999 resultados para Viabilidade Financeira
Resumo:
The Nursing Process (NP) is considered as the dynamics of the systemized and inter-related actions of human care. We believe that the nursing manager, as the representative of all the nursing care provided in the hospital setting, is an important agent for the implementation of institutional policies, such as the NP, in the service. However, there is little information in the literature about the NP in the perspective of the nurse manager. The objective of this study was to analyze the viability of the Nursing Process in the hospital context based on the attitudes of the nurse managers toward the Process. We conducted a descriptive-exploratory research study, of quantitative approach, with a population of 45 nurse managers that worked in the state hospitals located in Natal, RN and in the university hospitals of the UFRN. Two instruments were used for the collection of data: a nursing process questionnaire, constructed for use in this study, and the scale for the measurement of the attitudes titled Positions on the Nursing Process. The population is predominantly feminine (91,0%) and have relative nursing practice experience (Mean=17,6 years). However, they have little experience in management (Mean=8,6 years). They express little knowledge of the PE nursing terms and little experience with the Process. They have a positive atitude toward the NP (Mean = 110,9); are favorable to its developement in the service (86,7%); 48,9% indicated little possibility of institutionalization in the service and 37,8% indicated large possibility. The Spearman test for association between the variables of attitude about the NP and the possibility of its institutionalization demonstrated a weak negative association in the total individual scores of the attitudes (-,316) as in the 20 itens of the instrument, with coefficients varying from 0,014 to 0,464. Factorial analysis of the instrument identified three underlying factors to the attitudes of the managers in this study: relevance, operationalization and collaboration, with Cronbach Alpha coeficients of 0,955, 0,844 and 0,807, respectively, and 0,956 for the whole instrument, indicating that the scale and its factorial subscales have internal consistency. We conclude that there is a weak tendency for the managers with a favorable attitude to have a negative perception about the possibility of institutionalization of the NP in the service. The favorable position does not appear to be sufficient for the viability of this methodology in the hospital sector, results that is worrisome for nursing. This situation suggests that the difficulties with the institution of the NP in the hospitals may be related to other factors, including the organizational conditions. We believe that the institucionalization of the NP in a servisse where it is not known and not practiced, constitutes the introduction of an innovative work technology that involves many demands, among them the adherence of the persons to the proposed innovation. This demands time and the institutional adjustments and the human resources necessary. In this process, the involvement of the health professional of the institution is necessary. This situation brings to light the discussions of professional autonomy, the action limits and perspectives, the redefinition of roles, delimiation (or consensus) of the objects of study and of the work processes, among others.
Resumo:
The protected culture, among other advantages, made possible to diminish the seasoning in offers and to improve the quality of vegetables. However, one consists in technology of high cost, that it may be attenuated with the increase in the efficiency of the use of the protected area, proportionated for the intercropping. The experiment was carried out at greenhouse at UNESP, Jaboticabal-SP, in the period of August and November of 2005, with the aim of evaluating the operational cost (COT) and the profitability of the crisphead lettuce "Veronica" (Lactuca sativa L.) in monoculture and in intercropping with the Japanese cucumber "Hokushin" (Cucumis sativus L.), in protected environment. The main cost items analyzed were the operational cost, the agricultural amendments and the materials cost. For the crisphead lettuce in monoculture and in intercropping, the COT was R$ 696,37 and R$ 295,06/614,4 m(2) respectively and the productivity was 822.53 and 890.78 kg/614,4 m(2). In monoculture and in intercropping the gross incomes were R$ 489,93 and R$ 452,39/614,4 m(2) respectively. It was verified a loss of R$ 206,44/614,4 m(2) in the crisphead lettuce monoculture and an operational profit of R$ 157,33/614,4 m(2) in protected environment when in intercropping with cucumber.
Viabilidade produtiva e econômica do consórcio entre chicória e rúcula em função da época de plantio
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Com o objetivo de avaliar a eficiência da seleção precoce em Eucalyptus spp. foram usados dados de dois testes clonais avaliados quanto ao crescimento em altura (ALT), diâmetro à altura do peito (DAP) e volume individual de madeira (VOL) aos 25, 50 e 72 meses de idade. O delineamento experimental nos dois testes clonais foi o de blocos casualizados, com trinta tratamentos (clones), seis repetições, sendo um deles com seis e o outro com dez plantas em linha por parcela, no espaçamento de 3,0 m x 3,0 m. Foi feita a análise de variância para cada caracter e idade. Foram obtidas as estimativas de coeficiente de determinação genotípico e de correlações genotípicas entre os caracteres nas idades juvenis e na idade de rotação. Para verificar a viabilidade da aplicação da seleção precoce, foi simulada a seleção de 30% dos clones nas idades juvenis e na idade de rotação para cada um dos caracteres e idades avaliadas, obtendo-se as estimativas de ganhos genéticos com a seleção direta e indireta. Houve diferenças significativas entre os clones avaliados nos dois experimentos para todos os caracteres e idades. Com base nos resultados obtidos, é possível efetuar a seleção precoce aos 2 anos de idade sobre o caracter DAP em testes clonais de eucalipto.
