INFRARED SPECTRA AND CRYSTAL STRUCTURE OF BIS-(DIMETHOXYLPHOSPHATO) COPPER

The title complex has beep synthesized by the reaction of CaCl2, with trimethyl phosphate. Its Infrared spectra from 4000 to 100 cm(-1) measured. The assignment of acme absorption bands was discussed. It is found that the stretching vibrations of bridge groups O-P-O are divided into two groups according to their bond length. The crystal structure of the complex boa been determined from single crystal K-ray diffraction data. The crystals belong to monoclinic system, space group P2(1)/c with cell parameteras, a = 1,0704(4), b = 0.5093(2), c = 1.9737(6)nm, beta = 96.23(3)degrees, V = 1.0696(6)nm(2), Z = 4, final R = 0.044. Copper ion is coordinated to five Rimester oxygen atoms to form a distorted square pyramid. The adjacent copper ions are connected by symmetric and non-symmetric bridge groups of O-P-O, forming an infinite one-dimensional chain coordination polymer.

SYNTHESIS AND CRYSTAL-STRUCTURE OF K4H2[PMO9V3O40].10H2O

The crystal structure of the title compound was determined from single crystal X-ray diffraction at -90-degrees-C. The complex crystallizes in the tetragonal P4/mnc, Z = 2, a = 12.515(3), c = 17.636(7) angstrom. The structure was solved by Patterson and Fourier techniques and refined by least-squares to R = 0.061 for 788 reflections. The central PO4 is disordered, P-O = 1.54 angstrom, M(M = Mo or V) is 6-coordinate, M-O = 1.62-2.48 angstrom, K is 7-coordinate, K-O = 2.84-3.10 angstrom.

SYNTHESIS AND CRYSTAL-STRUCTURE OF A NEW LANTHANIDE CYCLOOCTATETRAENE COMPLEX (ETA-8-C8H8)ER(MU-ETA-8-C8H8)K(MU-ETA-8-C8H8)ER(MU-ETA-8-C8H8)K(THF)4

The tetranuclear nearly-linear complex (eta-8-C8H8)Er(mu-eta-8-C8H8)K(mu-eta-8-C8H8)Er(mu-eta-8-C8H8)K(THF)4 (THF = tetrahydrofuran) is first synthesised by the reaction of benzylcyclopentadienyl erbium dichloride (PhCH2C5H4)ErCl2.3THF with cyclooctatetraenyl potassium K2C8H8 in 1:1 molar ratio in THF; a single crystal X-ray study has shown that the complex has the tetralayer-sandwich structure and that the adjacent Er3+ and K+ ions are bridged by eta-8-cyclooctatetraenyl group.

STUDY OF BIMETALLIC COMPLEXES OF RARE-EARTH LITHIUM - SYNTHESIS AND CRYSTAL-STRUCTURE OF THE (LACL)DME(MU-2-CL)5(MU-3-CL) (LA.DME)LI(THF)2

The reaction between LaCl_3 and LiCl in THF at room temperature, with hexane as precipitant and glycol dimethyl ether as complexing agent, has been studied. A complex with the composition of (LaCl)DME(μ_2-Cl)_5(μ_3-Cl)(La·DME)Li(THF)_2 has been synthesized, its structure was studied by single crystal X-ray diffraction technique. The diffraction intensities were collected at about —100℃. The complex belongs to the triclinic space group P1 with α=11.123(3), 6=16.564(5), c=8.653(3)A, α=95.16(3), β=...

Hydrothermal synthesis and crystal structure of cluster compound {[Ni(enMe)(2)][SiW12O40]}[Ni(enMe)(2)(H2O)(2)](2) center dot 3H(2)O

the novel One-dimensional chain structure of the title cluster compound was synthesized and characterized by elemental analysis, IR spectra, TGA and X-ray single-crystal diffraction. The title cluster compound crystallized in a monochnic system with space group C2/c, a = 1.2656 nm, b = 2.20656 (4) nm, c =2.26763 (4) nm, beta = 92.078 degrees, V = 6.32852 (16) nm(3), Z = 4, D-c = 3.801 g/cm(3), A = 2.271 mm(-1), F(000) = 6512, R-1= 0.0549, wR(2) = 0.1087. The structure building block of the structure is the polyanion [SiW12O40](6-) with alpha-Keggin structure. The clusters were linked together with one-dimensional infinite chain through [ Ni ( enMe) (2)] (2+) cations. The [ Ni ( enMe) (2) ( H2O) (2)] (2+) cations and water molecules were filled in the structure. The cluster compound was expanded to three-dimensional framework by hydrogen bond interactions among molecules.

