Development of Techniques for the Automatic Extraction and Grade Detection of Glioma Tumors from Conventional Brain Magnetic Resonant Images

Cerebral glioma is the most prevalent primary brain tumor, which are classified broadly into low and high grades according to the degree of malignancy. High grade gliomas are highly malignant which possess a poor prognosis, and the patients survive less than eighteen months after diagnosis. Low grade gliomas are slow growing, least malignant and has better response to therapy. To date, histological grading is used as the standard technique for diagnosis, treatment planning and survival prediction. The main objective of this thesis is to propose novel methods for automatic extraction of low and high grade glioma and other brain tissues, grade detection techniques for glioma using conventional magnetic resonance imaging (MRI) modalities and 3D modelling of glioma from segmented tumor slices in order to assess the growth rate of tumors. Two new methods are developed for extracting tumor regions, of which the second method, named as Adaptive Gray level Algebraic set Segmentation Algorithm (AGASA) can also extract white matter and grey matter from T1 FLAIR an T2 weighted images. The methods were validated with manual Ground truth images, which showed promising results. The developed methods were compared with widely used Fuzzy c-means clustering technique and the robustness of the algorithm with respect to noise is also checked for different noise levels. Image texture can provide significant information on the (ab)normality of tissue, and this thesis expands this idea to tumour texture grading and detection. Based on the thresholds of discriminant first order and gray level cooccurrence matrix based second order statistical features three feature sets were formulated and a decision system was developed for grade detection of glioma from conventional T2 weighted MRI modality.The quantitative performance analysis using ROC curve showed 99.03% accuracy for distinguishing between advanced (aggressive) and early stage (non-aggressive) malignant glioma. The developed brain texture analysis techniques can improve the physician’s ability to detect and analyse pathologies leading to a more reliable diagnosis and treatment of disease. The segmented tumors were also used for volumetric modelling of tumors which can provide an idea of the growth rate of tumor; this can be used for assessing response to therapy and patient prognosis.

Hybrid Background Subtraction in Video using Bi-level CodeBook Model

Detection of Objects in Video is a highly demanding area of research. The Background Subtraction Algorithms can yield better results in Foreground Object Detection. This work presents a Hybrid CodeBook based Background Subtraction to extract the foreground ROI from the background. Codebooks are used to store compressed information by demanding lesser memory usage and high speedy processing. This Hybrid method which uses Block-Based and Pixel-Based Codebooks provide efficient detection results; the high speed processing capability of block based background subtraction as well as high Precision Rate of pixel based background subtraction are exploited to yield an efficient Background Subtraction System. The Block stage produces a coarse foreground area, which is then refined by the Pixel stage. The system’s performance is evaluated with different block sizes and with different block descriptors like 2D-DCT, FFT etc. The Experimental analysis based on statistical measurements yields precision, recall, similarity and F measure of the hybrid system as 88.74%, 91.09%, 81.66% and 89.90% respectively, and thus proves the efficiency of the novel system.

Genetic algorithm based indicator sequence method for exon prediction

Considerable research effort has been devoted in predicting the exon regions of genes. The binary indicator (BI), Electron ion interaction pseudo potential (EIIP), Filter method are some of the methods. All these methods make use of the period three behavior of the exon region. Even though the method suggested in this paper is similar to above mentioned methods , it introduces a set of sequences for mapping the nucleotides selected by applying genetic algorithm and found to be more promising

A semi-automatic method for segmentation and 3D modeling of glioma tumors from brain MRI

This work presents an efficient method for volume rendering of glioma tumors from segmented 2D MRI Datasets with user interactive control, by replacing manual segmentation required in the state of art methods. The most common primary brain tumors are gliomas, evolving from the cerebral supportive cells. For clinical follow-up, the evaluation of the pre- operative tumor volume is essential. Tumor portions were automatically segmented from 2D MR images using morphological filtering techniques. These seg- mented tumor slices were propagated and modeled with the software package. The 3D modeled tumor consists of gray level values of the original image with exact tumor boundary. Axial slices of FLAIR and T2 weighted images were used for extracting tumors. Volumetric assessment of tumor volume with manual segmentation of its outlines is a time-consuming proc- ess and is prone to error. These defects are overcome in this method. Authors verified the performance of our method on several sets of MRI scans. The 3D modeling was also done using segmented 2D slices with the help of a medical software package called 3D DOCTOR for verification purposes. The results were validated with the ground truth models by the Radi- ologist.

Evaluation Of A Novel Method Of Real Time Computer Assisted Spine Surgery

In this paper the effectiveness of a novel method of computer assisted pedicle screw insertion was studied using testing of hypothesis procedure with a sample size of 48. Pattern recognition based on geometric features of markers on the drill has been performed on real time optical video obtained from orthogonally placed CCD cameras. The study reveals the exactness of the calculated position of the drill using navigation based on CT image of the vertebra and real time optical video of the drill. The significance value is 0.424 at 95% confidence level which indicates good precision with a standard mean error of only 0.00724. The virtual vision method is less hazardous to both patient and the surgeon

Automatic Detection and Classification of Glioma Tumors using Statistical Features

The characterization and grading of glioma tumors, via image derived features, for diagnosis, prognosis, and treatment response has been an active research area in medical image computing. This paper presents a novel method for automatic detection and classification of glioma from conventional T2 weighted MR images. Automatic detection of the tumor was established using newly developed method called Adaptive Gray level Algebraic set Segmentation Algorithm (AGASA).Statistical Features were extracted from the detected tumor texture using first order statistics and gray level co-occurrence matrix (GLCM) based second order statistical methods. Statistical significance of the features was determined by t-test and its corresponding p-value. A decision system was developed for the grade detection of glioma using these selected features and its p-value. The detection performance of the decision system was validated using the receiver operating characteristic (ROC) curve. The diagnosis and grading of glioma using this non-invasive method can contribute promising results in medical image computing

Studies on the interaction of two level atoms with quantized electromagnetic field

