Avaliação da atividade citotóxica de espécies vegetais em linhagens celulares humanas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação da atividade antifúngica de extrato de Plinia cauliflora e Endopleura uchi

O uso indiscriminado dos medicamentos sintéticos e a própria evolução dos micro-organismos selecionou espécies extremamente resistentes aos agentes químicos utilizados. Para contornar tal situação e ampliar o arsenal de compostos ativos contra micro-organismos, o estudo de plantas tornou-se uma necessidade crescente. A utilização de fitoterápicos na prevenção e/ou cura de doenças são necessários estudos prévios relativos a aspectos botânicos, farmacognósticos, fitoquímicos, farmacológicos e toxicológicos. Neste trabalho, foram estudados extratos obtidos com as folhas de Plinia cauliflora (Mart.) Kausel e de cascas pulverizadas de Endopleura uchi (Huber) Cuatrec., quanto às propriedades antimicrobianas frente a diferentes linhagens de fungos: Aspergillus niger, Beauveria bassiana, Metarhizium anisopliae, Trichoderma reesei e Trichophyton rubrum. Foram avaliadas as atividades antifúngicas dos materiais vegetais determinando sua Concentração Inibitória Mínima (CIM). Com base nesses dados foi realizada a avaliação da atividade antifúngica observando o crescimento radial dos fungos em placas de Petri contendo meio de cultura incorporado com os materiais vegetais nas concentrações de CIM e 1%, sendo após realizada a mensuração dos diâmetros formados. Trichophyton rubrum foi o micro-organismo que apresentou maior sensibilidade frente ao extrato e as frações de P. cauliflora, com valores de CIM baixos, enquanto que a cepa industrial de Aspergillus niger mostrou-se totalmente resistente a todos os extratos testados. A determinação da atividade antifúngica em placas contendo meio sólido, mostrou uma confirmação dos resultados pois o extrato etanólico, a fração butanólica e a fração aquosa de P. cauliflora, tanto na concentração 1% quanto na obtida pelo CIM, inibiram o crescimento T. rubrum

Propriedades estruturais de géis de sílica preparados com adições de dodecil sulfato de sódio

This work aims to study the structural characteristics of silica gels obtained from the acid hydrolysis of tetraethoxysilane (TEOS) in water solutions with different concentrations of sodium dodecyl sulfate (SDS). The structural characteristics were studied in stages ranging from the wet gel to the dry stages of the gels (aerogels and xerogels). Aerogels were obtained by ambient pressure drying (APD) after silylation process using trimethylchlorosilane (TMCS) as silylating agent. Xerogels were obtained by conventional evaporating the liquid phase from non silylated gels. The samples were characterized by nitrogen adsorption and small angle X-ray scattering (SAXS). The structure of the wet gels and of the aerogels prepared with the surfactant exhibited characteristics of mass-fractal structures with fractal dimension D in the range 2.1-2.2 for the wet gels and 2.3-2.4 for the aerogels. The characteristic size  of the fractal domain reduces while the size a0 of the primary silica particle composing the fractal structure increases with the drying of the gels, in a process in which share of the porosity is eliminated. Aerogels exhibited typical values for the specific surface of 900 m2g-1 and of 3.5 cm3.g-1 for the total pore volume. These values are correspondingly comparable to those of the aerogels prepared by supercritical drying, since the silylation process replaces hydrophilic –OH groups by hydrophobic –Si-R3 ones, inhibiting the porosity elimination on drying. The silica particle size also increases lightly with the silylation because the attachment of the –Si-R3 groups on the silica surface. The pore size distribution curves of the aerogels are similar for all samples exhibiting a maximum in around 40 nm, independent the concentration of surfactant. This suggests that the characteristic size of 40 nm is due to the association of surfactant micelles... (Complete abstract click electronic access below)

Desenvolvimento e caracterização de sistemas líquido cristalinos para incorporação de p-metoxicinamato de octila

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização morfológica e fenotípica de leveduras do gênero Cryptococcus com ênfase na pesquisa de Cryptococcus neoormans isoladas de amostras de água de mar e areia de três ambientes costeiros do estado de São Paulo: Canal de São Sebastião, Baixada Santista e Ubatuba

