The ring vaccination trial: a novel cluster randomised controlled trial design to evaluate vaccine efficacy and effectiveness during outbreaks, with special reference to Ebola

A World Health Organization expert meeting on Ebola vaccines proposed urgent safety and efficacy studies in response to the outbreak in West Africa. One approach to communicable disease control is ring vaccination of individuals at high risk of infection due to their social or geographical connection to a known case. This paper describes the protocol for a novel cluster randomised controlled trial design which uses ring vaccination.In the Ebola ça suffit ring vaccination trial, rings are randomised 1:1 to (a) immediate vaccination of eligible adults with single dose vaccination or (b) vaccination delayed by 21 days. Vaccine efficacy against disease is assessed in participants over equivalent periods from the day of randomisation. Secondary objectives include vaccine effectiveness at the level of the ring, and incidence of serious adverse events.Ring vaccination trials are adaptive, can be run until disease elimination, allow interim analysis, and can go dormant during inter-epidemic periods.

Long-term ticagrelor monotherapy versus standard dual antiplatelet therapy followed by aspirin monotherapy in patients undergoing biolimus-eluting stent implantation: rationale and design of the GLOBAL LEADERS trial

AIMS The GLOBAL LEADERS trial is a superiority study in patients undergoing percutaneous coronary intervention, with a uniform use of Biolimus A9-eluting stents (BES) and bivalirudin. GLOBAL LEADERS was designed to assess whether a 24-month antithrombotic regimen with ticagrelor and one month of acetylsalicylic acid (ASA), compared to conventional dual antiplatelet therapy (DAPT), improves outcomes. METHODS AND RESULTS Patients (n >16,000) are randomised (1:1 ratio) to ticagrelor 90 mg twice daily for 24 months plus ASA ≤100 mg for one month versus DAPT with either ticagrelor (acute coronary syndrome) or clopidogrel (stable coronary artery disease) for 12 months plus ASA ≤100 mg for 24 months. The primary outcome is a composite of all-cause mortality or non-fatal, new Q-wave myocardial infarction at 24 months. The key safety endpoint is investigator-reported class 3 or 5 bleeding according to the Bleeding Academic Research Consortium (BARC) definitions. Sensitivity analysis will be carried out to explore potential differences in outcome across geographic regions and according to specific angiographic and clinical risk estimates. CONCLUSIONS The GLOBAL LEADERS trial aims to assess the role of ticagrelor as a single antiplatelet agent after a short course of DAPT for the long-term prevention of cardiac adverse events, across a wide spectrum of patients, following BES implantation.

Feasibility study of a single-blind randomised controlled trial of an occupational therapy intervention.

BACKGROUND Several factors facilitate or hinder efficacy research in occupational therapy. Strategies are needed, therefore, to support the successful implementation of trials. AIM To assess the feasibility of conducting a randomised controlled trial (RCT). The main feasibility objectives of this study were to assess the process, resources, management, and scientific basis of a trial RCT. MATERIAL AND METHODS A total of 10 occupational therapists, between the ages of 30 and 55 (M 43.4; SD 8.3) with seven to 26 years' (M 14.3; SD 6.1) experience, participated in this study. Qualitative data collected included minutes of meetings, reports, and field notes. The data were analysed based on the principles of content analysis, using feasibility objectives as the main categories. RESULTS Data analysis revealed strengths in relation to retention and inclusion criteria of participants, the study protocol, study organisation, and the competence of researchers. Weaknesses were found related to recruitment, randomisation, data collection, time for training and communication, commitment, and design. CONCLUSION The findings indicated that there are several factors which had a considerable impact on the implementation of an RCT in practice. However, it was useful to assess methods and procedures of the trial RCT as a basis to refine research plans.

Design and Implementation of a Laparoscope Calibration Method for Augmented Reality Navigation

Intraoperative laparoscopic calibration remains a challenging task. In this work we present a new method and instrumentation for intraoperative camera calibration. Contrary to conventional calibration methods, the proposed technique allows intraoperative laparoscope calibration from single perspective observations, resulting in a standardized scheme for calibrating in a clinical scenario. Results show an average displacement error of 0.52 ± 0.19 mm, indicating sufficient accuracy for clinical use. Additionally, the proposed method is validated clinically by performing a calibration during the surgery.