The present study described about the interaction of a two level atom and squeezed field with time varying frequency. By applying a sinusoidal variation in the frequency of the field, the randomness in population inversion is reduced and the collapses and periodic revivals are regained. Quantum optics is an emerging field in physics which mainly deals with the interaction of atoms with quantised electromagnetic fields. Jaynes-Cummings Model (JCM) is a key model among them, which describes the interaction between a two level atom and a single mode radiation field. Here the study begins with a brief history of light, atom and their interactions. Also discussed the interaction between atoms and electromagnetic fields. The study suggest a method to manipulate the population inversion due to interaction and control the randomness in it, by applying a time dependence on the frequency of the interacting squeezed field.The change in behaviour of the population inversion due to the presence of a phase factor in the applied frequency variation is explained here.This study also describes the interaction between two level atom and electromagnetic field in nonlinear Kerr medium. It deals with atomic and field state evolution in a coupled cavity system. Our results suggest a new method to control and manipulate the population of states in two level atom radiation interaction,which is very essential for quantum information processing.We have also studied the variation of atomic population inversion with time, when a two level atom interacts with light field, where the light field has a sinusoidal frequency variation with a constant phase. In both coherent field and squeezed field cases, the population inversion variation is completely different from the phase zero frequency modulation case. It is observed that in the presence of a non zero phase φ, the population inversion oscillates sinusoidally.Also the collapses and revivals gradually disappears when φ increases from 0 to π/2. When φ = π/2 the evolution of population inversion is identical to the case when a two level atom interacts with a Fock state. Thus, by applying a phase shifted frequency modulation one can induce sinusoidal oscillations of atomic inversion in linear medium, those normally observed in Kerr medium. We noticed that the entanglement between the atom and field can be controlled by varying the period of the field frequency fluctuations. The system has been solved numerically and the behaviour of it for different initial conditions and different susceptibility values are analysed. It is observed that, for weak cavity coupling the effect of susceptibility is minimal. In cases of strong cavity coupling, susceptibility factor modifies the nature in which the probability oscillates with time. Effect of susceptibility on probability of states is closely related to the initial state of the system.

Statistical evaluation of texture analysis from the biocrystallization method

The consumers are becoming more concerned about food quality, especially regarding how, when and where the foods are produced (Haglund et al., 1999; Kahl et al., 2004; Alföldi, et al., 2006). Therefore, during recent years there has been a growing interest in the methods for food quality assessment, especially in the picture-development methods as a complement to traditional chemical analysis of single compounds (Kahl et al., 2006). The biocrystallization as one of the picture-developing method is based on the crystallographic phenomenon that when crystallizing aqueous solutions of dihydrate CuCl2 with adding of organic solutions, originating, e.g., from crop samples, biocrystallograms are generated with reproducible crystal patterns (Kleber & Steinike-Hartung, 1959). Its output is a crystal pattern on glass plates from which different variables (numbers) can be calculated by using image analysis. However, there is a lack of a standardized evaluation method to quantify the morphological features of the biocrystallogram image. Therefore, the main sakes of this research are (1) to optimize an existing statistical model in order to describe all the effects that contribute to the experiment, (2) to investigate the effect of image parameters on the texture analysis of the biocrystallogram images, i.e., region of interest (ROI), color transformation and histogram matching on samples from the project 020E170/F financed by the Federal Ministry of Food, Agriculture and Consumer Protection(BMELV).The samples are wheat and carrots from controlled field and farm trials, (3) to consider the strongest effect of texture parameter with the visual evaluation criteria that have been developed by a group of researcher (University of Kassel, Germany; Louis Bolk Institute (LBI), Netherlands and Biodynamic Research Association Denmark (BRAD), Denmark) in order to clarify how the relation of the texture parameter and visual characteristics on an image is. The refined statistical model was accomplished by using a lme model with repeated measurements via crossed effects, programmed in R (version 2.1.0). The validity of the F and P values is checked against the SAS program. While getting from the ANOVA the same F values, the P values are bigger in R because of the more conservative approach. The refined model is calculating more significant P values. The optimization of the image analysis is dealing with the following parameters: ROI(Region of Interest which is the area around the geometrical center), color transformation (calculation of the 1 dimensional gray level value out of the three dimensional color information of the scanned picture, which is necessary for the texture analysis), histogram matching (normalization of the histogram of the picture to enhance the contrast and to minimize the errors from lighting conditions). The samples were wheat from DOC trial with 4 field replicates for the years 2003 and 2005, “market samples”(organic and conventional neighbors with the same variety) for 2004 and 2005, carrot where the samples were obtained from the University of Kassel (2 varieties, 2 nitrogen treatments) for the years 2004, 2005, 2006 and “market samples” of carrot for the years 2004 and 2005. The criterion for the optimization was repeatability of the differentiation of the samples over the different harvest(years). For different samples different ROIs were found, which reflect the different pictures. The best color transformation that shows efficiently differentiation is relied on gray scale, i.e., equal color transformation. The second dimension of the color transformation only appeared in some years for the effect of color wavelength(hue) for carrot treated with different nitrate fertilizer levels. The best histogram matching is the Gaussian distribution. The approach was to find a connection between the variables from textural image analysis with the different visual criteria. The relation between the texture parameters and visual evaluation criteria was limited to the carrot samples, especially, as it could be well differentiated by the texture analysis. It was possible to connect groups of variables of the texture analysis with groups of criteria from the visual evaluation. These selected variables were able to differentiate the samples but not able to classify the samples according to the treatment. Contrarily, in case of visual criteria which describe the picture as a whole there is a classification in 80% of the sample cases possible. Herewith, it clearly can find the limits of the single variable approach of the image analysis (texture analysis).

Influence of the buffer environment on the Relative Biological Effectiveness of carbon ion radiation, investigated by Scanning Force Microscopy and gel electrophoresis

This work focuses on the analysis of the influence of environment on the relative biological effectiveness (RBE) of carbon ions on molecular level. Due to the high relevance of RBE for medical applications, such as tumor therapy, and radiation protection in space, DNA damages have been investigated in order to understand the biological efficiency of heavy ion radiation. The contribution of this study to the radiobiology research consists in the analysis of plasmid DNA damages induced by carbon ion radiation in biochemical buffer environments, as well as in the calculation of the RBE of carbon ions on DNA level by mean of scanning force microscopy (SFM). In order to study the DNA damages, besides the common electrophoresis method, a new approach has been developed by using SFM. The latter method allows direct visualisation and measurement of individual DNA fragments with an accuracy of several nanometres. In addition, comparison of the results obtained by SFM and agarose gel electrophoresis methods has been performed in the present study. Sparsely ionising radiation, such as X-rays, and densely ionising radiation, such as carbon ions, have been used to irradiate plasmid DNA in trishydroxymethylaminomethane (Tris buffer) and 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES buffer) environments. These buffer environments exhibit different scavenging capacities for hydroxyl radical (HO0), which is produced by ionisation of water and plays the major role in the indirect DNA damage processes. Fragment distributions have been measured by SFM over a large length range, and as expected, a significantly higher degree of DNA damages was observed for increasing dose. Also a higher amount of double-strand breaks (DSBs) was observed after irradiation with carbon ions compared to X-ray irradiation. The results obtained from SFM measurements show that both types of radiation induce multiple fragmentation of the plasmid DNA in the dose range from D = 250 Gy to D = 1500 Gy. Using Tris environments at two different concentrations, a decrease of the relative biological effectiveness with the rise of Tris concentration was observed. This demonstrates the radioprotective behavior of the Tris buffer solution. In contrast, a lower scavenging capacity for all other free radicals and ions, produced by the ionisation of water, was registered in the case of HEPES buffer compared to Tris solution. This is reflected in the higher RBE values deduced from SFM and gel electrophoresis measurements after irradiation of the plasmid DNA in 20 mM HEPES environment compared to 92 mM Tris solution. These results show that HEPES and Tris environments play a major role on preventing the indirect DNA damages induced by ionising radiation and on the relative biological effectiveness of heavy ion radiation. In general, the RBE calculated from the SFM measurements presents higher values compared to gel electrophoresis data, for plasmids irradiated in all environments. Using a large set of data, obtained from the SFM measurements, it was possible to calculate the survive rate over a larger range, from 88% to 98%, while for gel electrophoresis measurements the survive rates have been calculated only for values between 96% and 99%. While the gel electrophoresis measurements provide information only about the percentage of plasmids DNA that suffered a single DSB, SFM can count the small plasmid fragments produced by multiple DSBs induced in a single plasmid. Consequently, SFM generates more detailed information regarding the amount of the induced DSBs compared to gel electrophoresis, and therefore, RBE can be calculated with more accuracy. Thus, SFM has been proven to be a more precise method to characterize on molecular level the DNA damage induced by ionizing radiations.

