986 resultados para Sorghum Bicolor
Resumo:
Kafirin microparticles have been proposed as an oral nutraceutical and drug delivery system. This study investigates microparticles formed with kafirin extracted from white and raw versus cooked red sorghum grains as an oral delivery system. Targeted delivery to the colon would be beneficial for medication such as prednisolone, which is used in the management of inflammatory bowel disease. Therefore, prednisolone was loaded into microparticles of kafirin from the different sources using phase separation. Differences were observed in the protein content, in vitro protein digestibility, and protein electrophoretic profile of the various sources of sorghum grains, kafirin extracts, and kafirin microparticles. For all of the formulations, the majority of the loaded prednisolone was not released in in vitro conditions simulating the upper gastrointestinal tract, indicating that most of the encapsulated drug could reach the target area of the lower gastrointestinal tract. This suggests that these kafirin microparticles may have potential as a colon-targeted nutraceutical and drug delivery system.
Resumo:
Increased productivity in sorghum has been achieved in the developed world using hybrids. Despite their yield advantage, introduced hybrids have not been adopted in Ethiopia due to the lack of adaptive traits, their short plant stature and small grain size. This study was conducted to investigate hybrid performance and the magnitude of heterosis of locally adapted genotypes in addition to introduced hybrids in three contrasting environments in Ethiopia. In total, 139 hybrids, derived from introduced seed parents crossed with locally adapted genotypes and introduced R lines, were evaluated. Overall, the hybrids matured earlier than the adapted parents, but had higher grain yield, plant height, grain number and grain weight in all environments. The lowland adapted hybrids displayed a mean better parent heterosis (BPH) of 19%, equating to 1160 kg ha− 1 and a 29% mean increase in grain yield, in addition to increased plant height and grain weight, in comparison to the hybrids derived from the introduced R lines. The mean BPH for grain yield for the highland adapted hybrids was 16% in the highland and 52% in the intermediate environment equating to 698 kg ha− 1 and 2031 kg ha− 1, respectively, in addition to increased grain weight. The magnitude of heterosis observed for each hybrid group was related to the genetic distance between the parental lines. The majority of hybrids also showed superiority over the standard check varieties. In general, hybrids from locally adapted genotypes were superior in grain yield, plant height and grain weight compared to the high parents and introduced hybrids indicating the potential for hybrids to increase productivity while addressing farmers' required traits.
Resumo:
Crop models are simplified mathematical representations of the interacting biological and environmental components of the dynamic soil–plant–environment system. Sorghum crop modeling has evolved in parallel with crop modeling capability in general, since its origins in the 1960s and 1970s. Here we briefly review the trajectory in sorghum crop modeling leading to the development of advanced models. We then (i) overview the structure and function of the sorghum model in the Agricultural Production System sIMulator (APSIM) to exemplify advanced modeling concepts that suit both agronomic and breeding applications, (ii) review an example of use of sorghum modeling in supporting agronomic management decisions, (iii) review an example of the use of sorghum modeling in plant breeding, and (iv) consider implications for future roles of sorghum crop modeling. Modeling and simulation provide an avenue to explore consequences of crop management decision options in situations confronted with risks associated with seasonal climate uncertainties. Here we consider the possibility of manipulating planting configuration and density in sorghum as a means to manipulate the productivity–risk trade-off. A simulation analysis of decision options is presented and avenues for its use with decision-makers discussed. Modeling and simulation also provide opportunities to improve breeding efficiency by either dissecting complex traits to more amenable targets for genetics and breeding, or by trait evaluation via phenotypic prediction in target production regions to help prioritize effort and assess breeding strategies. Here we consider studies on the stay-green trait in sorghum, which confers yield advantage in water-limited situations, to exemplify both aspects. The possible future roles of sorghum modeling in agronomy and breeding are discussed as are opportunities related to their synergistic interaction. The potential to add significant value to the revolution in plant breeding associated with genomic technologies is identified as the new modeling frontier.
