an important role in this dialectic of access.

Revisiting educational equity and quality in China through confucianism, policy, research, and practice

The promotion of educational equity and improvement of educational quality in China are contextualised in tenets of Confucianism and policy directives, inspiring educational research and practice. In this paper, we first explore the historical and cultural roots of educational equity and quality through Confucianism and elaborate on the current policy priority that aims to address educational equity and quality. We then present an overview of research on equity and quality in Chinese education. Informed by Confucianism, policy, and research, we pose a framework to structure our investigation and analysis of three illustrative examples, namely the Special Post Teacher Plan, amalgamation of rural schools, and schooling of floating children. Drawing insights from Confucianism, policy, research, and practice, we conclude that the promotion of educational equity through high quality provision of education for disadvantaged groups can help to narrow the gap in educational quality currently existing in China.

Exploring intercultural and ethical understanding through ‘Ethical Intelligence’ and drama, in Asian texts for the Australian curriculum : English

This paper focuses on Australian texts with Asian representations, which will be discussed in terms of Ethical Intelligence (Weinstein, 2011) explored through drama. This approach aligns with the architecture of the Australian Curriculum: English (AC:E, v5, 2013); in particular the general capabilities of 'ethical understanding' and 'intercultural understandings.' It also addresses one aspect of the Cross Curriculum Priorities which is to include texts about peoples from Asia. The selected texts not only show the struggles undergone by the authors and protagonists, but also the positive contributions that diverse writers from Asian and Middle Eastern countries have made to Australia.

Memory : (Re)imagining the past through children's literature

There has been a renewal of interest in memory studies in recent years, particularly in the Western world. This chapter considers aspects of personal memory followed by the concept of cultural memory. It then examines how the Australian cultural memory of the Anzac Legend is represented in a number of recent picture books.

Let the journey begin : cultivating student identity and a sense of belonging through a formal academic welcome

Queensland University of Technology [QUT] Caboolture campus is a satellite campus co-located with Brisbane North Institute of TAFE. Building a sense of belonging on-campus continues to be challenging, with anecdotal evidence suggesting that QUT Caboolture students feel like second-class students, isolated from the prestige and excitement of the city campuses. A student identity and fostering a sense of belonging are fundamental to on-campus engagement and have been linked to retention (Field & Morgan-Klein, 2010). A formal welcome ceremony, including an academic procession in full regalia, was a new inclusion for QUT Caboolture’s 2013 Orientation Day. The ritual was intended to be a temporal mark for students to recognise their personal transition and emerging identity as a university student. Cultural capital is one ingredient in a complex mix of interactions and relationships to build a sense of identity. (Ecclestone, Biesta & Hughes, 2010). Fostering a sense of belonging and a connection to the campus and its staff was also anticipated. Students responded positively to the event, reporting feelings of excitement, inspiration and being welcomed into the university culture. The ceremony marked the beginning of the students’ journey together as QUT Caboolture students.

Settling sexual harassment complaints through conciliation : what complaints settle and what complaints don’t?

This paper explores why some complaints of sexual harassment lodged under Australian anti-discrimination laws might settle during the conciliation process while others do not. It draws on an analysis of data collected from files of sexual harassment complaints lodged with all state, territory and federal human rights agencies in the area of employment over a six month period. The analysis suggests that complaints that conform with the stereotypical image of sexual harassment, where a woman is physically sexually harassed by a senior man, are more likely to settle as are complaints where the complainant is in full-time, secure employment and where complainants are not legally represented. However, sustained Australian research, including by human rights agencies, is vital is to further explore these issues.

Moving beyond traditional clinics : creating a new legal clinics through community partnerships

To overcome the challenge of finding placements for large student numbers, QUT has partnered with community organisations to enable students to work on community-based projects addressing a community need. Students work in interdisciplinary teams with the community organisation to resolve issues and identify solutions to suit the organisation and client base. This paper will describe the community engaged learning pedagogy that is employed in the subject and will consider the benefits and challenges to law students of working collaboratively and developing community relationships. Critical appraisal of the legal system and the role of lawyers and analysis of the professional and ethical responsibilities legal practitioners is a focus of the subject. Explicit emphasis is placed on developing a sense of social responsibility and inculcating a pro bono ethos. Students attend workshops on topics such as reflective practice, cultural competencies, client solutions, collaborative practice and ethical obligations. This paper will discuss the challenges in creating the new legal clinic subject, benefits to students and community partners, and the results of initial student evaluation of the subject.

Knowledge transfer through dual degree programs between Australian and Indonesian universities : a case study

While dual degree programs (DDPs) between Australian and Indonesian universities are expected to facilitate knowledge transfer (KT) between the partnering universities, little is known about how and what KT process taking place within DDP partnerships. Using an inter-organisational KT framework, this study investigated Indonesian universities’ rationales and outcomes of establishing DDPs and mechanisms facilitating knowledge transfer between Australian and Indonesian universities. Two Indonesian universities along with their common Australian partner university participated in this case study. Semi-structured interviews were conducted with 27 key university officers and pertinent university documents provided the main data. Both data sources were thematically analysed to identify emerging patterns. The findings suggest that Indonesian universities prioritised developing capacity to improve their international recognition more than the Australian partner. Consequently, the DDPs benefited the Indonesian universities through capacity development made possible by KT from the Australian DDP partners. KT processes occurred in DDP partnerships, particularly through curriculum collaboration, but they were more limited for the managerial area. Factors enabling the KT included both technology-aided and face-to-face communication, intention to acquire knowledge from the partners, capitalising on the unequal power relations to advance KT opportunities, and knowledge management system. The findings of this study suggest the importance of prioritising capacity development in DDP partnerships to enable KT, executing the KT stages to ensure institutionalisation of acquired knowledge into the university’s systems and policies, and maintaining financial sustainability of the DDPs to reach mutually beneficial outcomes between Australian and Indonesian universities.