Einfluß der Gewässerversauerung auf Hyporheos und Bryorheos: Untersuchungen an zwei Waldbächen im Westharz

Im Rahmen der Fallstudie Harz sollte an der Schnittstelle zwischen Grundlagenforschung und angewandter Forschung ein Beitrag zur Klärung der Frage geleistet werden, inwieweit zwei Zuläufe der Sösetalsperre im Westharz versauert bzw. versauerungsgefährdet sind; aus diesem Stausee wird Trinkwasser für mehrere Gemeinden in Norddeutschland gewonnen. Die Belastung des fast vollständig bewaldeten Einzugsgebiets der Sösetalsperre mit luftbürtigen Schadstoffen (Saurer Regen) zählte zu den höchsten in Mitteleuropa. An jeweils drei Untersuchungsstellen der beiden Bäche Alte Riefensbeek (R1 bis R3) und Große Söse (S1 bis S3) wurden zwischen März 1987 und November 1988 Proben aus Moospolstern und dem hyporheischen Interstitial entnommen und physikalisch, chemisch und biologisch untersucht. Ergänzend wurden Wasserproben zwischen März 1986 und Oktober 1991 sowie vom April 1998 ebenso wie qualitative Fänge von Makroinvertebraten zwischen November 1986 und Juli 1990 sowie vom April 1998 ausgewertet. Die Analyse der tierischen Besiedlung der Moos- und Interstitialproben beschränkte sich auf die taxonomischen Gruppen Turbellaria (Strudelwürmer), Mollusca (Weichtiere), Amphipoda (Flohkrebse), Ephemeroptera (Eintagsfliegen), Plecoptera (Steinfliegen), Heteroptera (Wanzen), Megaloptera (Schlammfliegen), Coleoptera (Käfer), Trichoptera (Köcherfliegen) und Diptera (Zweiflügler). Der Grundsatz, daß normalverteilte und nicht normalverteilte Daten statistisch unterschiedlich behandelt werden müssen, wurde konsequent angewandt. Am Beispiel der Choriotopstruktur wurde gezeigt, daß die Auswahl des Analyseverfahrens das Ergebnis der ökologischen Interpretation multivariater statistischer Auswertung beeinflußt. Die Daten der Korngrößen-Verteilung wurden vergleichend einer univariaten und einer multivariaten statistischen Analyse unterworfen. Mit dem univariaten Verfahren wurden die Gradienten der ökologisch relevanten Korngrößen-Parameter eher erkannt als mit dem multivariaten Verfahren. Die Auswirkungen von Gewässerversauerung sowie anderer Umweltfaktoren (insgesamt 42 Faktoren) auf die Lebensgemeinschaften wurden anhand der Parameter Artenzahl, Besiedlungsdichte, Körpergröße und Biomasse untersucht. Abundanz, Biomasse und Körpergröße sowie die Umweltfaktoren wurden auf einem horizontalen Gradienten, d.h. im Längslauf der Bäche, und auf einem vertikalen Gradienten, d.h. fließende Welle / Bryorheon / Benthon versus Hyporheon, untersucht. Es wurde ein terminologisches System für die Kompartimente in der Fließgewässer-Aue vorgeschlagen, das in sich einheitlich ist. Es wurde ein neuer Moos-Vitalitätsindex für die Moospolster vorgestellt. Es wurden Bestimmungsschlüssel für die Larven der Chloroperlidae (Steinfliegen-Familie) und der Empididae (Tanzfliegen) in den beiden Harzbächen entwickelt. Die untersuchten Bachstrecken waren frei von Abwasserbelastung. An zwei Stellen wurde Wasser für einen Forellenteich ausgeleitet. Abgesehen von zwei meterhohen Abstürzen in der Großen Söse waren wasserbauliche Veränderungen ohne große Bedeutung. Das Abfluß-Regime war insofern nicht mehr natürlich, als beide Bäche in das System der bergbaulichen Bewässerungsgräben des Oberharzes eingebunden sind. Die Söse hatte ein F-nivopluviales Abfluß-Regime, der abflußreichste Doppelmonat war der März / April, die Unregelmäßigkeit des Abfluß-Regimes war sehr hoch, die Vorhersagbarkeit sehr niedrig, die monatlichen Abfluß-Maxima wiesen eine sehr geringe Konstanz auf. Der Zeitraum der biologischen Probenahme wurde von überdurchschnittlich vielen Tagen mit mäßig erhöhten Abflüssen geprägt, sehr große Hochwasser-Wellen fehlten aber. Die Abfluß-Dynamik wurde statistisch beschrieben. Das hydraulische Regime wurde anhand der Meßgrößen Fließgeschwindigkeit, Fließkraft und FROUDE-Zahl dargestellt. Der Zusammenhang zwischen Abfluß und Fließgeschwindigkeit auf der einen Seite und der Korngrößen-Verteilung auf der anderen Seite wurde statistisch untersucht, ebenfalls zwischen dem Abfluß und dem Kohlenstoff- und Stickstoff-Gehalt der Feinstpartikel sowie dem Wasserchemismus. In den Phasen ohne Hochwasser hatte das Hyporheal die Funktion einer Senke für Feinstkörner. Das Bachbett der Alten Riefensbeek war stabiler als das der Großen Söse. Insgesamt gesehen war das hyporheische Sediment in den quellnahen Abschnitten grobkörniger und auf den quellfernen Strecken feinkörniger. Der prozentuale Anteil der Feinstkörner im Hyporheal und Benthal nahm aber im Längslauf der Bäche ab. Dies ist ungewöhnlich, konnte aber nicht plausibel mit geologischen und hydrologischen