Variación del agua edáfica disponible para los cultivos en la Región Oriental de la Argentina

p.141-181

Disponibilidad actual de agua edáfica para los cultivos de granos en la Argentina

p.37-40

Quantification of all-ceramic crown margin surface profile from try-in to 1-week post-cementation

To use profilometry to assess the margin surface profile of all-ceramic crowns (ACC’s) at try-in and 1-week after cementation with dual-cured resin (DC, RelyX ARC, 3 M ESPE, St. Paul, MN, USA), self-adhesive dual-cured resin (SADC, RelyX Unicem, 3 M ESPE), light-cured resin (LC, RelyX Veneer, 3 M ESPE) or chemically cured resin-modified glass ionomer (RMGI, RelyX Luting Plus, 3 M ESPE) luting cement. Methods: Forty, sound, extracted, human, premolar teeth underwent a standardised preparation for ACC’s. IPS Empress (Ivoclar-Vivadent, Liechtenstein) crowns of standard dimensions were fabricated and 10 luted with each cement and stored in water for 7 days. Three groups of serial profiles were taken, the first of the tooth preparation, the second of the crown margins at try-in and lastly of the crown margins after cementation and 7 days water storage. Results: There were no significant differences in the crown margin surface profile between the four cement groups at try-in. The change in crown margin position between try-in and post-cementation was significantly greater for DC than for LC and RMGI. SADC was not significantly different to the other cements. There were no significant differences in the crown margin extensions between the four cement groups, however most of the IPS Empress ACC’s in this study were underextended but this was not statistically significant. Conclusions: IPS Empress ACC’s seated more fully with LC and RMGI than with DC cement

Testing the effectiveness of commonly-used site curing regimes

A range of seven test methods was used to assess the effectiveness of curing on C30 and C50 Portland cement concretes. Curing was by formwork retention, wrapping in wet hessian or wrapping in polythene for periods of between one and seven days. Specimens from each mix were also subjected to both air and water storage.

Climate Adaptation: The future of extra-care housing for the elderly in the United Kingdom.

This paper describes the result of a project to develop climate adaptation design strategies funded by the UK’s Technology Strategy Board. The aim of the project was to look at the effects of climate change in the distant future (2080) on a vulnerable group such as older people with special needs and see how architectural design strategies and technologies may be used today to help mitigate problems ahead caused by climate change.
Older people are the most vulnerable sector of society and are particularly at risk in extreme weather, either excess cold in winter or continual high temperatures in summer. In the UK it is predicted that average temperatures may rise by as much as 8 degrees in Summer by 2080 and there will be a 20% greater chance of extreme weather events. This will place extreme stress on the building stock which is designed for today’s mild maritime climate.
The project took a current proposal for an extra-care home for the elderly designed to 2010 regulations and developed a road map to 2080 using climate models developed by the UK Meteorological Office. This allowed the current design to be assessed using future climatic data, proposals for improvement of the scheme to be made within existing constraints and also a new scheme to be developed from first principals using this data, and projections of new technologies that will be available. By comparing these schemes, the approach allowed a reassessment of the initial scheme, and allowed a new design to be developed that offered a more flexible solution incorporating future retrofit which allows new renewable technologies for heating, cooling and water storage to be added at a later date.

Arbuscular mycorrhizal fungal communities are phylogenetically clustered at small scales

Next-generation sequencing technologies with markers covering the full Glomeromycota phylum were used to uncover phylogenetic community structure of arbuscular mycorrhizal fungi (AMF) associated with Festuca brevipila. The study system was a semi-arid grassland with high plant diversity and a steep environmental gradient in pH, C, N, P and soil water content. The AMF community in roots and rhizosphere soil were analyzed separately and consisted of 74 distinct operational taxonomic units (OTUs) in total. Community-level variance partitioning showed that the role of environmental factors in determining AM species composition was marginal when controlling for spatial autocorrelation at multiple scales. Instead, phylogenetic distance and spatial distance were major correlates of AMF communities: OTUs that were more closely related (and which therefore may have similar traits) were more likely to co-occur. This pattern was insensitive to phylogenetic sampling breadth. Given the minor effects of the environment, we propose that at small scales closely related AMF positively associate through biotic factors such as plant-AMF filtering and interactions within the soil biota.

