Colocalization of synapsin and actin during synaptic vesicle recycling

It has been hypothesized that in the mature nerve terminal, interactions between synapsin and actin regulate the clustering of synaptic vesicles and the availability of vesicles for release during synaptic activity. Here, we have used immunogold electron microscopy to examine the subcellular localization of actin and synapsin in the giant synapse in lamprey at different states of synaptic activity. In agreement with earlier observations, in synapses at rest, synapsin immunoreactivity was preferentially localized to a portion of the vesicle cluster distal to the active zone. During synaptic activity, however, synapsin was detected in the pool of vesicles proximal to the active zone. In addition, actin and synapsin were found colocalized in a dynamic filamentous cytomatrix at the sites of synaptic vesicle recycling, endocytic zones. Synapsin immunolabeling was not associated with clathrin-coated intermediates but was found on vesicles that appeared to be recycling back to the cluster. Disruption of synapsin function by microinjection of antisynapsin antibodies resulted in a prominent reduction of the cytomatrix at endocytic zones of active synapses. Our data suggest that in addition to its known function in clustering of vesicles in the reserve pool, synapsin migrates from the synaptic vesicle cluster and participates in the organization of the actin-rich cytomatrix in the endocytic zone during synaptic activity.

Industrial scale microwave processing of tomato juice using a novel continuous microwave system

This study evaluated the effect of an industrial scale continuous flow microwave volumetric heating system in comparison to conventional commercial scale pasteurisation for the processing of tomato juice in terms of physicochemical properties, microbial characteristics and antioxidant capacity. The effect against oxidative stress in Caco-2 cells, after in vitro digestion was also investigated. Physicochemical and colour characteristics of juices were very similar between technologies and during storage. Both conventional and microwave pasteurisation inactivated microorganisms and kept them in low levels throughout storage. ABTS⁺ values, but not ORAC, were higher for the microwave pasteurised juice at day 0 however no significant differences between juices were observed during storage. Juice processed with the microwave system showed an increased cytoprotective effect against H₂O₂ induced oxidation in Caco-2 cells. Organoleptic analysis revealed that the two tomato juices were very similar. The continuous microwave volumetric heating system appears to be a viable alternative to conventional pasteurisation.

Laser-driven x-ray and neutron source development for industrial applications of plasma accelerators

Pulsed beams of energetic x-rays and neutrons from intense laser interactions with solid foils are promising for applications where bright, small emission area sources, capable of multi-modal delivery are ideal. Possible end users of laser-driven multi-modal sources are those requiring advanced non-destructive inspection techniques in industry sectors of high value commerce such as aerospace, nuclear and advanced manufacturing. We report on experimental work that demonstrates multi-modal operation of high power laser-solid interactions for neutron and x-ray beam generation. Measurements and Monte Carlo radiation transport simulations show that neutron yield is increased by a factor ∼2 when a 1 mm copper foil is placed behind a 2 mm lithium foil, compared to using a 2 cm block of lithium only. We explore x-ray generation with a 10 picosecond drive pulse in order to tailor the spectral content for radiography with medium density alloy metals. The impact of using >1 ps pulse duration on laser-accelerated electron beam generation and transport is discussed alongside the optimisation of subsequent bremsstrahlung emission in thin, high atomic number target foils. X-ray spectra are deconvolved from spectrometer measurements and simulation data generated using the GEANT4 Monte Carlo code. We also demonstrate the unique capability of laser-driven x-rays in being able to deliver single pulse high spatial resolution projection imaging of thick metallic objects. Active detector radiographic imaging of industrially relevant sample objects with a 10 ps drive pulse is presented for the first time, demonstrating that features of 200 μm size are resolved when projected at high magnification.

A Microgrid Testbed for Interdisciplinary Research on Cyber-Secure Industrial Control in Power Systems

This paper describes a smart grid test bed comprising embedded generation, phasor measurement units (PMUs), and supporting ICT components and infrastructure. The test bed enables the development of a use case focused on a synchronous islanding scenario, where the embedded generation becomes islanded from the mains supply. Due to the provisioned control components, control strategy, and best-practice ICT support infrastructure, the islanded portion of the grid is able to continue to operate in a secure and dependable manner.