Meßgrößen erklärt werden. Beide Bäche waren sommerkalt. Der Einfluß der Wassertemperatur auf die Larvalentwicklung wurde beispielhaft an den Taxa Baetis spp. und Leuctra gr. inermis untersucht. Es gab eine Tendenz, daß der Kohlenstoff- und Stickstoff-Gehalt der Feinstpartikel vom Benthal in das Hyporheal anstieg. Dies war ein weiterer Hinweis darauf, daß das Hyporheal die Funktion einer Senke und Vorratskammer für Nährstoffe hat. Der Zusammenhang zwischen partikulärer und gelöster Kohlenstoff-Fraktion wurde diskutiert. Im Hyporheon war die Nitrifikation nicht stärker als in der fließenden Welle. Es gab Hinweise, daß die sauren pH-Werte in der Großen Söse die Nitrifikation hemmten. Die Valenzen der Moos- und Tier-Taxa bezüglich Fließgeschwindigkeit, pH-Wert, Alkalinität sowie der Gehalte von Sauerstoff, Calcium, Magnesium, Kalium und Natrium wurden zusammengestellt. Das hyporheische Sediment war sehr grob und hatte eine hohe Porosität. Der Austausch zwischen fließender Welle und hyporheischem Wasser konnte deshalb sehr schnell erfolgen, es gab keine intergranulare Sprungschicht, die physikalischen und chemischen Tiefengradienten waren in den meisten Fällen gar nicht ausgeprägt oder nur sehr flach. Die Wassertemperatur des Freiwassers unterschied sich nicht signifikant von derjenigen im hyporheischen Wasser. Es gab -- von wenigen Ausnahmen bei pH-Wert, Leitfähigkeit und Sauerstoffgehalt abgesehen -- keine signifikanten Unterschiede zwischen dem Wasserchemismus der fließenden Welle und dem des Hyporheals. Die physikalischen und chemischen Voraussetzungen für die Refugialfunktion des Hyporheons waren deshalb für versauerungsempfindliche Taxa nicht gegeben. In der Tiefenverteilung der untersuchten Tiergruppen im Hyporheal lag das Maximum der Abundanz bzw. Biomasse häufiger in 10 cm als in 30 cm Tiefe. Daraus läßt sich aber keine allgemeine Gesetzmäßigkeit ableiten. Es wurde durchgehend die Definition angewendet, daß die Gewässerversauerung durch den Verlust an Pufferkapazität charakterisiert ist. Saure Gewässer können, müssen aber nicht versauert sein; versauerte Gewässer können, müssen aber nicht saures Wasser haben. Maßstab für das Pufferungsvermögen eines Gewässers ist nicht der pH-Wert, sondern sind die Alkalinität und andere chemische Versauerungsparameter. Der pH-Wert war auch operativ nicht als Indikator für Gewässerversauerung anwendbar. Die chemische Qualität des Bachwassers der Großen Söse entsprach aufgrund der Versauerung nicht den umweltrechtlichen Vorgaben bezüglich der Parameter pH-Wert, Aluminium, Eisen und Mangan, bzgl. Zink galt dies nur an S1. In der Alten Riefensbeek genügte das Hyporheal-Wasser in 30 cm Tiefe an R2 bzgl. des Sauerstoff-Gehalts nicht den umweltrechtlichen Anforderungen. Nur im Freiwasser an R1 genügten die Ammonium-Werte den Vorgaben der EG-Fischgewässer-Richtlinie, der Grenzwert wurde an allen anderen Meßstellen und Entnahmetiefen überschritten. Das BSB-Regime in allen Entnahmetiefen an R2, im Freiwasser an R3 und S1, im Hyporheal an R1 sowie in 30 cm Tiefe an R3 genügte nicht den Anforderungen der Fischgewässer-Richtlinie. Der Grenzwert für Gesamt-Phosphor wurde an S3 überschritten. In der Großen Söse war der Aluminium-Gehalt so hoch, daß anorganisches und organisches Aluminium unterschieden werden konnten. Besonders hohe Gehalte an toxischem anorganischen Aluminium wurden an Tagen mit Spitzen-Abflüssen und Versauerungsschüben gemessen. Erst die Ermittlung verschiedener chemischer Versauerungsparameter zeigte, daß auch die alkalischen Probestellen R2 und R3 mindestens versauerungsempfindlich waren. Die Messung bzw. Berechnung von chemischen Versauerungsparametern sollte deshalb zum Routineprogramm bei der Untersuchung von Gewässerversauerung gehören. Zu Beginn des Untersuchungsprogramms war angenommen worden, daß die mittleren und unteren Abschnitte der Alten Riefensbeek unversauert sind. Dieser Ansatz des Untersuchungsprogramms, einen unversauerten Referenzbach (Alte Riefensbeek) mit einem versauerten Bach (Große Söse) zu vergleichen, mußte nach der Berechnung von chemischen Versauerungsindikatoren sowie der Analyse der Abundanz- und Biomasse-Werte modifiziert werden. Es gab einen Versauerungsgradienten entlang der Probestellen: R1 (unversauert) R2 und R3 (versauerungsempfindlich bis episodisch leicht versauert) S2 und S3 (dauerhaft versauert) S1 (dauerhaft stark versauert). An S1 war das Hydrogencarbonat-Puffersystem vollständig, an S2 und S3 zeitweise ausgefallen. Die Versauerungslage an R2 und R3 war also schlechter als vorausgesehen. Unterschiede im Versauerungsgrad zwischen den Meßstellen waren nicht so sehr in unterschiedlichen Eintragsraten von versauernden