999 resultados para industrial area
Resumo:
Estuaries are perhaps the most threatened environments in the coastal fringe; the coincidence of high natural value and attractiveness for human use has led to conflicts between conservation and development. These conflicts occur in the Sado Estuary since its location is near the industrialised zone of Peninsula of Setúbal and at the same time, a great part of the Estuary is classified as a Natural Reserve due to its high biodiversity. These facts led us to the need of implementing a model of environmental management and quality assessment, based on methodologies that enable the assessment of the Sado Estuary quality and evaluation of the human pressures in the estuary. These methodologies are based on indicators that can better depict the state of the environment and not necessarily all that could be measured or analysed. Sediments have always been considered as an important temporary source of some compounds or a sink for other type of materials or an interface where a great diversity of biogeochemical transformations occur. For all this they are of great importance in the formulation of coastal management system. Many authors have been using sediments to monitor aquatic contamination, showing great advantages when compared to the sampling of the traditional water column. The main objective of this thesis was to develop an estuary environmental management framework applied to Sado Estuary using the DPSIR Model (EMMSado), including data collection, data processing and data analysis. The support infrastructure of EMMSado were a set of spatially contiguous and homogeneous regions of sediment structure (management units). The environmental quality of the estuary was assessed through the sediment quality assessment and integrated in a preliminary stage with the human pressure for development. Besides the earlier explained advantages, studying the quality of the estuary mainly based on the indicators and indexes of the sediment compartment also turns this methodology easier, faster and human and financial resource saving. These are essential factors to an efficient environmental management of coastal areas. Data management, visualization, processing and analysis was obtained through the combined use of indicators and indices, sampling optimization techniques, Geographical Information Systems, remote sensing, statistics for spatial data, Global Positioning Systems and best expert judgments. As a global conclusion, from the nineteen management units delineated and analyzed three showed no ecological risk (18.5 % of the study area). The areas of more concern (5.6 % of the study area) are located in the North Channel and are under strong human pressure mainly due to industrial activities. These areas have also low hydrodynamics and are, thus associated with high levels of deposition. In particular the areas near Lisnave and Eurominas industries can also accumulate the contamination coming from Águas de Moura Channel, since particles coming from that channel can settle down in that area due to residual flow. In these areas the contaminants of concern, from those analyzed, are the heavy metals and metalloids (Cd, Cu, Zn and As exceeded the PEL guidelines) and the pesticides BHC isomers, heptachlor, isodrin, DDT and metabolits, endosulfan and endrin. In the remain management units (76 % of the study area) there is a moderate impact potential of occurrence of adverse ecological effects and in some of these areas no stress agents could be identified. This emphasizes the need for further research, since unmeasured chemicals may be causing or contributing to these adverse effects. Special attention must be taken to the units with moderate impact potential of occurrence of adverse ecological effects, located inside the natural reserve. Non-point source pollution coming from agriculture and aquaculture activities also seem to contribute with important pollution load into the estuary entering from Águas de Moura Channel. This pressure is expressed in a moderate impact potential for ecological risk existent in the areas near the entrance of this Channel. Pressures may also came from Alcácer Channel although they were not quantified in this study. The management framework presented here, including all the methodological tools may be applied and tested in other estuarine ecosystems, which will also allow a comparison between estuarine ecosystems in other parts of the globe.