The yeast Cryptococcus neoformans is the etiologic agent of cryptococcosis, an infectious cosmopolitan disease that affects humans. Although rare, this disease is potentially fatal, especially for immunocompromised hosts. This pathogen is frequently isolated from excrements of pigeons and parrots, with many environmental sources such as birds, pigeon droppings, eucalyptus leaves, decaying trees, towers, churches and places of storage of grain (the port area). The isolation of this microorganism has been obtained also from the aquatic environment. The identification of environmental sources is needed to protect human health, especially susceptible populations such as immunocompromised. Therefore, this study investigated the presence of Cryptococcus neoformans in yeast isolates obtained from samples of sea water and sand from three regions of São Paulo: São Sebastião Channel, Santos and Ubatuba. Isolates were analyzed according to micro-and macroscopic characteristics and biochemical tests: microculture, urease, ink nankin, auxanograma, zymogram and phenol. We analyzed 199 isolates, 175 of which had features suggestive for Cryptococcus spp. in microculture. All these 175 isolates were sown in the Christensen urea middle to verify the production of urease and submitted to the technique nankin ink to visualize the capsule. Of these, only 24 were selected for the next test that was the auxanograma (assimilation of carbohydrate and nitrogen). Of the 24, 10 were tested in zymograms (fermented sugar), from which 5 were selected for the phenoloxidase test in medium containing dopamine. None of the 5 isolates tested had black or brown color characteristic of Cryptococcus neoformans. According to these tests, we arrived at 5 isolates identified to the genus Cryptococcus, but not the neoformans specie

Incorporação do trans-resveratrol em sistemas nanoestruturados: avaliação das ações antioxidante e despigmentante in vitro

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização fitoquímica e ensaios biológicos de Coleus blumei Benth

Coleus blumei Benth (Lamiaceae), popularly known in Brazil as heart-hurt or coleus-of-Java is an ornamental plant widely used due to the color of its leaves. Several species of the genus Coleus present compounds with antioxidant, antimicrobial and allopathic activities due to the presence of chemicals such coleonol, forskolin and rosmarinic acid. Therefore, this study aimed to carry out phytochemical study and biological tests to evaluate the antibacterial, antioxidant and allopathic activities of the 70% ethanol extract and its fractions ethyl acetate, dichloromethane and end aqueous fraction leaf of Coleus blumei Benth. The plant extract was prepared by turbolisis from the powder of dried leaves, as a solvent for extraction using 70% ethanol. The ethanol extract was fractionated with solvents dichloromethane and ethyl acetate. The phytochemical study identified the presence of saponins, free anthraquinones, flavonoids and anthocyanidins. In evaluating the antibacterial dichloromethane fraction showed activity against all microorganisms tested both in agar diffusion test and microdilution test. The 70% ethanol extract showed activity against the micro-organisms S. aureus and S. epidermidis in agar diffusion test and against all microorganisms tested in microdilution test. The ethyl acetate fraction showed activity against the micro-organism S. aureus in the agar diffusion test and against all microorganisms tested in microdilution test. The end aqueous fraction showed no activity against any micro-organism tested. In the test of evaluation activity allopathic dichloromethane fraction showed greater inhibition of seed germination and growth of tomato (Lycopersicon esculentum Mill), followed by 70% ethanolic extract, the ethyl acetate fraction and the end aqueous fraction. In testing the antioxidant activity with DPPH ethyl acetate fraction showed higher antioxidant activity followed... (Complete abstract click electronic access below)

Influência de diferentes extratos de Cordia ecalyculata em cultura de células-tronco mesenquimais humanas