Stoffen aus der Luft begründet, sondern in unterschiedlichen Grundgesteinen mit unterschiedlichem Puffervermögen. Der Anteil der verschiedenen sauren Anionen an der Versauerung wurde untersucht, die chemischen Versauerungsmechanismen wurden mit Hilfe von Ionenbilanzen und verschiedenen Versauerungsquotienten analysiert. Die beiden untersuchten Bäche waren von anthropogener Versauerung betroffen. Dabei spielte die Schwefel-Deposition (Sulfat) eine größere Rolle als die Stickstoff-Deposition (Nitrat). Die Probestelle S1 war immer schon in unbekanntem Maß natürlich sauer. Dieser natürlich saure Zustand wurde von der hinzugekommenen anthropogenen Versauerung bei weitem überragt. Die wenigen gewässerökologischen Daten, die im Wassereinzugsgebiet der Söse vor 1986 gewonnen wurden, deuten darauf hin, daß die Versauerung in den 70er und in der ersten Hälfte der 80er Jahre vom Boden und Gestein in die Bäche durchgeschlagen war. Dieser Versauerungsprozeß begann vermutlich vor 1973 in den Quellen auf dem Acker-Bruchberg und bewegte sich im Laufe der Jahre immer weiter talwärts in Richtung Trinkwasser-Talsperre. Der Mangel an (historischen) freilandökologischen Grundlagendaten war nicht nur im Untersuchungsgebiet, sondern ist allgemein in der Versauerungsforschung ein Problem. Wenn sich das Vorkommen von nah verwandten Arten (weitgehend) ausschließt, kann dies an der Versauerung liegen, z.B. war die Alte Riefensbeek ein Gammarus-Bach, die Große Söse ein Niphargus-Bach; dieses muß aber nicht an der Versauerung liegen, z.B. fehlte Habroleptoides confusa im Hyporheos an R3, Habrophlebia lauta hatte dagegen ihr Abundanz- und Biomasse-Maximum an R3. Zugleich lag das Maximum des prozentualen Anteils von Grobsand an R3, eine mögliche Ursache für diese interspezifische Konkurrenz. Die biologische Indikation von Gewässerversauerung mit Hilfe der Säurezustandsklassen funktionierte nicht in den beiden Harzbächen. Es wurde deshalb ein biologischer Versauerungsindex vorgeschlagen; dieser wurde nicht am pH-Wert kalibriert, sondern an der chemischen Versauerungslage, gekennzeichnet durch die Alkalinität und andere chemische Meßgrößen der Versauerung. Dafür wurden aufgrund der qualitativen und quantitativen Daten die häufigeren Taxa in die vier Klassen deutlich versauerungsempfindlich, mäßig versauerungsempfindlich, mäßig versauerungstolerant und deutlich versauerungstolerant eingeteilt. Es reicht nicht aus, die biologischen Folgen von Gewässerversauerung sowie Veränderungen in der Nährstoff-Verfügbarkeit und im sonstigen Wasserchemismus nur anhand der Artenzahl oder des Artenspektrums abzuschätzen. Vielmehr müssen quantitative Methoden wie die Ermittlung der Abundanzen angewandt werden, um anthropogene und natürliche Störungen des Ökosystems zu erfassen. Es wurde eine Strategie für die behördliche Gewässergüteüberwachung von Bachoberläufen vorgeschlagen, die flächendeckend die Versauerungsgefährdung erfassen kann. Die Auswirkungen der zeitlichen Dynamik des Versauerungschemismus wurden am Beispiel des versauerungsempfindlichen Taxons Baetis spp. (Eintagsfliegen) dargestellt. An S2 und S3 kam es zu starken Versauerungsschüben. Baetis konnte sich nicht ganzjährig halten, sondern nur in versauerungsarmen Phasen im Sommer und im Herbst; es gab einen Besiedlungskreislauf aus Ausrottungs- und Wiederbesiedlungsphasen. Die temporäre Population von Baetis an S2 und S3 bestand nur aus ersten Larvenstadien. Die Probestellen wurden auf horizontalen Gradienten der Umweltfaktoren angeordnet. Bei einigen Parametern gab es keinen Gradienten (z.B. Sauerstoff-Gehalt), bei anderen Parametern waren die Meßstellen auf sehr flachen Gradienten angeordnet (z.B. C:N-Quotient der Feinstkörner), bei den restlichen Meßgrößen waren die Gradienten sehr deutlich (z.B. Alkalinität). Bei den Längsgradienten von Abundanz und Biomasse waren alle Möglichkeiten vertreten: Zunahme (z.B. Leuctra pseudosignifera), Abnahme (z.B. Gammarus pulex), Maximum an der mittleren Probestelle (z.B. Leuctra pseudocingulata) und kein signifikanter Trend (z.B. Nemoura spp.). Abundanz und Biomasse zahlreicher taxonomischer Einheiten hatten ihr Maximum im Längslauf an den quellnächsten Probestellen R1 und S1, z.B. Protonemura spp. und Plectrocnemia spp. Die Lebensgemeinschaften an R1 und S1 waren allerdings völlig unterschiedlich zusammengesetzt. Die häufig vertretene Annahme, versauerte Gewässer seien biologisch tot, ist falsch. Unter Anwendung des 3. biozönotischen Grundprinzips wurde das Maximum von Abundanz und Biomasse in den quellnahen Abschnitten mit dem eustatistischen (stabilen) Regime von Wassertemperatur, Abfluß und Protonen-Gehalt, in der Alten Riefensbeek auch von