The FIREDASS (Fire Detection and Suppression Simulation) Model

The FIREDASS (FIRE Detection And Suppression Simulation) project is concerned with the development of fine water mist systems as a possible replacement for the halon fire suppression system currently used in aircraft cargo holds. The project is funded by the European Commission, under the BRITE EURAM programme. The FIREDASS consortium is made up of a combination of Industrial, Academic, Research and Regulatory partners. As part of this programme of work, a computational model has been developed to help engineers optimise the design of the water mist suppression system. This computational model is based on Computational Fluid Dynamics (CFD) and is composed of the following components: fire model; mist model; two-phase radiation model; suppression model and detector/activation model. The fire model - developed by the University of Greenwich - uses prescribed release rates for heat and gaseous combustion products to represent the fire load. Typical release rates have been determined through experimentation conducted by SINTEF. The mist model - developed by the University of Greenwich - is a Lagrangian particle tracking procedure that is fully coupled to both the gas phase and the radiation field. The radiation model - developed by the National Technical University of Athens - is described using a six-flux radiation model. The suppression model - developed by SINTEF and the University of Greenwich - is based on an extinguishment crietrion that relies on oxygen concentration and temperature. The detector/ activation model - developed by Cerberus - allows the configuration of many different detector and mist configurations to be tested within the computational model. These sub-models have been integrated by the University of Greenwich into the FIREDASS software package. The model has been validated using data from the SINTEF/GEC test campaigns and it has been found that the computational model gives good agreement with these experimental results. The best agreement is obtained at the ceiling which is where the detectors and misting nozzles would be located in a real system. In this paper the model is briefly described and some results from the validation of the fire and mist model are presented.

Second-order cyclostationarity-based detection and classification of LTE SC-FDMA signals for cognitive radio

Cognitive radio (CR) was developed for utilizing the spectrum bands efficiently. Spectrum sensing and awareness represent main tasks of a CR, providing the possibility of exploiting the unused bands. In this thesis, we investigate the detection and classification of Long Term Evolution (LTE) single carrier-frequency division multiple access (SC-FDMA) signals, which are used in uplink LTE, with applications to cognitive radio. We explore the second-order cyclostationarity of the LTE SC-FDMA signals, and apply results obtained for the cyclic autocorrelation function to signal detection and classification (in other words, to spectrum sensing and awareness). The proposed detection and classification algorithms provide a very good performance under various channel conditions, with a short observation time and at low signal-to-noise ratios, with reduced complexity. The validity of the proposed algorithms is verified using signals generated and acquired by laboratory instrumentation, and the experimental results show a good match with computer simulation results.

Automatic Incident Detection and Driver Warning in PORTICO.

This paper focuses on the low-volume incident detection and subsequent driver warning objectives of the PORTICO project. It proposes Automatic Incident Detection (AID) which uses a multimodel approach comprised of a number of different algorithms. A set of thresholds and conditions are defined which determine which algorithm(s) need to indicate an incident under different traffic conditions in order to trigger an alarm

Microcantilever sensors for biochemical detection and analysis

Biochemical agents, including bacteria and toxins, are potentially dangerous and responsible for a wide variety of diseases. Reliable detection and characterization of small samples is necessary in order to reduce and eliminate their harmful consequences. Microcantilever sensors offer a potential alternative to the state of the art due to their small size, fast response time, and the ability to operate in air and liquid environments. At present, there are several technology limitations that inhibit application of microcantilever to biochemical detection and analysis, including difficulties in conducting temperature-sensitive experiments, material inadequacy resulting in insufficient cell capture, and poor selectivity of multiple analytes. This work aims to address several of these issues by introducing microcantilevers having integrated thermal functionality and by introducing nanocrystalline diamond as new material for microcantilevers. Microcantilevers are designed, fabricated, characterized, and used for capture and detection of cells and bacteria. The first microcantilever type described in this work is a silicon cantilever having highly uniform in-plane temperature distribution. The goal is to have 100 μm square uniformly heated area that can be used for thermal characterization of films as well as to conduct chemical reactions with small amounts of material. Fabricated cantilevers can reach above 300C while maintaining temperature uniformity of 2−4%. This is an improvement of over one order of magnitude over currently available cantilevers. The second microcantilever type is a doped single crystal silicon cantilever having a thin coating of ultrananocrystalline diamond (UNCD). The primary application of such a device is in biological testing, where diamond acts as a stable, electrically isolated reaction surface while silicon layer provides controlled heating with minimum variations in temperature. This work shows that composite cantilevers of this kind are an effective platform for temperature-sensitive biological experiments, such as heat lysing and polymerase chain reaction. The rapid heat-transfer of Si-UNCD cantilever compromised the membrane of NIH 3T3 fibroblast and lysed the cell nucleus within 30 seconds. Bacteria cells, Listeria monocytogenes V7, were shown to be captured with biotinylated heat-shock protein on UNCD surface and 90% of all viable cells exhibit membrane porosity due to high heat in 15 seconds. Lastly, a sensor made solely from UNCD diamond is fabricated with the intention of being used to detect the presence of biological species by means of an integrated piezoresistor or through frequency change monitoring. Since UNCD diamond has not been previously used in piezoresistive applications, temperature-denpendent piezoresistive coefficients and gage factors are determined first. The doped UNCD exhibits a significant piezoresistive effect with gauge factor of 7.53±0.32 and a piezoresistive coefficient of 8.12×10^−12 Pa^−1 at room temperature. The piezoresistive properties of UNCD are constant over the temperature range of 25−200C. 300 μm long cantilevers have the highest sensitivity of 0.186 m-Ohm/Ohm per μm of cantilever end deflection, which is approximately half that of similarly sized silicon cantilevers. UNCD cantilever arrays were fabricated consisting of four sixteen-cantilever arrays of length 20–90 μm in addition to an eight-cantilever array of length 120 μm. Laser doppler vibrometry (LDV) measured the cantilever resonant frequency, which ranged as 218 kHz−5.14 MHz in air and 73 kHz−3.68 MHz in water. The quality factor of the cantilever was 47−151 in air and 18−45 in water. The ability to measure frequencies of the cantilever arrays opens the possibility for detection of individual bacteria by monitoring frequency shift after cell capture.

Hazelnut Allergens: Molecular Characterisation, Detection and Clinical Relevance

In the last years, special attention has been devoted to food-induced allergies, from which hazelnut allergy is highlighted. Hazelnut is one of the most commonly consumed tree nuts, being largely used by the food industry in a wide variety of processed foods. It has been regarded as a food with potential health benefits, but also as a source of allergens capable of inducing mild to severe allergic reactions in sensitised individuals. Considering the great number of reports addressing hazelnut allergens, with an estimated increasing trend, this review intends to assemble all the relevant information available so far on the main issues: prevalence of tree nut allergy, clinical threshold levels, molecular characterisation of hazelnut allergens (Cor a 1, Cor a 2, Cor a 8, Cor a 9, Cor a 10, Cor a 11, Cor a 12, Cor a 14 and Cor a TLP) and their clinical relevance, and methodologies for hazelnut allergen detection in foods. A comprehensive overview on the current data about the molecular characterisation of hazelnut allergens is presented, relating biochemical classification and biological function with clinical importance. Recent advances on hazelnut allergen detection methodologies are summarised and compared, including all the novel protein- and DNA-based approaches.

'Malicious Code Execution Detection and Response Immune System inspired by the Danger Theory'

The analysis of system calls is one method employed by anomaly detection systems to recognise malicious code execution. Similarities can be drawn between this process and the behaviour of certain cells belonging to the human immune system, and can be applied to construct an artificial immune system. A recently developed hypothesis in immunology, the Danger Theory, states that our immune system responds to the presence of intruders through sensing molecules belonging to those invaders, plus signals generated by the host indicating danger and damage. We propose the incorporation of this concept into a responsive intrusion detection system, where behavioural information of the system and running processes is combined with information regarding individual system calls.

Neuronal Assembly Detection and Cell Membership Specification by Principal Component Analysis

LOPES-DOS-SANTOS, V. , CONDE-OCAZIONEZ, S. ; NICOLELIS, M. A. L. , RIBEIRO, S. T. , TORT, A. B. L. . Neuronal assembly detection and cell membership specification by principal component analysis. Plos One, v. 6, p. e20996, 2011.

Lie detection and children: Impact of the mode of presentation

Although a great deal of research has examined lie-detection among adults, little research has examined the differences between audio and visual mediums for deception among children. In the current study participants were presented (n = 42) with recordings of four children, each describing his/her experience of getting glasses. Two of the accounts were truthful, two were fabricated. Half of the participants were presented with videos, half were presented with audio-recordings. Following the presentation of each recording, participants responded to questions regarding the truthfulness of each child’s account. Results showed that when evaluating truth-tellers, participants’ lie-detection accuracy was significantly greater than chance. Within the video condition, non-parents were shown to report significantly more lie-related cues than parents. Several deception cues were shown to be related to lie-detection accuracy.

Rapid detection and quantification of the marine toxic algae, Alexandrium minutum, using a super-paramagnetic immunochromatographic strip test

The dinoflagellates of Alexandrium genus are known to be producers of paralytic shellfish toxins that regularly impact the shellfish aquaculture industry and fisheries. Accurate detection of Alexandrium including A. minutum is crucial for environmental monitoring and sanitary issues. In this study, we firstly developed a quantitative lateral flow immunoassay (LFIA) using super-paramagnetic nanobeads for A. minutum whole cells. This dipstick assay relies on two distinct monoclonal antibodies used in a sandwich format and directed against surface antigens of this organism. No sample preparation is required. Either frozen or live cells can be detected and quantified. The specificity and sensitivity are assessed by using phytoplankton culture and field samples spiked with a known amount of cultured A. minutum cells. This LFIA is shown to be highly specific for A. minutum and able to detect reproducibly 105 cells/L within 30 min. The test is applied to environmental samples already characterized by light microscopy counting. No significant difference is observed between the cell densities obtained by these two methods. This handy super-paramagnetic lateral flow immnunoassay biosensor can greatly assist water quality monitoring programs as well as ecological research.

'Malicious Code Execution Detection and Response Immune System inspired by the Danger Theory'

The analysis of system calls is one method employed by anomaly detection systems to recognise malicious code execution. Similarities can be drawn between this process and the behaviour of certain cells belonging to the human immune system, and can be applied to construct an artificial immune system. A recently developed hypothesis in immunology, the Danger Theory, states that our immune system responds to the presence of intruders through sensing molecules belonging to those invaders, plus signals generated by the host indicating danger and damage. We propose the incorporation of this concept into a responsive intrusion detection system, where behavioural information of the system and running processes is combined with information regarding individual system calls.

Tumor-related splicing variant RAC1b in colorectal cancer: regulation and role in tumorigenesis

Purpose: Alternative splicing of the small GTPase RAC1 generates RAC1b, a hyperactivated variant that is overexpressed in a subtype of colorectal tumors. The objective of our studies is to understand the molecular regulation of this alternative splicing event and how it contributes to tumorigenesis. Experimental description: The regulation of the RAC1b splicing event in human colon cell lines was dissected using a transfected RAC1 minigene and the role of upstream regulating protein kinases through an RNA interference approach. The functional properties of the RAC1b protein were characterized by experimental modulation of Rac1b levels in colon cell lines. Results: The RAC1b protein results from an in-frame inclusion of an additional alternative exon encoding 19 amino acids that change the regulation and signaling properties of the protein. RAC1b is a hyperactive variant that exists predominantly in the GTP-bound active conformation in vivo and promotes cell cycle progression and cell survival through activation of the transcription factor NF-κB. RAC1b overexpression functionally cooperates with the oncogenic mutation in BRAF-V600E to sustain colorectal tumor cell survival. The splicing factor SRSF1 was identified to bind an exonic splice enhancer element in the alternative exon and acts as a prime regulator of Rac1b alternative splicing in colorectal cells. SRSF1 is controlled by upstream protein kinase SRPK1, the inhibition or depletion of which led to reduced SRSF1 phosphorylation and nuclear translocation with a concomitant reduction in RAC1b levels. As further SRSF1-regulating pathways we discovered kinase GSK3 and a cyclooxygenase independent effect of the non-steroidal anti-inflammatory drug ibuprofen. Conclusions: Expression of tumor-related RAC1b in colorectal cancer depends critically on SRSF1 for the observed deregulation of alternative splicing during tumorigenesis and is controlled by upstream protein kinases that can be pharmacologically targeted.