Influence of crown-to-implant ratio, retention system, restorative material, and occlusal loading on stress concentrations in single short implants

Purpose: The aim of this study was to assess the contributions of some prosthetic parameters such as crown-to-implant (C/I) ratio, retention system, restorative material, and occlusal loading on stress concentrations within a single posterior crown supported by a short implant. Materials and Methods: Computer-aided design software was used to create 32 finite element models of an atrophic posterior partially edentulous mandible with a single external-hexagon implant (5 mm wide × 7 mm long) in the first molar region. Finite element analysis software with a convergence analysis of 5% to mesh refinement was used to evaluate the effects of C/I ratio (1:1; 1.5:1; 2:1, or 2.5:1), prosthetic retention system (cemented or screwed), and restorative material (metal-ceramic or all ceramic). The crowns were loaded with simulated normal or traumatic occlusal forces. The maximum principal stress (σmax) for cortical and cancellous bone and von Mises stress (σvM) for the implant and abutment screw were computed and analyzed. The percent contribution of each variable to the stress concentration was calculated from the sum of squares analysis. Results: Traumatic occlusion and a high C/I ratio increased stress concentrations. The C/I ratio was responsible for 11.45% of the total stress in the cortical bone, whereas occlusal loading contributed 70.92% to the total stress in the implant. The retention system contributed 0.91% of the total stress in the cortical bone. The restorative material was responsible for only 0.09% of the total stress in the cancellous bone. Conclusion: Occlusal loading was the most important stress concentration factor in the finite element model of a single posterior crown supported by a short implant.

Chemico-technological parameters and maturation curves of sweet sorghum genotypes for bioethanol production

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Computação gráfica: ferramenta didática de comunicação, design e produção

This paper aims to show some advantages brought by the computer graphics and inter-disciplinary communication within the academic institution UNESPBauru, using it as a teaching tool in undergraduate engineering and design. The communication in the classroom could be reconfigured through the adoption of new technologies by drawing a parallel between old and new programmatic contents, setting goals and parameters to improve communication between teacher and student, transferring and sediment of the given content and increasing production in quantity and complexity of work undertaken by students. As an example of computer graphics use, this work presents a final graduation work that was successful in the market, "Teardrop Trailer Caracol", as result of the final adoption of CAD technology as a teaching tool, design and production.

Forças manuais e o design de produtos: uma revisão

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O design e o produto: parâmetros projetuais para o planejamento de jogos geométricos pré-escolares

Educational games are responsible for part of the information assimilated by the child, because these games respect the individual learning time, enabling experimentation and, consequently, being an accessory to retain the acquired knowledge spontaneously. However, the analogy between stimulus and reception/result is not always the expected. On the one hand, there are the pedagogues, bearing the knowledge necessary to the children’s development. On the other hand, are the children, who cannot completely assimilate the concept, commonly because of lack of planning on the product. After all, the children become not interested in the game, without developing the expected cognitive abilities planned for the product. Whereas the importance of the games on children’s development, this work aimed to analyze and select educational games presented on the preschool, based on the language exploration from the Design’s knowledge and skills. Specifically, the research intends to investigate games targeted to stimulate geometric concepts, and so, to describe parameters that must be observed during the product planning.

Parâmetros antropométricos para o design de produtos destinados à acessibilidade de obesos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Design universal e acessibilidade: análise ergonomica de equipamentos de ginástica em espaços públicos

In recent years the availability of equipment for exercise in public places increased demand on the principles of universal design, ergonomics and accessibility, since they are intended for use by many different users. This paper presents an analysis of ergonomic equipment and discusses the main problems observed, as well as projective presents parameters for the development of new products.

Design de objetos de aprendizagem digital do ponto de vista da usabilidade

Technological resources and the media are contributing to socioeconomic development, including the education sector. Application of Digital Learning Objects support learning, serving as a tool for distance learning arrangements and classroom. The quality of design in instructional materials is one factor that implies the motivation of students and support their learning, within this context, the creation of educational interactive multimedia applications should excel the content and good usability, while facilitating user interaction. The aim of this paper was to establish parameters for the creation and management of Digital Learning Objects.