A MANAGEMENT INFORMATION SYSTEM AND EVALUATION SCHEME FOR THE UNIVERSITY OF TEXAS EMPLOYEE ASSISTANCE PROGRAMS

Early Employee Assistance Programs (EAPs) had their origin in humanitarian motives, and there was little concern for their cost/benefit ratios; however, as some programs began accumulating data and analyzing it over time, even with single variables such as absenteeism, it became apparent that the humanitarian reasons for a program could be reinforced by cost savings particularly when the existence of the program was subject to justification.^ Today there is general agreement that cost/benefit analyses of EAPs are desirable, but the specific models for such analyses, particularly those making use of sophisticated but simple computer based data management systems, are few.^ The purpose of this research and development project was to develop a method, a design, and a prototype for gathering managing and presenting information about EAPS. This scheme provides information retrieval and analyses relevant to such aspects of EAP operations as: (1) EAP personnel activities, (2) Supervisory training effectiveness, (3) Client population demographics, (4) Assessment and Referral Effectiveness, (5) Treatment network efficacy, (6) Economic worth of the EAP.^ This scheme has been implemented and made operational at The University of Texas Employee Assistance Programs for more than three years.^ Application of the scheme in the various programs has defined certain variables which remained necessary in all programs. Depending on the degree of aggressiveness for data acquisition maintained by program personnel, other program specific variables are also defined. ^

Recognizing a Single-Issue Spatial Election

A single-issue spatial election is a voter preference profile derived from an arrangement of candidates and voters on a line, with each voter preferring the nearer of each pair of candidates. We provide a polynomial-time algorithm that determines whether a given preference profile is a single-issue spatial election and, if so, constructs such an election. This result also has preference representation and mechanism design applications.

The design and evaluation of a 2D dose verification system for intensity modulated radiotherapy

The usage of intensity modulated radiotherapy (IMRT) treatments necessitates a significant amount of patient-specific quality assurance (QA). This research has investigated the precision and accuracy of Kodak EDR2 film measurements for IMRT verifications, the use of comparisons between 2D dose calculations and measurements to improve treatment plan beam models, and the dosimetric impact of delivery errors. New measurement techniques and software were developed and used clinically at M. D. Anderson Cancer Center. The software implemented two new dose comparison parameters, the 2D normalized agreement test (NAT) and the scalar NAT index. A single-film calibration technique using multileaf collimator (MLC) delivery was developed. EDR2 film's optical density response was found to be sensitive to several factors: radiation time, length of time between exposure and processing, and phantom material. Precision of EDR2 film measurements was found to be better than 1%. For IMRT verification, EDR2 film measurements agreed with ion chamber results to 2%/2mm accuracy for single-beam fluence map verifications and to 5%/2mm for transverse plane measurements of complete plan dose distributions. The same system was used to quantitatively optimize the radiation field offset and MLC transmission beam modeling parameters for Varian MLCs. While scalar dose comparison metrics can work well for optimization purposes, the influence of external parameters on the dose discrepancies must be minimized. The ability of 2D verifications to detect delivery errors was tested with simulated data. The dosimetric characteristics of delivery errors were compared to patient-specific clinical IMRT verifications. For the clinical verifications, the NAT index and percent of pixels failing the gamma index were exponentially distributed and dependent upon the measurement phantom but not the treatment site. Delivery errors affecting all beams in the treatment plan were flagged by the NAT index, although delivery errors impacting only one beam could not be differentiated from routine clinical verification discrepancies. Clinical use of this system will flag outliers, allow physicists to examine their causes, and perhaps improve the level of agreement between radiation dose distribution measurements and calculations. The principles used to design and evaluate this system are extensible to future multidimensional dose measurements and comparisons. ^

