Growth and physiological responses of sunflower plants exposed to ultraviolet-B radiation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fissuras lábio-palatais: estudo caso-controle

Realizou-se um estudo caso-controle com o propósito de se detectar possíveis fatores de risco para o aparecimento de fissuras orais. Foram objeto de análise: local de moradia da mãe nos quatro primeiros meses de gestação, poluição, aplicação de pesticida/herbicida na lavoura, doenças dos pais, doenças da mãe nos quatro primeiros meses de gestação, ingestão medicamentosa nesse período, hereditariedade, tabagismo, consumo de bebida alcoólica e exposição a raio-X. Foram aplicados formulários às mães referentes aos 450 casos, sendo 354 portadores de fissuras labiais ou lábio-palatais e 96 de fissuras palatinas, e às mães referentes aos 450 controles. Empregou-se análise multivariada e as variáveis hereditariedade (RR=4,96), epilepsia na mãe (RR=2,39) e ingestão de anti-inflamatório (RR=2,59) foram consideradas fatores de risco para fissuras labiais ou lábio-palatais. As variáveis hereditariedade (RR=2,82) e poluição (RR=2,58) foram consideradas fatores de risco para fissuras palatinas.

Gráficos de controle X para processos robustos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Exposição ao ruído ocupacional como fator de risco para acidentes do trabalho

OBJETIVO: Verificar se a exposição ocupacional ao ruído é fator de risco relevante para acidentes do trabalho. MÉTODOS: Estudo de caso-controle de base populacional. Os dados foram coletados entre 16/5/2002 e 15/10/2002, na cidade de Botucatu, Estado de São Paulo. Os casos foram definidos como trabalhadores que sofreram acidentes ocupacionais típicos nos últimos 90 dias, identificados por intermédio de amostragem aleatória sistemática de domicílios residenciais. Os controles foram trabalhadores não acidentados, aleatoriamente alocados a partir da mesma população que originou os casos, emparelhados na razão 3:1 segundo sexo, faixa etária e setor censitário de moradia. Ajustou-se um modelo de regressão logística múltipla, tendo como variável independente a exposição ocupacional ao ruído, controlada por covariáveis de interesse. RESULTADOS: Foram analisados 94 casos e 282 controles. Ajustando-se um modelo de regressão logística condicional múltipla observou-se que trabalhar sempre e às vezes exposto a ruído intenso associou-se a um risco relativo de acidentar-se de 5,0 (IC 95%: 2,8-8,7; p<0,001) e 3,7 (IC 95%: 1,8-7,4; p=0,0003), respectivamente, tendo como referência trabalhar não exposto a ruído, controlado para diversas covariáveis. CONCLUSÕES: Com base nos resultados encontrados, justifica-se o investimento em programas de conservação auditiva particularmente voltados para o controle da emissão de ruídos na fonte. Essas medidas objetivam não apenas a manutenção da saúde auditiva, mas também a diminuição da acidentabilidade dos trabalhadores.

Case-case-control study of risk factors for nasopharyngeal colonization with methicillin-resistant Staphylococcus aureus in a medical-surgical intensive care unit

Nasopharyngeal colonization with methicillin-resistant Staphylococcus aureus (MRSA) often precedes the development of nosocomial infections. In order to identify risk factors for MRSA colonization, we conducted a case-case-control study, enrolling 122 patients admitted to a medical-surgical intensive care unit (ICU). All patients had been screened for nasopharyngeal colonization with S. aureus upon admission and weekly thereafter. Two case-control studies were performed, using as cases patients who acquired colonization with MRSA and methicillin-susceptible S. aureus (MSSA), respectively. For both studies, patients in whom colonization was not detected during ICU stay were selected as control subjects. Several potential risk factors were assessed in univariate and multivariable (logistic regression) analysis. MRSA and MSSA were recovered from nasopharyngeal samples from 27 and 10 patients, respectively. Independent risk factors for MRSA colonization were: length-of-stay in the ICU (Odds Ratio [OR]=1.12, 95%Confidence Interval[CI]=1.06-1.19, p<0.001) and use of ciprofloxacin (OR=5.05, 95%CI=1.38-21.90, p=0.015). The use of levofloxacin had a protective effect (OR=0.08, 95%CI=0.01-0.55, p=0.01). Colonization with MSSA was positively associated with central nervous system disease (OR=7.45, 95%CI=1.33-41.74, p=0.02) and negatively associated with age (OR=0.94, 95%CI=0.90-0.99, p=0.01). In conclusion, our study suggests a role for both cross-transmission and selective pressure of antimicrobials in the spread of MRSA.