Resumo:
A carência de herbicidas registrados para o controle de plantas daninhas, em sorgo sacarino, torna-se fator limitante à produção. Objetivou-se avaliar a seletividade de herbicidas em sorgo sacarino e a eficiência no controle de plantas daninhas. O delineamento experimental foi de blocos ao acaso, com quarto repetições. Os tratamentos incluíram cultivares de sorgo sacarino (BRS 506, BRS 509 e BRS 511) e herbicidas aplicados isoladamente em pré-emergência (atrazine - 1.500 g ha-1; atrazine + s-metolachlor - 1.665 g ha-1 + 1.035 g ha-1; flumioxazin - 50 g ha-1; s-metolachlor - 1.440 g ha-1) e pós-emergência (tembotrione - 100,8 g ha-1) e de forma sequencial em pré e pós-emergência (atrazine + s-metolachlor + tembotrione - 1.665 g ha-1 + 1.035 g ha-1 + 100,8 g ha-1; atrazine + tembotrione - 1.500 g ha-1 + 100,8 g ha-1; flumioxazin + tembotrione - 50 g ha-1 + 100,8 g ha-1), mais duas testemunhas, uma capinada e outra sem capina. A fitotoxicidade ao sorgo foi de 98,0 %, 98,0 % e 100 % de tembotrione; 100 %, 98,7 % e 100 % de flumioxazin + tembotrione; 100 %, 100 % e 100 % de atrazine + s-metolachlor + tembotrione; e 98,7 %, 98,7 % e 99,7 % de atrazine + tembotrione, respectivamente para as cultivares BRS 509, BRS 506 e BRS 511. Tembotrione, flumioxazin + tembotrione, atrazine + s-metolachlor + tembotrione e atrazine + tembotrione apresentaram bom controle de Ipomoea indivisa, Digitaria ciliaris e Urochloa plantaginea, porém, não demonstraram seletividade às cultivares de sorgo. O atrazine, de modo geral, apresentou maior seletividade aos componentes de rendimento das cultivares BRS 509 e BRS 506.
Resumo:
2011
Resumo:
The purpose of this study was to determine if there was a difference in sorghum yield between the Mossi zai hole and the Gourounsi zai hole, specifically examining the effects of manure and soil water conservation. A study field was created with six different treatments: (1) control with traditional management (no zai holes), (2) traditional management with manure, (3) Mossi zai holes with no manure, (4) Mossi zai holes with manure, (5) Gourounsi zai holes with no manure, and (6) Gourounsi zai holes with manure. Soil moisture readings were taken after each rainstorm (about weekly), soil properties were analyzed before planting and after harvest and above ground biomass was weighed at harvest. Manure was the only variable that significantly increased crop yield. This is different from the original hypothesis; zai holes were thought to be the main driver of increased crop yield in Sahelian West Africa. Zai holes did not have a significant effect on soil moisture.
Resumo:
Efficacy of pollination bags made of new nonwoven fabrics was compared with the traditional paper bags in sorghum during 2015 using three cultivars comprising BR007B (red seeded), SC283 (white seeded) and 1167048 hybrid with tannin (brown seeded). The five pollination bag treatments were: no bagging, traditional paper bag, paper bag plus plastic screen bag for extra bird protection, duraweb®SG2 polypropylene bag and duraweb®SG1 polyester bag. There was no bird damage on tannin hybrid but birds damaged bags to access grains of the other two varieties. Varieties and bag types differed significantly, and also showed significant interactions for panicle weight (at P<0.06), seed weight and average seed weight per panicle. The tannin hybrid was consistently a better performer for all traits regardless of bag type. The paper bags were the worst for bird damage. Duraweb® SG1 was the best performer for all traits including bird damage followed by duraweb®SG2. The joint regression analysis showed that BR007B performed consistently under all bag types with average response. On the other hand, SC283 improved its response with the increasing quality of bag type at an above average rate for panicle weight and seed traits. It was concluded that new nonwoven fabric bags could replace paper bags in providing better seed production potential and greater protection against bird damage.
Resumo:
Objetivou-se com este trabalho avaliar a influência de temperaturas constantes na germinação de sementes de espécies de plantas daninhas da família Poaceae que apresentam ocorrência em áreas de pastagem, para isto, foram analisadas as sementes de Digitaria insularis, Leptochloa virgata, Pennisetum setosum e Sorghum halepense coletadas manualmente de diversas plantas em áreas de pastagem. As sementes foram dispostas em caixas gerbox sobre folha dupla de papel "germitest", umedecido com água destilada equivalente a 2,5 vezes a massa do papel seco. As caixas foram incubadas em três germinadores verticais tipo MANGELSDORF com as temperaturas de 25ºC, 30ºC e 35ºC e fotoperíodo de 12 horas. As avaliações foram realizadas, efetuando-se a contagem diária das ocorrências germinativas, a partir da protrusão da radícula, durante 28 dias após o início do estudo. Os parâmetros avaliados foram porcentagem e índice de velocidade de germinação (IVG), efetuando-se a análise estatística pela análise de variância com comparação de médias pelo teste de Tukey a 5% de probabilidade e transformação dos resultados de porcentagem de germinação. As temperaturas que proporcionam os melhores resultados de porcentagem e velocidade de germinação são 30 e 35°C, para as espécies de D. insularis, L. virgata e S. halepense, por outro lado, a espécie de P. setosum não apresenta germinação em nenhuma das temperaturas avaliadas (25º 30º e 35ºC) não são adequadas para a sua germinação.
