Zoneamento geoambiental como instrumento de planejamento e gestão de recursos do pólo cerâmico de Santa Gertrudes

The disorded and unnplaned occupation is not recent in out territory but it concerns to a historical territorial invasion that roots the time of our country discovery. However, they have started to cause issues nowadays, as in the case of urban conurbations. Somehow these unorganized urban, industrial and agricultural occupations did not have any sort of information or indication of the appropriate situation at that time. Because of that there has been researches by several groups to induce the users of the several renewable and non renewable resources to explore them according to their natural potential capacity.The Ceramic Pole of Santa Gertrudes, the national largest producer of ceramic tile, faces this problem of disorder occupation. Among other themes, the reorganization of the physical environment, proposed by several groups of researchers and scholars of this subject, is gaining attention now.The method of Geoenvironmental Zoning results in a way of prevention from this issue. Crossing information of the physical environment and generating maps whose areas and subdivisions have similar characteristics, it is possible to manage studies and handle these areas according to their potentiality.

Características Termo-Higrométricas em Bairros com Diferentes Padrões Construtivos em Presidente Prudente - SP

This study aimed to analyze the characteristics of temperature and air humidity from neighborhoods of Presidente Prudente according to the pattern of land use specific to each of them, over a representative period of winter (July 2011), at different times of day in order to identify the major changes in climatic elements and their causes in urban areas. The work is based mainly on the Monteiro’s theory (1976) of Urban Climate System and for its implementation was used data of temperature and relative humidity of the air in three urban neighborhoods and one rural area. With them, a Chart of Rhythmic Analysis was elaborated for identification of the operating atmospherics systems and basic climate conditions in the period. Were prepared, also, graphs and charts to evaluate and compare the data. There were significant differences in the characteristics of temperature and air humidity between the neighborhoods, especially when compared the urban areas with the rural area

Modelagem e simulação numérica de um sistema de refrigeração por absorção utilizando o par H2O-LiBr

The term refrigeration solar refers to any air conditioning system that uses solar energy as a primary energy source. The use of solar radiation for cooling purposes is divided according to their technological possibilities which are distinguished from one another as the way that energy is involved in the cycle, work or heat. The first case is related to vapor compression cycles, in which the work input is provided by the photovoltaic conversion of solar energy into electrical energy. In the second case, an absorption refrigeration cycle is used and the thermal energy collected from the solar radiation is provided at the generator of this cycle.. In this work a system with an absorption cycle using the pair BrLi-water, using solar energy as input is modeled. It is considered a simple refrigeration cycle whose the equations of mass and energy conservation in each component are developed in order to obtain an algebraic equation set and a simulation routine using the EES software. Although the simulation operates under certain specified thermal load it is possible to estimate the necessary areas of heat exchangers and solar collectors

Mecânica quântica e sua relação com terapias alternativas

Este trabalho propôs uma discussão crítica sobre os conceitos e fenômenos da Mecânica Quântica (MQ) empregados na explicação cientifíca que dá suporte quanto ao princípio de funcionamento de algumas terapias alternativas ou sobre a elaboração de seus respectivos medicamentos, em especial, Homeopatia e Cura Quântica. Essa discussão se faz importante para munir o leitor com argumentos sólidos calcados na teoria quântica e confrontá-los coma as ideias de simpatizantes leigos dessas terapias. Portanto, o trabalho visou descrever fatos históricos que tornaram possível a construção teórica da Mecânica Quântica, elaborou um resumo da loso a dominante que norteava o pensamento imediatamente anterior a MQ e o conflito que se seguiu em decorrência das implicações deste novo ramo da Física. Explorou o paradoxo EPR e o consequente teorema de John Bell sobre as desigualdades até chegar no experimento de Alain Aspect envolvendo laser para responder de forma prática e definitiva o paradoxo EPR. Finalmente, o trabalho apresentou um resumo das abordagens e argumentações defendidas pelos proponentes das terapias alternativas e confrontou com os conceitos da Mecânica Quântica, para enfim apresentar ao público um estudo científico sobre Homeopatia e Cura Quântica, e compreender os limites e equívocos empregados a essas terapias

