Studies in offset ink setting

The offset printing process is complex and involves the meeting of two essentially complex materials, printing ink and paper, upon which the final product is formed. It can therefore be expected that a multitude of chemical and physical interactions and mechanisms take place at the ink-paper interface. Interactions between ink and paper are of interest to both the papermakers and ink producers, as they wish to achieve better quality in the final product. The objective of this work is to clarify the combined influence of paper coating structure, printing ink and fountain solution on ink setting and the problems related to ink setting. A further aim is to identify the mechanisms that influence ink setting problems, and to be able to counteract them by changing properties of the coating layer or by changing the properties of the ink. The work carried out for this thesis included use of many techniques ranging from standard paper and printability tests to advanced optical techniques for detection of ink filaments during ink levelling. Modern imaging methods were applied for assessment of ink filament remain sizes and distribution of ink components inside pigment coating layers. Gravimetric filtration method and assessment of print rub using Ink-Surface-Interaction-Tester (ISIT) were utilized to study the influence of ink properties on ink setting. The chemical interactions were observed with the help of modified thin layer chromatography and contact angle measurements using both conventional and high speed imaging. The results of the papers in this thesis link the press operational parameters to filament sizes and show the influence of these parameters to filament size distribution. The relative importance between the press operation parameters was shown to vary. The size distribution of filaments is important in predicting the ink setting behaviour, which was highlighted by the dynamic gloss and ink setting studies. Prediction of ink setting behaviour was also further improved by use of separate permeability factors for different ink types in connection to filtration equations. The roles of ink components were studied in connection to ink absorption and mechanism of print rub. Total solids content and ratio of linseed oil to mineral oil were found to determine the degree of print rub on coated papers. Wax addition improved print rub resistance, but would not decrease print rub as much as lowering the total solids content in the ink. Linseed oil was shown to absorb into pigment coating pores by mechanism of adsorption to pore walls, which highlights the need for sufficient pore surface area for improved chromatographic separation of ink components. These results should help press operators, suppliers of printing presses, papermakers and suppliers to papermakers, to better understand the material and operating conditions of the press as it relates to various print quality issues. Even though paper is in competition with electronic media, high quality printed products are still in demand. The results should provide useful information for this segment of the industry.

Mellom tradisjon og spel : didaktikk for tekstil folkekunst

Denne avhandlinga er resultatet av eit behov for å forske på og utvikle ein didaktikk for tekstilfaget ved Folkekunststudiet, Institutt for folkekultur, Høgskolen i Telemark, Noreg. Studiet med folkekunst som fagfelt er eit relativt ungt studium på høgskolen, som vart etablert i 1984. Problemstillinga i denne avhandlinga er korleis ein kan utvikle ein forskingsbasert didaktikk der dei grunnleggjande prinsippa som særmerkjer den tradisjonelle folkekunsten, vert tekne vare på. I arbeidet med avhandlinga har eg prøvd på å klårgjere problemstillinga ut frå ulike perspektiv. Forskingsarbeidet har fokus på kommunikasjon og arbeidsmåtar i ljos av ulike teoriar. Det er ei hermeneutisk tilnærming som er vald for den didaktiske forståinga. Det fyrste drøftingstemaet har søkjeljos på kommunikasjon og dialog ved vidareføring av tekstil folkekunst. Både estetiske, teoretiske, praktiske og sosiale aspekt er nedfelte i læreplanen for studiet og skal utgjere grunnlaget for kommunikasjon og arbeidsmåtar. I den skapande og kopierande prosessen er det utvikla språklege reiskapar for både den sosiale og den estetiske sida der den teoretiske og praktiske faktoren er integrert. Møte med døme på tekstile tradisjonar så vel som praktisk forming av tekstilar har ført til refleksjon og dialog som involverer kontemplasjon, korrespondens og imaginasjon. Det andre temaet som er drøfta, er vidareføring av tradisjonelt visuelt formspråk. Her er merksemda retta mot kva som har skjedd formalt med ei gruppe tradisjonelle formelement i tekstilar i den institusjonelle vidareføringa over eit lengre tidsperspektiv. Resultatet syner at mange tradisjonelle formelement er borte frå den institusjonelle produksjonen. Formelementa kan ha fått ei meir naturalistisk utforming, eller dei er overførte til andre tradisjonelle tekstilteknikkar enn dei som var utgangspunktet. Rombeforma i den institusjonelle produksjonen er utført i færre variasjonar og kombinasjonar enn i den tradisjonelle produksjonen. Konklusjonen på drøftingstemaet er at spelereglar og spatialitet i høve til den formale komponenten i utvalet med tradisjonelle tekstilar ikkje er vidareført i alle gruppene av institusjonelle produkt. Resultatet kan få innverknad og fylgjer for utforming av ein framtidig didaktikk for faget. Arbeidsmåte og erfaring frå vidareføring av tekstile tradisjonar er det tredje temaet som er drøfta i avhandlinga. Kopiering og skapande prosessar er arbeidsmåtar som er brukte ved studiet i dag, og dei utgjer grunnlag for drøftingar i relasjon til vidareføring og erfaring. Konklusjonen er at i den skapande prosessen korrigerer tradisjonen utforminga, medan i kopiprosessen er eigen stilvilje og improvisering resultat av prosessane. Personar som deltek i prosessane, har sett seg sjølve og si historiske forankring inn i spelet, der visuelt og verbalt språk er resultat av integrasjon av tradisjonar. Dei tre drøftingstemaa utgjer grunnlaget for at didaktikk for folkekunst og tekstil kan bli intersubjektiv forståing av kva ein didaktikk for vidareføring av folkekunst med vekt på tekstil kan vere i utdanninga i dag. Indre og ytre dialog i skapande og kopierande prosessar femner om estetiske, materielle og tekniske faktorar sett i høve til spelereglar, spelerom, spatialitet og samspel i møte med tekstile tradisjonar. Samla utgjer det ein forskingsbasert didaktikk for faget der den overordna intensjonen er samtykke mellom tradisjon og spel.

