Movement effects on the flow physics and nutrient delivery in engineered valvular tissues

Mechanical conditioning has been shown to promote tissue formation in a wide variety of tissue engineering efforts. However the underlying mechanisms by which external mechanical stimuli regulate cells and tissues are not known. This is particularly relevant in the area of heart valve tissue engineering (HVTE) owing to the intense hemodynamic environments that surround native valves. Some studies suggest that oscillatory shear stress (OSS) caused by steady flow and scaffold flexure play a critical role in engineered tissue formation derived from bone marrow derived stem cells (BMSCs). In addition, scaffold flexure may enhance nutrient (e.g. oxygen, glucose) transport. In this study, we computationally quantified the i) magnitude of fluid-induced shear stresses; ii) the extent of temporal fluid oscillations in the flow field using the oscillatory shear index (OSI) parameter, and iii) glucose and oxygen mass transport profiles. Noting that sample cyclic flexure induces a high degree of oscillatory shear stress (OSS), we incorporated moving boundary computational fluid dynamic simulations of samples housed within a bioreactor to consider the effects of: 1) no flow, no flexure (control group), 2) steady flow-alone, 3) cyclic flexure-alone and 4) combined steady flow and cyclic flexure environments. We also coupled a diffusion and convention mass transport equation to the simulated system. We found that the coexistence of both OSS and appreciable shear stress magnitudes, described by the newly introduced parameter OSI-:τ: explained the high levels of engineered collagen previously observed from combining cyclic flexure and steady flow states. On the other hand, each of these metrics on its own showed no association. This finding suggests that cyclic flexure and steady flow synergistically promote engineered heart valve tissue production via OSS, so long as the oscillations are accompanied by a critical magnitude of shear stress. In addition, our simulations showed that mass transport of glucose and oxygen is enhanced by sample movement at low sample porosities, but did not play a role in highly porous scaffolds. Preliminary in-house in vitro experiments showed that cell proliferation and phenotype is enhanced in OSI-:τ: environments.^

Operant and Respondent Procedures to Establish Social Stimuli as Reinforcers in Children with Autism

According to the DSM-IV- TR (American Psychiatric Association, 2000), one of the core deficits in autism is in the impairment of social interaction. Some have suggested that underlying these deficits is the reality that individuals with autism do not find social stimuli to be as reinforcing as other types of stimuli (Dawson, 2008). An interesting and growing body of literature supports the notion that symptoms in autism may be caused by a general reduction in social motivation (Chevallier et al., 2012). A review of the literature suggests that social orienting and social motivation are low in individuals with autism, and including social motivation as a target for therapeutic intervention should be pursued (Helt et al., 2008). Through our understanding of learning processes, researchers in behavior analysis and related fields have been able to use conditioning procedures to change the function of neutral or ineffective stimuli, including tokens (Ayllon & Azrin, 1968), facial expressions (Gewirtz & Pelaez-Nogueras, 1992) and praise (Dozier et al., 2012). The current study aimed to use operant and respondent procedures to condition social stimuli that were empirically shown to not be reinforcing prior to conditioning. Further, this study aimed to compare the two procedures in their effectiveness to condition social stimuli to function as reinforcers, and in their maintenance of effects over time. Using a multiple-baseline, multi-element design, one social stimulus was conditioned under each procedure to compare the different response rates following conditioning. Finally, the study sought to determine if conditioning social stimuli to function as reinforcers had any effect on the social functioning of young children with autism. Six children diagnosed with autism between the ages of 18 months and 3 years participated. Results show that the respondent procedure (pairing) resulted in more robust and enduring effects than the operant procedure (Sd procedure). Results of a social communication assessment (ESCS, Mundy et al., 2003) before and after conditioning demonstrate gains in all areas of social communication, particularly in the areas of initiating and responding to joint attention.

Management of industrialization projects

Short time-to-market is a key success factor in the todays’ dynamic business environment and many companies are trying to improve their product development processes. A challenge is to develop products according to the time plan and at the same time keeping the cost low and the quality high. This study focuses on the project management within the product development process in an automotive industry. The background of this study started as a request from the research and development department at the automotive company, which led to the following questions; 1) what are the most crucial factors for project success? 2) How can these factors contribute to a more successful outcome? 3) How can project management decrease product development lead time by sharing knowledge? The research approach is a case study and the data collection consist of interviews and questioners at two companies connected to project management in product development projects. Spider charts are created from the collected data containing eleven dimensions to show similarities and differences between the project managers working within the research and development department as well as between the two companies. The main conclusions are that there is a need to allow a certain level of flexibility when managing projects, in order to more easily handle late changes. Being involved in a project from the concept phase could facilitate the product development activities later on, due to a deeper understanding regarding previous decisions. Further, knowledge sharing methods, such as databases, has to be designed to be suitable for a specific organization and user friendly which enables the users to more easily search for specific types of knowledge. Lastly, a low level on the detailed focus is shown to be another success factor, however, in some cases there is still a need of this detailed focus to solve specific problems but the details may never become a higher focus than the holistic view.