Aplicação do DMAIC em uma indústria farmacêutica

In an industry, being a big one or small one, the process improvement is always a focus for it to increase in the market. The improvement, if searched in a simple meaning, brings the unique meaning of change to better. However the meaning of process improvement can take much more than a superficial point of view. Kaizen, Process improvement, Continuous improvement, they are some denotations much more comprehensive of a such a term carried of so many meanings. A good concept of improvement if to search inside processes a more appropriate way, a more succinct, a more economic way to realize it. The idea is to make the process in a better way. In this graduation thesis, there will be presented a process improvement realized in a Vale do Paraíba company. For that, it was used the DMAIC to obtain, measure and control the process improvement. It should be noted that the goal is to present and discuss a process improvement

Tratamento de modificação de eutético da liga AA356

Alloy Al-7%Si-0,3Mg (AA356), having an excellent combination of properties such as low solidification shrinkage and good fluidity, good weldability, high wear resistance, high strength to weight particularly in the automotive and aerospace engineering. The refinement of the structure aluminum silicon eutectic alloy is a fairly common practice in the casting, through the treatment knows as modification. You can get the modification for the addition of chemicals and rare earths, these have the ability to modify the structure of the eutectic, but only sodium and strontium produce a strong action modifier when used in low concentrations. The modifying effect of silicon grain turns into a fibrous form branched and enveloped by the metal matrix in the form of a composite structure that has the highest limit of tensile strength, ductility and machinability. This work will be obtained AA356 alloy ingots using two different types of molds: metal mold and sand mold. Macrographs will be made in ingots obtained for observation of the macrostructures obtained in both types of ingots. Will be sampled at strategic locations of the ingots to correlate microstructure and cooling rate. The results showed that the material of the ingot has a strong influence on the resulting micro-andmacrostructure

Expressão de Pentraxina 3 em membranas corioamnióticas de gestações prétermo complicadas por rotura prematura de membranas pré-termo ou trabalho de parto prematuro

Pentraxina 3 (PTX3) é um componente essencial da resposta imune inata e age como receptores de reconhecimento de padrões (PPRs) reconhecendo produtos microbianos, opsonizando fungos, bactérias Gram positivas e negativas, além de apresentar a capacidade de ativar o sistema complemento. Poucos estudos na literatura mundial têm investigado a expressão de PTX3 nas complicações gestacionais associadas à invasão microbiana da cavidade amniótica e resultados conflitantes têm sido descritos. Avaliar a expressão gênica e protéica de PTX3 em membranas corioamnióticas de gestações pré-termo complicadas por Trabalho de Parto Prematuro (TPP) e bolsa íntegra ou Rotura Prematura de Membranas Pré-Termo (RPM-PT), na presença de corioamnionite histológica (CA). Foram incluídas no estudo 30 gestantes com TPP, sendo 15 na ausência e 15 na presença de corioamnionite histológica e 30 gestantes com RPM-PT, sendo 15 na ausência e 15 na presença de corioamnionite histológica. Cortes parafinizados foram encaminhados à análise histopatológica para confirmação de corioamnionite histológica. Outros fragmentos de 1cm2 das membranas foram submetidos à extração de RNA total. Após a extração do RNA, as amostras com concentração entre 0,02 e 0,2g/ L de RNA foram submetidas à obtenção de cDNA para posterior utilização na quantificação da expressão gênica de PTX3 pela técnica da PCR em tempo real empregando-se o Sistema TaqMan® Gene Expression Assays. Fragmentos das mesmas amostras incluídas no estudo foram utilizados para verificar a expressão da proteína PTX-3 através da técnica de Western Blotting. Dentre as 60 membranas corioamnióticas incluídas no estudo, 56 (93,3%) expressaram PTX-3. Não houve diferença estatisticamente significativa na expressão de mRNA de PTX-3 (p=0,137) entre os grupos: RPM-PT na presença de CA (Md: 0.355; 0.11-1.03), RPM-PT na...(Resumo completo, clicar acesso eletrônico abaixo)

Caracterização física e mecânica de compensado produzido com dois diferentes adesivos em duas variações de pressão de prensagem