Design of mixed-longitudinal studies

Cross-sectional designs, longitudinal designs in which a single cohort is followed over time, and mixed-longitudinal designs in which several cohorts are followed for a shorter period are compared by their precision, potential for bias due to age, time and cohort effects, and feasibility. Mixed longitudinal studies have two advantages over longitudinal studies: isolation of time and age effects and shorter completion time. Though the advantages of mixed-longitudinal studies are clear, choosing an optimal design is difficult, especially given the number of possible combinations of the number of cohorts and number of overlapping intervals between cohorts. The purpose of this paper is to determine the optimal design for detecting differences in group growth rates.^ The type of mixed-longitudinal study appropriate for modeling both individual and group growth rates is called a "multiple-longitudinal" design. A multiple-longitudinal study typically requires uniform or simultaneous entry of subjects, who are each observed till the end of the study.^ While recommendations for designing pure-longitudinal studies have been made by Schlesselman (1973b), Lefant (1990) and Helms (1991), design recommendations for multiple-longitudinal studies have never been published. It is shown that by using power analyses to determine the minimum number of occasions per cohort and minimum number of overlapping occasions between cohorts, in conjunction with a cost model, an optimal multiple-longitudinal design can be determined. An example of systolic blood pressure values for cohorts of males and cohorts of females, ages 8 to 18 years, is given. ^

Specialized managed care for children with cystic fibrosis: Resource use patterns and rate design for a high cost Medicaid population

Objective. This research study had two goals: (1) to describe resource consumption patterns for Medi-Cal children with cystic fibrosis, and (2) to explore the feasibility from a rate design perspective of developing specialized managed care plans for such a special needs population.^ Background. Children with special health care needs (CSHN) comprise about 2% of the California Medicaid pediatric population. CSHN have rare but serious health problems, such as cystic fibrosis. Medicaid programs, including Medi-Cal, are enrolling more and more beneficiaries in managed care to control costs. CSHN, however, do not fit the wellness model underlying most managed care plans. Child health advocates believe that both efficiency and quality will suffer if CSHN are removed from regionalized special care centers and scattered among general purpose plans. They believe that CSHN should be "carved out" from enrollment in general plans. One alternative is the Specialized Managed Care Plan, tailored for CSHN.^ Methods. The study population consisted of children under age 21 with CF who were eligible for Medi-Cal and California Children's Services program (CCS) during 1991. Health Care Financing Administration (HCFA) Medicaid Tape-to-Tape data were analyzed as part of a California Children's Hospital Association (CCHA) project.^ Results. Mean Medi-Cal expenditures per month enrolled were $2,302 for 457 CF children, compared to about \$1,270 for all 47,000 CCS special needs children and roughly $60 for almost 2.6 million ``regular needs'' children. For CF children, inpatient care (80\%) and outpatient drugs (9\%) were the major cost drivers, with {\it all\/} outpatient visits comprising only 2\% of expenditures. About one-third of CF children were eligible due to AFDC (Aid to Families with Dependent Children). Age group explained about 17\% of all expenditure variation. Regression analysis was used to select the best capitation rate structure (rate cells by age and eligibility group). Sensitivity analysis estimated moderate financial risk for a statewide plan (360 enrollees), but severe risk for single county implementation due to small numbers of children.^ Conclusions. Study results support the carve out of CSHN due to unique expenditure patterns. The Specialized Managed Care Plan concept appears feasible from a rate design perspective given sufficient enrollees. ^

Design, Calibration, and Evaluation of Depth-of-Interaction-Capable PET Detector Modules

High-resolution, small-bore PET systems suffer from a tradeoff between system sensitivity, and image quality degradation. In these systems long crystals allow mispositioning of the line of response due to parallax error and this mispositioning causes resolution blurring, but long crystals are necessary for high system sensitivity. One means to allow long crystals without introducing parallax errors is to determine the depth of interaction (DOI) of the gamma ray interaction within the detector module. While DOI has been investigated previously, newly available solid state photomultipliers (SSPMs) well-suited to PET applications and allow new modules for investigation. Depth of interaction in full modules is a relatively new field, and so even if high performance DOI capable modules were available, the appropriate means to characterize and calibrate the modules are not. This work presents an investigation of DOI capable arrays and techniques for characterizing and calibrating those modules. The methods introduced here accurately and reliably characterize and calibrate energy, timing, and event interaction positioning. Additionally presented is a characterization of the spatial resolution of DOI capable modules and a measurement of DOI effects for different angles between detector modules. These arrays have been built into a prototype PET system that delivers better than 2.0 mm resolution with a single-sided-stopping-power in excess of 95% for 511 keV g's. The noise properties of SSPMs scale with the active area of the detector face, and so the best signal-to-noise ratio is possible with parallel readout of each SSPM photodetector pixel rather than multiplexing signals together. This work additionally investigates several algorithms for improving timing performance using timing information from multiple SSPM pixels when light is distributed among several photodetectors.

