The Relative Efficiency of Automatic and Discretionary Industrial Aid

For the last two decades, the primary instruments for UK regional policy have been discretionary subsidies. Such aid is targeted at “additional” projects - projects that would not have been implemented without the subsidy - and the subsidy should be the minimum necessary for the project to proceed. Discretionary subsidies are thought to be more efficient than automatic subsidies, where many of the aided projects are non-additional and all projects receive the same subsidy rate. The present paper builds on Swales (1995) and Wren (2007a) to compare three subsidy schemes: an automatic scheme and two types of discretionary scheme, one with accurate appraisal and the other with appraisal error. These schemes are assessed on their expected welfare impacts. The particular focus is the reduction in welfare gain imposed by the interaction of appraisal error and the requirements for accountability. This is substantial and difficult to detect with conventional evaluation techniques.

Analog Modelling of N-S anticlines of the External Sierras (Jaca basin, Southern Pyrenees)

Report for the scientific sojourn carried out at the Uppsala Universitet, Sweden, from April to July the 2007. Two series of analogue models are used to explore ductile-frictional contrasts of the basal décollement in the development of oblique and transverse structures simultaneously to thin-skinned shortening. These models simulate the evolution of the Central External Sierras (Southern Pyrenees, Spain), which constitute the frontal emerging part of the southernmost Pyrenean thrust sheet. They are characterized by the presence of transverse N-S to NW-SE anticlines, which are perpendicular to the Pyrenean structural trend and developed in the hangingwall of the Santo Domingo thrust system, detaching on an unevenly distributed Triassic materials (evaporitic-dolomitic interfingerings). Model setup performs a décollement made by three patches of silicone neighbouring pure brittle sand. Model series A test the thickness ratio between overburden and décollement. Model series B test the width of frictional detachment areas. Model results show how deformation reaches further in areas detached on ductile layer whereas frictional décollement areas assimilate the strain by means of an additional uplift. This replicates the structural style of Central External Sierras: higher structural relief of N-S anticlines with regard to orogen-parallel structures, absence of a representative ductile décollement in the core, tilting towards the orogen and foreland-side closure not thrusted by the frontal emerging South-Pyrenean thrust.

Spatial modelling of biodiversity at the community level

1. Statistical modelling is often used to relate sparse biological survey data to remotely derived environmental predictors, thereby providing a basis for predictively mapping biodiversity across an entire region of interest. The most popular strategy for such modelling has been to model distributions of individual species one at a time. Spatial modelling of biodiversity at the community level may, however, confer significant benefits for applications involving very large numbers of species, particularly if many of these species are recorded infrequently. 2. Community-level modelling combines data from multiple species and produces information on spatial pattern in the distribution of biodiversity at a collective community level instead of, or in addition to, the level of individual species. Spatial outputs from community-level modelling include predictive mapping of community types (groups of locations with similar species composition), species groups (groups of species with similar distributions), axes or gradients of compositional variation, levels of compositional dissimilarity between pairs of locations, and various macro-ecological properties (e.g. species richness). 3. Three broad modelling strategies can be used to generate these outputs: (i) 'assemble first, predict later', in which biological survey data are first classified, ordinated or aggregated to produce community-level entities or attributes that are then modelled in relation to environmental predictors; (ii) 'predict first, assemble later', in which individual species are modelled one at a time as a function of environmental variables, to produce a stack of species distribution maps that is then subjected to classification, ordination or aggregation; and (iii) 'assemble and predict together', in which all species are modelled simultaneously, within a single integrated modelling process. These strategies each have particular strengths and weaknesses, depending on the intended purpose of modelling and the type, quality and quantity of data involved. 4. Synthesis and applications. The potential benefits of modelling large multispecies data sets using community-level, as opposed to species-level, approaches include faster processing, increased power to detect shared patterns of environmental response across rarely recorded species, and enhanced capacity to synthesize complex data into a form more readily interpretable by scientists and decision-makers. Community-level modelling therefore deserves to be considered more often, and more widely, as a potential alternative or supplement to modelling individual species.

