Sedimentação de nutrientes e material particulado em reservatório sob influência de atividades de piscicultura no semiárido do Rio Grande do Norte

Nutrient levels in water reservoirs have been increasing over the years worldwide and fish farming is one of the activities with the potential to cause negative impacts on these environments. Thus, the sedimentation of the main nutrients was evaluated in a reservoir as well as the contribution of aquaculture in raising these rates. The results indicated a significant difference for all nutrients, with higher concentrations in areas near the fish farming, and lower levels in more distant regions. Therefore, assessments that focus only on the water column do not reflect the true impact of this activity.

Potentiometric determination of Nickel (II) ion using 2-hydroxy-1-naphthylidene-N-cyanoacetohydrazone as electroactive material

A potentiometric Nickel sensor was prepared using 2-hydroxy-1-naphthylidene-N-cyanoacetohydrazone as electro-active material and epoxy resin as a binding material. A membrane composed of 40% Schiff's base and 60% epoxy resin exhibited the best performance. The membrane showed excellent response in the concentration range of 0.15 ppm to 0.1 mol L- 1 Ni+2 ions with non-Nernstian slope of 22.0 mV/decade, had a rapid response time (less than 10 s), and can be used for three months without any considerable loss of potential. The sensor was useful within the pH range of 1.3 to 9.6, and was able to discriminate between Ni2+ and a large number of alkaline earth and transition metal ions. The practical utility of the sensor has been demonstrated by using it successfully as an indicator electrode in the potentiometric titration of Ni2+ with EDTA and oxalic acid.

OBTENÇÃO E CARACTERIZAÇÃO DE MATERIAL HÍBRIDO ENTRE SÍLICA E CICLODEXTRINAS

The obtention of silica and cyclodextrin hybrid materials was accomplished by refluxing them in xylol using citric acid as a binding agent. The materials were characterized by infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, and elemental analysis. Evidence for the docking of cyclodextrins α and γ was substantiated based on the variation in band intensity for groups such as ≡Si-OH. Additional docking evidence includes the displacement of some of the bands that are related to cyclodextrin such as the deformation of the C-H axial bond. The α and γ-CDSi materials were characterized as amorphous compounds. The products obtained in the synthesis showed changes in the decomposition temperatures of their isolated constituents, in which the mass of α and γ-CD docked to the silica surface gave the estimated values of 41% and 47%, respectively. The elemental constituents were shown to be consistent and close to their relative theoretical values. ​Thermogravimetric analysis showed that a reduction in the percentage of the hybrids was proportional to the amount of lost mass. This new material is an improvement over synthesized organosilane materials because the operator and the environment benefit from a less toxic methodology. In addition, the material has several potential applications in complexation systems with cyclodextrin.

Surface Modification of Ceramics

Ceramics are widely used in industrial applications due to their advantageous thermal and mechanical stability. Corrosion of ceramics is a great problem resulting in significant costs. Coating is one method of reducing adversities of corrosion. There are several different thin film deposition processes available such as sol-gel, Physical and Chemical Vapour Deposition (PVD and CVD). One of the CVD processes, called Atomic Layer Deposition (ALD) stands out for its excellent controllability, accuracy and wide process capability. The most commonly mentioned disadvantage of this method is its slowness which is partly compensated by its capability of processing large areas at once. Several factors affect the ALD process. Such factors include temperature, the grade of precursors, pulse-purge times and flux of precursors as well as the substrate used. Wrongly chosen process factors may cause loss of self-limiting growth and thus, non-uniformities in the deposited film. Porous substrates require longer pulse times than flat surfaces. The goal of this thesis was to examine the effects of ALD films on surface properties of a porous ceramic material. The analyses applied were for permeability, bubble point pressure and isoelectric point. In addition, effects of the films on corrosion resistance of the substrate in aqueous environment were investigated. After being exposured to different corrosive media the ceramics and liquid samples collected were analysed both mechanically and chemically. Visual and contentual differences between the exposed and coated ceramics versus the untreated and uncoated ones were analysed by scanning electron microscope. Two ALD film materials, dialuminium trioxide and titanium dioxide were deposited on the ceramic substrate using different pulse times. The results of both film materials indicated that surface properties of the ceramic material can be modified to some extent by the ALD method. The effect of the titanium oxide film on the corrosion resistance of the ceramic samples was observed to be fairly small regardless of the pulse time.