Surviving the industrial city: the female poor and the workhouse in late nineteenth-century Belfast

In common with many British cities, but unlike the rest of Ireland, late nineteenth-century Belfast experienced rapid industrialization and physical expansion. Women formed a significant proportion of the city’s workforce, attracted by the employment opportunities represented in the burgeoning textile industry. Many of them were economically vulnerable, however, and could find themselves destitute for a number of reasons. This article sets Belfast’s Poor Law workhouse in the landscape of welfare in the city, exploring how its use reflected the development of the city and the ways in which the female poor engaged with it in order to survive.

Theorizing temporary spatial clusters and institutional boundary-work in industrial markets

To better understand the nature of temporary spatial clusters (TSC’s) in industrial marketing settings, this conceptual paper first provides a theoretical synthesis of spatial understanding from the industrial marketing (IM) and economic geography (EG) fields, focusing particularly on Doreen Massey’s work on relational space. This leads to a conceptual schema for organizing the IM literature in terms of spatiality, and which also helps clarify the ontological nature of TSCs. We then move to introduce the notion of institutional boundary-work, drawing on the work of Thomas Gieryn, and Andrea Brighenti’s examination of territorology, to conceptualize the activities of market actors engaged in the ongoing social accomplishment of TSCs. Such activities, we suggest, involve these actors ‘marching’ boundaries to assume network influence and maintain market order in IM settings. In summary, therefore, our paper addresses two fundamental questions: i) How do we conceptualize the form of TSCs in IM settings? And, ii) what function(s) are TSCs performing (and how is this being undertaken) in IM? The paper closes by providing methodological guidance for how a research agenda on TSCs within IM activity might be developed, followed by a summary of the managerial implications that emerge from our theorizations.

Reconversão e Musealização de Espaços Industriais: Actas do Colóquio de Museologia Industrial

Conjunto de comunicações alusivas a projectos de reconversão e muealização de espaços industriais na região Norte de Portugal. São, também, apresentadas comunicações que refletem sobre os conceitos e experiências neste domínio, nomeadamente, em Inglaterra e Catalunha.

