Source wavelet estimation for waveform inversion of crosshole georadar data

AbstractFor a wide range of environmental, hydrological, and engineering applications there is a fast growing need for high-resolution imaging. In this context, waveform tomographic imaging of crosshole georadar data is a powerful method able to provide images of pertinent electrical properties in near-surface environments with unprecedented spatial resolution. In contrast, conventional ray-based tomographic methods, which consider only a very limited part of the recorded signal (first-arrival traveltimes and maximum first-cycle amplitudes), suffer from inherent limitations in resolution and may prove to be inadequate in complex environments. For a typical crosshole georadar survey the potential improvement in resolution when using waveform-based approaches instead of ray-based approaches is in the range of one order-of- magnitude. Moreover, the spatial resolution of waveform-based inversions is comparable to that of common logging methods. While in exploration seismology waveform tomographic imaging has become well established over the past two decades, it is comparably still underdeveloped in the georadar domain despite corresponding needs. Recently, different groups have presented finite-difference time-domain waveform inversion schemes for crosshole georadar data, which are adaptations and extensions of Tarantola's seminal nonlinear generalized least-squares approach developed for the seismic case. First applications of these new crosshole georadar waveform inversion schemes on synthetic and field data have shown promising results. However, there is little known about the limits and performance of such schemes in complex environments. To this end, the general motivation of my thesis is the evaluation of the robustness and limitations of waveform inversion algorithms for crosshole georadar data in order to apply such schemes to a wide range of real world problems.One crucial issue to making applicable and effective any waveform scheme to real-world crosshole georadar problems is the accurate estimation of the source wavelet, which is unknown in reality. Waveform inversion schemes for crosshole georadar data require forward simulations of the wavefield in order to iteratively solve the inverse problem. Therefore, accurate knowledge of the source wavelet is critically important for successful application of such schemes. Relatively small differences in the estimated source wavelet shape can lead to large differences in the resulting tomograms. In the first part of my thesis, I explore the viability and robustness of a relatively simple iterative deconvolution technique that incorporates the estimation of the source wavelet into the waveform inversion procedure rather than adding additional model parameters into the inversion problem. Extensive tests indicate that this source wavelet estimation technique is simple yet effective, and is able to provide remarkably accurate and robust estimates of the source wavelet in the presence of strong heterogeneity in both the dielectric permittivity and electrical conductivity as well as significant ambient noise in the recorded data. Furthermore, our tests also indicate that the approach is insensitive to the phase characteristics of the starting wavelet, which is not the case when directly incorporating the wavelet estimation into the inverse problem.Another critical issue with crosshole georadar waveform inversion schemes which clearly needs to be investigated is the consequence of the common assumption of frequency- independent electromagnetic constitutive parameters. This is crucial since in reality, these parameters are known to be frequency-dependent and complex and thus recorded georadar data may show significant dispersive behaviour. In particular, in the presence of water, there is a wide body of evidence showing that the dielectric permittivity can be significantly frequency dependent over the GPR frequency range, due to a variety of relaxation processes. The second part of my thesis is therefore dedicated to the evaluation of the reconstruction limits of a non-dispersive crosshole georadar waveform inversion scheme in the presence of varying degrees of dielectric dispersion. I show that the inversion algorithm, combined with the iterative deconvolution-based source wavelet estimation procedure that is partially able to account for the frequency-dependent effects through an "effective" wavelet, performs remarkably well in weakly to moderately dispersive environments and has the ability to provide adequate tomographic reconstructions.

Cost del tractament del SIDA i d'Hepatitis C per a l'Estat : Comparació de la despesa d'una persona en llibertat vs. un pres

