Low prevalence of atrial fibrillation in asymptomatic adults in Geneva, Switzerland

Rapport de synthèse « Faible prévalence de la fibrillation auriculaire chez des adultes asymptomatiques à Genève, Suisse » But : l'augmentation de la prévalence de la fibrillation auriculaire (FA) est dans les pays développés un problème de santé publique. L'ampleur de cette augmentation demeure cependant peu claire. L'objectif de ce travail est de déterminer la prévalence de la FA au sein d'un échantillon représentatif d'adultes asymptomatiques de plus de 50 ans. Méthode : entre janvier 2005 et décembre 2007, des individus résidants du canton de Genève et ayant déjà participé précédemment à une étude randomisée ont été invités pour un examen de contrôle. Le diagnostic de FA a été posé à l'aide d'un tracé électrocardiographique 6 pistes. Tous les tracés ont étés revus par un cardiologue. Les prévalences de FA ont ensuite été standardisées pour la distribution d'âge dans la population genevoise. Une prise de sang veineuse a été réalisée chez tous les participants après 8 heures de jeûne et la glycémie, la triglyceridémie, le cholestérol sérique total ainsi que le cholestérol HDL sérique ont été déterminés. Résultats : la participation a été de 72.8%. 29 cas de FA (22 hommes) ont été diagnostiqués parmi 3285 sujets (1696 hommes). La prévalence de la FA (95% Cl) était de 0.88% (0.86, 0.90). La prévalence standardisée pour l'âge était légèrement plus élevée [0.94% (0.91, 0.97), hommes: 1.23% (1.19, 1.27), femmes; 0.54% (0.47, 0.61)]. Les sujets avec une FA étaient plus âgés (72.1 vs. 63.1 ans, ρ < 0.0001), plus souvent de sexe masculin (75.9% vs. 50.4%, ρ = 0.0087), avaient un indice de masse corporelle plus élevé (27.9 vs. 25,9 kg/m2, ρ = 0.011), un périmètre abdominal plus important (98.8 vs. 90.2 cm, ρ = 0.0034), une tension artérielle diastolique plus élevée (80.9 vs. 75.7mmhg, ρ = 0.0093), un cholestérol sérique total plus bas (5.16 vs. 5.75mmol/L, ρ = 0.0019) et un HDL cholestérol sérique plus bas (1.31 vs. 1.48 mmol/L, ρ = 0.02). A l'anamnèse un antécédent « d'embolie artérielle » (cérébrale ou membres inférieurs) était significativement plus fréquent chez les sujets avec une FA (10.3 vs. 3.3%, ρ = 0.03). Conclusion : cette étude basée sur une population suisse asymptomatique montre une prévalence de la FA inférieure à 1%. Ces résultats sont moins alarmants que ceux obtenus lors de précédentes études.

Atributos químicos e físicos de latossolos e sua relação com os rendimentos de milho e feijão irrigados

Em sistemas de produção agrícola que utilizam a irrigação, uma das principais causas da variabilidade dos rendimentos, a disponibilidade de água para as culturas, é controlada. Nesse caso, outros fatores limitantes ao rendimento, relacionados a atributos de solo, passam a ter sua importância aumentada. Com o objetivo de investigar a variabilidade espacial dos principais atributos químicos e do rendimento de culturas, além de determinar os atributos químicos e físico-hídricos do solo em diferentes zonas de rendimento, foram analisadas duas áreas comerciais irrigadas por pivô central, com 51,8 e 58,2 ha, localizadas, respectivamente, em Trindade do Sul (TS) e Palmeira das Missões (PM), no Rio Grande do Sul (RS). As amostragens para caracterização dos atributos químicos foram georreferenciadas seguindo uma malha regular de 100 x 100 m, na camada de 0-0,10 m. Já para investigar a relação entre os atributos químicos e físico-hídricos do solo com os rendimentos obtidos, dada a extensão das áreas, três zonas com distinto potencial produtivo foram estabelecidas, utilizando os mapas de rendimento disponíveis (safras de feijão-preto de 2005/2006 e safrinha de 2006 em TS, e de milho de 2002/2003 e 2003/2004 em PM), obtidos por colhedoras equipadas com sensores de rendimento. Nessas zonas, quinze pontos amostrais foram investigados em cada área nas camadas de 0-0,05, 0,05-0,10 e 0,10-0,20 m. Os atributos químicos do solo foram submetidos à análise de estatística descritiva e geoestatística. Eles apresentaram dependência espacial classificada como forte e moderada, com modelo ajustado à semivariância predominantemente esférico. O P apresentou a maior variabilidade espacial e o pH a menor. Embora manejadas sob irrigação, ambas as áreas apresentaram variabilidade espacial de rendimento. Na zona de baixo rendimento de TS, foram constatadas acidez no solo, baixa saturação de bases e menor capacidade de água disponível, e na de PM foram observadas limitações físicas representadas por compactação por meio dos indicadores densidade, resistência à penetração e macroporosidade. A ocorrência de zonas com menor rendimento das culturas irrigadas nas duas áreas foi associada a limitações químicas e físicas do solo, especialmente em subsuperfície.