Phenolic compounds from forest industrial by-products

Em Portugal, as indústrias corticeira e de pasta de papel constituem um importante sector económico, contudo, gerando elevadas quantidades de subprodutos. Estes subprodutos poderiam ser explorados em aplicações de alto valor acrescentado, como fonte de compostos fenólicos, por exemplo, em vez de serem apenas queimados para produção de energia. Estes compostos são conhecidos pelas suas inúmeras propriedades, entre as quais, antioxidante, anti-inflamatória e anti-trombótica. Neste estudo as frações fenólicas da maior parte dos subprodutos gerados nas indústrias corticeira e de pasta de papel foram caracterizados em detalhe, com vista à sua valorização. A fração fenólica das cascas de Eucalyptus globulus, E. grandis, E. urograndis e E. maidenii, bem como da cortiça de Quercus suber e resíduos provenientes da sua exploração, nomeadamente, o pó de cortiça e os condensados negros, foi obtida por processos convencionais de extração sólido-líquido. No caso da casca de E. globulus, foi ainda avaliado o potencial de metodologias “verdes” no processo de extração de compostos fenólicos, usando extração com CO2 supercrítico. Esta técnica foi otimizada com recurso a metodologias de superfície de resposta. Na identificação e quantificação dos compostos fenólicos foi usada cromatografia líquida de alta resolução aliada a técnicas de espectrometria de massa. O teor de fenólicos totais foi ainda determinado pelo método de Folin- Ciocalteu, essencialmente para efeitos comparativos. A caracterização da fração fenólica de cada extrato foi ainda complementada com a análise da atividade antioxidante, usando o radical 2,2-difenil-1-picrilhidrazilo (DPPH). Foram identificados trinta compostos fenólicos na casca de E. globulus, 17 deles referenciados pela primeira vez como seus constituintes, nomeadamente os ácidos quínico, di-hidroxifenilacétic, cafeico e metil-elágico, bis-hexahidroxidifenoil( HHDP)-glucose, galoil- bis-HHDP-glucose, galoil-HHDPglucose, isoramnetina—hexosídeo, quercetina-hexosídeo, ácido metil-elágicopentosídeo, miricetina-ramnosídeo, isoramnetina-ramnosídeo, mearnsetina, floridzina, mearnsetina-hexosídeo, luteolina e uma proantocianidina B. Neste trabalho, foi estudada pela primeira vez a composição fenólica das cascas de E. grandis, E. urograndis e E. maidenii. Treze, doze e vinte e quatro compostos fenólicos foram identificados nas cascas de E. grandis, E. urograndis e E. maidenii, respetivamente. Entre estes compostos encontram-se os ácidos quínico, gálico, metilgálico, protocatequínico, clorogénico e elágico, catequina, galoil-bis-HHDP-glucose, digaloilglucose, epicatequina, quercetina-glucoronídeo, di-hidroxiisopropilcromona- hexosídeo, isoramnetina-hexosídeo, ácido elágicoramnosídeo, taxifolina, quercetina-hexosídeo, di-hidroxi- (metilpropil)isopropilcromona-hexosídeo, ácido metil-elágico-pentosídeo, miricetina-ramnosídeo, isoramnetina-ramnosídeo, aromadendrina-ramnosídeo, mearnsetina, mearnsetina-hexosídeo, eriodictiol, quercetina, isoramnetina e naringenina. A análise da fração fenólica da cortiça permitiu identificar vinte e dois compostos fenólicos, dez deles referenciados pela primeira vez como seus constituintes, nomeadamente, os ácidos quínico, salicílico, p-hidroxifenillático e metilgálico, ácido carboxílico da brevifolina, eriodictiol, naringenina, um éster isoprenílico do ácido cafeico, isoramnetina-ramnosídeo e isoramnetina. No pó de cortiça industrial foram identificados dezasseis compostos fenólicos, nomeadamente os ácidos quínico, gálico, protocatequínico, cafeico, ferúlico, elágico e metilgálico, esculetina, ácido carboxílico da brevifolina, coniferaldeído, um éster isoprenílico do ácido cafeico, uma dilactona do ácido valoneico, ácido elágico-pentosídeo, ácido elágico-ramnosídeo, isoramnetinaramnosídeo e isoramnetina. Destes, apenas o ácido elágico foi previamente referenciado como componente do pó de cortiça. Do mesmo modo, treze compostos fenólicos foram identificados no condensado negro, doze deles referenciados pela primeira vez como seus constituintes. São eles os ácidos quínico, gálico, p-hidroxifenil-láctico, protocatequínico, p-coumarico, cafeico e elágico, vanilina, esculetina, coniferaldeído, um éster isoprenílico do ácido cafeico e o eriodictiol. A extração supercrítica de compostos fenólicos da casca de eucalipto permitiu não só verificar os parâmetros que afetam a qualidade e quantidade finais dos extratos, como também obter os valores ótimos para estes parâmetros. Esta extração mostrou ainda ser bastante seletiva para determinados grupos de compostos fenólicos, como as flavanonas eriodictiol e naringenina e para o flavonol O-metilado isoramnetina. Este é também o primeiro estudo envolvendo a determinação da atividade antioxidante de extratos da cortiça e dos resíduos da sua exploração, bem como da casca de E. grandis, E. urograndis e E. maidenii. A vasta gama de compostos fenólicos identificados em cada extrato analisado, assim como as prominentes atividades antioxidantes, todas na mesma gama de valores do bem conhecido antioxidante comercial, ácido ascórbico, são claramente um grande contributo para a valorização destes subprodutos industriais.

A gestão da qualidade na Associação Industrial do Distrito de Aveiro

A Associação Industrial do Distrito de Aveiro é uma Associação sem fins lucrativos presente nesta região desde 1986. Com o objetivo de prestar apoio ao tecido empresarial da região, tem evoluindo ao longo dos tempos, estruturando e diversificando a sua tipologia de serviços, adaptando-os às suas reais necessidades. A Qualidade é um conceito que tem vindo a evoluir ao longo dos anos, tomando cada vez mais importância para os consumidores adquirirem produtos de qualidade. Atualmente o sucesso de uma empresa depende em muito da qualidade dos produtos ou serviços que este providencia ao mercado. Assim, a existência de um Sistema de Gestão de Qualidade torna-se também importante para controlar essa qualidade. Este trabalho analisa a Gestão da Qualidade dos serviços prestados pela AIDA, em particular no que se refere ao Gabinete de Relações Exteriores, e às iniciativas por este desenvolvidas.