Rigid Rod Polymer Fillers in Acrylic Denture and Dental Adhesive Resin Systems

Polymeric materials have been used in dental applications for decades. Adhesion of polymeric materials to each other and to the tooth substrate is essential to their successful use. The aim of this series of studies was two-folded. First, to improve adhesion of poly(paraphenylene) based rigid rod polymer (RRP) to other dental polymers, and secondly, to evaluate the usability of a new dentin primer system based on RRP fillers. Poly(paraphenylene) based RRP would be a tempting material for dental applications because of its good mechanical properties. To be used in dental applications, reliable adhesion between RRP and other dental polymers is required. In this series of studies, the adhesion of RRP to denture base polymer and the mechanical properties of RRP-denture base polymer-material combination were evaluated. Also adhesion of BisGMA-TEGDMA-resin to RRP was determined. Different surface treatments were tested to improve the adhesion of BisGMA-TEGDMA-resin to RRP. Results were based on three-point bending testing, Vickers surface hardness test and scanning electron microscope analysis (SEM), which showed that no reliable adhesion between RRP and denture base polymer was formed. Addition of RRP filler to denture base polymer increased surface hardness and flexural modulus but flexural strength decreased. Results from the shear bond strength test and SEM revealed that adhesion between resin and RRP was possible to improve by surface treatment with dichloromethane (DCM) based primer and a new kind of adhesive surface can be designed. The current dentin bonding agents have good immediate bond strength, but in long term the bond strength may decrease due to the detrimental effect of water and perhaps by matrix metalloproteinases. This leads to problems in longevity of restorations. Current bonding agents use organic monomers. In this series of studies, RRP filled dentin primer was tested in order to decrease the water sorption of the monomer system of the primers. The properties of new dentin primer system were evaluated in vitro by comparing it to commercial etch and rinse adhesive system. The results from the contact angle measurements and SEM showed that experimental primer with RRP reinforcement provided similar resin infiltration to dentin collagen and formed the resin-dentin interface as the control primer. Microtensile bond strength test and SEM revealed that in short term water storing, RRP increased bond strength and primer with BMEP-monomer (bis[2-(methacryloyloxy)-ethyl]phosphate) and high solvent concentration provided comparable bonding properties to the commercial control primers. In long term water storing, the high solvent-monomer concentration of the experimental primers decreased bond strength. However, in low solvent-monomer concentration groups, the long-term water storing did not decrease the bond strength despite the existence of hydrophilic monomers which were used in the system. These studies demonstrated that new dentin primer system reached the mechanical properties of current traditional etch and rinse adhesive system in short time water storing. Improved properties can be achieved by further modifications of the monomer system. Studies of the adhesion of RRP to other polymers suggest that adhesion between RRP and other dental polymers is possible to obtain by certain surface treatments.

Desenvolvimento e aplicação de método GC-MS/MS para análise simultânea de 17 HPAs em material particulado atmosférico

Os hidrocarbonetos policíclicos aromáticos (HPAs) estão associados ao aumento da incidência de diversos tipos de cânceres no homem. Essas moléculas são formadas principalmente na queima incompleta de matéria orgânica, sendo encontradas em todos os compartimentos ambientais. Órgãos regulamentadores das áreas ambiental e de saúde ocupacional consideram 17 HPAs como contaminantes atmosféricos prioritários. Este trabalho apresenta um método para análise simultânea destes HPAs utilizando-se a cromatografia a gás acoplada à espectrometria de massas operando no modo tandem (GC-MS/MS). Os limites de detecção e quantificação do método mostraram-se até 5 vezes inferiores aos obtidos no método GC-MS (SCAN). O método mostrou-se seletivo para análise de HPAs em extratos de amostras de material particulado atmosférico. Uma análise comparativa de dois sistemas de solventes (diclorometano/metanol 4:1 v/v e hexano/acetona 1:1 v/v) para a extração de HPAs, utilizando amostras de material particulado atmosférico, revelou que ambas as misturas de solventes possuem poder de extração semelhante. Os resultados sugerem que é possível realizar extração de HPAs de material particulado atmosférico em ultra-som com a mistura hexano/acetona (1:1), que é menos tóxica em relação à mistura diclorometano/metanol (4:1), bastante utilizada nestas análises, sem perdas significativas na exatidão do método.