Qualified products list 2

The South Carolina Department of Transportation publishes Qualified Products Listings which include pre-qualified materials that may be used on construction and maintenance projects as specified in the project proposal. This document deals with qualified coarse aggregate sources. It is broken down by supplier, location name, SCDOT number, location, fineness modulus, absorption, specific gravity, bulk SSD and soundness loss.

Qualified products list 1

The South Carolina Department of Transportation publishes Qualified Products Listings which include pre-qualified materials that may be used on construction and maintenance projects as specified in the project proposal. This document deals with qualified fine aggregate sources. It is broken down by supplier, location name, SCDOT number, location, fineness modulus, absorption, specific gravity, bulk SSD and soundness loss.

Qualified products list 2

The South Carolina Department of Transportation publishes Qualified Products Listings which include pre-qualified materials that may be used on construction and maintenance projects as specified in the project proposal. This document deals with qualified coarse aggregate sources. It is broken down by supplier, location name, SCDOT number, location, fineness modulus, absorption, specific gravity, bulk SSD and soundness loss.

SCDOT Qualified Product List 49 - Permanent Traffic Barrier Components

The South Carolina Department of Transportation publishes Qualified Products Listings which include pre-qualified materials that may be used on construction and maintenance projects as specified in the project proposal. This document deals with permanent traffic barrier components.

The application of symphytosociology in landscape architecture in the Western Mediterranean

This essay addresses the application of indigenous plants in Landscape Architecture projects, based on studies carried out in the field of phytosociology and sinphytosociology. Through this knowledge, it is possible to increase and improve the use of indigenous plants in Projects, aiming at the preservation of biodiversity. Thus, to better understand the western Mediterranean territory, we present a brief biophysical characterization, in which we point out the main factors which contribute to the ground coverage’s distribution in the landscape, namely, concerning climate (oceanity, ombroclimate and thermoclimate) and substrate (geology and lithology). In view of the high level of uniqueness of the identified conditions, a synthesis of the potential main existing climatophilous woods is carried out, regarding sinphytosocialogical class/order, furthermore, pointing out, the main serial stages, their vegetation bioindicators and the ecological peculiarities of each stage (regressive or progressive). Therefore, based on the study area, we point out the vegetation bioindicator’s value as a work tool during analysis, thus allowing us to understand the existing edaphoclimatic conditions, as well as to elaborate a quick diagnosis of each potential climatophilous vegetation series. Moreover, based on the main stages of substitution, it is also possible to identify the presence of endemic plants, or under protection status, and finally, the conservation state of the study area. Further ahead, in project proposal phase, based on information gathered previously, we point out the possibility of elaborating a list of plants correctly adapted to the existing mesologicall conditions. Thus, within each serial stage, the necessary ecological conditions for a correct adaption of the vegetation material are referred, therefore, avoiding possible limiting factors to their development, such as precipitation, soil erosion, light availability, salinity, among many others. Lastly, some considerations are made about the main ideas that should be remembered throughout this essay, namely, regarding the importance of the use of sinphytosociology’s knowledge as an analysis tool, as well as of high interest for the elaboration of proposals which aim at the floristic heritage’s conservation and the landscape’s scenic quality. Ce travail traite de l`application de plantes autochtones dans des projets d`Architecture Paysagiste ayant pour base des études réalisées dans le cadre de la phytosociologie et Symphytosociologie. À travers ces connaissances, il est possible d`incrémenter et améliorer l`utilisation de plantes autochtones dans les Projets basés sur la conservation de la biodiversité. Ainsi, afin de mieux comprendre le territorie de la méditérrannée occidentale, on présente une brève caractérisation biophysique, dans laquelle nous soulignons les principaux facteurs qui contribuent à la répartition de la végétation dans le paysage, notamment au niveau climatique (l`océanité, ombrothermique et thermoclimatique) et du substrat (géologie et lithologie). Face aux conditions, identifiées ci-dessus, élévées en originalité, il est utile d`élaborer une synthèse des principaux bois potentiels climatophiles existants au niveau de la classe/ordre symphitosociologique, en soulignant également les principales étapes de série, leurs bioindicateurs végétaux et aux particularités écologiques de chaque étape (régressive ou progressive). Ainsi, sur la base de l`interprétation de la zone d`étude, le bioindicateur végétal se distingue comme un outil de travail durant l`analyse, permettant de cette façon comprendre les conditions édapho-climatiques existantes, ainsi comme élaborer un rapide diagnostic de chaque série de végétation potentielle climatophile. En outre, sur la base des principales étapes de remplacement, il est également possible d`identifier la présence de plantes endémiques, ou avec un statut de protection et enfin l`état de conservation de la zone d`étude. Déjà au stade de proposition du projet, basée sur l`information recueillie précédemment, il y a la possibilité d`établir une liste de plantes bien adaptées aux conditions mésologiques. Ainsi, dans chaque étape de série, les conditions écologiques nécessaires à une bonne adaptation de la matière végétale sont référées, évitant ainsi des facteurs limitant à son développement, tels que les précipitations, l`érosion des soís, disponibilité de la lumière, de la salinité, parmi beaucoup d`autres. Et enfin, quelques considérations se tissent sur les principales idées à retenir tout au long du travail, notamment l`importance d`utiliser la connaissance de la symphytosociologie comme un outil d`analyse d`un grand intérêt pour la développement de propositions pour la conservation du patrimoine floristique et la qualité pittoresque du paysage.