Assessing the environmental fate of selected polybrominated diphenyl ethers in the region surrounding the Zhuoshui River of Taiwan based on an Equilibrium Constant fugacity model

Polybrominated diphenyl ethers (PBDEs) are a group of flame retardants that have been in use since the 1970s. They are included in the list of hazardous substances known as persistent organic pollutants (POPs) because they are extremely hazardous to the environment and human health. PBDEs have been extensively used in industry and manufacturing in Taiwan, thus its citizens are at high risk of exposure to these chemicals.
An assessment of the environmental fate of these compounds in the Zhuoshui river and Changhua County regions of western Taiwan, and also including the adjacent area of the Taiwan Strait, was conducted for three high risk congeners, BDE-47, -99 and -209, to obtain information regarding the partitioning, advection, transfer and long range transport potential of the PBDEs in order to identify the level of risk posed by the pollutants in this region.
The results indicate that large amounts of PBDEs presently reside in all model compartments – air, soil, water, and sediment – with particularly high levels found in air and especially in sediment. The high levels found in sediment, particularly for BDE-209, are significant, since there is the threat of these pollutants entering the food chain, either directly through benthic feeding, or through resuspension and subsequent feeding in the pelagic region of the water column which is a distinct possibility in the strong currents found within the Taiwan Strait. Another important result is that a substantial portion of emissions leave the model domain directly through advection, particularly for BDE-47 (58%) and BDE-209 (75%), thus posing a risk to adjacent communities.
Model results were generally in reasonable agreement with available measured concentrations. In air, model concentrations are in reasonably good agreement with available measured values. For both BDE-47 and -99, model concentrations are a factor of 2-3 higher and BDE-209 within the range of measured values. In soil, model results are somewhat less than measured values. In sediment, model results are at the high end of measured values.

Carbon distribution within the plant and rhizosphere in laboratory and field-grown Lolium perenne at different stages of development

Carbon distribution within perennial ryegrass was determined at different stages of plant development, by pulse-labelling laboratory and field-grown plants with ¹⁴C-CO₂. During the early stages of growth (23-51 days), C distribution of laboratory grown plants was not markedly affected by plant age, with 12.4-24% of net assimilated label lost into the soil as root-soil respiration. The percentage of net assimilate translocated below ground was 20-28% during this stage of growth. At 65 days, the percentage of the label translocated below ground decreased to 8.1% of the net assimilate, with a subsequent decrease in root-soil respiration to 3.9%. The ability of the plant to fix the label (expressed in MBq g^-1 oven dry total plant weight) decreased steadily as the plants aged. When the 30 day old plants were subjected to water stress (soil water potential -1.5 MPa) for 2 days before pulse-labelling, root-soil respiration of the pulse-label decreased compared with plants grown at field capacity. The distribution of a ¹⁴C pulse-label within perennial ryegrass grown under field conditions was found to be dependent on the age of the plants. For 4 week old plants, 67% of net assimilated label was translocated below ground, with 64.8% of this respired by the roots and soil. Less label was translocated below ground at subsequent pulse-labels from weeks 8 to 24. The proportion of label translocated below ground respired by the roots and soil also decreased. The investment of label in the plant shoots was found to be greater in field grown plants as compared to plants of the same age grown in a controlled, laboratory environment. © 1990.