Improvement of a testing apparatus for dynamometry: procedures for penetrometry and influence of strain rate to quantify the tensile strength of soil aggregates

Soil penetration resistance (PR) and the tensile strength of aggregates (TS) are commonly used to characterize the physical and structural conditions of agricultural soils. This study aimed to assess the functionality of a dynamometry apparatus by linear speed and position control automation of its mobile base to measure PR and TS. The proposed equipment was used for PR measurement in undisturbed samples of a clayey "Nitossolo Vermelho eutroférrico" (Kandiudalfic Eutrudox) under rubber trees sampled in two positions (within and between rows). These samples were also used to measure the volumetric soil water content and bulk density, and determine the soil resistance to penetration curve (SRPC). The TS was measured in a sandy loam "Latossolo Vermelho distrófico" (LVd) - Typic Haplustox - and in a very clayey "Nitossolo Vermelho distroférrico" (NVdf) - Typic Paleudalf - under different uses: LVd under "annual crops" and "native forest", NVdf under "annual crops" and "eucalyptus plantation" (> 30 years old). To measure TS, different strain rates were applied using two dynamometry testing devices: a reference machine (0.03 mm s-1), which has been widely used in other studies, and the proposed equipment (1.55 mm s-1). The determination coefficient values of the SRPC were high (R² > 0.9), regardless of the sampling position. Mean TS values in LVd and NVdf obtained with the proposed equipment did not differ (p > 0.05) from those of the reference testing apparatus, regardless of land use and soil type. Results indicate that PR and TS can be measured faster and accurately by the proposed procedure.

Magnetic susceptibility to identify landscape segments on a detailed scale in the region of Jaboticabal, São Paulo, Brazil

The agricultural potential is generally assessed and managed based on a one-dimensional vision of the soil profile, however, the increased appreciation of sustainable production has stimulated studies on faster and more accurate evaluation techniques and methods of the agricultural potential on detailed scales. The objective of this study was to investigate the possibility of using soil magnetic susceptibility for the identification of landscape segments on a detailed scale in the region of Jaboticabal, São Paulo State. The studied area has two slope curvatures: linear and concave, subdivided into three landscape segments: upper slope (US, concave), middle slope (MS, linear) and lower slope (LS, linear). In each of these segments, 20 points were randomly sampled from a database with 207 samples forming a regular grid installed in each landscape segment. The soil physical and chemical properties, CO2 emissions (FCO2) and magnetic susceptibility (MS) of the samples were evaluated represented by: magnetic susceptibility of air-dried fine earth (MS ADFE), magnetic susceptibility of the total sand fraction (MS TS) and magnetic susceptibility of the clay fraction (MS Cl) in the 0.00 - 0.15 m layer. The principal component analysis showed that MS is an important property that can be used to identify landscape segments, because the correlation of this property within the first principal component was high. The hierarchical cluster analysis method identified two groups based on the variables selected by principal component analysis; of the six selected variables, three were related to magnetic susceptibility. The landscape segments were differentiated similarly by the principal component analysis and by the cluster analysis using only the properties with higher discriminatory power. The cluster analysis of MS ADFE, MS TS and MS Cl allowed the formation of three groups that agree with the segment division established in the field. The grouping by cluster analysis indicated MS as a tool that could facilitate the identification of landscape segments and enable the mapping of more homogeneous areas at similar locations.