Resumo:
With the objective of studying the relationship between limestone doses and guava production, a field experiment was conducted on Oxisol soil in the town of Bebedouro-SP, from 1999 to 2006. The experimental design was randomized blocks with four replications. The limestone was used only once in 1999, at doses from zero, 1.85; 3.71; 5.56 and 7.41 t ha(-1). The guava production increased in response to the application of the acidity corrective. The accumulated production of fruits in successive years 2003, 2004, 2005 and 2006 were associated with economical doses of limestone of 1.6; 4.4; 7.2 and 7.2 t ha(-1) respectively.
Resumo:
The feedlot performance of 30 post-weaning 3/4 Canchim 1/4 Nellore calves, with seven months of age and 208,8 kg of liveweight, was evaluated. Three different protein sources in isocaloric and isonitrogenous diets with 60:40 forage: concentrate ratio were used. The diets, fed ad libitum, constituted of corn silage, corn grain, mineral mix and a different protein source for each treatment: cottonseed meal, soybean meal and whole soybean. The weight gain, feed: gain ratio, dry matter and crude protein intake were evaluated for the growing (84 days) and fattening phases (84 days) and for the overall period. An economic study of young bulls production model was realized at the end of experimental period. Soybean meal based diet presented the best animal performance and provided R$ 51.30/head of net profit - the best economic result.
Resumo:
The use of sewage sludge as a raw material falls within the waste recycling key in the current process model environmental sustainability .Waste recycling has been consolidated as a sustainable environmentally sound technical solution, and. Despite showing very variable composition and characteristics, sewage sludge, can be considered as a residue with a high recycling potential in the building sector. In this paper the feasibility of using sewage sludge ash was studied in addition to Portland cement mortar in 1:3 mass considered the standard dash. This gray additions were studied in proportions of 5%, 10 %, 15 %, 20 %, 25% and 30% by mass of cement. The methodology was focused on the characterization of materials by physical, chemical , mechanical , environmental and morphological followed by the production of mortar tests ,and finalized by the characterization tests of mortar in the fresh state, through the consistency index, content of entrained air, bulk density and water retention, and in the hardened state by bulk density, water absorption by capillarity capillarity coefficient, compressive strength, tensile strength in bending ,tensile bond strength and microstructural analysis for percentages of 0 to 20%. After comparing with the standard mortar mortars with addition of ash, it is concluded that the ash of sewage sludge did not impair the integrity and properties of mortars with addition, including increasing resistance to compression and tension, being 20% more indicated percentage. Thus, it becomes feasible the addition of sewage sludge ash in Portland cement mortar for the trait studied
Resumo:
O objetivo deste estudo foi avaliar a viabilidade econômica da implantação de dois biodigestores com uso de dejetos animais em área do Assentamento de Trabalhadores Rurais no município de Itaberá - SP, no ano de 2005; um deles para o fornecimento de energia para os domicílios e outro para as atividades produtivas. Foram avaliados os benefícios referentes ao fornecimento de energia elétrica e térmica, a partir do biogás, para cinco domicílios da agrovila do assentamento e para as atividades produtivas, comparativamente aos custos de construção e operação para produção de biogás. Os resultados mostraram a viabilidade econômica da produção de gás em ambos os biodigestores. Foram gerados benefícios no valor de R$ 3.698,00 por ano e R$ 9.080,57 por ano, nos biodigestores para os domicílios e produção, respectivamente; bem como o equivalente a R$ 1.478,28 por ano referentes à produção de biofertilizante. O custo anual do processo é de R$ 1.218,50 em cada biodigestor. O prazo de recuperação do investimento é de 2,5 anos e 11 meses, para a produção de biogás nos domicílios e na produção, respectivamente. Os resultados podem ser utilizados para subsidiar políticas públicas direcionadas ao aproveitamento de biomassa para a produção de energia a baixos custos no segmento da agricultura familiar.
Resumo:
O manejo adequado da adubação, visando à otimização da produtividade e qualidade dos frutos, é uma etapa representativa do processo produtivo para rentabilidade do empreendedor rural. Neste contexto, objetivou-se analisar a viabilidade econômica de cinco tipos de manejo nutricional de bananeiras de cultivares do subgrupo Cavendish, na região do Médio Paranapanema (SP), em 2009/2010. Foram utilizadas estruturas do custo operacional efetivo (COE) e custo operacional total (COT) e três indicadores de rentabilidade. Diferenças significativas foram observadas entre os manejos, sendo que o sistema de manejo que resultou em maior vantagem econômica para o produtor proporcionou índice médio de lucratividade 25,6% superior aos demais tratamentos, além de a receita líquida total ser, em média, 29,5% superior aos outros tipos de manejo. O custo por unidade produzida foi inferior no manejo nutricional mais lucrativo, apesar de a produtividade ter sido 9,5% inferior ao manejo que apresentou os maiores índices de produtividade.