Un dels principals motius que ens va impulsar en l’elecció del tema és que es tracta d’untema que pot despertar curiositat entre la població.Un altre motiu, es que varem trobar que està íntimament relacionat amb els estudis queestem cursant, donat que afecta als pressupostos de l’estat i a la seva restricciópressupostària, i per tant, està directament relacionat amb la macroeconomia. En el nostrecas, reduirem l’àmbit d’estudi al territori català, de manera que estudiarem aquestes duesmalalties dins la despesa en sanitat pública catalana. A demés, estan finançades amb elsnostres impostos, i per tant la seva despesa afecta a la restricció pressupostària delsciutadans.L’elecció d’aquestes malalties no ha estat feta a l’atzar. Inicialment, varem pensar enestudiar els costos dels interns penitenciaris que patien aquestes malalties. Com que laSIDA i d’hepatitis C són les malalties més freqüents dins la presó, i les que tenen unscostos més característics donada la complexitat dels seus tractaments, varem pensar queserien prou representatives.No obstant, a mesura que ens anàvem endinsant en el tema, ens varem adonar que tambéseria molt interessant comparar el cost de les malalties amb el de les persones no recluses, iesbrinar si hi havia algun tipus de cost diferencial. És per això que varem decidir analitzaraquestes dues malalties tant dins com fora.Un altre factor que ens ha impulsat en l’elecció del tema és el fet que el nombre d’interns ales presons té un ritme de creixement constant que s’ha accelerat en els últims anys,sobretot degut a l’augment de la immigració. Això implica un augment progressiu de ladespesa, que es tradueix en una necessitat d’ingressos majors per tal de poder equilibrar larestricció de la qual parlàvem abans.També varem voler anar una mica més lluny i analitzar el pes d’aquestes malalties dins dela despesa que la generalitat ha establert per a la sanitat pública. Com les dues son MDO (malalties de declaració obligatòria ) estan finançades completament pel sector públic.L’objectiu era veure si representaven un cost tant elevat com pensàvem.OBJECTIUS DEL TREBALL:· Demostrar l’elevat cost que suposen certes malalties per l’estat.· Manifestar els canvis en el cost de les malalties amb l’evolució delstractaments.· Analitzar els costos sanitaris extres que es produeixen a les presons.· Destacar l’augment accelerat del nombre d’interns i l’augment del cost sanitarique això suposa. METODOLOGIA: Per tal de poder realitzar l’estudi comparatiu, hem hagut de calcular manualment els costosde les malalties, tot informant-nos del preu dels medicament, les dosis, el cost de lesconsultes externes,etc. A més, per a calcular el cost del tractament dins la presó, ens hemhagut d’informar dels aspectes més generals que envolten a un pres, per poder veure sirealment existeix un cost diferencial respecte la malaltia a l’exterior. Per obtenir aquestesdiverses informacions, ens hem hagut de posar en contacte amb el personal que treballa ala presó que hem pres com a model d’estudi.Així, podem dividir les nostres fonts d’informació en 3 categories:• Obtenció d’informació directament amb el personal de la presó:– Entrevista amb la directora d’infermeria de la Secretaria de ServeisPenitenciaris, Rehabilitació i Justícia Juvenil– Entrevista amb la Cap d’infermeria del Centre Quatre Camins.• Informació a partir de mostres facilitades pels propis funcionaris de la presó• Informació a partir d’estudis sobre el tema i de dades oficials, concretament lesdades oficials sobre els Pressupostos de la Generalitat.