Assessing the effectiveness of chemical treatment with nanomaterials in improving the quality of different industrial effluents

Industrial activities are the major sources of pollution in all environments. Depending on the type of industry, various levels of organic and inorganic pollutants are being continuously discharged into the environment. Although, several kinds of physical, chemical, biological or the combination of methods have been proposed and applied to minimize the impact of industrial effluents, few have proved to be totally effective in terms of removal rates of several contaminants, toxicity reduction or amelioration of physical and chemical properties. Hence, it is imperative to develop new and innovative methodologies for industrial wastewater treatment. In this context nanotechnology arises announcing the offer of new possibilities for the treatment of wastewaters mainly based on the enhanced physical and chemical proprieties of nanomaterials (NMs), which can remarkably increase their adsorption and oxidation potential. Although applications of NMs may bring benefits, their widespread use will also contribute for their introduction into the environment and concerns have been raised about the intentional use of these materials. Further, the same properties that make NMs so appealing can also be responsible for producing ecotoxicological effects. In a first stage, with the objective of selecting NMs for the treatment of organic and inorganic effluents we first assessed the potential toxicity of nanoparticles of nickel oxide (NiO) with two different sizes (100 and 10-20 nm), titanium dioxide (TiO2, < 25 nm) and iron oxide (Fe2O3, ≈ 85x425 nm). The ecotoxicological assessment was performed with a battery of assays using aquatic organisms from different trophic levels. Since TiO2 and Fe2O3 were the NMs that presented lower risks to the aquatic systems, they were selected for the second stage of this work. Thus, the two NMs pre-selected were tested for the treatment of olive mill wastewater (OMW). They were used as catalyst in photodegradation systems (TiO2/UV, Fe2O3/UV, TiO2/H2O2/UV and Fe2O3/H2O2/UV). The treatments with TiO2 or Fe2O3 combined with H2O2 were the most efficient in ameliorating some chemical properties of the effluent. Regarding the toxicity to V. fischeri the highest reduction was recorded for the H2O2/UV system, without NMs. Afterwards a sequential treatment using photocatalytic oxidation with NMs and degradation with white-rot fungi was applied to OMW. This new approach increased the reduction of chemical oxygen demand, phenolic content and ecotoxicity to V. fischeri. However, no reduction in color and aromatic compounds was achieved after 21 days of biological treatment. The photodegradation systems were also applied to treat the kraft pulp mill and mining effluents. For the organic effluent the combination NMs and H2O2 had the best performances in reduction the chemical parameters as well in terms of toxicity reduction. However, for the mine effluent the best (TiO2/UV and Fe2O3/UV) were only able to significantly remove three metals (Zn, Al and Cd). Nonetheless the treatments were able of reducing the toxicity of the effluent. As a final stage, the toxicity of solid wastes formed during wastewater treatment with NMs was assessed with Chironomus riparius larvae, a representative species of the sediment compartment. Certain solid wastes showed the potential to negatively affect C. riparius survival and growth, depending on the type of effluent treated. This work also brings new insights to the use of NMs for the treatment of industrial wastewaters. Although some potential applications have been announced, many evaluations have to be performed before the upscaling of the chemical treatments with NMs.

Modelling large-scale information systems using ADLs – An industrial experience report

An organisation that had developed a large information system wanted to embark on a programme that would involve large-scale evolution of it. As a precursor to this, it was decided to create a comprehensive architectural description to capture and understand the system’s design. This undertaking faced a number of challenges, including a low general awareness of software modelling and software architecture practices. The approach taken by the software architects tasked with this project included the definition of a simple, very specific, architecture description language. This paper reports our experience of the project and a simple ADL that we created as part of it. 

Digital Debris of Internet Art: An Allegorical and Entropic Resistance to the Epistemology of Search