Aplicação de material zeolítico sintetizado de cinzas de carvão como adsorvente de poluentes em água

Cinzas leve de carvão tratadas pelo método hidrotérmico foram usadas como adsorvente de baixo custo para a remoção de íons metálicos e corante de solução aquosa. As isotermas de adsorção das cinzas leve tratadas foram estudadas e os resultados foram ajustados pelos modelos de Langmuir e Freundlich. A isoterma de Freundlich descreveu melhor o processo de adsorção do azul de metileno. Os dados de equilíbrio para a adsorção dos íons zinco e cádmio se ajustaram melhor á equação de Langmuir. O valor máximo de capacidade de adsorção obtido foi de 0,78 (mg g-1)(L mg)1/n para o azul de metileno, 38,1 mg g-1 para o Zn2+ e 67, 5 mg g-1 para o Cd2+. Os materiais sintetizados exibiram capacidades de adsorção muito maiores do que as das cinzas leves usadas como matéria-prima. O estudo mostrou que o material zeólitico pode efetivamente adsorver azul de metileno e íons metálicos com eficiências de remoção na faixa de 82-99%.

Synthesis and characterization of Fe(III)-doped ceramic membranes of titanium dioxide and its application in photoelectrocatalysis of a textile dye

Pure and Fe(III)-doped TiO2 suspensions were prepared by the sol gel method with the use of titanium isopropoxide (Ti(OPri)4) as precursor material. The properties of doped materials were compared to TiO2 properties based on the characterization by thermal analysis (TG-DTA and DSC), X-ray powder diffractometry and spectroscopy measurements (FTIR). Both undoped and doped TiO2 suspensions were used to coat metallic substrate as a mean to make thin-film electrodes. Thermal treatment of the precursors at 400ºC for 2 h in air resulted in the formation of nanocrystalline anatase TiO2. The thin-film electrodes were tested with respect to their photocatalytic performance for degradation of a textile dye in aqueous solution. The plain TiO2 remains as the best catalyst at the conditions used in this report.

Effects of Silica Based Biomaterials on Bone Marrow Derived Cells - Material Aspects of Bone Regeneration

Silica based biomaterials, such as melt-derived bioactive glasses and sol-gel glasses, have been used for a long time in bone healing applications because of their ability to form hydroxyapatite and to stimulate stem cell proliferation and differentiation. In this study, bone marrow derived cells were cultured with bioactive glass and sol-gel silica, and seeded into porous polymer composite scaffolds that were then implanted femorally and subcutaneously in rats to monitor their migration inside host tissue. Bone marrow derived cells were also injected intraperitoneally. Transplanted cells migrated to various tissues inside the host, including the lung, liver spleen, thymus and bone marrow. The method of transplantation affected the time frame of cell migration, with intraperitoneal injection being the fastest and femoral implantation the slowest, but not the target tissues of migration. Transplanted donor cells had a limited lifetime in the host and were later eliminated from all tested tissues. Bioactive glass, however, affected the implanted cells negatively. When it was present in the scaffold no donor cells were found in any of the tested host tissues. Bioactive glass S53P4 was found to support both osteoblastic and osteoclastic phenotype of bone marrow derived cells, but it was resistant to the resorbing effect of osteoclastic bone marrow derived cells, showing that bioactive glass is rather dissolved through physicochemical reactions than resorbed by cells. Fast-dissolving silica sol gel in microparticulate form was found to increase collagen formation by bone marrow derived cells, while slow dissolving silica microparticles enhanced their proliferation, suggesting that the dissolution rate of silica controls the response of bone marrow derived cells.

In vitro effect of substrate, temperature and photoperiod on Phakopsora pachyrhizi urediniospore germination and germ tube growth

In vitro experiments were conducted to assess the effects of substrate, temperature and time of exposure to temperature and photoperiod on P. pachyrhizi uredospore germination and germ tube growth. The following substrates were tested: water-agar and soybean leaf extract-agar at different leaf concentrations (0.5, 1.0, 2.0 and 4.0 g of leaves and 15g agar/L water), temperatures (10, 15, 20, 25, 30, and 35oC) and times of exposure (1, 2, 3, 4, 5, 6, 7, and 8 hours) to temperature and 12 different photoperiods. The highest germination and germ tube length was found for the soybean leaf extract agar. Maximum P. pachyrhizi uredospore germination was obtained at 21.8 and 22.3°C, and maximum germ tube growth at 21.4 and 22.1°C. The maximum uredospore germination was found at 6.4 hours exposure, while the maximum germ tube length was obtained at 7.7 h exposure. Regarding photoperiod, the maximum spore germination and the maximum uredospore germ tube length were found in the dark. Neither spore germination nor uredospore germ tube growth was completely inhibited by the exposure to continuous light.