Crystal structure and DFT studies of a triazole derivative: 4-(2-hydrobenzylideneamino)-3-(1,2,4-triazol-4-yl-methyl) 1H-1,2,4-triazole-5 (4H)-thione

A novel triazole derivative 4-(2-hydrobenzylideneamino)-3-(1, 2, 4-triazol-4-ylmethyl)-1H-1, 2, 4-triazole-5 (4H)-thione(1) was synthesized and characterized using elemental analysis, MR, and H-1 NMR, and its crystal structure was determined via X-ray single crystal diffraction analysis. Crystal data: monoclinic, P2 (1)/c, a = 0.83335 (9) nm, b = 1. 49777 (16) run, c = 1. 14724 (12) nm, beta = 107. 990 (2)degrees, D = 1. 470 Mg/m(3), and Z = 4. The geometries and the vibrational frequencies were determined using the density functional theory(DFT) method at the B3LYP/6-31G* level. To demonstrate the accuracy of the reaction route of compound 1, one of the important intermediates was also tested using the same method. The structural parameters of the two compounds calculated using the DFT study are close to those of the crystals, and the harmonic vibrations of the two compounds computed via the DFT method are in good agreement with those in the observed IR spectral data. The thermodynamic properties of the title compound were calculated, and the compound shows a good structural stability at normal temperature. The test results of biological activities show that it has a certain bactericidal ability.

Isolation, characterization and crystal structure of natural eremophilenolide from Ligularia sagitta

A new eremophilenolide 1beta, 10beta-epoxy-6beta-acetoxy-3beta-angeloyloxy-8beta-hydrox y-eremophil-7(11)-en-8, 12alpha-olide (1), together with liguhodgsonal (2), esculetin (3) and beta-sitosterol (4), was isolated from the aerial parts of Ligularia sagitta. The structure of the new constituent (1) was elucidated by spectroscopic methods and confirmed by single-crystal X-ray diffraction.

Simulation of Dynamic Operation of a Single-Cylinder Two-Stroke Engine

Presented is a study that expands the body of knowledge on the effect of in-cycle speed fluctuations on performance of small engines. It uses the engine and drivetrain models developed previously by Callahan, et al. (1) to examine a variety of engines. The predicted performance changes due to drivetrain effects are shown in each case, and conclusions are drawn from those results. The single-cylinder, high performance four-stroke engine showed significant changes in predicted performance compared to the prediction with zero speed fluctuation in the model. Measured speed fluctuations from a firing Yamaha YZ426 engine were applied to the simulation in addition to data from a simple free mass model. Both methods predicted similar changes in performance. The multiple-cylinder, high performance two-stroke engine also showed significant changes in performance depending on the firing configuration. With both engines, the change in performance diminished with increasing mean engine speed. The low output, single-cylinder two-stroke engine simulation showed only a negligible change in performance, even with high amplitude speed fluctuations. Because the torque versus engine speed characteristic for the engine was so flat, this was expected. The cross-charged, multi-cylinder two-stroke engine also showed only a negligible change in performance. In this case, the combination of a relatively high inertia rotating assembly and the multiple cylinder firing events within the revolution smoothing the torque pulsations reduced the speed fluctuation amplitude itself.

Rational design of a dual-mode optical and chemical prodrug

Purpose. The purpose of this study is to demonstrate the rational design and behaviour of the first dual mode optical and chemical prodrug, exemplified by an acetyl salicylic acid-based system. Methods. A cyclic 1,4-benzodioxinone prodrug was synthesised by reaction of 3,5-dimethoxybenzoin and acetyl salicoyl chloride with pyridine. After purification by column chromatography and recrystallization, characterization was achieved using infrared and NMR spectroscopies, mass spectrometry, elemental analysis and single crystal X-ray diffraction. Light-triggered drug liberation was characterised via UV-visible spectroscopy following low-power 365 nm irradiation for controlled times. Chemical drug liberation was characterised via UV-visible spectroscopy in pH 5.5 solution. Results. The synthetic method yielded pure prodrug, with full supporting characterisation. Light-triggered drug liberation proceeded at a rate of 8.30 10j2 sj1, while chemical, hydrolytic liberation proceeded independently at 1.89 10j3 sj1. The photochemical and hydrolytic reactions were both quantitative. Conclusions. This study demonstrates the first rational dual-mode optical and chemical prodrug, using acetyl salicylic acid as a model, acting as a paradigm for future dual-mode systems. Photochemical drug liberation proceeds 44 times faster than chemical liberation, suggesting potential use in drug-eluting medical devices where an additional burst of drug is required at the onset of infection.