Generation and Characterization of Knockout Mice and Analysis of Patient Material Demonstrates a Role for Tissue Inhibitor of Metalloproteinases 4 (Timp4) in the Cardiovascular System and Tumor Metastasis

This thesis focuses on tissue inhibitor of metalloproteinases 4 (TIMP4) which is the newest member of a small gene and protein family of four closely related endogenous inhibitors of extracellular matrix (ECM) degrading enzymes. Existing data on TIMP4 suggested that it exhibits a more restricted expression pattern than the other TIMPs with high expression levels in heart, brain, ovary and skeletal muscle. These observations and the fact that the ECM is of special importance to provide the cardiovascular system with structural strength combined with elasticity and distensibility, prompted the present molecular biologic investigation on TIMP4. In the first part of the study the murine Timp4 gene was cloned and characterized in detail. The structure of murine Timp4 genomic locus resembles that in other species and of the other Timps. The highest Timp4 expression was detected in heart, ovary and brain. As the expression pattern of Timp4 gives only limited information about its role in physiology and pathology, Timp4 knockout mice were generated next. The analysis of Timp4 knockout mice revealed that Timp4 deficiency has no obvious effect on the development, growth or fertility of mice. Therefore, Timp4 deficient mice were challenged using available cardiovascular models, i.e. experimental cardiac pressure overload and myocardial infarction. In the former model, Timp4 deficiency was found to be compensated by Timp2 overexpression, whereas in the myocardial infarct model, Timp4 deficiency resulted in increased mortality due to increased susceptibility for cardiac rupture. In the wound healing model, Timp4 deficiency was shown to result in transient retardation of re-epithelialization of cutaneous wounds. Melanoma tumor growth was similar in Timp4 deficient and control mice. Despite of this, lung metastasis of melanoma cells was significantly increased in Timp4 null mice. In an attempt to translate the current findings to patient material, TIMP4 expression was studied in human specimens representing different inflammatory cardiovascular pathologies, i.e. giant cell arteritis, atherosclerotic coronary arteries and heart allografts exhibiting signs of chronic rejection. The results showed that cardiovascular expression of TIMP4 is elevated particularly in areas exhibiting inflammation. The results of the present studies suggest that TIMP4 has a special role in the regulation of tissue repair processes in the heart, and also in healing wounds and metastases. Furthermore, evidence is provided suggesting the usefulness of TIMP4 as a novel systemic marker for vascular inflammation.

Tietojohtamisen esteet organisaatioissa: Case Sanoma Lehtimedia Oy

Tutkimuksen tavoitteena oli selvittää tietoon liittyviä tietojohtamisen esteitä organisaatiossa. Lisäksi selvitettiin, mitä esteitä löytyy organisaatiokulttuurin, johtamisen ja teknologian osalta, mihin tietoprosessiin ja millaiseen tietoon esteet liittyvät. Tutkimuksessa perehdyttiin tietoon, tietojohtamiseen, tietojohtamisen mahdollistajiin ja esteisiin. Tutkimus suoritettiin case-organisaatiossa laadullisena tapaustutkimuksena. Organisaation keskijohdon parissa tehtiin kuusi puolistrukturoitua haastattelua. Aineisto analysoitiin sisällön analyysinä. Suurimmat tietojohtamisen esteet olivat ajan puute ja sisäisen tiedon löytämisen, varastoinnin ja jakamisen puute. Eniten tietojohtamisen esteitä löytyi organisaatiokulttuurista. Esteitä löytyi kaikista tietoprosesseista, kun taas aiemmissa tutkimuksissa ne liittyivät pääosin tiedon jakamiseen. Tiedon löytämisen helpottaminen, kuten tietohakemistojen luominen ja intranetin ”siivoaminen”, tehostaisi työtä. Tärkeän tiedon kartoittaminen, varastointi, tiedon jakaminen sekä ilmapiirin avoimuus voisivat auttaa organisaatiota kohti tehokkaampaa tiedon liikkumista ja asiakaspalvelua.

