An in-situ modified sol-gel process for monolith catalyst preparation used in the partial oxidation of methane

An in-situ modified sol-gel method for the preparation of a Ni-based monolith-supported catalyst is reported. With the presence of a proper amount of plasticizer and binder, and at an optimized pH value, the stable boehmite sol was modified with metal ions (Ni, Li, La) successfully without distinct growth of the particle size. Monolith-supported Ni-based/gamma-Al2O3 catalysts were obtained using the modified sol as the coating medium with several cycles of dip-coating and calcination. Combined BET, SEM-EDS, XRD and H-2-TPR investigations demonstrated that the derived monolith catalysts had a high specific surface area, a relatively homogeneous surface composition, and a high extent of interaction between the active component and the support. These catalysts showed relatively stable catalytic activities for partial oxidation of methane (POM) to syngas under atmospheric pressure. The monolith catalysts prepared by this sol-gel method also demonstrated an improved resistance to sintering and loss of the active component during the reaction process.

Preparation of titania-based catalysts for formaldehyde photocatalytic oxidation from TiCl4 by the sol-gel method

Titania sols were prepared by acid hydrolysis of a TiCl4 precursor instead of titanium alkoxides. The effect of acid concentration on the particle size and stability of sol was investigated. Stable titania sols with mean particle size of 14 nm could be obtained when the H+/Ti molar ratio was 0.5. The titania sols were modified with Pt, SiO2, ZrO2, WO3 and MoO3 to prepare a series of modified catalysts, which were used for the photocatalytic oxidation of formaldehyde at 37 degreesC. They showed different photocatalytic activities due to the influence of the additives. Comparing with pure TiO2, the addition of silica or zirconia increased the photocatalytic activity, while the addition of Pt and MoO3 decreased the activity, and the addition Of WO3 had little effect on the activity. It is of great significance that the conversion of formaldehyde was increased up to 94% over the SiO2-TiO2 catalyst. The increased activity was partly due to higher surface area and porosity or smaller crystallite size. A comparison of our catalyst compositions with the literature in this field suggested that the difference in activity due to the addition of a second metal oxide maybe caused by the surface chemistry of the catalysts, particularly the acidity. (C) 2001 Elsevier Science B.V. All rights reserved.

Aplicação da técnica eletroforese em gel de gradiente desnaturante (DGGE) na caracterização de microrganismos dominantes na rizosfera de plantas cultivadas em solo ácido.

2005

Análise da diversidade micorrízica na rizosfera de genótipos de milho (Zea mays L.) contrastantes para eficiência no uso de P utilizando eletroforese em gel de gradiente desnaturante (DGGE).

A diversidade genética de fungos micorrízicos arbusculares (FMA) presentes na rizosfera de genótipos de milho tropicais, selecionados como contrastantes para eficiência no uso de fósforo (P), foi avaliada pela técnica de eletroforese em gel de gradiente desnaturante (DGGE). Fragmentos de DNA ribossômico (rDNA) foram amplificados por PCR, utilizando primers específicos para as famílias Acaulosporaceae e Glomaceae de fungos micorrízicos. Na análise por DGGE, os primers para as famílias Acaulosporaceae e Glomaceae foram eficientes na diferenciação das populações micorrízicas. Os genótipos de milho tiveram uma maior influência na comunidade de FMA da rizosfera do que o nível de P no solo. Os perfis de DGGE revelaram bandas que estavam presentes somente nos genótipos eficientes no uso de P (L3 e HT3060), sugerindo que alguns grupos de FMA foram estimulados por estes genótipos. As espécies Acaulospora longula, A. rugosa, A. scrobiculata, A. morrowiae e Glomus caledonium foram encontradas somente na rizosfera dos genótipos de milho eficientes no uso de P cultivados em solos com baixo teor de fósforo. Uma maior diversidade micorrízica foi encontrada nas amostras coletadas em solos de plantio direto, comparados com solos de plantio convencional. A efetiva colonização das raízes por FMA pode aumentar a eficiência de uso de P de cultivares em solos sob baixo P, influenciando a produção de milho em solos ácidos do Cerrado.