Työvaiheen kustannustietojen analysointi ja hyödyntäminen

Rakennushankkeen päämääränä on toteuttaa hanke sopimusten ja suunnitelmien mukaisesti. Koko hankkeen kustannus- ja aikatavoite eivät riitä ohjaamaan tuotantoa, vaan projektien hallinnan helpottamiseksi kokonaisuus on pilkottava osiin, tehtäviin, jotka suunnitellaan, budjetoidaan ja valvotaan itsenäisinä kokonaisuuksina. Työtehtävä on ajallisesti yhtenäinen työpanoksia vaativa kokonaisuus, jonka kustannus- ja aikatavoitteet voidaan määritellä. Yksittäisen tehtävän tavoitteet, vaatimukset ja aloitusedellytykset selkeytetään ja varmistetaan tehtäväsuunnittelulla. Tehtäväsuunnittelu on tapa suunnitella ja ohjata yksittäisiä tehtäviä ja varmistaa niiden kautta, että koko työmaan tuotanto etenee suunnitelmien ja tavoitteiden mukaisesti sekä saavuttaa sille asetetut kokonaistavoitteet. Yksi tehtäväsuunnittelun osa on tehtävän kustannusten tarkkailu, jolla varmistetaan, että työvaiheen tuotanto etenee suunnitellulla tavalla ja, että tuotantosuunnitelma ja tavoite saavutetaan. Vaikka uudisrakennuskohteissa tehtävien työmenekit toistuvat suunnilleen samoina, saattavat työmaalla toteutuneet kustannukset erota laskennan tavoitearviosta oleellisesti. Tämän insinöörityön tavoitteena oli selvittää YIT Rakennus Oy:n tavoitearvioiden, tuotettujen tehtäväsuunnitelmien mukaisten kustannusten, tarkekirjausten ja toteutuneiden kustannusten välisiä eroja, sekä yhdistää tietoketju työmaalta tehtäväsuunnitelman ja tarkekirjauksen kautta kustannuslaskentaan niin, että se toimii myös työmaan toimintaa parantavana prosessina. Samalla tehtävänä oli myös parantaa YIT Rakennus Oy:n tehtäväsuunnitelma- ja tarkekirjauspohjia. Vertaamalla neljän yksittäisen tehtävän tavoitearvion, tehtäväsuunnitelmassa tarkastettujen suunnitelmien ja kustannusten ja toteutuneiden kustannusten eroja eri kustannuslajeilla ja analysoimalla niitä, saatiin selville, mistä nämä erot voivat johtua ja mitkä ovat yleisimmät syyt eroihin tehtävästä riippumatta. Selkeitä syitä tehtävien tavoitearvioiden, tehtäväsuunnitelmien mukaisten kustannusten ja toteutuneiden kustannusten välisiin eroihin löytyi yhteensä 15. Näistä useimmiten toistuivat laskennan tavoitearviosta poikkeava urakkamuoto, keskituntiansion suuruus sekä aikataulu- ja materiaalimuutokset. Työssä tehdyt uudet tehtäväsuunnitelma-, tarkekirjaus- ja palauteanalyysipohjat yhdistävät tietoketjun työvaiheiden kustannuksista työmaalta laskentaan. Tavoitearvioita täsmentävänä prosessina tietoketjulla on siten myös työmaan toimintaa parantava vaikutus.

Parameter estimation for the distribution of single cell lag times.

In Quantitative Microbial Risk Assessment, it is vital to understand how lag times of individual cells are distributed over a bacterial population. Such identified distributions can be used to predict the time by which, in a growth-supporting environment, a few pathogenic cells can multiply to a poisoning concentration level. We model the lag time of a single cell, inoculated into a new environment, by the delay of the growth function characterizing the generated subpopulation. We introduce an easy-to-implement procedure, based on the method of moments, to estimate the parameters of the distribution of single cell lag times. The advantage of the method is especially apparent for cases where the initial number of cells is small and random, and the culture is detectable only in the exponential growth phase.

Panel index VAR models: Specification, Estimation, Testing and Leading Indicators

This paper proposes a method to conduct inference in panel VAR models with cross unit interdependencies and time variations in the coefficients. The approach can be used to obtain multi-unit forecasts and leading indicators and to conduct policy analysis in a multiunit setups. The framework of analysis is Bayesian and MCMC methods are used to estimate the posterior distribution of the features of interest. The model is reparametrized to resemble an observable index model and specification searches are discussed. As an example, we construct leading indicators for inflation and GDP growth in the Euro area using G-7 information.

Direct cost of connecting, maintaining and disconnecting patient-controlled analgesia pump

Quantitative research that aimed to identify the mean total cost (MTC) of connecting, maintaining and disconnecting patient-controlled analgesia pump (PCA) in the management of pain. The non-probabilistic sample corresponded to the observation of 81 procedures in 17 units of the Central Institute of the Clinics Hospital, Faculty of Medicine, University of Sao Paulo. We calculated the MTC multiplying by the time spent by nurses at a unit cost of direct labor, adding the cost of materials and medications/solutions. The MTC of connecting was R$ 107.91; maintenance R$ 110.55 and disconnecting R$ 4.94. The results found will subsidize discussions about the need to transfer money from the Unified Health System to hospitals units that perform this technique of analgesic therapy and it will contribute to the cost management aimed at making efficient and effective decision-making in the allocation of available resources.

Direct Cost of Reprocessing Cotton-woven Surgical Drapes: a Case Study

OBJECTIVE Identify the direct cost of reprocessing double and single cotton-woven drapes of the surgical LAP package. METHOD A quantitative, exploratory and descriptive case study, performed at a teaching hospital. The direct cost of reprocessing cotton-woven surgical drapes was calculated by multiplying the time spent by professionals involved in reprocessing the unit with the direct cost of labor, adding to the cost of materials. The Brazilian currency (R$) originally used for the calculations was converted to US currency at the rate of US$0.42/R$. RESULTS The average total cost for surgical LAP package was US$9.72, with the predominance being in the cost of materials (US$8.70 or 89.65%). It is noteworthy that the average total cost of materials was mostly impacted by the cost of the cotton-woven drapes (US$7.99 or 91.90%). CONCLUSION The knowledge gained will subsidize discussions about replacing reusable cotton-woven surgical drapes for disposable ones, favoring arguments regarding the advantages and disadvantages of this possibility considering human resources, materials, as well as structural, environmental and financial resources.