Alkalinität und ALMER-Relation erklärt. Aufgrund der natürlichen und anthropogenen Störungen war im Längslauf der untersuchten Bäche keine natürliche biozönotische Gliederung des Artenbestands erkennbar. Die Korrelationsberechnungen zwischen den Umweltfaktoren und der Taxazahl ergaben, daß in erster Linie versauerungsrelevante Parameter -- Gehalte saurer Anionen, basischer Kationen und von Metallen, Alkalinität usw. -- die höchsten Korrelationskoeffizienten mit der Taxa-Zahl hatten; unter den natürlichen Meßgrößen zählten nur die Gehalte von DOC und TIC sowie der Anteil der Sande zu der Gruppe mit den höchsten Korrelationskoeffizienten. Die Korrelationsberechnungen zwischen den Umweltfaktoren und den Abundanzen ergab dagegen, daß die quantitative Zusammensetzung der Lebensgemeinschaft nicht nur durch die anthropogene Gewässerversauerung, sondern mindestens genauso durch einige natürliche Meßgrößen beeinflußt wurde. Es gab in den Harzbächen keinen ökologischen Superfaktor, der die quantitative Zusammensetzung der Lebensgemeinschaft überwiegend bestimmte. Auch die Meßgrößen der anthropogenen Gewässerversauerung waren nicht solch ein Superfaktor. Einen ähnlich hohen Einfluß auf die quantitative Zusammensetzung der Lebensgemeinschaft hatten die geologisch bestimmten Umweltfaktoren Leitfähigkeit und TIC-Gehalt, der von der Landnutzung bestimmte DOC-Gehalt sowie der Chlorid-Gehalt, der geologisch, möglicherweise aber auch durch den Eintrag von Straßensalz bestimmt wird. Die Mischung von anthropogenen und natürlichen Faktoren wurde in einem Modell der Wirkung von abiotischen Faktoren auf Bryorheos und Hyporheos dargestellt. Als Beispiel für die zeitliche Nutzung ökologischer Nischen wurde die Verteilung der Larven und Adulten der Dryopidae (Hakenkäfer) im Hyporheos und Bryorheos untersucht. Die Larven wurden vorzugsweise im Hyporheon, die Adulten im Bryorheon angetroffen. Die untersuchten Taxa wurden in die Varianten bryorheobiont, bryorheophil, bryorheotolerant, bryorheoxen und bryorheophob bzw. hyporheobiont, hyporheophil, hyporheotolerant, hyporheoxen und hyporheophob eingeteilt, um ihre räumliche Nutzung ökologischer Nischen zu beschreiben. Die gängige Lehrmeinung, daß das Hyporheon die Kinderstube benthaler Makroinvertebraten ist, konnte für zahlreiche Taxa bestätigt werden (z.B. Habrophlebia lauta). Für die bryorheophilen Taxa (z.B. Gammarus pulex und Baetis spp.) trifft diese Lehrmeinung in den beiden Harzbächen nicht zu. Vielmehr übernimmt das Bryorheon die Funktion einer Kinderstube. Die Larven von Plectrocnemia conspersa / geniculata sowie von Baetis spp. und Amphinemura spp. / Protonemura spp. neben Gammarus pulex zeigten eine Habitatbindung, die erstgenannte Gattung an das Hyporheal, die letztgenannten 3 Taxa an untergetauchte Moospolster (Bryorheal). Die Idee von der Funktion des Hyporheals als Kinderstube der Larven und Jungtiere, als Schutzraum gegen die Verdriftung durch Strömung und vor Fraßdruck durch Räuber sowie als Ort hohen Nahrungsangebots mußte für die letztgenannten 3 Taxa abgelehnt werden. Für sie übernahm das Bryorheal diese Aufgaben. Zwar waren die beiden Bäche oligotroph und die Nahrungsqualität der Feinstkörner im Hyporheal war niedrig. Die Abundanz- und Biomasse-Werte im Bryorheos und Hyporheos gehörten aber zu den weltweit höchsten. Es wurde das Paradoxon diskutiert, daß im Hyporheon der beiden Bäche Diatomeen-Rasen gefunden wurden, obwohl das Hyporheon lichtlos sein soll. Das Hyporheon wurde als ein Ökoton zwischen Benthon / Rheon und Stygon angesehen. Es wurden vier Haupttypen des Hyporheons beschrieben. Wegen des sehr unterschiedlichen Charakters des Hyporheons in verschiedenen Fließgewässern gibt es keinen einheitlichen Satz von abiotischen und biotischen Faktoren, mit denen das Hyporheon vom Benthon und Stygon abgegrenzt werden kann. In den beiden Harzbächen ähnelte das Hyporheon mehr dem Benthon als dem Stygon. Es konnte nicht anhand der chemischen Meßgrößen vom Benthon abgegrenzt werden, sondern anhand der physikalischen Meßgrößen Trübung und der Anteile von Feinsand und Schluffe/Tone sowie anhand der biologischen Parameter Summen-Abundanz und Summen-Biomasse. Aus der Typologie des Hyporheons folgt, daß ein bestimmtes Hyporheon nicht alle in der Literatur beschriebenen Funktionen innerhalb der Fließgewässer-Aue übernehmen kann. Es wurde ein Schema entwickelt, mit dem sich die optimale Liste der Parameter für die Untersuchung eines bestimmten Hyporheons auswählen läßt. Der Tendenz in der Fließgewässer-Ökologie, immer neue Konzepte zu entwickeln, die allgemeingültig sein sollen, wurde das Konzept vom individuellen Charakter von Fließgewässer-Ökosystemen entgegengestellt.

