Avaliação e correlação da presença de endotoxinas e MMP-3, -8 e -9 em canais radiculares com necrose pulpar submetidos ao tratamento endodôntico - estudo in vivo

It is know that endotoxin and various matrix metalloproteinases (MMPs) are involved in the development of periapical lesions. The purpose of this study was to evaluate and correlate the presence of endotoxins and MMP- 3, MMP-8 and MMP-9 in root canals of teeth with necrotic pulp and periapical lesion before, during and after the biomechanical preparation (PBM) using a combination of different irrigations solutions and intracanal dressing. Thirty-three single-root teeth with a diagnosis of pulp necrosis and periapical lesion radiographically visible were selected. Immediately after the coronal opening was collected the first sample from the root canal content. Then, all canals were prepared (cervical and middle thirds) by oscillatory instruments (EndoEze) and irrigated by 2.5% NaOCl. After, a manual preparation was made for the apical third and the teeth were divided into three groups according to the irrigation protocol: G1) 2.5% NaOCl (4 manual files); G2) 2.5% NaOCl (2 manual files) + [Ca (OH)2 0.14%] (2 manual files) and G3) 2.5% NaOCl (2 manual files) + polymyxin B (2 manual files). After the PBM, the second sample was collected; then the third collect was performed after using EDTA final flush. The fourth sample was collected 14 days after placing the dressing [2% chlorhexidine gel + Ca(OH)2]. Quantification of endotoxins was performed by a kinetic chromogenic lysate from amoebocytes of Limulus (LAL) and quantification of MMPs by ELISA assay. The results were analyzed statistically by Kruskal-Wallis and Dunn's test (5%) and ordinal Spearman correlation. Presence of endotoxin was observed in 100% of cases and G3 showed the greatest reduction of endotoxins from the 1st to the 2nd samples (97%), being statistically similar to G2 (84.2%) and different from G1 (49.4%) (p<0.05). The intracanal dressing promoted a significant reduction of endotoxin, no difference among the groups. For...

Expansão rápida de maxila assistida cirurgicamente por meio da piezocirurgia: relato de caso

Aim: the purpose of this study is to present a case of surgically assisted rapid maxillary expansion using piezosurgery and describe the benefits of using this device in this type of procedure. Case description: patient had adento-skeletal deformity Cl III with asevereatresia of jaw and underwent a rapid maxillary expansion and surgically assisted with the use of piezosurgery. Conclusion: the piezosurgerycan be used as an alternative in oral and maxillofacial surgery wich features provide greater accuracy and safety in surgery.

Reabsorção condilar progressiva: revisão de literatura

The progressive condylar resorption is a irreversible complication that can result in malocclusion and facial deformity that can happen especially in postoperative orthognathic surgery of mandibular advancement or combined surgery. Predominantly affect young women, bearers of malocclusions of skeletal class II and with incidence of temporomandibular disorders prior to surgical treatment. Its exact etiology and pathogenesis remain unclear. The purpose of this article is to make a literature review of the last 10 years on the progressive condylar resorption. For this, we used the Medline database for articles in the English language. Then, 13 articles were found, evaluated and compared on predisposing factors, etiology, diagnosis and clinical management.

Avaliação dos fatores críticos para a seleção e aplicação clínica dos pinos de fibra: relato de caso cliínico

Teeth that have lost much of their coronal tooth structure need intraradical devices to achieve a desired retention of the restorative material, restoring aesthetics and function to the patient. For this purpose, various types of intracanal posts have been studied, of wich the fiber posts have been highlighted with its increasing use in the dental market. The purpose of this study was to present a clinical case of using fiberglass post. As well as critically analyze the published works and points of controversy described by different authors related to factors such as different protocols cementation, surface treatments pins, fracture toughness and compression, the possibility of microleakage, diameter and length of the pin, and the various materials used in conjunction with the intracanal retainers. Thus, we concluded that fiber posts showed as an excellent alternative for anterior teeth, since have least 2 mm of tooth remaining.

Microhardness of luting agents used for fiber post cementation submitted to thermo cycling

Aims and Objectives: The aim of this study was to analyze the microhardness of three resin cements used in cementing glass fiber posts in bovine incisor. The microhardness was analyzed in cervical, middle and apical thirds before and after thermocycling process. Materials and Methods: Bovine teeth were instrumented and divided into 3 groups composed of 10 teeth each. Then, the teeth were sectioned and obturated and had their canals prepared at a depth of 12mm. Once proceeded the desobturation, the roots and glass fiber posts were prepared for adhesive cementation. After cementation, the microhardness reading was carried out. After initial reading, the samples were placed in a thermocycler and subjected to 2,000 cycles and a new microhardness reading. The data collected were subjected to analysis of variance (ANOVA) and Turkey’s test. Results: It was observed a statistical difference among the microhardness of resin cements. However, the statistical difference of microhardness before and after thermocycling appeared only in group U-200. Conclusion: Thermocycling reduced microhardness values in all cements evaluated in this study. The autopolymerizing cement Multilink presented the most stable microhardness mean values after thermocycling in the coronal, middle and apical thirds.

Estética em sistema metal free associado a núcleos metalocerâmicos personalisados

The evolution of ceramic systems currently allows the manufacture of prosthesis similar to the natural teeth, meeting the expectations of patients. However, when using vitreous ceramic the color of substrate is significant for the esthetic result, requiring planning aesthetic cores when involved reconstruction of endodontically treated teeth without coronal structure. Thus, the aim of this study to describe a case report of aesthetic rehabilitation in upper anterior teeths using vitreous ceramic system for the reconstruction of elements: 11, 12, 21 and 22 after endodontically treated. It was emphasized the removal of crowns and manufacture of custom cast post and core with ceramic in coronal portion, prioritizing the aesthetic result. Through the clinical results observed can be seen that the use of custom cast post and core with ceramic in association lithium disilicate glass ceramics provided a satisfactory aesthetic result.