Adaptive clinical trial design for targeted therapy development

The development of targeted therapy involve many challenges. Our study will address some of the key issues involved in biomarker identification and clinical trial design. In our study, we propose two biomarker selection methods, and then apply them in two different clinical trial designs for targeted therapy development. In particular, we propose a Bayesian two-step lasso procedure for biomarker selection in the proportional hazards model in Chapter 2. In the first step of this strategy, we use the Bayesian group lasso to identify the important marker groups, wherein each group contains the main effect of a single marker and its interactions with treatments. In the second step, we zoom in to select each individual marker and the interactions between markers and treatments in order to identify prognostic or predictive markers using the Bayesian adaptive lasso. In Chapter 3, we propose a Bayesian two-stage adaptive design for targeted therapy development while implementing the variable selection method given in Chapter 2. In Chapter 4, we proposed an alternate frequentist adaptive randomization strategy for situations where a large number of biomarkers need to be incorporated in the study design. We also propose a new adaptive randomization rule, which takes into account the variations associated with the point estimates of survival times. In all of our designs, we seek to identify the key markers that are either prognostic or predictive with respect to treatment. We are going to use extensive simulation to evaluate the operating characteristics of our methods.^

Design, synthesis and cellular and molecular pharmacology of 2$\sp\prime$-bromo-4$\sp\prime$-epidaunorubicin (WP401): A novel non-cross-resistant anthracycline antibiotic with the intrinsic ability to circumvent P -glycoprotein-mediated drug resistance

We designed and synthesized a novel daunorubicin (DNR) analogue that effectively circumvents P-glycoprotein (P-gp)-mediated drug resistance. The fully protected carbohydrate intermediate 1,2-dibromoacosamine was prepared from acosamine and effectively coupled to daunomycinone in high yield. Deprotection under alkaline conditions yielded 2$\sp\prime$-bromo-4$\sp\prime$-epidaunorubicin (WP401). The in vitro cytotoxicity and cellular and molecular pharmacology of WP401 were compared with those of DNR in a panel of wild-type cell lines (KB-3-1, P388S, and HL60S) and their multidrug-resistant (MDR) counterparts (KB-V1, P388/DOX, and HL60/DOX). Fluorescent spectrophotometry, flow cytometry, and confocal laser scanning microscopy were used to measure intracellular accumulation, retention, and subcellular distribution of these agents. All MDR cell lines exhibited reduced DNR uptake that was restored, upon incubation with either verapamil (VER) or cyclosporin A (CSA), to the level found in sensitive cell lines. In contrast, the uptake of WP401 was essentially the same in the absence or presence of VER or CSA in all tested cell lines. The in vitro cytotoxicity of WP401 was similar to that of DNR in the sensitive cell lines but significantly higher in resistant cell lines (resistance index (RI) of 2-6 for WP401 vs 75-85 for DNR). To ascertain whether drug-mediated cytotoxicity and retention were accompanied by DNA strand breaks, DNA single- and double-strand breaks were assessed by alkaline elution. High levels of such breaks were obtained using 0.1-2 $\mu$g/mL of WP401 in both sensitive and resistant cells. In contrast, DNR caused strand breaks only in sensitive cells and not much in resistant cells. We also compared drug-induced DNA fragmentation similar to that induced by DNR. However, in P-gp-positive cells, WP401 induced 2- to 5-fold more DNA fragmentation than DNR. This increased DNA strand breakage by WP401 was correlated with its increased uptake and cytotoxicity in these cell lines. Overall these results indicate that WP401 is more cytotoxic than DNR in MDR cells and that this phenomenon might be related to the reduced basicity of the amino group and increased lipophilicity of WP401. ^