Resumo:
2008
Resumo:
2008
Resumo:
2016
Resumo:
Objetivou-se selecionar dentre 24 genótipos de sorgo os superiores para produção de silagem. O estudo foi conduzido no campo experimental da Embrapa Milho e Sorgo, município de Sete Lagoas, Estado de Minas Gerais. Utilizados 24 genótipos de sorgo forrageiro, 21 híbridos do cruzamento entre fêmeas graníferos e machos forrageiros (12F38019, 12F38006, 12F40006, 12F40005, 12F40019, 12F37016, 12F37005, 12F37043, 12F39006, 12F39005, 12F39019, 12F38005, 12F38007, 12F37007, 12F39007, 12F40007, 12F38014, 12F37014, 12F39014, 12F40014 e 12F38009) e três testemunhas: BRS 610, BRS 655 e Volumax. Estimada a produtividade por área, digestibilidade in vitro da matéria seca, características bromatológicas e fermentativas das silagens de sorgo. A digestibilidade in vitro da matéria seca, proteína indisponível em detergente neutro, fibra em detergente neutro corrigido para cinzas, proteína, fibra em detergente ácido, hemicelulose e lignina foram diferentes quanto aos genótipos testados. O pH e nitrogênio amoniacal das silagens também apresentaram diferenças entre genótipos. A maioria dos genótipos testados é favorável à produção de silagem, exceto o híbrido com maior teor de lignina 12F370014 e os híbridos 12F37007 e 12F370014, que apresentaram os maiores valores de FDNcp.
Resumo:
Objetivou-se avaliar as características agronômicas de genótipos de sorgo e o valor nutricional das silagens produzidas. Foram utilizados 15 genótipos de sorgo. O plantio foi realizado em blocos casualizados com três repetições por genótipo num total de 45 (quarenta e cinco) parcelas. Avaliaram-se as características agronômicas, nutricionais e qualidade da silagem. Houve diferença entre os genótipos para todas as características analisadas, com exceção dos teores de nitrogênio indisponível em detergente ácido (NIDA), proteína indisponível em detergente ácido (PIDA) e atividade de água (aw). Avaliando os parâmetros, com exceção dos genótipos 1016013, 1016025, 1016037, 1016039, Volumax, BRS 610, que apresentaram teor proteico abaixo de 7 %, os demais estão aptos a serem utilizados para a ensilagem, pois possuem um bom perfil de fermentação e digestibilidade in vitro da matéria seca; no entanto, o genótipo SF 15 é o mais favorável para a produção de silagem, devido à sua menor participação na fração de fibra em detergente neutro.
Resumo:
Increased tourist activity in coastal regions demands management strategies to reduce impacts on rocky shores. The highly populated coastal areas in southeastern Brazil are an example of degradation caused by development of industry and tourism. Among different shore impacts, trampling has been intensively studied, and may represent a significant source of stress for intertidal fauna. A randomised blocks design was applied to experimentally study the effects of two different trampling intensities on richness, diversity, density and biomass of the rocky shore fauna of Obuseiro beach, Guarujá, southeastern Brazil. Blocks were distributed in two portions of the intertidal zone, dominated respectively by Chthamalus bisinuatus (Cirripedia) and Isognomon bicolor (Bivalvia). Blocks were trampled over three months, simulating the vacation period in Brazil and were monitored for the following nine months. Results indicate that Chthamalus bisinuatus is vulnerable to trampling impacts. Richness, diversity and turn-over index tended to be higher in trampled plots four months after trampling ceased. In general, results agree with previous trampling studies, suggesting that even low intensities of trampling may cause some impact on intertidal communities. Management strategies should include isolation of sensitive areas, construction of boardwalks, visitor education and monitoring programmes. In Brazil, additional data obtained from experimental studies are necessary in order to achieve a better understanding of trampling impacts on rocky shore communities.
Resumo:
Oitenta e quatro espécies são registradas para o Estado do Maranhão: Prioninae (uma), Disteniinae (uma), Cerambycinae (49) e Lamiinae (33). O número total de espécies assinaladas para o Estado eleva-se a 367. Nove novas espécies são descritas em Cerambycinae: Chlorida inexpectata sp. nov. (Bothriospilini); Jupoata germana sp. nov. (Cerambycini); Eburodacrys separatus sp. nov. e Eburodacrys cincora sp. nov. (Eburiini); Ectenessa affinis sp. nov. (Ectenessini); Minibidion bicolor sp. nov. (Ibidionini, Tropidiina); Compsibidion maculatum sp. nov. e Compsibidion ytu sp. nov. (Ibidionini,Ibidionina); Ideratus beatus sp. nov. (Ideratini). Três espécies são descritas em Lamiinae: Aerenea gibba sp. nov. (Compsosomatini); Mimasyngenes barbozai sp. nov. (Desmiphorini); Cacostola exilis sp. nov. (Onciderini). Uma variação no colorido de Adesmus paradiana Galileo & Martins, 2004 é observada. Corrigenda de Piruana pulchra Martins et al., 2009 para Piruauna pulchra (Desmiphorini).