Resumo:
A produção de biogás por meio de biodigestão anaeróbia representa um avanço para equacionar o problema dos dejetos produzidos pela suinocultura e disponibilidade de energia no meio rural. Este trabalho teve como objetivo estimar a viabilidade econômica de um sistema biointegrado para geração de eletricidade a partir do aproveitamento de dejetos de suínos. Os dados para este estudo foram coletados em uma agroindústria, onde são realizadas diversas atividades agrícolas; entretanto, a suinocultura foi selecionada para o processo de análise de biodigestão anaeróbia, pelo fato de gerar uma grande quantidade de dejetos, com dificuldade de disposição no meio ambiente, configurando um estudo de caso. O biodigestor analisado é um modelo tubular contínuo, com calha de água em alvenaria e com uma manta plástica como gasômetro, onde são depositados diariamente os dejetos de 2.300 suínos em fase de terminação. O investimento inicial para implantação foi estimado em R$ 51.537,17, e os custos anuais do sistema foram de R$ 5.708,20 com manutenção, R$ 4.390,40 com depreciação e R$ 1.366,77 com juros. Concluiu-se que o sistema de produção de biogás é viável do ponto de vista econômico, se o consumo de energia elétrica for de 35 kWh por dia, em média, onde o valor presente líquido (VLP) é de R$ 9.494,90, e a taxa interna de retorno (TIR) é de 9,34% ao ano.
Resumo:
O objetivo deste trabalho foi avaliar, por meio de simulação econômica, a viabilidade de aquisição de um silo-secador, para pequenas propriedades rurais, tendo como referências as opções de terceirizar o processo de secagem/armazenagem ou a comercialização do milho úmido. em virtude da alta diversificação encontrada nas pequenas propriedades rurais, a simulação foi realizada considerando-se diferentes tamanhos de áreas exploradas com milho (10; 20; 30 e 40 ha), níveis de produtividade (3.900; 4.500 e 5.100 kg ha-1) e preços por saca de milho (R$ 13,03; R$ 19,69 e R$ 34,29), no Estado de São Paulo. Comparando as rentabilidades obtidas, notou-se a superioridade da receita líquida na aquisição do silo secador nas áreas de produção de 20 ha com produtividade de 4.500 e 5.100 kg ha-1, 30 ha e 40 ha nos vários níveis de produtividade (3.900; 4.500 e 5.100 kg ha-1) sempre que o preço de mercado da saca de milho cobriu os custos anuais do sistema. A terceirização da secagem/armazenagem apresentou-se como a melhor alternativa nas áreas de 10 ha (todas as produtividades) e 20 ha (produtividade de 3.900 kg ha-1). A comercialização do produto úmido nunca se constituiu na opção mais rentável.
Resumo:
A aplicação mecanizada de herbicidas em ferrovias tem como principal vantagem a grande capacidade operacional, cobrindo trechos extensos em curtos espaços de tempo. Entretanto em função das características dos equipamentos utilizados, quase sempre ocorre grande desperdício de herbicida. A aplicação manual, através de pulverizadores costais, tem como principal vantagem a possibilidade da pulverização dirigida às áreas infestadas, diminuindo a quantidade de herbicida aplicado. Por outro lado, sua reduzida capacidade operacional faz com que a aplicação de longos trechos seja demorada, tornando-a, assim, mais dependente dos problemas climáticos e operacionais da ferrovia. O objetivo do trabalho foi realizar uma análise comparativa das características operacionais e econômicas destes sistemas de aplicação, apontando os fatores mais importantes a serem avaliados para a sua implantação. Para tanto, foram realizadas simulações em computador, baseando-se em diversas equações matemáticas e dados levantados no campo. Os resultados mostraram que a aplicação manual apresentou-se mais econômica apenas para trechos com baixas infestações (até 10%, e média). Na composição de custos, os gastos com herbicidas corresponderam a cerca de 80% do total para a aplicação mecanizada e apenas 8% na manual. Levando-se em conta os fatores operacionais e de mão-de-obra, em apenas um dos trechos avaliados houve vantagem econômica do uso da aplicação manual.
Resumo:
Electrical Motors transform electrical energy into mechanic energy in a relatively easy way. In some specific applications, there is a need for electrical motors to function with noncontaminated fluids, in high speed systems, under inhospitable conditions, or yet, in local of difficult access and considerable depth. In these cases, the motors with mechanical bearings are not adequate as their wear give rise to maintenance. A possible solution for these problems stems from two different alternatives: motors with magnetic bearings, that increase the length of the machine (not convenient), and the bearingless motors that aggregate compactness. Induction motors have been used more and more in research, as they confer more robustness to bearingless motors compared to other types of machines building with others motors. The research that has already been carried out with bearingless induction motors utilized prototypes that had their structures of stator/rotor modified, that differ most of the times from the conventional induction motors. The goal of this work is to study the viability of the use of conventional induction Motors for the beringless motors applications, pointing out the types of Motors of this category that can be more useful. The study uses the Finite Elements Method (FEM). As a means of validation, a conventional induction motor with squirrel-cage rotor was successfully used for the beringless motor application of the divided winding type, confirming the proposed thesis. The controlling system was implemented in a Digital Signal Processor (DSP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico