Transparent heterogeneous terrestrial optical communication networks with phase modulated signals

This thesis presents a large scale numerical investigation of heterogeneous terrestrial optical communications systems and the upgrade of fourth generation terrestrial core to metro legacy interconnects to fifth generation transmission system technologies. Retrofitting (without changing infrastructure) is considered for commercial applications. ROADM are crucial enabling components for future core network developments however their re-routing ability means signals can be switched mid-link onto sub-optimally configured paths which raises new challenges in network management. System performance is determined by a trade-off between nonlinear impairments and noise, where the nonlinear signal distortions depend critically on deployed dispersion maps. This thesis presents a comprehensive numerical investigation into the implementation of phase modulated signals in transparent reconfigurable wavelength division multiplexed fibre optic communication terrestrial heterogeneous networks. A key issue during system upgrades is whether differential phase encoded modulation formats are compatible with the cost optimised dispersion schemes employed in current 10 Gb/s systems. We explore how robust transmission is to inevitable variations in the dispersion mapping and how large the margins are when suboptimal dispersion management is applied. We show that a DPSK transmission system is not drastically affected by reconfiguration from periodic dispersion management to lumped dispersion mapping. A novel DPSK dispersion map optimisation methodology which reduces drastically the optimisation parameter space and the many ways to deploy dispersion maps is also presented. This alleviates strenuous computing requirements in optimisation calculations. This thesis provides a very efficient and robust way to identify high performing lumped dispersion compensating schemes for use in heterogeneous RZ-DPSK terrestrial meshed networks with ROADMs. A modified search algorithm which further reduces this number of configuration combinations is also presented. The results of an investigation of the feasibility of detouring signals locally in multi-path heterogeneous ring networks is also presented.

Relaxing claims:coping with uncertainty while evaluating assumptions at run time

Self-adaptation enables software systems to respond to changing environmental contexts that may not be fully understood at design time. Designing a dynamically adaptive system (DAS) to cope with this uncertainty is challenging, as it is impractical during requirements analysis and design time to anticipate every environmental condition that the DAS may encounter. Previously, the RELAX language was proposed to make requirements more tolerant to environmental uncertainty, and Claims were applied as markers of uncertainty that document how design assumptions affect goals. This paper integrates these two techniques in order to assess the validity of Claims at run time while tolerating minor and unanticipated environmental conditions that can trigger adaptations. We apply the proposed approach to the dynamic reconfiguration of a remote data mirroring network that must diffuse data while minimizing costs and exposure to data loss. Results show RELAXing Claims enables a DAS to reduce adaptation costs. © 2012 Springer-Verlag.

An aspect-oriented and model-driven approach for managing dynamic variability

Constructing and executing distributed systems that can adapt to their operating context in order to sustain provided services and the service qualities are complex tasks. Managing adaptation of multiple, interacting services is particularly difficult since these services tend to be distributed across the system, interdependent and sometimes tangled with other services. Furthermore, the exponential growth of the number of potential system configurations derived from the variabilities of each service need to be handled. Current practices of writing low-level reconfiguration scripts as part of the system code to handle run time adaptation are both error prone and time consuming and make adaptive systems difficult to validate and evolve. In this paper, we propose to combine model driven and aspect oriented techniques to better cope with the complexities of adaptive systems construction and execution, and to handle the problem of exponential growth of the number of possible configurations. Combining these techniques allows us to use high level domain abstractions, simplify the representation of variants and limit the problem pertaining to the combinatorial explosion of possible configurations. In our approach we also use models at runtime to generate the adaptation logic by comparing the current configuration of the system to a composed model representing the configuration we want to reach. © 2008 Springer-Verlag Berlin Heidelberg.

Role of GSH in estrone sulfate binding and translocation by the multidrug resistance protein 1 (MRP1/ABCC1)

Multidrug resistance protein 1 (MRP1/ABCC1) is an ATP-dependent efflux pump that can confer resistance to multiple anticancer drugs and transport conjugated organic anions. Unusually, transport of several MRP1 substrates requires glutathione (GSH). For example, estrone sulfate transport by MRP1 is stimulated by GSH, vincristine is co-transported with GSH, or GSH can be transported alone. In the present study, radioligand binding assays were developed to investigate the mechanistic details of GSH-stimulated transport of estrone sulfate by MRP1. We have established that estrone sulfate binding to MRP1 requires GSH, or its non-reducing analogue S-methyl GSH (S-mGSH), and further that the affinity (Kd) of MRP1 for estrone sulfate is 2.5-fold higher in the presence of S-mGSH than GSH itself. Association kinetics show that GSH binds to MRP1 first, and we propose that GSH binding induces a conformational change, which makes the estrone sulfate binding site accessible. Binding of non-hydrolyzable ATP analogues to MRP1 decreases the affinity for estrone sulfate. However, GSH (or S-mGSH) is still required for estrone sulfate binding, and the affinity for GSH is unchanged. Estrone sulfate affinity remains low following hydrolysis of ATP. The affinity for GSH also appears to decrease in the post-hydrolytic state. Our results indicate ATP binding is sufficient for reconfiguration of the estrone sulfate binding site to lower affinity and argue for the presence of a modulatory GSH binding site not associated with transport of this tripeptide. A model for the mechanism of GSH-stimulated estrone sulfate transport is proposed.

Contesting labour internationalism:the "old" trapped in the "new" in Volkswagen’s South African plant

During the 1970s and 1980s, close linkages were established between unionists in Volkswagen's Uitenhage plant in South Africa and Wolfsburg in Germany. The ensuing relationship resulted in trade union internationalism and solidarity with South African workers in their struggle against apartheid. After the insertion of the South African plant into the global production networks of the company, a range of new pressures and challenges confronted the union in South Africa. This resulted in the mass dismissal in 2000. In an attempt to garner international support and solidarity, the dismissed workers tapped into existing structures with no success, illustrating the reconfiguration of trade union internationalism away from worker interests to those of the unions and company. © 2010 UALE.

Meshing radial networks at 11kV

This project evaluates the benefits of meshing existing 11kV radial networks in order to reduce losses and maximise the connection of low carbon distributed generation. These networks are often arranged as radial feeders with normally-open links between two of the feeders; the link is closed only to enable continuity of supply to an isolated portion of a feeder following a fault on the network. However, this link could also be closed permanently thus operating the network as a meshed topology under non-faulted conditions. The study will look at loss savings and the addition of distributed generation on a typical network under three different scenarios; traditional radial feeders, fixed meshed network and a dynamic meshed network. The networks are compared in terms of feeder losses, capacity, voltage regulation and fault levels.

Quality of Service System Approximation in IP Networks

This paper is sponsored by the Ministry of Education and Research of the Republic of Bulgaria in the framework of project No 105 “Multimedia Packet Switching Networks Planning with Quality of Service and Traffic Management”.

To what extent and in what manner do Chinese and Indian contract research organisation learn and upgrade with the unbundling the global pharmaceutical R&D value chain?

The paper applies the GVC framework to analyse the organisational and geographical reconfiguration of the global R&D function of leading US and European pharmaceutical MNCs. Though pharmaceutical MNCs have been outsourcing clinical trial activities since the mid-1990s, the outsourcing of discovery research tasks is a phenomenon of the 2000s (Ramirez 2013). Moreover, in the context of a crisis of R&D productivity and increasing pressure from shareholders, a number of US and European pharmaceutical MNCs are breaking up their R&D function in an attempt to increase flexibility and reduce risk as well as costs and are thereby restructuring the global architecture of their R&D function. This break-up, or unbundling (Sako 2006), of the R&D function is particularly interesting given the prevalence of market failure in innovation (Howells et al 2008), the non-modular nature of the R&D process in this industry (Pisano 2006) and the strategic important of this activity to the core competence and long-term competitive advantage of firms in this sector. The focus of this paper is on the outsourcing of R&D activities to Chinese and Indian independently-owned contract research organisations (CROs) and the way these firms are becoming integrated as service providers into the global R&D function (or R&D value chain) of pharmaceutical MNCs. Above all the paper is concerned with the development of capabilities of CROs from these two countries and the dynamics of upgrading in GVCs in knowledge-intensive functions. The paper therefore discusses the role of both knowledge flows within global pharmaceutical R&D value chains as well as national innovation systems on the development of capabilities of Chinese and Indian CROs. Our analysis is based on data from semi-structured interviews collected from senior R&D managers from a sample of ten US and European pharmaceutical MNCs and owners and senior R&D managers from five Chinese and five Indian CROs who are providing research services to MNCs in this industry. We discuss the emergence of R&D outsourcing in this industry and the nature and mechanisms of knowledge flows within R&D value chains. The embeddedness of CROS in the national innovation systems of their home countries is also discussed.