Diante da constatação clínica de que muitos pacientes não conseguem benefício completo da remissão da ulceração em membros inferiores com os tratamentos convencionais, o Setor de Biotecnologia do Hemocentro de Botucatu estabeleceu o protocolo de produção de curativos bioativos, que interagem com a lesão e estimulam via hormônios de crescimento (PDGF, VEFG, FGF e outros) a recuperação da área danificada por indução das células-tronco comissionadas da pele. Estudos realizados na Faculdade de Química de Araraquara culminaram com a purificação do princípio ativo do fitoterápico Cordia ecalyculata para analisar in vitro o seu alto potencial antiinflamatório. Seus diferentes extratos foram enviados ao Laboratório de Engenharia Celular da Faculdade de Medicina de Botucatu: extrato bruto (EB), fase aquosa (FA), fase hexânica (FH) e fase etérea (FE), que foram testados em diferentes concentrações em cultura de células-tronco mesenquimais humanas (CTM), oriundas de tecido adiposo, com a finalidade de analisar, através de caspase-3, marcador intracelular, o índice de apoptose. Aquele que apresentar o melhor resultado será adicionado à fórmula dos biocurativos. Este trabalho tem os objetivos de avaliar a contribuição da cultura celular de CTM nos testes de tolerância com Cordia ecalyculata, estabelecer o índice de apoptose celular e avaliar o tempo de confluência maior que 80% na cultura de CTM em diferentes concentrações de C. ecalyculata. Os resultados encontrados comprovaram que os extratos que apresentaram os melhores desempenhos foram os da FA em todas as concentrações e FE de 25μg/mL. Os extratos FE nas demais concentrações demonstraram um desempenho insatisfatório,o que nos indica que uma concentração entre 25 e 50μg/mL seja o limite entre a boa execução nas células e toxicidade. Mais testes terão que ser realizados para demonstrar qual é essa concentração de FA é realmente melhor a ser utilizada

Utilização de técnicas de planejamento de experimentos na análise de viabilidade de alterações no processo de pintura de grades Antracite em uma indústria automotiva

The search for better performance and competitive advantage in the current market scenario has made organizations keep their focus on quality planning and the use of effective techniques aimed at continuous improvement and optimization of processes and resources. The situation is not different for the painting process in the automotive industry, which has a significant amount of variables and influential external factors. This work, developed at General Motors in São José dos Campos, aims to analyze the feasibility of changing the painting process of the pickup S10 railings in the Antracite color located in the main line to the another line located in a Painting Repair Booth at the plant and, therefore, to study the possibility about reducing the window of cure for Antracite’s enamel by using Design of Experiments’ techniques. Applying this method is possible to find the best arrangement among studied factors of Painting Repair Booth that are, in this case, the Temperature, in Celsius degrees, and Skid’s Steps, in seconds, and it’s also possible to get their behavior according to quality requirements specified by GM rules for the Brightness and Paint Adhesion on the part. As a result, it can conclude that is possible to paint the S10 Antracite railings in the painting process’ line of Painting Repair Booth, and with the new configuration obtained by the Design of Experiments for the process variables, there are significant gains related to the parts’ quality, costs reduction and the optimization of production capacity, much in the main line as in the line of the Painting Repair Booth

Infecção por Cryptosporidium em bezerros e humanos de assentamentos rurais na região de Araçatuba, São Paulo

Pós-graduação em Medicina Veterinária - FCAV

Determination of lead in eye shadow and blush by high-resolution continuum source graphite furnace atomic absorption spectrometry employing directSolid sampling

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A punção subaracnoidea sobre tatuagem determina alterções histológicas sobre o tecido nervoso e as meninges?

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação da mutagenicidade e da estrogenicidade dos extratos etanólicos padronizados, frações e substâncias isoladas de Arrabidaea brachypoda (DC.) Bureau

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização fitoquímica e ensaios biológicos de Syngonium podophyllum

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Técnicas de caracterização microestrutural, por microscopia óptica e microscopia eletrônica de varredura, de aços bifásicos e multifásicos aplicados à indústria automobilística

This project developed microstructural characterization technics of commercial dualphase and multi-phasic (TRIP) steels that were provided by the automotive industry and are currently used as the raw material for the production of automobiles. Inserted in this context, there is the development of the advanced high strength steels in consonance with the ULSABAVC project, which aims the production of safe, economically viable and efficient in terms of fuel consumption vehicles for the 21st century. The micro-structural characterization of biphasic and multiphase steels was done by the identification and quantification of the coexistent phases. In this item, a special attention was given to the technics that were performed using optic microscopy and scanning electron microscopy. An important contribution to this work was the utilization of different alternative chemical reagents (Beraha, Heat-Tinting technics) in addition to the classical ones (Nital and LePera)already used conventionally by the UNESP's Group of Mechanical, Microstructural and Fractografic Characterization of Materials. The revealed microstructures were correlated with the materials' mechanical properties determined through traction tests, such as ultimate tensile strengths, yield strength and stretching important since the material has structural application in the automotive industry. As a result, it was observed the superiority concerning the studied mechanical properties for the biphasic and multiphasic steels when compared to the conventional carbon steels. Besides, it was perceived a large potential for the industrial scale utilization of the Heat Tinting technics in this field, seen its differentiation of the existent phases and easy reproducibility