Multivariate quality control studies applied to Ca(II) and Mg(II) determination by a portable method

A portable or field test method for simultaneous spectrophotometric determination of calcium and magnesium in water using multivariate partial least squares (PLS) calibration methods is proposed. The method is based on the reaction between the analytes and methylthymol blue at pH 11. The spectral information was used as the X-block, and the Ca(II) and Mg(II) concentrations obtained by a reference technique (ICP-AES) were used as the Y-block. Two series of analyses were performed, with a month's difference between them. The first series was used as the calibration set and the second one as the validation set. Multivariate statistical process control (MSPC) techniques, based on statistics from principal component models, were used to study the features and evolution with time of the spectral signals. Signal standardization was used to correct the deviations between series. Method validation was performed by comparing the predictions of the PLS model with the reference Ca(II) and Mg(II) concentrations determined by ICP-AES using the joint interval test for the slope and intercept of the regression line with errors in both axes. (C) 1998 John Wiley & Sons, Ltd.

Efficacy of pre- and postinoculation application of Fungicides to expanding young citrus leaves for control of melanose, scab, and alternarial brown spot

In greenhouse trials, copper hydroxide, pyraclostrobin, and famoxadone were applied to actively crowing young citrus seedlings to determine the duration of protection of young leaves provided by these fungicides against melanose, caused by Diaporthe citri, citrus scab, caused by Elsinoe fawcettii, and Alternaria brown spot, caused by Alternaria alternata. Fungicides were applied to different sets of potted plants of grapefruit for control of melanose, of rough lemon for control of scab, and of Dancy tangerine for control of Afternaria brown spot 1 to 6 days prior to inoculation. as well as on the day of inoculation. Leaf area of treated shoots was estimated on the day of fungicide application and the day of inoculation and disease severity evaluated subsequently. In most cases. copper hydroxide and famoxadone provided at least 50% control of all three diseases for only about 2 days after application. Generally, there was little or no disease control when the products were applied 4 or more days before inoculation. In contrast, pyraclostrobin usually provided a high level of control of all three diseases when applied up to 5 days prior to inoculation. The level of disease control decreased as the interval between a fungicide application and inoculation increased and the relationship between disease control and leaf expansion best fit a quadratic equation. Effective disease control was observed with copper hydroxide and famoxadone until leaf area had increased by 100 to 200%, whereas control with pyraclostrobin was observed up to 400 to 500% increase in leaf area. In postinoculation tests with scab and melanose, pyraclostrobin provided high levels of disease control (>75%) when applied up to 2 days after inoculation. whereas copper hydroxide and famoxadone had minimal postinoculation activity. Applications of pyraclostrobin to the spring flush growth of citrus trees are much more likely to provide control of melanose, scab, and Alternaria brown spot than those of famoxadone or copper hydroxide.

A multi-cell variable frequency interleaved ZCS boost rectifier digitally controlled by FPGA

This paper presents a multi-cell single-phase high power factor boost rectifier in interleave connection, operating in critical conduction mode, employing a soft-switching technique, and controlled by Field Programmable Gate Array (FPGA). The soft-switching technique is based on zero-current-switching (ZCS) cells, providing ZC (zero-current) turn-on and ZCZV (zero-current-zero-voltage) turn-off for the active switches, and ZV (zero-vohage) turn-on and ZC (zero-current) turn-off for the boost diodes. The disadvantages related to reverse recovery effects of boost diodes operated in continuous conduction mode (additional losses, and electromagnetic interference (EMI) problems) are minimized, due to the operation in critical conduction mode. In addition, due to the interleaving technique, the rectifier's features include the reduction in the input current ripple, the reduction in the output voltage ripple, the use of low stress devices, low volume for the EMI input filter, high input power factor (PF), and low total harmonic distortion (THD) in the input current, in compliance with the IEC61000-3-2 standards. The digital controller has been developed using a hardware description language (VHDL) and implemented using a XC2S200E-SpartanII-E/Xilinx FPGA device, performing a true critical conduction operation mode for all interleaved cells, and a closed-loop to provide the output voltage regulation, like as a preregulator rectifier. Experimental results are presented for a implemented prototype with two and with four interleaved cells, 400V nominal output voltage and 220V(rms) nominal input voltage, in order to verify the feasibility and performance of the proposed digital control through the use of a FPGA device.

Methodology for load compensation in four-wire electrical power systems based on instantaneous sampling

This work describes a methodology for power factor control and correction of the unbalanced currents in four-wire electric circuits. The methodology is based on the insertion of two compensation networks, one wye-grounded neutral and other in delta, in parallel to the load. The mathematical development has been proposed in previous work [3]. In this paper, however, the determination of the compensation susceptances is based on the instantaneous values of load currents. The results are obtained using the MatLab-Simulink enviroment

Variable structure controller and observer applied to induction machine

This work will propose the control of an induction machine in field coordinates with imposed stator current based on theory of variable structure control and sliding mode. We describe the model of an induction machine in field coordinates with imposed stator current and we show the design of variable structure control and sliding mode to get a desirable dynamic performance of that plant. To estimate the inaccessible states we will use a state observer (estimator) based on field coordinates induction machine. We will present the results of simulations in any operation condition (start, speed reversal and load) and with parameters variation of the machine compared to a PI control scheme.