Time-lapse monitoring of climate effects on earthworks using surface waves

The UK’s transportation network is supported by critical geotechnical assets (cuttings/embankments/dams) that require sustainable, cost-effective management, while maintaining an appropriate service level to meet social, economic, and environmental needs. Recent effects of extreme weather on these geotechnical assets have highlighted their vulnerability to climate variations. We have assessed the potential of surface wave data to portray the climate-related variations in mechanical properties of a clay-filled railway embankment. Seismic data were acquired bimonthly from July 2013 to November 2014 along the crest of a heritage railway embankment in southwest England. For each acquisition, the collected data were first processed to obtain a set of Rayleigh-wave dispersion and attenuation curves, referenced to the same spatial locations. These data were then analyzed to identify a coherent trend in their spatial and temporal variability. The relevance of the observed temporal variations was also verified with respect to the experimental data uncertainties. Finally, the surface wave dispersion data sets were inverted to reconstruct a time-lapse model of S-wave velocity for the embankment structure, using a least-squares laterally constrained inversion scheme. A key point of the inversion process was constituted by the estimation of a suitable initial model and the selection of adequate levels of spatial regularization. The initial model and the strength of spatial smoothing were then kept constant throughout the processing of all available data sets to ensure homogeneity of the procedure and comparability among the obtained VS sections. A continuous and coherent temporal pattern of surface wave data, and consequently of the reconstructed VS models, was identified. This pattern is related to the seasonal distribution of precipitation and soil water content measured on site.

Time-lapse monitoring of fluid induced geophysical property variations within an unstable earthwork using P-wave refraction

A significant portion of the UK’s transportation system relies on a network of geotechnical earthworks (cuttings and embankments) that were constructed more than 100 years ago, whose stability is affected by the change in precipitation patterns experienced over the past few decades. The vulnerability of these structures requires a reliable, cost- and time-effective monitoring of their geomechanical condition. We have assessed the potential application of P-wave refraction for tracking the seasonal variations of seismic properties within an aged clay-filled railway embankment, located in southwest England. Seismic data were acquired repeatedly along the crest of the earthwork at regular time intervals, for a total period of 16 months. P-wave first-break times were picked from all available recorded traces, to obtain a set of hodocrones referenced to the same spatial locations, for various dates along the surveyed period of time. Traveltimes extracted from each acquisition were then compared to track the pattern of their temporal variability. The relevance of such variations over time was compared with the data experimental uncertainty. The multiple set of hodocrones was subsequently inverted using a tomographic approach, to retrieve a time-lapse model of VPVP for the embankment structure. To directly compare the reconstructed VPVP sections, identical initial models and spatial regularization were used for the inversion of all available data sets. A consistent temporal trend for P-wave traveltimes, and consequently for the reconstructed VPVP models, was identified. This pattern could be related to the seasonal distribution of precipitation and soil-water content measured on site.

Response to salinity in young olive trees of three Iberian varieties

Soil salinization is a problem in the Mediterranean region. This paper reports a research on the response to salt in two year-old olive trees (Olea europaea L.) of three Iberian varieties: Arbequina, Cobrançosa and Galega Vulgar. Plants were grown in plastic pots containing approximately 9 Kg of a sandy granitic soil, on a greenhouse at the University of Évora since February 2010. The experiment went from February to April 2012. As a rule, plants were watered every other day alternating salt solution (0 mM, 80 mM or 200 mM NaCl) or tap water. After three months irrigation with the different NaCl solutions, soil electric conductivity and soil water content were significantly higher on salt-irrigated pots. Salt also decreased significantly stomatal conductance (gs) and mid-day leaf water potential (), Cobrançosa having in general higher gs and but lower SLA than the two other varieties. Chlorophyll content of leaves was not affected by salt after this three months exposure to NaCl but was significantly higher on Arbequina and lower on Cobrançosa. In general, hyperspectral reflectance indexes did not show significant correlations with salt irrigation, except for the Photochemical Reflectance Index (PRI) which was clearly lower on plants of all three varieties irrigated with salt. Interestingly, Cobrançosa showed frequently vegetation indexes different from the other two varieties.