Emprego de ma teriais rest auradores adesivos direto no ângulo incisal de incisivos centrais fra turados

A case report of a patient who presents as chief complaint presence of stained restorations in the anterior teeth. After analysis and discussion of the clinical therapeutic approaches to be adopted, it was observed the presence of type class IV restorations on teeth 11 and 21, due to an oblique coronal fracture in the past. But the patient was not satisfied with the aesthetic result, then where was planned the realization of the removal of the restorations, for subsequently be used direct restorative materials for the correction of form, function and esthetics. The final result showed that the restorations were able to return the form, function and aesthetic dental, thereby evidencing the proven development of restorative dentistry in the solution of aesthetic problems.

Effect of peroxide bleaching on the biaxial flexural strength and modulus of bovine dentin

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Confocal laser scanning microscopy investigation of bond interfaces involved in fiber glass post cementation

Objective: This confocal microscopy study evaluated the cement/dentin and cement/post interfaces along theroot canalwallswhenfiberglasspostswerebonded to dentin using different types of cements. Material & Methods: Thirty endodontically treated premolars were divided into 3 groups according to the adhesive materials used in the bonding procedure: Prime & Bond 2.1/Self Cure + Enforce, RelyX Unicem and RelyX Luting. Rhodamine B dye was incorporated in the luting materials for the cementation of the fiber glass posts (Exacto, Angelus) to dentin. Three transversal slices (apical, middle and coronal) were examined under confocal laser scanning microscopy. Statistical analysis was performed using the Kappa, Kruskal-Wallis and Dunnet tests, in a significance level of 5%. Results: The Prime & Bond 2.1/Self Cure + Enforce presented a uniform formation of tags in the dentin but gaps in the cement/dentin interface. The RelyX Unicem and RelyX Luting presented an adhesive interface with a fewer amount of gaps, but showed shorter tag formation than the Enforce system. All cements presented the same pattern of bubbles inside the cements. The RelyX Luting presented a greater amount of cracks inside the cement in comparison with the other cements in the coronal third, while no difference was observed between RelyX Unicem and Enforce. The RelyX Luting showed the lowest quantity of cement penetration into the post. Conclusion: In general, the quality of bonding interfaces of fiber posts luted to root canals was affected by both location and type of cement.

Expansão rápida de maxila assistida cirurgicamente por meio da piezocirurgia: relato de caso

Aim: the purpose of this study is to present a case of surgically assisted rapid maxillary expansion using piezosurgery and describe the benefits of using this device in this type of procedure. Case description: patient had adento-skeletal deformity Cl III with asevereatresia of jaw and underwent a rapid maxillary expansion and surgically assisted with the use of piezosurgery. Conclusion: the piezosurgerycan be used as an alternative in oral and maxillofacial surgery wich features provide greater accuracy and safety in surgery

Influência do veículo na remoção da pasta tri antibiótica do canal radicular

Pós-graduação em Ciência Odontólogica - FOA

Níveis de fósforo em dietas para Zebrafish Danio rerio

Pós-graduação em Zootecnia - FMVZ

Surgical interventions for treating pectus excavatum

Pectus excavatum is characterized by a depression of the anterior chest wall (sternum and lower costal cartilages) and is the most frequently occurring chest wall deformity. The prevalence ranges from 6.28 to 12 cases per 1000 around the world. Generally pectus excavatum is present at birth or is identified after a few weeks or months; however, sometimes it becomes evident only at puberty. The consequence of the condition on a individual’s life is variable, some live a normal life and others have physical and psychological symptoms such as: precordial pain after exercises; impairments of pulmonary and cardiac function; shyness and social isolation. For many years, sub-perichondrial resection of the costal cartilages, with or without transverse cuneiform osteotomy of the sternum and placement of a substernal support, called conventional surgery, was the most accepted option for surgical repair of these patients. From 1997 a new surgical repair called, minimally invasive surgery, became available. This less invasive surgical option consists of the retrosternal placement of a curved metal bar, without resections of the costal cartilages or sternum osteotomy, and is performed by videothoracoscopy. However, many aspects that relate to the benefits and harms of both techniques have not been defined. Objectives To evaluate the effectiveness and safety of the conventional surgery compared with minimally invasive surgery for treating people with pectus excavatum. Search methods With the aim of increasing the sensitivity of the search strategy we used only terms related to the individual’s condition (pectus excavatum); terms related to the interventions, outcomes and types of studies were not included. We searched the Cochrane Central Register of Controlled Trials (CENTRAL), PubMed, Embase, LILACS, and ICTPR. Additionally we searched yet reference lists of articles and conference proceedings. All searches were done without language restriction.

Características fenotípicas do nanismo em pôneis neonatos: relato de casos

Three newborn Mini-Horses and one Brazilian Pony horses were presented to the Veterinary Hospital with phenotypic appearance of dwarfism. They had relatively larger head conformation, occlusive dental defect and musculoskeletal changes such as abnormal short limbs and deformation on the third metatarsal bone. The radiographic examination showed abnormal growth plates on femoral condyle and proximal thirds metatarsal bones. Due to the high possibility of future complications and quality of life loss, the animals were euthanized. We emphasize the importance of recognition of phenotypic changes related to dwarfism in horses, enabling the phenotypic diagnosis can direct crossings for nontransmission of this abnormality as genetic inheritance.

Efeito na adesão de pinos de fibra de vidro na dentina radicular após irrigação com diferentes formulações de ácido peracético e cimentação com RelyX U200

Pós-graduação em Odontologia - FOAR