Uso de material didático sobre embriologia do sistema nervoso: avaliação dos estudantes

A Embriologia Humana é de extrema importância na formação de profissionais de saúde, porém seu estudo, muitas vezes, é considerado desestimulante, decorativo e sem significado prático para muitos estudantes, tornando-se pouco efetivo. Este trabalho objetivou produzir material didático interativo com modelos embrionários representativos do desenvolvimento embrionário do sistema nervoso. Para avaliar de forma qualitativa a real efetividade e capacidade de facilitar o processo de ensino-aprendizagem no contexto da Aprendizagem Baseada em Problemas, o material foi aplicado aos estudantes da primeira série de Medicina e Enfermagem da Faculdade de Medicina de Marília. Os estudantes consideraram que o material contribuiu para o entendimento do tema e facilitou a visualização dos eventos embrionários, além de despertar o interesse pelo estudo da disciplina. O material serviu como recurso para sedimentar o conhecimento e suscitou nos estudantes a integração dos conhecimentos com outras disciplinas. Em termos qualitativos, a análise dos questionários dos estudantes indicou que o material didático produzido foi efetivo na aprendizagem e funcionou como recurso na aprendizagem autodirigida, favorecendo a diversificação de fontes de busca e sendo complementar a livros-texto e outros materiais teóricos.

Inclusão de material herborizado em metacrilato para estudos de anatomia vegetal

As técnicas usuais empregadas no processamento de materiais herborizados são limitantes porque não permitem reproduzir um laminário permanente e porque o registro dos resultados é temporário. Em estudos de anatomia aplicada à taxonomia, muitas vezes, é necessário utilizar exsicatas. Este trabalho teve como objetivo testar a utilização de metacrilato (Historesin, Leica) na preparação e inclusão de material herborizado, visando a obtenção de laminário permanente. Foram utilizadas folhas de plantas herborizadas do gênero Senecio Tourn. ex L. (Asteraceae), previamente reidratadas em H2O e armazenadas em etanol 70%. As amostras foram desidratadas em série etanólica e submetidas à (1v:1v) mistura de AE 95% e resina pura. Durante a infiltração, com resina pura, o material foi submetido a vácuo durante 72 horas. Os blocos foram cortados em micrótomo de avanço automático, com navalhas de aço descartáveis, e os cortes foram corados com azul-de-toluidina (pH 4,0). As lâminas foram montadas em Permount. O laminário permanente obtido apresentou qualidade superior à dos produzidos pelas técnicas usuais, pois foi possível obter cortes seriados, com espessura determinada. Essa técnica possibilitou otimizar a obtenção de cortes, a partir de pequenos fragmentos de exsicatas.

Avaliação do processo produtivo de uma indústria de manufatura de painéis por meio do balanço de material e do rendimento da matéria-prima

O trabalho foi desenvolvido no setor de manufatura de painéis da Battistella Indústria e Comércio Ltda., localizada em Santa Catarina, e teve como objetivo a avaliação do processo produtivo de painéis, utilizando-se os princípios do balanço de material e do rendimento da matéria-prima. Além disso, pretendeu-se estabelecer uma metodologia para aplicação em outras indústrias madeireiras. Os dados foram obtidos através de visitas, aplicação de questionários e dados de escritório, e elaboraram-se equações e um fluxograma para representar o balanço de material. Concluiu-se que a indústria é integrada, representando vantagem competitiva. O balanço de material indicou que a atividade com maior potencial gerador de resíduos foi a preparação de sarrafos de madeira (55,71% do total de resíduos gerados). As atividades com maiores rendimentos foram a prensagem (97,44%), o seccionamento (93,92%), o esquadrejamento (93,51), o lixamento (90,97%) e a preparação de sarrafos (54,51%). O rendimento geral da manufatura foi de 63,16%, sendo os valores encontrados no trabalho similares aos da literatura. A metodologia desenvolvida para o trabalho é simples e pode ser aplicada em outras indústrias do setor madeireiro.