The adhesives used in the production of engineered boards have been object of study over the years in order to improve the properties of the boards with less energy consumption, lower production costs and reduced environmental impact. In addition to that, process variables may affect the properties of the board. The present study aimed to characterize sheets of plywood, manufactured with two types of adhesives, under two different pressing conditions. The adhesives used for the study were Phenol-formaldehyde and Polyurethane castor oil based. The pressure of pressing was varied in a range from 75 to 160 Bar, in order to verify how they influence the physical and mechanical properties of the board. The tests performed resulted in a conclusion that shows that the moister content of the veneers interferes on the physical and mechanical tests. In general, boards produced with polyurethane resin showed superior physical and mechanical results; although the ones produced with phenol formaldehyde at a pressure of 75 Bar had always equal or higher values, compared to what is found in literature

Produção e caracterização físico-mecânica de painel de compensado de Eucalyptus sp. e adesivo PVA

Studies on new adhesives and resins for bonding wood and wood products are being conducted with the intention of improving their properties, taking into account a lower environmental impact. For this reason new formulations of polyvinyl acetate (PVA) adhesives have been developed, because they have no chemicals in its composition extremely polluting and harmful to health, as is the case of formaldehyde-based resins, which in turn are the most commonly used today for wood panels production. This study tested three different formulations of PVA adhesives, with different times and temperatures of pressing for the production of Eucalyptus sp. Plywood, coming up in satisfactory results with respect to shear strength at the bondline, which was higher for the PVA adhesives compared with urea-formaldehyde and phenol. The results of MOE and MOR were lower than those values of the panels produced with urea and phenol-formaldehyde, and the results of physical tests showed to be close to the panels produced with these same adhesives

Sobre as considerações de uma concepção de um projeto de um forno cerâmico

The current competitiveness of the market has generated the need to minimize the cost of production companies in any field of activity, aimed at reducing the cost of production, the cost of purchasing and manufacturing processes interruption of manufacturing processes for possible maintenance. In this sense, companies are seeking methods to improve and streamline their production line. In ceramics industries, cooking the pieces is the portion of the production process that influences the total costs. The oven construction and maintenance represent a large portion embedded in the cost of the final ceramic product. The proposal for a type of oven for baking the parts that takes into account a better burning process, knowledge of the causes of disease and cost analysis of purchasing both of the constituent materials and labor for its construction, can be significant importance to the composition of final product costs or time analysis of ROI. It is proposed a streamlined design of an oven that takes into account the positive characteristics of the furnaces already built and that the experience has endorsed, and also others that are added at the end, lead to a reduction in production cost, the cost income and the number of pathologies arising from wear of the furnace along the lifespan. Therefore, according to the experiences gained over the years in the construction of furnaces and experience of manufacturing of ceramic, it is proposed a project that has an oven improvement over those now being built and that include, among other topics, economy in fuel burning, streamlining the building process

Analise de defeitos em motores através de vibração mecânica: estudo de caso

Revolving machines are among the most used equipment in general industry and therefore expenditures on this equipment class are a significant portion of the total amount spent by the company. If there is an unscheduled stop of some of this equipment, industrial plants can lose huge amounts of money caused by interrupted production and parts delay. Others may increase significantly maintenance costs due to consequences elsewhere not affected before. Even plant and people safety can be in danger if there is an operation interruption without a backup system start. This work is focused on a rotating system case study which is monitored by vibration analysis that shows that is possible to determine when is the most appropriate time for equipment intervention without any reliability loss just by using a simple and cheap system which is not much used because professionals are not aware to its utility. Industrial facilities were evaluated by fail detection and historical analysis in some equipment in order to show feasibility of vibration analysis through a before-during-after process. The plant evaluated is part of a chemical multinational located in Guaratinguetá-SP. At this time, that plant had around 650 critical equipment monthly monitored and no unscheduled shutdown was registered in one year period due to equipment monitoring

Polimorfismo do gene IL6 candidato à predisposição à rotura prematura de membranas pré-termo e ao trabalho de parto pré-termo