Cost of nursing turnover in a Teaching Hospital

Abstract OBJECTIVE To map the sub processes related to turnover of nursing staff and to investigate and measure the nursing turnover cost. METHOD This is a descriptive-exploratory study, classified as case study, conducted in a teaching hospital in the southeastern, Brazil, in the period from May to November 2013. The population was composed by the nursing staff, using Nursing Turnover Cost Calculation Methodology. RESULTS The total cost of turnover was R$314.605,62, and ranged from R$2.221,42 to R$3.073,23 per employee. The costs of pre-hire totaled R$101.004,60 (32,1%), and the hiring process consumed R$92.743,60 (91.8%) The costs of post-hire totaled R$213.601,02 (67,9%), for the sub process decreased productivity, R$199.982,40 (93.6%). CONCLUSION The study identified the importance of managing the cost of staff turnover and the financial impact of the cost of the employee termination, which represented three times the average salary of the nursing staff.

Are Standards Always Protectionist?

We analyze the effects of a domestic standard that reduces an externality associated with the consumption of the good targeted by the standard, using a model in which foreign and domestic producers compete in the domestic good market. Producers can reduce expected damage associated with the externality by incurring a cost that varies by source of origin. Despite potential protectionism, the standard is useful in correcting the consumption externality in the domestic country. Protectionism occurs when the welfare-maximizing domestic standard is higher than the international standard maximizing welfare inclusive of foreign profits. The standard is actually anti-protectionist when foreign producers are much more efficient at addressing the externality than are domestic producers. Possible exclusion of domestic or foreign producers arises with large standards, which may alter the classification of a standard as protectionist or non-protectionist. The paper provides important implications for the estimation and use of tariff equivalents of nontariff barriers.

Estimation du débit de filtration glomérulaire par la formule DFG = K x T/Pcr [Estimation of glomerular filtration rate by the formula GFR = K x T/Pc].

BACKGROUND: Creatinine clearance is the most common method used to assess glomerular filtration rate (GFR). In children, GFR can also be estimated without urine collection, using the formula GFR (mL/min x 1.73 m2) = K x height [cm]/Pcr [mumol/L]), where Pcr represents the plasma creatinine concentration. K is usually calculated using creatinine clearance (Ccr) as an index of GFR. The aim of the present study was to evaluate the reliability of the formula, using the standard UV/P inulin clearance to calculate K. METHODS: Clearance data obtained in 200 patients (1 month to 23 years) during the years 1988-1994 were used to calculate the factor K as a function of age. Forty-four additional patients were studied prospectively in conditions of either hydropenia or water diuresis in order to evaluate the possible variation of K as a function of urine flow rate. RESULTS: When GFR was estimated by the standard inulin clearance, the calculated values of K was 39 (infants less than 6 months), 44 (1-2 years) and 47 (2-12 years). The correlation between the values of GFR, as estimated by the formula, and the values measured by the standard clearance of inulin was highly significant; the scatter of individual values was however substantial. When K was calculated using Ccr, the formula overestimated Cin at all urine flow rates. When calculated from Ccr, K varied as a function of urine flow rate (K = 50 at urine flow rates of 3.5 and K = 64 at urine flow rates of 8.5 mL/min x 1.73 m2). When calculated from Cin, in the same conditions, K remained constant with a value of 50. CONCLUSIONS: The formula GFR = K x H/Pcr can be used to estimate GFR. The scatter of values precludes however the use of the formula to estimate GFR in pathophysiological studies. The formula should only be used when K is calculated from Cin, and the plasma creatinine concentration is measured in well defined conditions of hydration.

Combined audit report on the institutions under the control of the Iowa Department of Human Services including findings and recommendations and average cost per resident/patient information for the five years ended June 30, 2006

Combined audit report on the institutions under the control of the Iowa Department of Human Services including findings and recommendations and average cost per resident/patient information for the five years ended June 30, 2006