Determinação do fator de conversão em colônias de Atta sexdens rubropilosa (Hymenoptera: Formicidae) e sua relação com a qualidade do material vegetal cortado

As formigas cortadeiras (Atta e Acromyrmex) são consideradas importantes pragas na agricultura e silvicultura, mas pouco se sabe sobre os reais danos dessas espécies. Uma forma bastante difundida de avaliação do dano é por meio do cálculo da taxa de conversão, dividindo-se o peso do material cortado pelo peso de lixo produzido pelas colônias. Foi levantada a hipótese de que a qualidade do substrato cortado pode influenciar no forrageamento das operárias, alterando a taxa de conversão e dificultando as estimativas de dano. A taxa de conversão de oito colônias de Atta sexdens rubropilosa Forel (Hymenoptera: Formicidae) foi calculada com duas espécies vegetais com diferentes concentrações de lignina e celulose, para testar essa hipótese. Colônias mantidas com folhas de baixa qualidade (razão lignina/celulose elevada) tiveram maior forrageamento e produziram mais lixo. Entretanto, a taxa de conversão das colônias foi semelhante com essas duas plantas (média = 1,54). Esse valor está dentro da variação encontrada para outras espécies no campo (1,5-1,8), indicando um fator semelhante de conversão entre os gêneros Atta e Acromyrmex. O consumo médio de material vegetal, em termos de pesos seco e fresco, de uma colônia de A. sexdens rubropilosa com 4.500 operárias, foi estimado em 520 e 1.100 g/ano, respectivamente.

Wood as a model material for medical biomaterials. In vivo and in vitro studies with bone and Betula pubescens Ehrh

Novel biomaterials are needed to fill the demand of tailored bone substitutes required by an ever‐expanding array of surgical procedures and techniques. Wood, a natural fiber composite, modified with heat treatment to alter its composition, may provide a novel approach to the further development of hierarchically structured biomaterials. The suitability of wood as a model biomaterial as well as the effects of heat treatment on the osteoconductivity of wood was studied by placing untreated and heat‐treated (at 220 C , 200 degrees and 140 degrees for 2 h) birch implants (size 4 x 7mm) into drill cavities in the distal femur of rabbits. The follow‐up period was 4, 8 and 20 weeks in all in vivo experiments. The flexural properties of wood as well as dimensional changes and hydroxyl apatite formation on the surface of wood (untreated, 140 degrees C and 200 degrees C heat‐treated wood) were tested using 3‐point bending and compression tests and immersion in simulated body fluid. The effect of premeasurement grinding and the effect of heat treatment on the surface roughness and contour of wood were tested with contact stylus and non‐contact profilometry. The effects of heat treatment of wood on its interactions with biological fluids was assessed using two different test media and real human blood in liquid penetration tests. The results of the in vivo experiments showed implanted wood to be well tolerated, with no implants rejected due to foreign body reactions. Heat treatment had significant effects on the biocompatibility of wood, allowing host bone to grow into tight contact with the implant, with occasional bone ingrowth into the channels of the wood implant. The results of the liquid immersion experiments showed hydroxyl apatite formation only in the most extensively heat‐treated wood specimens, which supported the results of the in vivo experiments. Parallel conclusions could be drawn based on the results of the liquid penetration test where human blood had the most favorable interaction with the most extensively heat‐treated wood of the compared materials (untreated, 140 degrees C and 200 degrees C heat‐treated wood). The increasing biocompatibility was inferred to result mainly from changes in the chemical composition of wood induced by the heat treatment, namely the altered arrangement and concentrations of functional chemical groups. However, the influence of microscopic changes in the cell walls, surface roughness and contour cannot be totally excluded. The heat treatment was hypothesized to produce a functional change in the liquid distribution within wood, which could have biological relevance. It was concluded that the highly evolved hierarchical anatomy of wood could yield information for the future development of bulk bone substitutes according to the ideology of bioinspiration. Furthermore, the results of the biomechanical tests established that heat treatment alters various biologically relevant mechanical properties of wood, thus expanding the possibilities of wood as a model material, which could include e.g. scaffold applications, bulk bone applications and serving as a tool for both mechanical testing and for further development of synthetic fiber reinforced composites.