Effects of hydrocarbons on reproductive physiology of the pearl oyster, Pinctada fucata

There are a lot of evidence that show hvdrocarbones cause some defect in reproduction and growth of bivalves. Bivalves are filter-feeder, thus accumulate more hydrocarbones in their tissue. In this study adult pearl producing oysters (Pinctada fucata) are used for all experimens. Samples of oysters, water and sediment from four natural beds; Nakhiloo (clean), Hendurabi (semipolluted), Lavan 1 (semipolluted) and Lavan 2 (polluted) were gatherd for 13 succesive months. Temperature, salinity, pH, oxygen and turbidity were recorded in each sampling. Oysters were kept in laboratory for adapation and then their length (DVM) were measured. Hemolymph samples were collected by insuline syring. Sediments and soft tissues of oysters were dissolved in carbon tetrachloride and when heated to extract oil hydrocarbones. UV, GC and IR were used to assay oil hydrocarbones. Accumulation of hydrocabones in soft tissue were as follows : Kakhiloospawning in oysters, major one in late spring and minor one in mid fall. Little elevation of progesterone start gamete and a lot of elevation release gametes_ Esteradiols gradually increase during gametogenesis and reach to maximum level during vitellogenesis. Testosterone have a synergestic role which esteradiol during vitellogenesis and also is effective in male sexuality. Multi regression test showed that there isn't meaning relationship (P<0.05) between hydrocarbones pollution and esteradiols. However in Lavan 2 due to hormone concentration of hydrocarbones had some effect in sexual hormonal cycles. Turbidity was the most effective factor for releasing of progesterone. Progesterone was a stimulating factor for releasing estradiol also release of testosterone was corrolated with oxygen and depth of beds. One way analysis of variance showed that there is not significant relasionship (P<0.05) between different factory in stations.

Survey of reproductive physiology on Epinephelus coioides in Khozestan province, Persian Gulf

Epinephelus coioides (family serranidae) is protogynous. This species is one of the most important fishes in food chain of marine proteins of persian Gulf. Therefore knowing about the reproductive biology and physiology of this species is an important role on aquaculture procedures. Monthly samples of Epinephelus coioides were obtained in khozestan Bahrekan province from 2001 to 2002 for annual variation of base line of reproductive hormone. The hormones such as: 17-B estradiol, Testosteron, Progesterone, Gonadotropin I ,II GTHI, II) and cortisol have assayed and also different stages of gonads from the histological point of view were studied by light and electron microscope. Aditional to morphometric and fecundity measurements, the important factors such as : Gonadosomatic index (GSI) Hepatosomotic index (HSI) and Condition factor (KF) were also studied. Environmental factors such as temperature, salinity, photoperiod and pH were analyzed for the determination of effective factors responsible for the changes of reproductive cycles. The flactmation of estroid hormones and gonadotropines show a significant variation in different stages of maturation, e.g 17-B estradiol's concentration in the third stages, GTH II in fourth stages of sexual maturation or final oocyte maturation, plasma Testosteron in post ovulation and Progesterone during maturation indicates the highest levels of above mentioned hormones. The total calcium concentration was high in all year. calcium concentration was correlated with GTH II synthesis and increases with GTH II in June. 17-B estradiol concentration was also correlated with GSI. The high concentration of cortisol throughout the year was an index of stress and development of ovary maturational processes. This species was protogynous synchronous hermaphrodites , and belongs to annual spawning species, being monandric. The sexual transition was found to occure in individuals of 51.2- 105 cm in length. GSI and HSI level confirms the time of spawning period is in April- June. Electrone microscopic studies of gonad tissues showed some changes in mitochondria and endoplasmic reticulum in the post ovulation, maturation and post spawning periods. During the monthly sampling the biochemistry of tissues variations indicated decrease in protein and lipid content, but an increase in water content of spawning fishes which was correlated to the maturation of Epinephelus coioides . sex ratio indicative of higher frequences of females to males during monthly sampling periods. The females were smaller than males in sizes, therefore the females lived in 8-15m depth, but males were living in upper limits of depth. The results indicated that the temperature was the most effective parameter in reproductive cycle of Epinephelus coioides and the mean 24°c was a convenient temperature for spawning. Photoperiod was the second effective. factor on the reproductive cycle for this species. It seemed that the increase in the photoperiod between January to May caused a development of the oocyte. Regarding to the results of this research, it seems that the period of spawning in Epinephelus coioides is in May- June and the aquaculture procedure of Epinephelus coioides could be performed in the above mentioned periods.