Solution of the Hartree-Fock equations for atoms and diatomic molecules with the finite element method

The finite element method (FEM) is now developed to solve two-dimensional Hartree-Fock (HF) equations for atoms and diatomic molecules. The method and its implementation is described and results are presented for the atoms Be, Ne and Ar as well as the diatomic molecules LiH, BH, N_2 and CO as examples. Total energies and eigenvalues calculated with the FEM on the HF-level are compared with results obtained with the numerical standard methods used for the solution of the one dimensional HF equations for atoms and for diatomic molecules with the traditional LCAO quantum chemical methods and the newly developed finite difference method on the HF-level. In general the accuracy increases from the LCAO - to the finite difference - to the finite element method.

Systematics and evolution of the genus Deuterocohnia Mez (Bromeliaceae)

The present study investigates the systematics and evolution of the Neotropical genus Deuterocohnia Mez (Bromeliaceae). It provides a comprehensive taxonomic revision as well as phylogenetic analyses based on chloroplast and nuclear DNA sequences and presents a hypothesis on the evolution of the genus. A broad morphological, anatomical, biogeographical and ecological overview of the genus is given in the first part of the study. For morphological character assessment more than 700 herbarium specimens from 39 herbaria as well as living plant material in the field and in the living collections of botanical gardens were carefully examined. The arid habitats, in which the species of Deuterocohnia grow, are reflected by the morphological and anatomical characters of the species. Important characters for species delimitation were identified, like the length of the inflorescence, the branching order, the density of flowers on partial inflorescences, the relation of the length of the primary bracts to that of the partial inflorescence, the sizes of floral bracts, sepals and petals, flower colour, the presence or absence of a pedicel, the curvature of the stamina and the petals during anthesis. After scrutinizing the nomenclatural history of the taxa belonging to Deuterocohnia – including the 1992 syonymized genus Abromeitiella – 17 species, 4 subspecies and 4 varieties are accepted in the present revision. Taxonomic changes were made in the following cases: (I) New combinations: A. abstrusa (A. Cast.) N. Schütz is re-established – as defined by Castellanos (1931) – and transfered to D. abstrusa; D. brevifolia (Griseb.) M.A. Spencer & L.B. Sm. includes accessions of the former D. lorentziana (Mez) M.A. Spencer & L.B. Sm., which are not assigned to D. abstrusa; D. bracteosa W. Till is synonymized to D. strobilifera Mez; D. meziana Kuntze ex Mez var. carmineo-viridiflora Rauh is classified as a subspecies of D. meziana (ssp. carmineo-viridiflora (Rauh) N. Schütz); D. pedicellata W. Till is classified as a subspecies of D. meziana (ssp. pedicellata (W. Till) N. Schütz); D. scapigera (Rauh & L. Hrom.) M.A. Spencer & L.B. Sm ssp. sanctae-crucis R. Vásquez & Ibisch is classified as a species (D. sanctae-crucis (R. Vásquez & Ibisch) N. Schütz); (II) New taxa: a new subspecies of D. meziana Kuntze ex Mez is established; a new variety of D. scapigera is established; (the new taxa will be validly published elsewhere); (III) New type: an epitype for D. longipetala was chosen. All other species were kept according to Spencer and Smith (1992) or – in the case of more recently described species – according to the protologue. Beside the nomenclatural notes and the detailed descriptions, information on distribution, habitat and ecology, etymology and taxonomic delimitation is provided for the genus and for each of its species. An key was constructed for the identification of currently accepted species, subspecies and varieties. The key is based on easily detectable morphological characters. The former synonymization of the genus Abromeitiella into Deuterocohnia (Spencer and Smith 1992) is re-evalutated in the present study. Morphological as well as molecular investigations revealed Deuterocohnia incl. Abromeitiella as being monophyletic, with some indications that a monophyletic Abromeitiella lineage arose from within Deuterocohnia. Thus the union of both genera is confirmed. The second part of the present thesis describes and discusses the molecular phylogenies and networks. Molecular analyses of three chloroplast intergenic spacers (rpl32-trnL, rps16-trnK, trnS-ycf3) were conducted with a sample set of 119 taxa. This set included 103 Deuterocohnia accessions from all 17 described species of the genus and 16 outgroup taxa from the remainder of Pitcairnioideae s.str. (Dyckia (8 sp.), Encholirium (2 sp.), Fosterella (4 sp.) and Pitcairnia (2 sp.)). With its high sampling density, the present investigation by far represents the most comprehensive molecular study of Deuterocohnia up till now. All data sets were analyzed separately as well as in combination, and various optimality criteria for phylogenetic tree construction were applied (Maximum Parsimony, Maximum Likelihood, Bayesian inferences and the distance method Neighbour Joining). Congruent topologies were generally obtained with different algorithms and optimality criteria, but individual clades received different degrees of statistical support in some analyses. The rps16-trnK locus was the most informative among the three spacer regions examined. The results of the chloroplast DNA analyses revealed a highly supported paraphyly of Deuterocohnia. Thus, the cpDNA trees divide the genus into two subclades (A and B), of which Deuterocohnia subclade B is sister to the included Dyckia and Encholirium accessions, and both together are sister to Deuterocohnia subclade A. To further examine the relationship between Deuterocohnia and Dyckia/Encholirium at the generic level, two nuclear low copy markers (PRK exon2-5 and PHYC exon1) were analysed with a reduced taxon set. This set included 22 Deuterocohnia accessions (including members of both cpDNA subclades), 2 Dyckia, 2 Encholirium and 2 Fosterella species. Phylogenetic trees were constructed as described above, and for comparison the same reduced taxon set was also analysed at the three cpDNA data loci. In contrast to the cpDNA results, the nuclear DNA data strongly supported the monophyly of Deuterocohnia, which takes a sister position to a clade of Dyckia and Encholirium samples. As morphology as well as nuclear DNA data generated in the present study and in a former AFLP analysis (Horres 2003) all corroborate the monophyly of Deuterocohnia, the apparent paraphyly displayed in cpDNA analyses is interpreted to be the consequence of a chloroplast capture event. This involves the introgression of the chloroplast genome from the common ancestor of the Dyckia/ Encholirium lineage into the ancestor of Deuterocohnia subclade B species. The chloroplast haplotypes are not species-specific in Deuterocohnia. Thus, one haplotype was sometimes shared by several species, where the same species may harbour different haplotypes. The arrangement of haplotypes followed geographical patterns rather than taxonomic boundaries, which may indicate some residual gene flow among populations from different Deuteroccohnia species. Phenotypic species coherence on the background of ongoing gene flow may then be maintained by sets of co-adapted alleles, as was suggested by the porous genome concept (Wu 2001, Palma-Silva et al. 2011). The results of the present study suggest the following scenario for the evolution of Deuterocohnia and its species. Deuterocohnia longipetala may be envisaged as a representative of the ancestral state within the genus. This is supported by (1) the wide distribution of this species; (2) the overlap in distribution area with species of Dyckia; (3) the laxly flowered inflorescences, which are also typical for Dyckia; (4) the yellow petals with a greenish tip, present in most other Deuterocohnia species. The following six extant lineages within Deuterocohnia might have independently been derived from this ancestral state with a few changes each: (I) D. meziana, D. brevispicata and D. seramisiana (Bolivia, lowland to montane areas, mostly reddish-greenish coloured, very laxly to very densely flowered); (II) D. strobilifera (Bolivia, high Andean mountains, yellow flowers, densely flowered); (III) D. glandulosa (Bolivia, montane areas, yellow-greenish flowers, densely flowered); (IV) D. haumanii, D. schreiteri, D. digitata, and D. chrysantha (Argentina, Chile, E Andean mountains and Atacama desert, yellow-greenish flowers, densely flowered); (V) D. recurvipetala (Argentina, foothills of the Andes, recurved yellow flowers, laxly flowered); (VI) D. gableana, D. scapigera, D. sanctae-crucis, D. abstrusa, D. brevifolia, D. lotteae (former Abromeitiella species, Bolivia, Argentina, higher Andean mountains, greenish-yellow flowers, inflorescence usually simple). Originating from the lower montane Andean regions, at least four lineages of the genus (I, II, IV, VI) adapted in part to higher altitudes by developing densely flowered partial inflorescences, shorter flowers and – in at least three lineages (II, IV, VI) – smaller rosettes, whereas species spreading into the lowlands (I, V) developed larger plants, laxly flowered, amply branched inflorescences and in part larger flowers (I).

Optimization of Processing Technology for Commercial Drying of Bananas (Matooke)