Dynamic capabilities for CSR management:towards identifying common processes

Purpose – The objective of this paper is to address the question whether and how firms can follow a standard management process to cope with emerging corporate social responsibility (CSR) challenges? Both researchers and practitioners have paid increasing attention to the question because of the rapidly evolving CSR expectations of stakeholders and the limited diffusion of CSR standardization. The question was addressed by developing a theoretical framework to explain how dynamic capabilities can contribute to effective CSR management. Design/methodology/approach – Based on 64 world-leading companies’ contemporary CSR reports, we carried out a large-scale content analysis to identify and examine the common organizational processes involved in CSR management and the dynamic capabilities underpinning those management processes. Findings – Drawing on the dynamic capabilities perspective, we demonstrate how the deployment of three dynamic capabilities for CSR management, namely, scanning, sensing and reconfiguration capabilities can help firms to meet emerging CSR requirements by following a set of common management processes. The findings demonstrate that what is more important in CSR standardization is the identification and development of the underlying dynamic capabilities and the related organizational processes and routines, rather than the detailed operational activities. Originality/value - Our study is an early attempt to examine the fundamental organizational capabilities and processes involved in CSR management from the dynamic capabilities perspective. Our research findings contribute to CSR standardization literature by providing a new theoretical perspective to better understand the capabilities enabling common CSR management processes.

Implementing dynamic capabilities for corporate strategic change towards sustainability

Dynamic scanning, identification, and reconfiguration capabilities can facilitate firms' strategic change toward sustainability and higher competitive advantage in an evolving market environment.

A three-level RFID-based automation approach to enhance network competitiveness

Today, the question of how to successfully reduce supply chain costs whilst increasing customer satisfaction continues to be the focus of many firms. It is noted in the literature that supply chain automation can increase flexibility whilst reducing inefficiencies. However, in the dynamic and process driven environment of distribution, there is the absence of a cohesive automation approach to guide companies in improving network competitiveness. This paper aims to address the gap in the literature by developing a three-level framework automation application approach with the assistance of radio frequency identification (RFID) technology and returnable transport equipment (RTE). The first level considers the automation of data retrieval and highlights the benefits of RFID. The second level consists of automating distribution processes such as unloading and assembling orders. As the labour is reduced with the introduction of RFID enabled robots, the balance between automation and labour is discussed. Finally, the third level is an analysis of the decision-making process at network points and the application of cognitive automation to objects. A distribution network scenario is formed and used to illustrate network reconfiguration at each level. The research pinpoints that RFID enabled RTE offers a viable tool to assist supply chain automation. Further research is proposed in particular, the area of cognitive automation to aide with decision-making.