Look before you leap : the epistemic violence that sometimes hides behind the word "inclusion"

This paper demonstrates how Indigenous Studies is controlled in some Australian universities in ways that continue the marginalisation, denigration and exploitation of Indigenous peoples. Moreover, it shows how the engagement of white notions of “inclusion” can result in the maintenance of racism, systemic marginalisation, white race privilege and radicalised subjectivity. A case study will be utilised which draws from the experience of two Indigenous scholars who were invited to be part of a panel to review one Australian university’s plan and courses in Indigenous studies. The case study offers the opportunity to destabilise the relationships between oppression and privilege and the epistemology that maintains them. The paper argues for the need to examine exactly what is being offered when universities provide opportunities for “inclusion”.

Investment decision framework for infrastructure asset management: a probability-based approach

Australia’s civil infrastructure assets of roads, bridges, railways, buildings and other structures are worth billions of dollars. Road assets alone are valued at around A$ 140 billion. As the condition of assets deteriorate over time, close to A$10 billion is spent annually in asset maintenance on Australia's roads, or the equivalent of A$27 million per day. To effectively manage road infrastructures, firstly, road agencies need to optimise the expenditure for asset data collection, but at the same time, not jeopardise the reliability in using the optimised data to predict maintenance and rehabilitation costs. Secondly, road agencies need to accurately predict the deterioration rates of infrastructures to reflect local conditions so that the budget estimates could be accurately estimated. And finally, the prediction of budgets for maintenance and rehabilitation must provide a certain degree of reliability. A procedure for assessing investment decision for road asset management has been developed. The procedure includes: • A methodology for optimising asset data collection; • A methodology for calibrating deterioration prediction models; • A methodology for assessing risk-adjusted estimates for life-cycle cost estimates. • A decision framework in the form of risk map

The challenges of participatory research with ‘tech-savvy’ youth

This paper focuses on participatory research and how it can be understood and employed when researching children and youth. The aim of this paper is to provide a theoretically and empirically grounded discussion of participatory research methodologies with respect to investigating the dynamic and evolving phenomenon of young people growing up in networked societies. Initially, we review the nature of participatory research and how other researchers have endeavoured to involve young people (children and youth) in their research projects. Our review of these approaches aims to elucidate what we see as recurring and emerging issues with respect to the methodological design of involving young people as co-researchers. In the light of these issues and in keeping with our aim, we offer a case study of our own research project that seeks to understand the ways in which high school students use new media and network ICT systems (Internet, mobile phone applications, social networking sites) to construct identities, form social relations, and engage in creative practices as part of their everyday lives. The article concludes by offering an assessment of our tripartite model of participatory research that may benefit other researchers who share a similar interest in youth and new media.