A cost-effective atomic force microscope for undergraduate control laboratories

This paper presents a simple, cost-effective and robust atomic force microscope (AFM), which has been purposely designed and built for use as a teaching aid in undergraduate controls labs. The guiding design principle is to have all components be open and visible to the students, so the inner functioning of the microscope has been made clear to see. All of the parts but one are off the shelf, and assembly time is generally less than two days, which makes the microscope a robust instrument that is readily handled by the students with little chance of damage. While the scanning resolution is nowhere near that of a commercial instrument, it is more than sufficient to take interesting scans of micrometer-scale objects. A survey of students after their having used the AFM resulted in a generally good response, with 80% agreeing that they had a positive learning experience. © 2009 IEEE.

Permeability and stiffness of sands at very low effective stresses

Loose saturated sandy soils may undergo liquefaction under cyclic loading, generating positive excess pore pressures due to their contractile nature and inability to dissipate pore pressures rapidly during earthquake loading. These liquefied soils have a near-zero effective stress state, and hence have very low strength and stiffness, causing severe damage to structures founded upon them. The duration for which this near-zero effective stress state persists is a function of the rate of reconsolidation of the liquefied soil, which in turn is a function of the permeability and stiffness of the soil at this very low effective stress. Existing literature based on observation of physical model tests suggests that the consolidation coefficient C v associated with this reconsolidation of liquefied sand is significantly lower than that of the same soil at moderate stress levels. In this paper, the results of a series of novel fluidisation tests in which permeability k and coefficient of consolidation C v were independently measured will be presented. These results allow calculation of the variation of stiffness E 0 and permeability k with effective stress. It is shown that while permeability increases markedly at very low effective stresses, the simultaneous drop in stiffness measured results in a decrease in consolidation coefficient and hence an increase in the duration for which the soil remains liquefied.

Cost-effective 10 Gb/s polymer-based chip-to-chip optical interconnect

Board-level optical links are an attractive alternative to their electrical counterparts as they provide higher bandwidth and lower power consumption at high data rates. However, on-board optical technology has to be cost-effective to be commercially deployed. This study presents a chip-to-chip optical interconnect formed on an optoelectronic printed circuit board that uses a simple optical coupling scheme, cost-effective materials and is compatible with well-established manufacturing processes common to the electronics industry. Details of the link architecture, modelling studies of the link's frequency response, characterisation of optical coupling efficiencies and dynamic performance studies of this proof-of-concept chip-to-chip optical interconnect are reported. The fully assembled link exhibits a -3 dBe bandwidth of 9 GHz and -3 dBo tolerances to transverse component misalignments of ±25 and ±37 μm at the input and output waveguide interfaces, respectively. The link has a total insertion loss of 6 dBo and achieves error-free transmission at a 10 Gb/s data rate with a power margin of 11.6 dBo for a bit-error-rate of 10 -12. The proposed architecture demonstrates an integration approach for high-speed board-level chip-to-chip optical links that emphasises component simplicity and manufacturability crucial to the migration of such technology into real-world commercial systems. © 2012 The Institution of Engineering and Technology.

A global model for effective use and evaluation of e-learning in health.

Healthcare systems worldwide face a wide range of challenges, including demographic change, rising drug and medical technology costs, and persistent and widening health inequalities both within and between countries. Simultaneously, issues such as professional silos, static medical curricula, and perceptions of "information overload" have made it difficult for medical training and continued professional development (CPD) to adapt to the changing needs of healthcare professionals in increasingly patient-centered, collaborative, and/or remote delivery contexts. In response to these challenges, increasing numbers of medical education and CPD programs have adopted e-learning approaches, which have been shown to provide flexible, low-cost, user-centered, and easily updated learning. The effectiveness of e-learning varies from context to context, however, and has also been shown to make considerable demands on users' motivation and "digital literacy" and on providing institutions. Consequently, there is a need to evaluate the effectiveness of e-learning in healthcare as part of ongoing quality improvement efforts. This article outlines the key issues for developing successful models for analyzing e-health learning.