Memory studies - kohti tutkimusalueen vakiintumista

Teemanumero 2/2011: Media ja menneisyys.

Jeg strikker, derfor er jeg! : læring og identitet i uformelle læringsrum

The dissertation ´I knit, therefore I am!´ Learning and identity in informal space has two main purposes. The first purpose being an investigation of how new value attributions and thinking can generate novel and usable knowledge to the field of craftsmanship, and the second purpose being a display of a different and overlooked philosophical and cultural potential in a reflexive mode of expression, which is able to reflect the normative comprehension of craftsmanship. The dissertation focuses on learning and identity in informal spaces of learning and how it is possible to relate such a learning perspective to crafts training in educational establishments. The empirical foundation of this dissertation is ‘craftivism’. In the dissertation activists from the Nordic countries have been interviewed about what they do when they put up their textile graffiti on lamp posts and house walls. Three research problems are presented: 1) What stories do people who work as crafts activists, tell about ways of relating and methods of action when they make crafts? 2) What do these stories tell about learning and identity? 3) How may the research results influence training and education in craftsmanship? These questions are being asked in order to acquire new knowledge in two aspects; first aspect being knowledge about crafts in relation to techniques, tradition and the objects in crafts, and the second aspect being knowledge about learning and identity in informal spaces of learning. The dissertations theoretical foundation is post structural and sociocultural combined with hermeneutical-inspired qualitative interviews. The author’s position and pre-understanding is subject to discussion in relation to the informant; the performing activist, as the background for both of them is craftsmanship. Starting from cultural studies, it is possible to see the activist subject’s conditions of possibilities in the culture, as the activism of the sub-cultural phenomenon’s craft lights up through a performing approach to the individual’s actions. First the research material has been analysed for events of textile graffiti and possible themes in the events, after which the results have been summarised. Next the research material has been analysed for events about learning and identity due to the author’s wish of comprehending the background of and motivational force in activism. The analysis is divided in main perspectives with different dimensions. The results of the analysis show the activist subject’s construction of an individual who actively takes part in a community by e.g. creating joy, changing the world’s perception of sustainability or by feminizing the public space. By taking crafts over the borders (and away from the class room) crafts become contextualized in a novel fashion thus obtaining an independent status. In this fashion the dissertation writes itself into a new method of comprehending and performing traditional craftsmanship techniques.

Repair of segmental bone defects with fiber-reinforced composite: a study of material development and an animal model on rabbits

The Repair of segmental defects in load-bearing long bones is a challenging task because of the diversity of the load affecting the area; axial, bending, shearing and torsional forces all come together to test the stability/integrity of the bone. The natural biomechanical requirements for bone restorative materials include strength to withstand heavy loads, and adaptivity to conform into a biological environment without disturbing or damaging it. Fiber-reinforced composite (FRC) materials have shown promise, as metals and ceramics have been too rigid, and polymers alone are lacking in strength which is needed for restoration. The versatility of the fiber-reinforced composites also allows tailoring of the composite to meet the multitude of bone properties in the skeleton. The attachment and incorporation of a bone substitute to bone has been advanced by different surface modification methods. Most often this is achieved by the creation of surface texture, which allows bone growth, onto the substitute, creating a mechanical interlocking. Another method is to alter the chemical properties of the surface to create bonding with the bone – for example with a hydroxyapatite (HA) or a bioactive glass (BG) coating. A novel fiber-reinforced composite implant material with a porous surface was developed for bone substitution purposes in load-bearing applications. The material’s biomechanical properties were tailored with unidirectional fiber reinforcement to match the strength of cortical bone. To advance bone growth onto the material, an optimal surface porosity was created by a dissolution process, and an addition of bioactive glass to the material was explored. The effects of dissolution and orientation of the fiber reinforcement were also evaluated for bone-bonding purposes. The Biological response to the implant material was evaluated in a cell culture study to assure the safety of the materials combined. To test the material’s properties in a clinical setting, an animal model was used. A critical-size bone defect in a rabbit’s tibia was used to test the material in a load-bearing application, with short- and long-term follow-up, and a histological evaluation of the incorporation to the host bone. The biomechanical results of the study showed that the material is durable and the tailoring of the properties can be reproduced reliably. The Biological response - ex vivo - to the created surface structure favours the attachment and growth of bone cells, with the additional benefit of bioactive glass appearing on the surface. No toxic reactions to possible agents leaching from the material could be detected in the cell culture study when compared to a nontoxic control material. The mechanical interlocking was enhanced - as expected - with the porosity, whereas the reinforcing fibers protruding from the surface of the implant gave additional strength when tested in a bone-bonding model. Animal experiments verified that the material is capable of withstanding load-bearing conditions in prolonged use without breaking of the material or creating stress shielding effects to the host bone. A Histological examination verified the enhanced incorporation to host bone with an abundance of bone growth onto and over the material. This was achieved with minimal tissue reactions to a foreign body. An FRC implant with surface porosity displays potential in the field of reconstructive surgery, especially regarding large bone defects with high demands on strength and shape retention in load-bearing areas or flat bones such as facial / cranial bones. The benefits of modifying the strength of the material and adjusting the surface properties with fiber reinforcement and bone-bonding additives to meet the requirements of different bone qualities are still to be fully discovered.