This Ph.D., by thesis, proposes a speculative lens to read Internet Art via the concept of digital debris. In order to do so, the research explores the idea of digital debris in Internet Art from 1993 to 2011 in a series of nine case studies. Here, digital debris are understood as words typed in search engines and which then disappear; bits of obsolete codes which are lingering on the Internet, abandoned website, broken links or pieces of ephemeral information circulating on the Internet and which are used as a material by practitioners. In this context, the thesis asks what are digital debris? The thesis argues that the digital debris of Internet Art represent an allegorical and entropic resistance to the what Art Historian David Joselit calls the Epistemology of Search. The ambition of the research is to develop a language in-between the agency of the artist and the autonomy of the algorithm, as a way of introducing Internet Art to a pluridisciplinary audience, hence the presence of the comparative studies unfolding throughout the thesis, between Internet Art and pionners in the recycling of waste in art, the use of instructions as a medium and the programming of poetry. While many anthropological and ethnographical studies are concerned with the material object of the computer as debris once it becomes obsolete, very few studies have analysed waste as discarded data. The research shifts the focus from an industrial production of digital debris (such as pieces of hardware) to obsolete pieces of information in art practice. The research demonstrates that illustrations of such considerations can be found, for instance, in Cory Arcangel’s work Data Diaries (2001) where QuickTime files are stolen, disassembled, and then re-used in new displays. The thesis also looks at Jodi’s approach in Jodi.org (1993) and Asdfg (1998), where websites and hyperlinks are detourned, deconstructed, and presented in abstract collages that reveals the architecture of the Internet. The research starts in a typological manner and classifies the pieces of Internet Art according to the structure at play in the work. Indeed if some online works dealing with discarded documents offer a self-contained and closed system, others nurture the idea of openness and unpredictability. The thesis foregrounds the ideas generated through the artworks and interprets how those latter are visually constructed and displayed. Not only does the research questions the status of digital debris once they are incorporated into art practice but it also examine the method according to which they are retrieved, manipulated and displayed to submit that digital debris of Internet Art are the result of both semantic and automated processes, rendering them both an object of discourse and a technical reality. Finally, in order to frame the serendipity and process-based nature of the digital debris, the Ph.D. concludes that digital debris are entropic . In other words that they are items of language to-be, paradoxically locked in a constant state of realisation.

Mid-Century Molecular: The Material Culture of X-ray Crystallographic Visualisation across Postwar British Science and Industrial Design

This thesis investigates the use and significance of X-ray crystallographic visualisations of molecular structures in postwar British material culture across scientific practice and industrial design. It is based on research into artefacts from three areas: X-ray crystallographers’ postwar practices of visualising molecular structures using models and diagrams; the Festival Pattern Group scheme for the 1951 Festival of Britain, in which crystallographic visualisations formed the aesthetic basis of patterns for domestic objects; and postwar furnishings with a ‘ball-and-rod’ form and construction reminiscent of those of molecular models. A key component of the project is methodological. The research brings together subjects, themes and questions traditionally covered separately by two disciplines, the history of design and history of science. This focus necessitated developing an interdisciplinary set of methods, which results in the reassessment of disciplinary borders and productive cross-disciplinary methodological applications. This thesis also identifies new territory for shared methods: it employs network models to examine cross-disciplinary interaction between practitioners in crystallography and design, and a biographical approach to designed objects that over time became mediators of historical narratives about science. Artefact-based, archival and oral interviewing methods illuminate the production, use and circulation of the objects examined in this research. This interdisciplinary approach underpins the generation of new historical narratives in this thesis. It revises existing histories of the cultural transmissions between X-ray crystallography and the production and reception of designed objects in postwar Britain. I argue that these transmissions were more complex than has been acknowledged by historians: they were contingent upon postwar scientific and design practices, material conditions in postwar Britain and the dynamics of historical memory, both scholarly and popular. This thesis comprises four chapters. Chapter one explores X-ray crystallographers’ visualisation practices, conceived here as a form of craft. Chapter two builds on this, demonstrating that the Festival Pattern Group witnesses the encounter between crystallographic practice, design practice and aesthetic ideologies operating within social networks associated with postwar modernisms. Chapters three and four focus on ball-and-rod furnishings in postwar and present-day Britain, respectively. I contend that strong relationships between these designed objects and crystallographic visualisations, for example the appellation ‘atomic design’, have been largely realised through historical narratives active today in the consumption of ‘retro’ and ‘mid-century modern’ artefacts. The attention to contemporary historical narratives necessitates this dual historical focus: the research is rooted in the period from the end of the Second World War until the early 1960s, but extends to the history of now. This thesis responds to the need for practical research on methods for studying cross-disciplinary interactions and their histories. It reveals the effects of submitting historical subjects that are situated on disciplinary boundaries to interdisciplinary interpretation. Old models, such as that of unidirectional ‘influence’, subside and the resulting picture is a refracted one: this study demonstrates that the material form and meaning of crystallographic visualisations, within scientific practice and across their use and echoes in designed objects, are multiple and contingent.

Neural network assisted autotuning of industrial PID controllers

A recent servey (1) has reported that the majority of industrial loops are controlled by PID-type controllers and many of the PID controllers in operation are poorly tuned. poor PID tuning is due to the lack of a simple and practical tuning method for avarage users, and due to the tedious procedurs involved in the tuning and retuning of PID controllers.