Resumo:
OBJECTIVE: To evaluate the most productive types of properties and containers for Aedes aegypti and the spatial distribution of entomological indices.METHODS: Between December 2006 and February 2007, the vector's immature forms were collected to obtain entomological indices in 9,875 properties in the Jaguare neighborhood of Sao Jose do Rio Preto, SP, Southeastern Brazil. In March and April 2007, a questionnaire about the conditions and characteristics of properties was administered. Logistic regression was used to identify variables associated with the presence of pupae at the properties. Indices calculated per block were combined with a geo-referenced map, and thematic maps of these indices were obtained using statistical interpolation.RESULTS: The properties inspected had the following Ae. aegypti indices: Breteau Index = 18.9, 3.7 larvae and 0.42 pupae per property, 5.2 containers harboring Ae. aegypti per hectare, 100.0 larvae and 11.6 pupae per hectare, and 1.3 larvae and 0.15 pupae per inhabitant. The presence of yards, gardens and animals was associated with the presence of pupae.CONCLUSIONS: Specific types of properties and containers that simultaneously had low frequencies among those positive for the vector and high participation in the productivity of larvae and pupae were not identified. The use of indices including larval and pupal counts does not provide further information beyond that obtained from the traditional Stegomyia indices in locations with characteristics similar to those of São José do Rio Preto. The indices calculated per area were found to be more accurate for the spatial assessment of infestation. The Ae. aegypti infestation levels exhibited extensive spatial variation, indicating that the assessment of infestation in micro areas is needed.
Resumo:
We consider reliable communications in Body Area Networks (BAN), where a set of nodes placed on human body are connected using wireless links. In order to keep the Specific Absorption Rate (SAR) as low as possible for health safety reasons, these networks operate in low transmit power regime, which however, is known to be error prone. It has been observed that the fluctuations of the Received Signal Strength (RSS) at the nodes of a BAN on a moving person show certain regularities and that the magnitude of these fluctuations are significant (5 - 20 dB). In this paper, we present BANMAC, a MAC protocol that monitors and predicts the channel fluctuations and schedules transmissions opportunistically when the RSS is likely to be higher. The MAC protocol is capable of providing differentiated service and resolves co-channel interference in the event of multiple co-located BANs in a vicinity. We report the design and implementation details of BANMAC integrated with the IEEE 802.15.4 protocol stack. We present experimental data which show that the packet loss rate (PLR) of BANMAC is significantly lower as compared to that of the IEEE 802.15.4 MAC. For comparable PLR, the power consumption of BANMAC is also significantly lower than that of the IEEE 802.15.4. For co-located networks, the convergence time to find a conflict-free channel allocation was approximately 1 s for the centralized coordination mechanism and was approximately 4 s for the distributed coordination mechanism.
Resumo:
Significant research efforts are being devoted to Body Area Networks (BAN) due to their potential for revolutionizing healthcare practices. Energy-efficiency and communication reliability are critically important for these networks. In an experimental study with three different mote platforms, we show that changes in human body shadowing as well as those in the relative distance and orientation of nodes caused by the common human body movements can result in significant fluctuations in the received signal strength within a BAN. Furthermore, regular movements, such as walking, typically manifest in approximately periodic variations in signal strength. We present an algorithm that predicts the signal strength peaks and evaluate it on real-world data. We present the design of an opportunistic MAC protocol, named BANMAC, that takes advantage of the periodic fluctuations of the signal strength to achieve high reliability even with low transmission power.
Resumo:
OBJETIVO Analisar o uso de medicamentos entre idosos e os fatores associados. MÉTODOS Estudo transversal com 400 indivíduos maiores de 60 anos residentes na área de abrangência da Estratégia Saúde da Família, em Recife, PE, em 2009. Os indivíduos foram selecionados por amostra probabilística sistemática, com coleta de dados de base domiciliar. Foram avaliadas variáveis socioeconômicas e demográficas, estilo de vida, condições de saúde e nutricionais. A variável independente foi uso de medicamentos. O diagrama analítico envolveu análises estatísticas uni e multivariadas. RESULTADOS A prevalência de uso de medicamentos foi de 85,5%. A polifarmácia (> 5 medicamentos) ocorreu em 11% dos casos. Dos 951 medicamentos relatados, 98,2% foram por prescrição médica e 21,6% foram considerados inseguros para idosos. Os medicamentos de uso nos sistemas cardiovascular (42,9%), nervoso central (20,2%), digestório e no metabolismo orgânico (17,3%) foram os mais utilizados. O uso de polifarmácia associou-se à escolaridade (p = 0,008), à saúde autorreferida (p = 0,012), à doença crônica autorreferida (p = 0,000) e ao número de consultas médicas ao ano (0,000). CONCLUSÕES A proporção de uso de medicamentos é elevada entre idosos, inclusive daqueles considerados inadequados, e há desigualdades entre grupos de idosos quando se considera escolaridade, quantidade de consultas médicas e saúde autorreferida.