Introduction: Preterm Labor (PTL) and Preterm Premature Rupture of Membranes (PPROM) cause severe complications for both mother and fetus. Among the risk factors associated with preterm labor and PPROM, genetic predisposition has been gaining importance. However, the association between polymorphic genes and the pathogenesis of PTL and PPROM remains elusive. A better understanding of the genetic mechanisms underlying these adverse pregnancy outcomes may enable the identification of high risk patients and allow new approaches to minimize the deleterious effects of prematurity. Aim: To determine the association between maternal IL-6 polymorphism gene and the occurrence of PTL and PPROM. Patients and Methods: The study included 109 patients with prior history of PL and/or PPROM that delivered prematurely at the Obstetrical Unit Care of Botucatu Medical School, UNESP between 2003 and 2012. The control group consisted of 68 patients that delivered at term, matched to the case group by age, ethnicity, and sex of the newborn. Oral swabs (Cath-AllTM – Epicentre Biotechnologies) were collected for analysis of genetic polymorphisms by PCR. Statistical tests were performed to compare genotype, clinical and socio-demographic data from the groups. A p-value of <0.05 was considered significant. Results: The sociodemographic characteristics in both groups were homogeneously distributed. The frequency of the polymorphic allele C, associated with less production of IL-6, and therefore thought to be protective against PTL and PPROM, was 32,5% in the study group and 30,9% in the control group, without statistically significant differences. Conclusion: Considering the sample size included in this study, the frequency of the mutated allele is similar in pregnant women who delivered at term and gestational complications as PTL and PPROM

Redução de consumo de energia eletrica a partir de reaproveitamento de energia termica com uso de ciclo rankine orgânico

This paper is proposed the usage of an Organic Rankine Cycle (ORC) along with waste heat recovery from an inconstant heat source. This method of waste heat recovery with intermittent heat source is part of a technical viability study. This paper also brings up the usage of thermal energy storage as heat source for the ORC. This paper is based on a heat treatment company study in which a natural gas furnace is explored. Data such as mass flow, temperature and specific waste gas heat from this furnace are used through calculations. Calculations are made also based on furnace cycles. This viability study considers a series of working fluids such as ammonia, benzene, R113 and R134a. Results point out that ORC with out thermal storage and using refrigerant fluid ammonia is the best alternative

Formalismo canônico da mecânica clássica: alicerce da mecânica quântica

We present a succinct review of the canonical formalism of classical mechanics, followed by a brief review of the main representations of quantum mechanics. We emphasize the formal similarities between the corresponding equations. We notice that these similarities contributed to the formulation of quantum mechanics. Of course, the driving force behind the search of any new physics is based on experimental evidence

Análise da estabilidade dimensional e resistência mecânica em bambu Guadua angustifolia pós-processos de tratamentos químicos e térmico

Nowadays, bamboo is being studied because of their strength properties according with their specific mass and speed of growth, which makes it an important alternative as a new resource that will help reduce pressure on forests and helpping them favoring the minimization of uncontrolled deforestation in many regions of Brazil. This study aimed, in general, to analyze physical and mechanical properties of the material with the divulgation of its potential for industrial application. To do so, in this research were determined in relation to the physical properties, moisture content, dimensional stability and the apparent densities and the mechanics and basic, just a tension parallel to grain, in order to observe the interference of various kinds of treatments (chemical, thermal and natural) on the strength and modulus of elasticity in this request. The species used was the Guadua angustifolia, a species native of Brazil. All tests were performed at Universidade Estadual Paulista - Campus Experimental Itapeva in the laboratory of Materials Properties. The methodology used for testing of moisture, density and tension parallel to grain were based on NBR 7190/1997 for the wood, and dimensional stability tests were based on much the same as in COPANT 462/1972 (South American) . The preservative treatments conducted followed the recommendation of each manufacturer. The values obtained in tests of physical properties were satisfactory especially with respect to density and dimensional stability analyzed by the coefficient of anisotropy, showed that, compared to wood, excellent quality for the shrinkage test, obtaining a coefficient of 1.2. With respect to parallel tensile tests to fibre results showed, in most cases, that test specimens with the presence of us have lower values of resistance and modulus of elasticity when compared with those without us. In the treatment of thermal-treatment there was an apparent treatment there was an apparent increase in...