Efficiency improvement of non-uniformly-aged PV arrays

The utilization of solar energy by photovoltaic (PV) systems have received much research and development (R&D) attention across the globe. In the past decades, a large number of PV array have been installed. Since the installed PV arrays often operate in harsh environments, non-uniform aging can occur and impact adversely on the performance of PV systems, especially in the middle and late periods of their service life. Due to the high cost of replacing aged PV modules by new modules, it is appealing to improve energy efficiency of aged PV systems. For this purpose, this paper presents a PV module reconfiguration strategy to achieve the maximum power generation from non-uniformly aged PV arrays without significant investment. The proposed reconfiguration strategy is based on the cell-unit structure of PV modules, the operating voltage limit of gird-connected converter, and the resulted bucket-effect of the maximum short circuit current. The objectives are to analyze all the potential reorganization options of the PV modules, find the maximum power point and express it in a proposition. This proposition is further developed into a novel implementable algorithm to calculate the maximum power generation and the corresponding reconfiguration of the PV modules. The immediate benefits from this reconfiguration are the increased total power output and maximum power point voltage information for global maximum power point tracking (MPPT). A PV array simulation model is used to illustrate the proposed method under three different cases. Furthermore, an experimental rig is built to verify the effectiveness of the proposed method. The proposed method will open an effective approach for condition-based maintenance of emerging aging PV arrays.

Online two-section PV array fault diagnosis with optimized voltage sensor locations

Photovoltaic (PV) stations have been widely built in the world to utilize solar energy directly. In order to reduce the capital and operational costs, early fault diagnosis is playing an increasingly important role by enabling the long effective operation of PV arrays. This paper analyzes the terminal characteristics of faulty PV strings and arrays, and it develops a PV array fault diagnosis technique. The terminal current-voltage curve of a faulty PV array is divided into two sections, i.e., high-voltage and low-voltage fault diagnosis sections. The corresponding working points of healthy string modules and of healthy and faulty modules in an unhealthy string are then analyzed for each section. By probing into different working points, a faulty PV module can be located. The fault information is of critical importance for the maximum power point tracking and the array dynamical reconfiguration. Furthermore, the string current sensors can be eliminated, and the number of voltage sensors can be reduced by optimizing voltage sensor locations. Typical fault scenarios including monostring, multistring, and a partial shadow for a 1.6-kW 3 $times$ 3 PV array are presented and experimentally tested to confirm the effectiveness of the proposed fault diagnosis method.

Geometrical optimization of a fast pyrolysis bubbling fluidized bed reactor using comutational fluid dynamics

This paper analyzes the physical phenomena that take place inside an 1 kg/h bubbling fluidized bed reactor located at Aston University and presents a geometrically modified version of it, in order to improve certain hydrodynamic and gas flow characteristics. The bed uses, in its current operation, 40 L/min of N2 at 520 °C fed through a distributor plate and 15 L/min purge gas stream, i.e., N2 at 20 °C, via the feeding tube. The Eulerian model of FLUENT 6.3 is used for the simulation of the bed hydrodynamics, while the k - ε model accounts for the effect of the turbulence field of one phase on the other. The three-dimensional simulation of the current operation of the reactor showed that a stationary bubble was formed next to the feeding tube. The size of the permanent bubble reaches up to the splash zone of the reactor, without any fluidizaton taking place underneath the feeder. The gas flow dynamics in the freeboard of the reactor is also analyzed. A modified version of the reactor is presented, simulated, and analyzed, together with a discussion on the impact of the flow dynamics on the fast pyrolysis of biomass. © 2010 American Chemical Society.

Mobile bluetooth-based multi-player game development in ubiquitous computing

This paper describes the use of Bluetooth and Java-Based technologies in developing a multi-player mobile game in ubiquitous computing, which strongly depends on automatic contextual reconfiguration and context-triggered actions. Our investigation focuses on an extended form of ubiquitous computing which game software developers utilize to develop games for players. We have developed an experimental ubiquitous computing application that provides context-aware services to game server and game players in a mobile distributed computing system. Obviously, contextual services provide useful information in a context-aware system. However, designing a context-aware game is still a daunting task and much theoretical and practical research remains to be done to reach the ubiquitous computing era. In this paper, we present the overall architecture and discuss, in detail, the implementation steps taken to create a Bluetooth and Java based context-aware game. We develop a multi-player game server and prepare the client and server codes in ubiquitous computing, providing adaptive routines to handle connection information requests, logging and context formatting and delivery for automatic contextual reconfiguration and context-triggered actions. © 2010 Binary Information Press.