Industrial Structure, Trade and Regional Economics : Market Segmentation

We consider a general equilibrium model a la Bhaskar (Review of Economic Studies 2002): there are complementarities across sectors, each of which comprise (many) heterogenous monopolistically competitive firms. Bhaskar's model is extended in two directions: production requires capital, and labour markets are segmented. Labour market segmentation models the difficulties of labour migrating across international barriers (in a trade context) or from a poor region to a richer one (in a regional context), whilst the assumption of a single capital market means that capital flows freely between countries or regions. The model is solved analytically and a closed form solution is provided. Adding labour market segmentation to Bhaskar's two-tier industrial structure allows us to study, inter alia, the impact of competition regulations on wages and - financial flows both in the regional and international context, and the output, welfare and financial implications of relaxing immigration laws. The analytical approach adopted allows us, not only to sign the effect of policies, but also to quantify their effects. Introducing capital as a factor of production improves the realism of the model and refi nes its empirically testable implications.

Financial liberalisation and industrial development in Malawi

It has been suggested that financial liberalisation may be a key policy to promote industrialisation as it removes the credit access constraint on firms, especially small and medium ones. We investigate the effect of credit expansion in the wake of liberalisation on the structure of the industrial sectors in Malawi and find that, in contrast to the hypothesis above, it resulted in an increase in industrial concentration and a decrease in net firm entry, especially in sectors that are more finance dependent. The case of Malawi is interesting because financial liberalisation has been justified precisely as a means for industrial development and because the implementation of the policy has been regarded as relatively successful.

Infrastructure Finance and Industrial Takeoff in England

That financial matters did not constrain industrial takeoff in the UK is generally accepted in the historical literature; in contrast, contemporary empirical analyses have found evidence that financial development can be a causal determinant of economic growth. We look to reconcile these findings by concentrating on a particular aspect of industrialising UK where inefficiencies in finance could have had bite: The finance of physical infrastructures. We document the historical record and develop the importance of spatial disaggregation and spillovers in both technological and financial development. We develop a simple model that captures the nature of infrastructure finance within a theory of endogenous growth where financial costs are endogenous. We argue that the conception of the finance-growth nexus as a largely static, aggregative phenomenon misses out a good deal of complexity and we relate that complexity to a number of implications for regulation of both financial systems and the emergence of infrastructures

The Significance of Identifying Industrial clusters The Case of Scotland

Industrial clustering policy is now an integral part of economic development planning in most advanced economies. However, there have been concerns in some quarters over the ability of an industrial cluster-based development strategy to deliver its promised economic benefits and this has been increasingly been blamed on the failure by governments to identify industrial clusters. In a study published in 2001, the DTI identified clusters across the UK based on the comparative scale and significance of industrial sectors. The study identified thirteen industrial clusters in Scotland. However the clusters identified are not a homogeneous set and they seem to vary in terms of their geographic concentration within Scotland. This paper examines the spatial distribution of industries within Scotland, thereby identifying more localised clusters. The study follows as closely as possible the DTI methodology which was used to identify such concentrations of economic activity with particular attention directed towards the thirteen clusters identified by the DTI. The paper concludes with some remarks of the general problem of identifying the existence of industrial clusters.