Resumo:
Trabalho de Projeto para obtenção do grau de Mestre em Engenharia Civil
Resumo:
No tratamento de águas residuais por lamas activadas, existem diferentes populações de protozoários e metazoários que se podem desenvolver durante o processo. A sua presença é fundamental para o bom desempenho da ETAR. Além de reduzirem a turvação do efluente final, estimulam o crescimento bacteriano, promovem a floculação e algumas espécies reduzem a poluição. É possível estabelecer uma estreita relação entre a predominância de determinadas espécies ou grupos de espécies, com parâmetros operacionais da ETAR, tais como os índices bióticos. Este procedimento requer a identificação e enumeração das diferentes espécies. No entanto, existem outros métodos, que apresentam relações entre a abundância de uma dada espécie ou grupo e os parâmetros da estação. O presente trabalho tem como objectivos: avaliar o funcionamento do sistema de tratamento de lamas activadas através da observação microscópica de protozoários e metazoários, identificação e contagem das espécies relevantes; estabelecer relações entre os organismos que contribuem para o processo de depuração de águas residuais e as condições de operação, como parâmetros físicoquímicos ou o desempenho da ETAR; e produzir uma ferramenta de apoio à gestão da ETAR, baseada em princípios biológicos. Pretende-se, ainda, contribuir e incentivar para a adopção de metodologias semelhantes em outros sistemas de lamas activadas em funcionamento no nosso País. Em termos metodológicos, a colheita de amostras foi realizada semanalmente na ETAR da ZIA durante dois meses e meio. Os parâmetros operacionais e físico-químicos foram obtidos junto da ETAR. A análise biológica foi efectuada por microscopia óptica. Avaliou-se qualitativa e quantitativamente a microfauna presente no tanque de arejamento, no poço de mistura de lamas e no clarificado de ambos os decantadores, a fim de se verificar as possíveis correlações desses parâmetros com a eficiência do sistema. Aplicou-se os resultados biológicos obtidos, em quatro modelos propostos para a avaliação do processo de tratamento, baseada em análises biológicas. Em termos qualitativos e na maior parte das observações, a lama apresentou boa qualidade. A ETAR da ZIA foi colonizada por tecamebas, principalmente Arcella sp. e Euglypha alveolata, em todo, o estudo e em todos os pontos analisados. No tanque de arejamento foram sempre observados ciliados nadadores livres. A densidade total de organismos no tanque de arejamento variou de 2982 e 7330 organismos/mL, com valor médio de 5995 organismos/mL. Relativamente, aos parâmetros estudados, os objectivos de remoção para o CBO5, CQO, SST e SSV foram alcançados.
Resumo:
The availability of small inexpensive sensor elements enables the employment of large wired or wireless sensor networks for feeding control systems. Unfortunately, the need to transmit a large number of sensor measurements over a network negatively affects the timing parameters of the control loop. This paper presents a solution to this problem by representing sensor measurements with an approximate representation-an interpolation of sensor measurements as a function of space coordinates. A priority-based medium access control (MAC) protocol is used to select the sensor messages with high information content. Thus, the information from a large number of sensor measurements is conveyed within a few messages. This approach greatly reduces the time for obtaining a snapshot of the environment state and therefore supports the real-time requirements of feedback control loops.