Age-related maculopathy : linking aetiology and pathophysiological changes to the ischaemia hypothesis

Age-related maculopathy (ARM) has remained a challenging topic with respect to its aetiology, pathomechanisms, early detection and treatment since the late 19th century when it was first described as its own entity. ARM was previously considered an inflammatory disease, a degenerative disease, a tumor and as the result of choroidal hemodynamic disturbances and ischaemia. The latter processes have been repeatedly suggested to have a key role in its development and progression. In vivo experiments under hypoxic conditions could be models for the ischaemic deficits in ARM. Recent research has also linked ARM with gene polymorphisms. It is however unclear what triggers a person's gene susceptibility. In this manuscript, a linking hypothesis between aetiological factors including ischaemia and genetics and the development of early clinicopathological changes in ARM is proposed. New clinical psychophysical and electrophysiological tests are introduced that can detect ARM at an early stage. Models of early ARM based upon hemodynamic, photoreceptor and post-receptoral deficits are described and the mechanisms by which ischaemia may be involved as a final common pathway are considered. In neovascular age-related macular degeneration (neovascular AMD), ischaemia is thought to promote release of vascular endothelial growth factor (VEGF) which induces chorioretinal neovascularisation. VEGF is critical in the maintenance of the healthy choriocapillaris. In the final section of the manuscript the documentation of the effect of new anti-VEGF treatments on retinal function in neovascular AMD is critically viewed.

National guidelines for digital modelling

These National Guidelines and Case Studies for Digital Modelling are the outcomes from one of a number of Building Information Modelling (BIM)-related projects undertaken by the CRC for Construction Innovation. Since the CRC opened its doors in 2001, the industry has seen a rapid increase in interest in BIM, and widening adoption. These guidelines and case studies are thus very timely, as the industry moves to model-based working and starts to share models in a new context called integrated practice. Governments, both federal and state, and in New Zealand are starting to outline the role they might take, so that in contrast to the adoption of 2D CAD in the early 90s, we ensure that a national, industry-wide benefit results from this new paradigm of working. Section 1 of the guidelines give us an overview of BIM: how it affects our current mode of working, what we need to do to move to fully collaborative model-based facility development. The role of open standards such as IFC is described as a mechanism to support new processes, and make the extensive design and construction information available to asset operators and managers. Digital collaboration modes, types of models, levels of detail, object properties and model management complete this section. It will be relevant for owners, managers and project leaders as well as direct users of BIM. Section 2 provides recommendations and guides for key areas of model creation and development, and the move to simulation and performance measurement. These are the more practical parts of the guidelines developed for design professionals, BIM managers, technical staff and ‘in the field’ workers. The guidelines are supported by six case studies including a summary of lessons learnt about implementing BIM in Australian building projects. A key aspect of these publications is the identification of a number of important industry actions: the need for BIM-compatible product information and a national context for classifying product data; the need for an industry agreement and setting process-for-process definition; and finally, the need to ensure a national standard for sharing data between all of the participants in the facility-development process.

National guidelines for digital modelling : case studies

These National Guidelines and Case Studies for Digital Modelling are the outcomes from one of a number of Building Information Modelling (BIM)-related projects undertaken by the CRC for Construction Innovation. Since the CRC opened its doors in 2001, the industry has seen a rapid increase in interest in BIM, and widening adoption. These guidelines and case studies are thus very timely, as the industry moves to model-based working and starts to share models in a new context called integrated practice. Governments, both federal and state, and in New Zealand are starting to outline the role they might take, so that in contrast to the adoption of 2D CAD in the early 90s, we ensure that a national, industry-wide benefit results from this new paradigm of working. Section 1 of the guidelines give us an overview of BIM: how it affects our current mode of working, what we need to do to move to fully collaborative model-based facility development. The role of open standards such as IFC is described as a mechanism to support new processes, and make the extensive design and construction information available to asset operators and managers. Digital collaboration modes, types of models, levels of detail, object properties and model management complete this section. It will be relevant for owners, managers and project leaders as well as direct users of BIM. Section 2 provides recommendations and guides for key areas of model creation and development, and the move to simulation and performance measurement. These are the more practical parts of the guidelines developed for design professionals, BIM managers, technical staff and ‘in the field’ workers. The guidelines are supported by six case studies including a summary of lessons learnt about implementing BIM in Australian building projects. A key aspect of these publications is the identification of a number of important industry actions: the need for BIMcompatible product information and a national context for classifying product data; the need for an industry agreement and setting process-for-process definition; and finally, the need to ensure a national standard for sharing data between all of the participants in the facility-development process.

External auditors' reliance on internal audit : the impact of sourcing arrangements and consulting activities

This study examines the impact of internal audit outsourcing and internal audit’s involvement in consulting on external auditors’ reliance on the work of internal audit. We test whether these factors influence (i) reliance on internal audit work already undertaken and (ii) the use of internal auditors as assistants. In each case, we distinguish between control evaluation and substantive testing. We find that involvement in consulting impacts reliance on work undertaken and the use of internal auditors as assistants for control evaluation. External auditors make greater use of internal auditors as assistants for substantive testing when internal audit is provided in-house. Overall, external auditors use internal audit more for control evaluation tasks than for substantive testing.