Exact boundary control for the wave equation in a polyhedral time-dependent domain

We establish exact boundary controllability for the wave equation in a polyhedral domain where a part of the boundary moves slowly with constant speed in a small interval of time. The control on the moving part of the boundary is given by the conormal derivative associated with the wave operator while in the fixed part the control is of Neuman type. For initial state H-1 x L-2 we obtain controls in L-2. (C) 1999 Elsevier B.V. Ltd. All rights reserved.

Effects of direction and curvature on variable error pattern of reaching movements

A number of studies have analyzed various indices of the final position variability in order to provide insight into different levels of neuromotor processing during reaching movements. Yet the possible effects of movement kinematics on variability have often been neglected. The present study was designed to test the effects of movement direction and curvature on the pattern of movement variable errors. Subjects performed series of reaching movements over the same distance and into the same target. However, due either to changes in starting position or to applied obstacles, the movements were performed in different directions or along the trajectories of different curvatures. The pattern of movement variable errors was assessed by means of the principal component analysis applied on the 2-D scatter of movement final positions. The orientation of these ellipses demonstrated changes associated with changes in both movement direction and curvature. However, neither movement direction nor movement curvature affected movement variable errors assessed by area of the ellipses. Therefore it was concluded that the end-point variability depends partly, but not exclusively, on movement kinematics.

A model for optimal chemical control of leaf area damaged by fungi population - Parameter dependence

We present a model to study a fungi population submitted to chemical control, incorporating the fungicide application directly into the model. From that, we obtain an optimal control strategy that minimizes both the fungicide application (cost) and leaf area damaged by fungi population during the interval between the moment when the disease is detected (t = 0) and the time of harvest (t = t(f)). Initially, the parameters of the model are considered constant. Later, we consider the apparent infection rate depending on the time (and the temperature) and do some simulations to illustrate and to compare with the constant case.

Variable dose rate application of herbicides using optical sensors

The aim of this study was to develop and evaluate a variable dose rate application of herbicides using an online electronic control based system with optical sensors for weed detection in forested areas. The proposed concept was to apply a basic dose on 100% of the area (aiming to control small weeds) and to apply a complementary patch-spraying dose only on areas with higher weed infestation. For that purpose, a conventional spray boom was adjusted to apply 40% of the herbicide dose on the full area and the optical sensors were used to control the application of the complementary dose (60%) only on areas with higher infestation. The results showed that the system performed adequately. Field applications presented herbicide savings around 20 to 30%, with a similar weed control performance as compared to the full dose application on 100% of the area.

Influence of sire breed (Bos indicus versus Bos taurus) and interval from slaughter to oocyte aspiration on heat stress tolerance of in vitro-produced bovine embryos

Based on in vitro experiments, Bos indicus embryos were more resistant to heat stress (HS) than Bos taurus embryos. To increase knowledge regarding differences between Bos indicus and Bos taurus in resistance to HS, the primary objective of this study was to determine if tolerance to HS is due to the breed, origin of the oocyte, sperm, or both. Additionally, the influence of the interval between ovary acquisition (in the abattoir) and oocyte aspiration in the laboratory, on early embryo development was ascertained. Oocytes were collected from Nelore and Holstein cows in an abattoir; 4.0 or 6.5 h later, oocytes were aspired in the laboratory, and then matured and fertilized using semen from Nelore (N), Gir (GIR), or Holstein (H) bulls. Ninety-six h post insemination (hpi), embryos with >= 16 cells were divided in two groups: control and HS. In the control group, embryos were cultured at 39 degrees C, whereas in the HS group, embryos were subjected to 41 degrees C for 12 h, and then returned to 39 degrees C. Rates of cleavage, and formation of morula and blastocysts were higher (P < 0.05) for oocytes aspirated at 4.0 versus 6.5 h after ovaries were acquired. Heat stress decreased rates of blastocyst formation for all breeds (N X N; H x H; and H X GIR) and in both time intervals (4.0 and 6.5 h). However, N X N had higher cleavage rate (P < 0.05) in both time intervals when compared with H X H and H X GIR. In addition, Nelore oocytes fertilized with Nelore semen (N X N) had higher blastocyst yields (P < 0.05) in the control and HS group, when compared with the other two breeds (H X H and H X GIR). We concluded that the breed of origin of the oocyte was more important than that of the sperm for development of thermotolerance, because bull breed did not influence embryo development after HS, and in vitro early embryonic development was impaired by increasing (from 4 to 6.5 h) the interval between ovary acquisition and oocyte aspiration. (C) 2011 Elsevier B.V. All rights reserved.