Resumo:
Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica
Resumo:
OBJECTIVE This study investigated the serological status of dogs living in a visceral leishmaniasis-endemic area and its correlation with the parasitological condition of the animals.METHODS Canine humoral response was evaluated using the sera of 134 dogs by enzyme-linked immunosorbent assay and immunohistochemistry to detect parasites in the skin, lymph node, and spleen of the animals. The specific antibodies investigated were IgG, IgG1, IgG2, and IgE.RESULTS According to the parasitological, laboratory, and clinical findings, the dogs were placed into one of four groups: asymptomatic with (AP+, n = 21) or without (AP-, n = 36) Leishmania tissue parasitism and symptomatic with (SP+, n = 52) or without (SP-, n = 25) parasitism. Higher IgG and IgE levels were positively correlated with the infection condition and parasite load, but not with the clinical status. In all groups, total IgG was the predominant antibody, which occurred at the expense of IgG2 instead of IgG1. Most of the infected dogs tested positive for IgG (SP+, 98.1%; AP+, 95.2%), whereas this was not observed with IgE (SP+, 80.8%; AP+, 71.2%). The most relevant finding was the high positivity of the uninfected dogs for Leishmania-specific IgG (SP-, 60.0%; AP-, 44.4%), IgE (SP-, 44.0%; AP-, 27.8%), IgG1 (SP-, 28.0%; AP-, 22.2%), and IgG2 antibodies (SP-, 56.0%; AP-, 41.7%).CONCLUSIONS The serological status of dogs, as determined by any class or subclass of antibodies, did not accurately distinguish dogs infected with L. (L.) infantum chagasifrom uninfected animals. The inaccuracy of the serological result may impair not only the diagnosis, but also epidemiological investigations and strategies for visceral leishmaniasis control. This complex serological scenario occurring in a visceral leishmaniasis-endemic area highlights the challenges associated with canine diagnosis and points out the difficulties experienced by veterinary clinicians and coordinators of control programs.
Resumo:
The characteristics of carbon fibre reinforced laminates had widened their use, from aerospace to domestic appliances. A common characteristic is the need of drilling for assembly purposes. It is known that a drilling process that reduces the drill thrust force can decrease the risk of delamination. In this work, delamination assessment methods based on radiographic data are compared and correlated with mechanical test results (bearing test).
Resumo:
The performance of the Weather Research and Forecast (WRF) model in wind simulation was evaluated under different numerical and physical options for an area of Portugal, located in complex terrain and characterized by its significant wind energy resource. The grid nudging and integration time of the simulations were the tested numerical options. Since the goal is to simulate the near-surface wind, the physical parameterization schemes regarding the boundary layer were the ones under evaluation. Also, the influences of the local terrain complexity and simulation domain resolution on the model results were also studied. Data from three wind measuring stations located within the chosen area were compared with the model results, in terms of Root Mean Square Error, Standard Deviation Error and Bias. Wind speed histograms, occurrences and energy wind roses were also used for model evaluation. Globally, the model accurately reproduced the local wind regime, despite a significant underestimation of the wind speed. The wind direction is reasonably simulated by the model especially in wind regimes where there is a clear dominant sector, but in the presence of low wind speeds the characterization of the wind direction (observed and simulated) is very subjective and led to higher deviations between simulations and observations. Within the tested options, results show that the use of grid nudging in simulations that should not exceed an integration time of 2 days is the best numerical configuration, and the parameterization set composed by the physical schemes MM5–Yonsei University–Noah are the most suitable for this site. Results were poorer in sites with higher terrain complexity, mainly due to limitations of the terrain data supplied to the model. The increase of the simulation domain resolution alone is not enough to significantly improve the model performance. Results suggest that error minimization in the wind simulation can be achieved by testing and choosing a suitable numerical and physical configuration for the region of interest together with the use of high resolution terrain data, if available.
Resumo:
Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em: Instrumentação Manutenção Industrial e Qualidade
Resumo:
Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Conservação e Restauro. Área de especialização: pedra