Collaborative information behaviour : a case study of two research groups

The aim of the licentiate thesis is to examine researchers' information practices in research groups. The researchers were involved with study communication and media related issues within Social Sciences and Humanities Faculties. The theoretical framework of the study comprises the new holistic models of information seeking (for example: Meho and Tibbo, 2003; Seldén, 1999) and the collective aspects of information behaviour (Prekop, 2002 ; Talja, 2002; Talja and Hansen, 2006). The research questions are: 1. How do scholars seek information in research groups? 2 What kind of collaborative information behaviour occurs in the research groups? The research data was gathered by interviews and observations. Three meetings of a research group at the University of Tampere were observed during the autumn of 2004. The group members and the group leader of the research group were interviewed in the spring of 2005. The research group members and the group leader of a research group at the University of Jyväskylä were interviewed in the autumn of 2005. Altogether, two research group leaders and eight researchers were interviewed. The significance of the research group for information seeking is more important in closeknit research groups than in rather loose research groups. The significance of the research group for information seeking can be at least threefold. First, research group members can inform the group about relevant information resources and potential library or other information services. Second, the research group can to some extent compensate for the information seeking systems of libraries by distributing material and information resources. Third, information seeking can be carried out in collaboration in research groups. The significance of the research group was found to be most important in informing about new information services and marketing library systems. Recommendations from colleagues were often needed to mobilize researchers into using new library services. The significance of colleagues in informing about library services is in line with earlier studies. The present study showed that sometimes information from colleagues was regarded as more important than information distributed directly by the local library. A culture of information sharing, including mutual trust, seemed mainly to be reflected in collaboration and collaborative information seeking in the research groups studied. The timing of the onset of individual research seemed to be related to the information sharing culture and social networks in research groups. The simultaneous onset of the research work by group members seemed to promote the growth of unbiased collaboration, also in information seeking.

Carbon Nanotubes as Material for Supercapacitor Electrodes

Electrochemical double-layer supercapacitors have an intermediate position between rechargeable batteries, which can store high amounts of energy, and dielectric capacitors, which have high output power. Supercapacitors are widely suggested to be used in automobiles (recuperation during braking, facilitate engine starting, electric stabilization of the system), industry (forklifts, elevators), hybrid off-road machinery and also in consumer electronics. Supercapacitor electrodes require highly porous material. Typically, activated carbon is used. Specific surface area of activated carbon is approximately 1000 m2 per gram. Carbon nanotubes represent one of prospective materials. According to numerous studies this material allows to improve the properties of supercapacitors. The task of this Master‘s Thesis was to test multiwalled carbon nanotubes and become confident with the testing methods.

Feasibility studies of the weldability of structural steels used in the offshore environment

The rising demand for oil and gas has made it very necessary for the oil and gas industries to explore the offshore. There is a huge resources which is available in the offshore. The search for oil and gas is faced with greater challenges because of the nature of the marine environment as it poses difficult and harsh conditions for the construction of offshore structures. The major problem of the construction of offshore structure is the ability to produce a sound weld that gives the whole structure the structural integrity needed to withstand the harsh environmental conditions. This research work presents the performance of typical offshore steels with improved weldability. The ability of reducing the carbon content of thermo-mechanically rolled steels down to 0.08% makes it possible to achieve good weldability, toughness and strength for high strength steels used in offshore applications. Importantly, the ideal welding procedure should be strictly followed as recommended. The fabrication process is as important as the welding procedure in achieving a sound weld which is free of weld defects such as hydrogen induced cracking, lamellar tearing and solidification cracking. This research work also considers the corrosion as it affects offshore structure and necessary measures to mitigate the problem caused by corrosion.