Nanoscale ferroelectrics machined from single crystals

This paper summarises some of the most recent work that has been done on nanoscale ferroelectrics as a result of a joint collaborative research effort involving groups in Queen's University Belfast, the University of Cambridge and the University of St. Andrews. Attempts have been made to observe fundamental effects of reduced size, and increasing morphological complexity, on ferroelectric behaviour by studying the functional response and domain characteristics in nanoscale single crystal material, whose size and morphology have been defined by Focused Ion Beam (FIB) patterning. This approach to nanoshape fabrication has allowed the following broad statements to be made: (i) in single crystal BaTiO3 sheets, permittivity and phase transition behaviour is not altered from that of bulk material down to a thickness of similar to 75 nm; (ii) in single crystal BaTiO3 sheets and nanowires changes in observed domain morphologies are consistent with large scale continuum modeling.

Thin film capacitor cut from single crystals using focused ion beam milling

The focused ion beam microscope (FIB) has been used to fabricate thin parallel-sided ferroelectric capacitors from single crystals of BaTiO3 and SrTiO3. A series of nano-sized capacitors ranging in thickness from similar to660 nm to similar to300 nm were made. Cross-sectional high resolution transmission electron microscopy (HRTEM) revealed that during capacitor fabrication, the FIB rendered around 20 nm of dielectric at the electrode-dielectric interface amorphous, associated with local gallium impregnation. Such a region would act electrically in series with the single crystal and would presumably have a considerable negative influence on the dielectric properties. However, thermal annealing prior to gold electrodes deposition was found to fully recover the single crystal capacitors and homogenise the gallium profile. The dielectric testing of the STO ultra-thin single crystal capacitors was performed yielding a room temperature dielectric constant of similar to300, as is the case in bulk. Therefore, there was no evidence of a collapse in dielectric constant associated with thin film dimensions.

The Influence of Point Defects and Inhomogeneous Strain on the Functional Behaviour of Thin film Ferroelectrics

An attempt has been made to unequivocally identify the influence that inhomogeneous strain fields, surrounding point defects, have on the functional properties of thin film ferroelectrics. Single crystal thin film lamellae of BaTiO3 have been integrated into capacitor structures, and the functional differences between those annealed in oxygen and those annealed in nitrogen have been mapped. Key features, such as the change in the paraelectric-ferroelectric phase transition from first to second order were noted and found to be consistent with mean field modeling predictions for the effects of inhomogeneous strain. Switching characteristics appeared to be unaffected, suggesting that point defects have a low efficacy in domain wall pinning.

Crystal structure and ab initio calculations of a cyano-carbamimidic acid ethyl ester

The structure of one tautomer (amine form) of cyano-carbamimidic acid ethyl ester or (amino-ethoxy-methylidene)aminoformonitrile (CAS: 13947-84-7) was determined by single crystal X-ray diffraction. Ab initio quantum chemical calculations at the B3LYP, MP2 and G3 levels were performed to investigate the stability and the formation of the different tautomers and conformers. The calculations indicate that the amine form is the more stable tautomer, showing a high degree of election conjugation. The most stable amine conformer located by the calculations corresponds to the crystallized structure. On the contrary, in the less stable imine form, the conjugation is separated by a N2-C2 single bond. (C) 2007 Elsevier B.V. All rights reserved.

Designing ionic liquids with boron cluster anions: alkylpyridinium and imidazolium [nido-C(2)B(9)H(11)] and [closo-CB(11)H(12)] carborane salts

A range of new alkylpyridinium and imidazolium carborane salts with [nido-C2B9H12](-), [closo-CB11H12](-), and [RC2B11H11](-) (R = methyl or butyl) anions have been prepared and characterized by physical and thermal methods, including the solid state structures of five of the salts determined by single crystal X-ray diffraction. The tendency of the salts to form low-melting ionic liquids has been assessed; all the salts studied with [nido-C2B9H12](-) anions melted below 100 degrees C and, significantly, have melting points that are 25-85 degrees C lower than those of the corresponding [closo-CB11H12](-) analogs, demonstrating that a wider range of boron-rich ionic liquid materials can be readily accessed.

1-butyl-3-methylimidazolium 3,5-dinitro-1,2,4-triazolate: a novel ionic liquid containing a rigid, planar energetic anion

The novel ionic liquid, 1-butyl-3-methylimidazolium 3,5-dinitro-1,2,4-triazolate has been synthesized and exhibits an unexpectedly low melting point (35 degreesC) considering the size and shape of the rigid, planar anion; analogous tetraalkylammonium salts (methyl, ethyl and n-butyl) have also been prepared and the tetraethylammonium example was characterized by single crystal X-ray diffraction.