Summary - Cooking banana is one of the most important crops in Uganda; it is a staple food and source of household income in rural areas. The most common cooking banana is locally called matooke, a Musa sp triploid acuminate genome group (AAA-EAHB). It is perishable and traded in fresh form leading to very high postharvest losses (22-45%). This is attributed to: non-uniform level of harvest maturity, poor handling, bulk transportation and lack of value addition/processing technologies, which are currently the main challenges for trade and export, and diversified utilization of matooke. Drying is one of the oldest technologies employed in processing of agricultural produce. A lot of research has been carried out on drying of fruits and vegetables, but little information is available on matooke. Drying of matooke and milling it to flour extends its shelf-life is an important means to overcome the above challenges. Raw matooke flour is a generic flour developed to improve shelf stability of the fruit and to find alternative uses. It is rich in starch (80 - 85%db) and subsequently has a high potential as a calorie resource base. It possesses good properties for both food and non-food industrial use. Some effort has been done to commercialize the processing of matooke but there is still limited information on its processing into flour. It was imperative to carry out an in-depth study to bridge the following gaps: lack of accurate information on the maturity window within which matooke for processing into flour can be harvested leading to non-uniform quality of matooke flour; there is no information on moisture sorption isotherm for matooke from which the minimum equilibrium moisture content in relation to temperature and relative humidity is obtainable, below which the dry matooke would be microbiologically shelf-stable; and lack of information on drying behavior of matooke and standardized processing parameters for matooke in relation to physicochemical properties of the flour. The main objective of the study was to establish the optimum harvest maturity window and optimize the processing parameters for obtaining standardized microbiologically shelf-stable matooke flour with good starch quality attributes. This research was designed to: i) establish the optimum maturity harvest window within which matooke can be harvested to produce a consistent quality of matooke flour, ii) establish the sorption isotherms for matooke, iii) establish the effect of process parameters on drying characteristics of matooke, iv) optimize the drying process parameters for matooke, v) validate the models of maturity and optimum process parameters and vi) standardize process parameters for commercial processing of matooke. Samples were obtained from a banana plantation at Presidential Initiative on Banana Industrial Development (PIBID), Technology Business Incubation Center (TBI) at Nyaruzunga – Bushenyi in Western Uganda. A completely randomized design (CRD) was employed in selecting the banana stools from which samples for the experiments were picked. The cultivar Mbwazirume which is soft cooking and commonly grown in Bushenyi was selected for the study. The static gravitation method recommended by COST 90 Project (Wolf et al., 1985), was used for determination of moisture sorption isotherms. A research dryer developed for this research. All experiments were carried out in laboratories at TBI. The physiological maturity of matooke cv. mbwazirume at Bushenyi is 21 weeks. The optimum harvest maturity window for commercial processing of matooke flour (Raw Tooke Flour - RTF) at Bushenyi is between 15-21 weeks. The finger weight model is recommended for farmers to estimate harvest maturity for matooke and the combined model of finger weight and pulp peel ratio is recommended for commercial processors. Matooke isotherms exhibited type II curve behavior which is characteristic of foodstuffs. The GAB model best described all the adsorption and desorption moisture isotherms. For commercial processing of matooke, in order to obtain a microbiologically shelf-stable dry product. It is recommended to dry it to moisture content below or equal to 10% (wb). The hysteresis phenomenon was exhibited by the moisture sorption isotherms for matooke. The isoteric heat of sorption for both adsorptions and desorption isotherms increased with decreased moisture content. The total isosteric heat of sorption for matooke: adsorption isotherm ranged from 4,586 – 2,386 kJ/kg and desorption isotherm from 18,194– 2,391 kJ/kg for equilibrium moisture content from 0.3 – 0.01 (db) respectively. The minimum energy required for drying matooke from 80 – 10% (wb) is 8,124 kJ/kg of water removed. Implying that the minimum energy required for drying of 1 kg of fresh matooke from 80 - 10% (wb) is 5,793 kJ. The drying of matooke takes place in three steps: the warm-up and the two falling rate periods. The drying rate constant for all processing parameters ranged from 5,793 kJ and effective diffusivity ranged from 1.5E-10 - 8.27E-10 m2/s. The activation energy (Ea) for matooke was 16.3kJ/mol (1,605 kJ/kg). Comparing the activation energy (Ea) with the net isosteric heat of sorption for desorption isotherm (qst) (1,297.62) at 0.1 (kg water/kg dry matter), indicated that Ea was higher than qst suggesting that moisture molecules travel in liquid form in matooke slices. The total color difference (ΔE*) between the fresh and dry samples, was lowest for effect of thickness of 7 mm, followed by air velocity of 6 m/s, and then drying air temperature at 70˚C. The drying system controlled by set surface product temperature, reduced the drying time by 50% compared to that of a drying system controlled by set air drying temperature. The processing parameters did not have a significant effect on physicochemical and quality attributes, suggesting that any drying air temperature can be used in the initial stages of drying as long as the product temperature does not exceed gelatinization temperature of matooke (72˚C). The optimum processing parameters for single-layer drying of matooke are: thickness = 3 mm, air temperatures 70˚C, dew point temperature 18˚C and air velocity 6 m/s overflow mode. From practical point of view it is recommended that for commercial processing of matooke, to employ multi-layer drying of loading capacity equal or less than 7 kg/m², thickness 3 mm, air temperatures 70˚C, dew point temperature 18˚C and air velocity 6 m/s overflow mode.

Enlarging a training set for genomic selction by imputation of un-genotyped animals in populations of varying genetic architecture

Background: The most common application of imputation is to infer genotypes of a high-density panel of markers on animals that are genotyped for a low-density panel. However, the increase in accuracy of genomic predictions resulting from an increase in the number of markers tends to reach a plateau beyond a certain density. Another application of imputation is to increase the size of the training set with un-genotyped animals. This strategy can be particularly successful when a set of closely related individuals are genotyped. ----- Methods: Imputation on completely un-genotyped dams was performed using known genotypes from the sire of each dam, one offspring and the offspring’s sire. Two methods were applied based on either allele or haplotype frequencies to infer genotypes at ambiguous loci. Results of these methods and of two available software packages were compared. Quality of imputation under different population structures was assessed. The impact of using imputed dams to enlarge training sets on the accuracy of genomic predictions was evaluated for different populations, heritabilities and sizes of training sets. ----- Results: Imputation accuracy ranged from 0.52 to 0.93 depending on the population structure and the method used. The method that used allele frequencies performed better than the method based on haplotype frequencies. Accuracy of imputation was higher for populations with higher levels of linkage disequilibrium and with larger proportions of markers with more extreme allele frequencies. Inclusion of imputed dams in the training set increased the accuracy of genomic predictions. Gains in accuracy ranged from close to zero to 37.14%, depending on the simulated scenario. Generally, the larger the accuracy already obtained with the genotyped training set, the lower the increase in accuracy achieved by adding imputed dams. ----- Conclusions: Whenever a reference population resembling the family configuration considered here is available, imputation can be used to achieve an extra increase in accuracy of genomic predictions by enlarging the training set with completely un-genotyped dams. This strategy was shown to be particularly useful for populations with lower levels of linkage disequilibrium, for genomic selection on traits with low heritability, and for species or breeds for which the size of the reference population is limited.

Task-Level Robot Learning

We are investigating how to program robots so that they learn from experience. Our goal is to develop principled methods of learning that can improve a robot's performance of a wide range of dynamic tasks. We have developed task-level learning that successfully improves a robot's performance of two complex tasks, ball-throwing and juggling. With task- level learning, a robot practices a task, monitors its own performance, and uses that experience to adjust its task-level commands. This learning method serves to complement other approaches, such as model calibration, for improving robot performance.