Analytical methods to study fate of organic pollutants in environment

Environmental transport of pollutants comprises distinct processes such as volatilization, leaching and surface runoff. Sorption is one of the most important phenomena that affects leaching, and thus the fate of hydrophobic organic pollutants in soils and also control their distribution in the soil/water environment. The work developed focuses the optimization of analytical techniques for monitoring the sorption behaviour of organic pollutants, 17α- ethinylestradiol (EE2) and atrazine, and their fate in aqueous environment. Initially, the development of several analytical techniques, such as micellar electrokinetic chromatography, spectral deconvolution, using UV-Vis and fluorescence spectroscopy, and also enzyme linked immunosorbent assay was performed. Optimization, method performance and recovery tests are described and results discussed. Moreover, in order to evaluate the applicability of the previously optimized method, atrazine and EE2 sorption to soil samples was performed. The work developed provide several options, in terms of methodology to follow sorption of atrazine onto soils, however the choice depends on the laboratory conditions and on the analyst preferences. The advantages and disadvantages of each methodology should be evaluated first. The second part of this work consisted in the sorption behaviour study of those two different hydrophobic organic pollutants onto different soil samples. Soil organic matter chemical characterization, being essential to understand the binding mechanism responsible for the interactions, was made. The results of atrazine binding to organic matter pointed out that carboxyl units and aromaticrich organic matter are the most efficient binding agents for atrazine. EE2 adsorbs strongly to soil organic matter and is mainly stabilized by hydrophobic interactions, through aromatic nuclei face to face with surface and/or another EE2 molecule association. Farmyard manure soil contains higher aromatic and carboxyl units, indicating that this type of manure can be effectively used to minimize the residual toxicity of EE2 and atrazine present in soils, increasing the sorption and reducing leaching onto water resources. Since the final destination of organic pollutants can be ground, surface and/or waste water, atrazine and 17α-ethinylestradiol were quantified in several water samples.

The response of reworked aerosols to climate through estimation of inter-particle forces

This paper describes the first use of inter-particle force measurement in reworked aerosols to better understand the mechanics of dust deflation and its consequent ecological ramifications. Dust is likely to carry hydrocarbons and micro-organisms including human pathogens and cultured microbes and thereby is a threat to plants, animals and human. Present-day global aerosol emissions are substantially greater than in 1850; however, the projected influx rates are highly disputable. This uncertainty, in part, has roots in the lack of understanding of deflation mechanisms. A growing body of literature shows that whether carbon emission continues to increase, plant transpiration drops and soil water retention enhances, allowing more greenery to grow and less dust to flux. On the other hand, a small but important body of geochemistry literature shows that increasing emission and global temperature leads to extreme climates, decalcification of surface soils containing soluble carbonate polymorphs and hence a greater chance of deflation. The consistency of loosely packed reworked silt provides background data against which the resistance of dust’s bonding components (carbonates and water) can be compared. The use of macro-scale phenomenological approaches to measure dust consistency is trivial. Instead, consistency can be measured in terms of inter-particle stress state. This paper describes a semi-empirical parametrisation of the inter-particle cohesion forces in terms of the balance of contact-level forces at the instant of particle motion. We put forward the hypothesis that the loss of Ca2+-based pedogenic salts is responsible for much of the dust influx and surficial drying pays a less significant role.

Modelação hidrológica da bacia drenante da albufeira de Pracana

O uso inadequado do solo assim como práticas agrícolas incorrectas podem ter como consequência a contaminação dos recursos hídricos por poluição de origem difusa.Na perspectiva de identificar possíveis fontes de poluição, o objectivo deste trabalho é quantificar as cargas de nutrientes de origem natural, urbana e agrícola que chegam à albufeira de Pracana. Pretende-se efectuar a análise das alterações de carga resultantes de diferentes cenários do uso do solo, recorrendo à modelação matemática. Este conhecimento vai contribuir para a compreensão dos processos que dão origem à poluição existente na albufeira e os factores que condicionam o seu estado trófico.A ferramenta utilizada para a realização do estudo foi o modelo SWAT (Soil Water Assessment Tool, USDA Agricultural Research Service).

Hydrological modelling of Maranhão and Pracana Basins, a first approach

Modelling the hydrology of hydrographic basins has shown itself as a useful tool in environment management. The hydrological models can be used for multiple purposes: estimate runoff from sequences of rainfall, access stream water quality, quantify the diffuse pollution that reaches water masses such as estuaries, rivers and lakes, etc. This study has as final objective to simulate and analyse the flow, sediment transport and water quality as a function of landuse and soil type in the basins of Maranhão and Pracana. The modelling system used is SWAT, Soil Water Assessment Tool. In this first phase of the study the hydrodynamic calibration of the model was performed using measurements of average daily flows in five stations. The model compares well with the measurements; the annual average flows are similar and the majority of the measured flow peaks coincide with the model peaks.