Modelo para estimativa da infiltração de água e perfil de umidade do solo

A adequada modelagem da infiltração de água no solo é fundamental para estimação do movimento de água, erosão hídrica, recarga e contaminação de aquíferos. Este trabalho apresenta um modelo para estimativa da infiltração de água no solo (GAML-c), com base no modelo de Green-Ampt-Mein-Larson, que provê descrição da geometria e do deslocamento da frente de umedecimento no solo. Testes experimentais foram conduzidos em Latossolo Vermelho-Amarelo para avaliar o GAML-c, usando-se quatro diferentes cenários: considerando a condutividade hidráulica do solo igual à taxa de infiltração estável (Tie) e a umidade máxima do solo igual ao teor de água na zona de transmissão (θw) (TW); condutividade hidráulica do solo igual à do solo saturado (K0) e a umidade máxima do solo igual θw (KW); condutividade hidráulica do solo igual à Tie e a umidade máxima do solo igual ao teor de água na saturação (θs) (TS); e condutividade hidráulica do solo igual a K0 e a umidade máxima do solo igual θs (KS). Verificou-se que o GAML-c no cenário TW foi o melhor estimador do perfil de umidade do solo, resultando em aceitáveis estimativas da infiltração de água.

Structure and magnetic properties of Sm/Fe multilayers versus substrate temperature

Three Sm(2 Å)/Fe(3 Å) multilayers have been made using two electron beams in a high vacuum chamber onto very thin Kapton foils at different substrate temperatures, (Ts=40°C, 150°C and 230°C), with the same total thickness of 3000 Å. We have found that the substrate temperature strongly affects structure and magnetic properties of the samples. For a substrate temperature of 150°C the sample behaves as a three dimensional random magnet.

A fully automated hot-wall multiplasma-monochamber reactor for thin film deposition

We present a study on the development and the evaluation of a fully automated radio-frequency glow discharge system devoted to the deposition of amorphous thin film semiconductors and insulators. The following aspects were carefully addressed in the design of the reactor: (1) cross contamination by dopants and unstable gases, (2) capability of a fully automated operation, (3) precise control of the discharge parameters, particularly the substrate temperature, and (4) high chemical purity. The new reactor, named ARCAM, is a multiplasma-monochamber system consisting of three separated plasma chambers located inside the same isothermal vacuum vessel. Thus, the system benefits from the advantages of multichamber systems but keeps the simplicity and low cost of monochamber systems. The evaluation of the reactor performances showed that the oven-like structure combined with a differential dynamic pumping provides a high chemical purity in the deposition chamber. Moreover, the studies of the effects associated with the plasma recycling of material from the walls and of the thermal decomposition of diborane showed that the multiplasma-monochamber design is efficient for the production of abrupt interfaces in hydrogenated amorphous silicon (a-Si:H) based devices. Also, special attention was paid to the optimization of plasma conditions for the deposition of low density of states a-Si:H. Hence, we also present the results concerning the effects of the geometry, the substrate temperature, the radio frequency power and the silane pressure on the properties of the a-Si:H films. In particular, we found that a low density of states a-Si:H can be deposited at a wide range of substrate temperatures (100°C<Ts<300°C).

The effects of land use and soil management on the physical properties of an Oxisol in Southeast Brazil

Soils of the tropics are prone to a decrease in quality after conversion from native forest (FO) to a conventional tillage system (CT). However, the adoption of no-tillage (NT) and complex crop rotations may improve soil structural quality. Thus, the aim of this study was to evaluate the physical properties of an Oxisol under FO, CT, and three summer crop sequences in NT: continuous corn (NTcc), continuous soybean (NTcs), and a soybean/corn rotation (NTscr). Both NT and CT decreased soil organic carbon (SOC) content, SOC stock, water stable aggregates (WSA), geometric mean diameter (GMD), soil total porosity (TP), macroporosity (MA), and the least limiting water range (LLWR). However they increased soil bulk density (BD) and tensile strength (TS) of the aggregates when compared to soil under FO. Soil under NT had higher WSA, GMD, BD, TS and microporosty, but lower TP and MA than soil under CT. Soil under FO did not attain critical values for the LLWR, but the lower limit of the LLWR in soils under CT and NT was resistance to penetration (RP) for all values of BD, while the upper limit of field capacity was air-filled porosity for BD values greater than 1.46 (CT), 1.40 (NTscr), 1.42 (NTcc), and 1.41 (NTcs) kg dm-3. Soil under NTcc and NTcs decreased RP even with the increase in BD because of the formation of biopores. Furthermore, higher critical BD was verified under NTcc (1.62 kg dm-3) and NTcs (1.57 kg dm-3) compared to NTscr and CT (1.53 kg dm-3).