Diagnostic accuracy of the EMG parameters associated with anterior knee pain in the diagnosis of patellofemoral pain syndrome

Objective To assess the diagnostic accuracy of the surface electromyography (sEMG) parameters associated with referred anterior knee pain in diagnosing patellofemoral pain syndrome (PFPS). Design Sensitivity and specificity analysis. Setting Physical rehabilitation center and laboratory of biomechanics and motor control. Participants Pain-free subjects (n=29) and participants with PFPS (n=22) selected by convenience. Interventions Not applicable. Main Outcome Measure The diagnostic accuracy was calculated for sEMG parameters’ reliability, precision, and ability to differentiate participants with and without PFPS. The selected sEMG parameter associated with anterior knee pain was considered as an index test and was compared with the reference standard for the diagnosis of PFPS. Intraclass correlation coefficient, SEM, independent t tests, sensitivity, specificity, negative and positive likelihood ratios, and negative and positive predictive values were used for the statistical analysis. Results The medium-frequency band (B2) parameter was reliable (intraclass correlation coefficient=.80–.90), precise (SEM=2.71–3.87 normalized unit), and able to differentiate participants with and without PFPS (P<.05). The association of B2 with anterior knee pain showed positive diagnostic accuracy values (specificity, .87; sensitivity, .70; negative likelihood ratio, .33; positive likelihood ratio, 5.63; negative predictive value, .72; and positive predictive value, .86). Conclusions The results provide evidence to support the use of EMG signals (B2 – frequency band of 45–96Hz) of the vastus lateralis and vastus medialis muscles with referred anterior knee pain in the diagnosis of PFPS.

A percepção visual visando a continuação gráfica na repetição modular do design de superfície

This article narrates from experiences in the classroom, the use of visual perception in the search for the solution of a basic problem of modular repetition, embodied by the lack of continuity in the elements that shape the design surface. Although Wong (1998) approach emphasizes the intuitive and intellectual approach as different parameters for building visual compositions, we list both as participants in the same focus, where the solution starts from the sensory stimulation.

Milho, amido ou caroço de algodão associados à glicerina bruta em dietas para ovinos

Pós-graduação em Zootecnia - FCAV

Metalosupramoléculas discretas e Metal Organic Frameworks (MOFs) baseados em íons lantanídeos: design, síntese, caracterização e propriedades

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Evaluation of clinical, ultrasonographic and hysteroscopic parameters in the differentiation of endometrial polyps and cancer of endometrium

Study Objective: To evaluate the diagnostic accuracy of transvaginal ultrasound and office hysteroscopy in the differentiation between endometrial polyps and endometrial adenocarcinoma. Design: This is a prospective 100 women longitudinal study, 24 to 80 years, submitted to hysteroscopic polypectomy (n = 80) or surgery due to endometrial adenocarcinoma (n = 20), from january 2010 to December 2011. Clinical, ultrasonographic and hysteroscopic parameters were analyzed and compared with histopathologic find. Statistical analysis were performed utilizing the Tukey, Kruskal-Wallis, Dunn and Mann-Whitney test, with a confidence interval of 95% and p\0, 05 statiscally significant. Setting: Botucatu Medical School. Intervention: Prospective analysis of clinical, ultrasonographic and hysteroscopic parameters in patients with diagnosis suspected of endometrial polyps and adenocarcinoma of endometrium were performed. According to the diagnosis, hysteroscopic polypectomy or pan hysterectomy with lymph node sampling was realized. After the surgery and histopathological study, statistical analysis of parameters was performed and the results were compared between groups. It was Research Ethics Committee approved. Measurements and Main Results: There were no differences between age, BMI, menopause, TH use and associated diseases among groups. The main symptom of endometrial cancer was the postmenopausal bleeding, affecting 84,2% of women against 34,8% of polypectomy group. The majority of women with endometrial polyps were asymptomatic. Transvaginal ultrasonography showed no ability to differentiate cases of endometrial cancer compared with the cases of endometrial polyps, considering the presence of endometrial thickness and blood flow on color Doppler. Office hysteroscopy showed significant changes in 75% of the adenocarcinoma cases, especially the presence of diffuse hypervascularity with atypical vessels. Conclusion: Still remains an inability to establish clinical parameters and reliable ultrasound imaging to differentiate endometrial polyps and cancer of endometrium. Attention should be given to hysteroscopic exams presenting diffuse endometrial hypervascularization with architectural distortion of the vessels. The recommendation of our service remains the systematic removal of all endometrial polyps.

Design gráfico ergonômico: método para verificação de níveis de usabilidade de fontes tipográficas para texto em suportes impressos e digitais

Pós-graduação em Design - FAAC

Parâmetros nutricionais e metabólicos de novilhos nelore recriados em pastos de diferentes alturas e doses de suplemento

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)