Mortality rates of the Poovalan prawn (Metapenaeus dobsoni) along the southwest coast of India with a note on the dynamics of its population

The annual instantaneous total mortality coefficient (Z) for the prawn Metapenaeus dobsoni has been estimated to range from 0.8 to 5.14 by the cumulative catch curve method. Different methods used in the study resulted in wide ranging values of natural mortality (M) (0.6 to 2.303), but the yield per recruit model when superimposed with the absolute yield values revealed the right order to be > 2. The biologically optimum yield of about 18 thousand tons is obtained for an effort of 2,702 trawlers per day for 215 fishing days when the annual exploitation ratio (E) is about 52%.

Estimation of maximum sustainable yield (MSY) of hilsa (Tenualosa ilisha Ham.) in the Meghna river of Bangladesh

MSY per recruit of Tenualosa ilisha in the Meghna river was predicted as 112 g per recruit at the F(msy)=0.6/yr and at T(c)=0.6/yr. But Y/R=95 g per recruit was obtained at the existing fishing level, F=1.14/yr and at T(c)=0.6/yr. Existing F level was nearly double than the F(msy) level. Fishing pressure should be reduced immediately from F=1.14/yr to F(msy)=0.6/yr. F(msy)=1.14/yr was the same at first capture, T(c)=1.0, 1.2 and 1.4/yr, and MSY could be obtained as 142 g, 162 g and 176 g per recruit respectively. It is easier to change the first capture age (Tc) rather than changing off level. So, hilsa fishery manager may adopt F(msy)=1.14/yr while age at first capture must be increased from T(c)=0.6/yr (3 cm size group) to T(c)=1.4/yr (25 cm size group), by which 1.8 times production could be increased than the present production. MSY also possible to obtain as 201 g and 210 g per recruit at F(msy)=2.0/yr and 4.0/yr at T(c)=1.7/yr and 1.9/yr respectively. Under both the situations, hilsa production could be increased 2 times than the present production. To obtain the MSY=210 g per recruit the fishing level could be increased up to F=4.0/yr at T(c)=1.9/yr (34 cm size group). Economic point of view, hilsa fishery managers may choose to obtain the economic MSY as 201 g per recruit at F(msy)=2.0/yr and T(c)=1.7yr (31 cm size group) in the Meghna river of Bangladesh.

A note on application of hills procedure for growth-curve analysis of Indian major carp, Labeo rohita (Ham.), during the gonodal development period at Shillong, Meghalaya

The present study deals with the length increment data of 15 adult Labeo rohita (Ham.) over a period of five months by the applicatin of finite difference method at an altitude of 1496 m above mean sea level at Shilllong, Meghalaya.

The modelling of soil plasticity

The modeling of the soil plasticity was discussed and it was shown that the grain breakage is an important factor of the plastic soil behaviour. A reduction of internal coefficient of friction was observed when stress-level was increased. The yield paths of all stress path tests determined by curve fitting were presented.

Stock assessment of the deep-water spiny lobster Palinurus delagoae, off Mozambique

Preliminary estimates of growth parameters and mortality are presented for the deep-water spiny lobster Palinurus delagoae fished off Mozambique. The length-converted catch curve shows three levels of total mortality (year-1): Z=2.9 for the smaller sizes; Z=1.4 for intermediate, and Z=0.6 for the larger lobsters. These results are confirmed by a length-structured virtual population analysis. Yield-per-recruit analysis suggests that a long-term yield, at least 50% higher than the present one, could be obtained by increasing the mean size at first capture from about 6 cm (carapace length) to about 10 cm.

Growth, mortality and yield-per-recruit of Copadichromis likomae (Cichlidae) in Lake Niassa, Mozambique

Analysis of the length-frequency data on Copadichromis likomae (Cichlidae) from Lake Niassa, Mozambique, suggests an asymptotic length of SL∞=14 cm associated with a K value of 0.93 yearˉ¹. Total and natural mortalities were estimated as 3.2 yearˉ¹ and 1.9 yearˉ¹, respectively. Yield-per-recruit analysis suggests that E=0.36 in this fishery.

Axial stiffness of journal bearings in zero-field and field-cooled modes

Superconducting journal bearings have been investigated for use in flywheel systems. We report on the zero-field cooled and field-cooled stiffness of these bearings. They are made up of radial magnet rings with alternating polarities, a pole pitch of 11 mm and a surface field of 0.1 T. Field-cooled stiffness of the journal bearings increased four times over the zero-field-cooled stiffness. © 2005 IEEE.