Evaluating sampling strategies and logistic regression methods for modelling complex land cover changes

The role of land cover change as a significant component of global change has become increasingly recognized in recent decades. Large databases measuring land cover change, and the data which can potentially be used to explain the observed changes, are also becoming more commonly available. When developing statistical models to investigate observed changes, it is important to be aware that the chosen sampling strategy and modelling techniques can influence results. We present a comparison of three sampling strategies and two forms of grouped logistic regression models (multinomial and ordinal) in the investigation of patterns of successional change after agricultural land abandonment in Switzerland. Results indicated that both ordinal and nominal transitional change occurs in the landscape and that the use of different sampling regimes and modelling techniques as investigative tools yield different results. Synthesis and applications. Our multimodel inference identified successfully a set of consistently selected indicators of land cover change, which can be used to predict further change, including annual average temperature, the number of already overgrown neighbouring areas of land and distance to historically destructive avalanche sites. This allows for more reliable decision making and planning with respect to landscape management. Although both model approaches gave similar results, ordinal regression yielded more parsimonious models that identified the important predictors of land cover change more efficiently. Thus, this approach is favourable where land cover change pattern can be interpreted as an ordinal process. Otherwise, multinomial logistic regression is a viable alternative.

Multilevel Modelling with Spatial Effects

In multilevel modelling, interest in modeling the nested structure of hierarchical data has been accompanied by increasing attention to different forms of spatial interactions across different levels of the hierarchy. Neglecting such interactions is likely to create problems of inference, which typically assumes independence. In this paper we review approaches to multilevel modelling with spatial effects, and attempt to connect the two literatures, discussing the advantages and limitations of various approaches.

Modelling Breaks and Clusters in the Steady States of Macroeconomic Variables

Macroeconomists working with multivariate models typically face uncertainty over which (if any) of their variables have long run steady states which are subject to breaks. Furthermore, the nature of the break process is often unknown. In this paper, we draw on methods from the Bayesian clustering literature to develop an econometric methodology which: i) finds groups of variables which have the same number of breaks; and ii) determines the nature of the break process within each group. We present an application involving a five-variate steady-state VAR.

The Signalling Channel of Central Bank Interventions: Modelling the Yen/US Dollar Exchange Rate

This paper presents a theoretical framework analysing the signalling channel of exchange rate interventions as an informational trigger. We develop an implicit target zone framework with learning in order to model the signalling channel. The theoretical premise of the model is that interventions convey signals that communicate information about the exchange rate objectives of central bank. The model is used to analyse the impact of Japanese FX interventions during the period 1999 -2011 on the yen/US dollar dynamics.

The regional employment impacts of renewable energy expenditures: The case for modelling

One aspect of the case for policy support for renewable energy developments is the wider economic benefits that are expected to be generated. Within Scotland, as with other regions of the UK, there is a focus on encouraging domestically‐based renewable technologies. In this paper, we use a regional computable general equilibrium framework to model the impact on the Scottish economy of expenditures relating to marine energy installations. The results illustrate the potential for (considerable) ‘legacy’ effects after expenditures cease. In identifying the specific sectoral expenditures with the largest impact on (lifetime) regional employment, this approach offers important policy guidance.

The regional employment impacts of renewable energy expenditures: The case for modelling

One aspect of the case for policy support for renewable energy developments is the wider economic benefits that are expected to be generated. Within Scotland, as with other regions of the UK, there is a focus on encouraging domestically‐based renewable technologies. In this paper, we use a regional computable general equilibrium framework to model the impact on the Scottish economy of expenditures relating to marine energy installations. The results illustrate the potential for (considerable) ‘legacy’ effects after expenditures cease. In identifying the specific sectoral expenditures with the largest impact on (lifetime) regional employment, this approach offers important policy guidance.

The regional economic impacts of biofuels: A review of multisectoral modelling techniques and evaluation of applications

The regional economic impact of biofuel production depends upon a number of interrelated factors: the specific biofuels feedstock and production technology employed; the sector’s embeddedness to the rest of the economy, through its demand for local resources; the extent to which new activity is created. These issues can be analysed using multisectoral economic models. Some studies have used (fixed price) Input-Output (IO) and Social Accounting Matrix (SAM) modelling frameworks, whilst a nascent Computable General Equilibrium (CGE) literature has also begun to examine the regional (and national) impact of biofuel development. This paper reviews, compares and evaluates these approaches for modelling the regional economic impacts of biofuels.