Growth and yield of GIFT (Oreochromis niloticus) and Thai silver barb (Barbodes gonionotus Bleeker) in rice fields and their effects on the yield of rice

(GIFT) (Oreochromis niloticus) and Silver barb (Barbodes gonionotus) in rice fields and their effects on the yield of rice was carried out in nine experimental rice plots. Three treatments viz., treatment-1 with 0. niloticus (T1), treatment-2 with B. gonionotus (T2) and treatment- 3 was kept as control (T3, without fish) were used in this study. Fertilizers such as, Urea (178 kg ha-1), T.S.P (125 kg ha-1) and M.P. (67 kg ha-1) were applied in each treatment. The fishes were stocked @ 6250 ha·1 and the experiment was continued for a period of 107 days. The values of water quality parameters such as, water temperature, dissolved oxygen, pH and chlorophyll-a were found within suitable level. Between the two species, higher specific growth rate was recorded in 0. niloticus than that of B. gonionotus. But B. gonionotus showed much higher survival (72%) than that of 0. niloticus (35%). Similar to survival, higher production (244 kg ha-1) and income (Tk. 6399 ha-1) were recorded in B. gonionotus than those of 0. niloticus (142.8 kg ha'1 and Tk. 2137 ha-1). Significant differences (pyield of rice grain and straw were observed between the treatments with fish and without fish.

Growth performance, recovery rate and fish yield of GIFT strain at various water depths under rice-fish culture systems

Effect of water depth on recovery rate, growth performance and fish yield of GIFT in the rice-fish production systems was studies in experimental plots of 123 m2 with a pond refuge of I meter deep which covered 10% of the total land area. Mortality rate of fish was very low ranging from 0.81-1.63%. However, at harvest, recovery rate ranged from 76.69-82.93% with the highest recovery at 11-15 em of water depth. Significantly the highest absolute growth (99.97) and specific growth rate (2.42%) were found at 21-25 cm water depth. The same treatment also produced significantly higher fish yield (909.76 kg/ha) although statistically similar to the fish yield (862.60 kg/ha) obtained at ll-15 em of water depth. Results also suggested that higher water depth can produce bigger fish but no significant effects of water depth was found on fish yield in the treatments 11-15 cm and 21-25 cm water depths of this experiment.

Assessing the potential of yield improvements, through process scrap reduction, for energy and CO2 abatement in the steel and aluminium sectors

Targets to cut 2050 CO2 emissions in the steel and aluminium sectors by 50%, whilst demand is expected to double, cannot be met by energy efficiency measures alone, so options that reduce total demand for liquid metal production must also be considered. Such reductions could occur through reduced demand for final goods (for instance by life extension), reduced demand for material use in each product (for instance by lightweight design) or reduced demand for material to make existing products. The last option, improving the yield of manufacturing processes from liquid metal to final product, is attractive in being invisible to the final customer, but has had little attention to date. Accordingly this paper aims to provide an estimate of the potential to make existing products with less liquid metal production. Yield ratios have been measured for five case study products, through a series of detailed factory visits, along each supply chain. The results of these studies, presented on graphs of cumulative energy against yield, demonstrate how the embodied energy in final products may be up to 15 times greater than the energy required to make liquid metal, due to yield losses. A top-down evaluation of the global flows of steel and aluminium showed that 26% of liquid steel and 41% of liquid aluminium produced does not make it into final products, but is diverted as process scrap and recycled. Reducing scrap substitutes production by recycling and could reduce total energy use by 17% and 6% and total CO 2 emissions by 16% and 7% for the steel and aluminium industries respectively, using forming and fabrication energy values from the case studies. The abatement potential of process scrap elimination is similar in magnitude to worldwide implementation of best available standards of energy efficiency and demonstrates how decreasing the recycled content may sometimes result in emission reductions. Evidence from the case studies suggests that whilst most companies are aware of their own yield ratios, few, if any, are fully aware of cumulative losses along their whole supply chain. Addressing yield losses requires this awareness to motivate collaborative approaches to improvement. © 2011 Elsevier B.V. All rights reserved.

A study on the average yield of different species pf prawns used for freezing and canning

The paper deals with the average yield of four spp of prawns viz. Metapenaeus dobsoni, Metapenaeus affinis, Parapenaeopsis stylifera and Penaeus indicus on conversion to peeled and deveined (PD), cooked and peeled (CP) and head less shell on (HL) forms in the different months of a year and the likely variations observed in the average yield.

Morphometric measurements as an index for estimating yield of meat in shell fishes, 2. Mussel (Perna viridis) and clam (villorita cyprinoides)

Observations (76 nos) on height-length and whole weight-meat weight relations of mussels (Perna viridis), both wild and cultured were made. From the length of mussel the height can be worked out by the equations (logarithmic scale), 1. y = 0.360+0.988 x for wild; 2. y = 0.334+1.011 x for cultured, where x is the length (cm) and y is the height (cms). So also to any height the corresponding meat weight can be obtained by the regression equation. log w=-0.8178+1.9769 log H for wild variety (1) log w=-1.3049+2.8385 log H for culture-variety (2) where w is the meat weight (g) and H is the height (cm) of the mussel. Fourteen observations on size weight measurements of dams were made. The yield varied from 8.9 to 13%. The length-height relationship worked out for clams (Villorita sp) is y=0.485+1.005 x for length x and height y.