Limits of the Southern Ocean

The knowledge about processes concerning perception and understanding is of paramount importance for designing means of communication like maps and charts. This is especially the case, if one does not want to lose sight of the map-user and if map-design is to be orientated along the map-users needs and preferences in order to improve the cartographic product's usability. A scientific approach to visualization can help to achieve useable results. The insights achieved by such an approach can lead to modes of visualization that are superior to those, which have seemingly proved their value in praxis - so-called "bestpractices" -, concerning their utility and efficiency. This thesis shows this by using the example of visualizing the limits of bodies of waters in the Southern Ocean. After making some introductorily remarks on the chosen mode of problem-solution in chapter one, which simultaneously illustrate the flow of work while working on the problem, in chapter two the relevant information concerning the drawing of limits in the Southern Ocean is outlined. Chapter 3 builds the theoretical framework, which is a multidisciplinary approach to representation. This theoretical framework is based on "How Maps Work" by the American Cartographer MacEachren (1995/2004). His "scientific approach to visualization" is amended and adjusted by the knowledge gained from recent findings of the social sciences where necessary. So, the approach suggested in this thesis represents a synergy of psychology, sociology, semiotics, linguistics, communication theory and cartography. It follows the tradition of interdisciplinary research getting over the boundaries of a single scientific subject. The achieved holistic approach can help to improve the usability of cartographic products. It illustrates on the one hand those processes taking place while perceiving and recognizing cartographic information - so-called bottom-up-processes. On the other hand it illuminates the processes which happen during understanding this information in so-called top-down-processes. Bottom-up- and top-down-processes are interdependent and inseparably interrelated and therefore cannot be understood without each other. Regarding aspects of usability the approach suggested in this thesis strongly focuses on the map-user. This is the reason why the phenomenon of communication gains more weight than in MacEachren's map-centered approach. Because of this, in chapter 4 a holistic approach to communication is developed. This approach makes clear that only the map-user can evaluate the usability of a cartographic product. Only if he can extract the information relevant for him from the cartographical product, it is really useable. The concept of communication is well suited to conceive that. In case of the visualization of limits of bodies of water in the Southern Ocean, which is not complex enough to illustrate all results of the theoretical considerations, it is suggested to visualize the limits with red lines. This suggestion deviates from the commonly used mode of visualization. So, this thesis shows how theory is able to ameliorate praxis. Chapter 5 leads back to the task of fixing limits of the bodies of water in the area of concern. A convention by the International Hydrographic Organization (IHO) states that those limits should be drawn by using meridians, parallels, rhumb lines and bathymetric data. Based on the available bathymetric data both a representation and a process model are calculated, which should support the drawing of the limits. The quality of both models, which depends on the quality of the bathymetric data at hand, leads to the decision that the representation model is better suited to support the drawing of limits.

Current Mode with RMS Voltage and Offset Control Loops for a Single-Phase Aircraft Inverter Suitable for Parallel and 3-Phase Operation Modes

Rms voltage regulation may be an attractive possibility for controlling power inverters. Combined with a Hall Effect sensor for current control, it keeps its parallel operation capability while increasing its noise immunity, which may lead to a reduction of the Total Harmonic Distortion (THD). Besides, as voltage regulation is designed in DC, a simple PI regulator can provide accurate voltage tracking. Nevertheless, this approach does not lack drawbacks. Its narrow voltage bandwidth makes transients last longer and it increases the voltage THD when feeding non-linear loads, such as rectifying stages. On the other hand, the implementation can fall into offset voltage error. Furthermore, the information of the output voltage phase is hidden for the control as well, making the synchronization of a 3-phase setup not trivial. This paper explains the concept, design and implementation of the whole control scheme, in an on board inverter able to run in parallel and within a 3-phase setup. Special attention is paid to solve the problems foreseen at implementation level: a third analog loop accounts for the offset level is added and a digital algorithm guarantees 3-phase voltage synchronization.

EMI filter design of a three-phase buck-type rectifier for aircraft applications

An EMI filter for a three-phase buck-type medium power pulse-width modulation rectifier is designed. This filter considers differential mode noise and complies with MIL-STD- 461E for the frequency range of 10kHz to 10MHz. In industrial applications, the frequency range of the standard starts at 150kHz and the designer typically uses a switching frequency of 28kHz because the fifth harmonic is out of the range. This approach is not valid for aircraft applications. In order to design the switching frequency in aircraft applications, the power losses in the semiconductors and the weight of the reactive components should be considered. The proposed design is based on a harmonic analysis of the rectifier input current and an analytical study of the input filter. The classical industrial design does not consider the inductive effect in the filter design because the grid frequency is 50/60Hz. However, in the aircraft applications, the grid frequency is 400Hz and the inductance cannot be neglected. The proposed design considers the inductance and the capacitance effect of the filter in order to obtain unitary power factor at full power. In the optimization process, several filters are designed for different switching frequencies of the converter. In addition, designs from single to five stages are considered. The power losses of the converter plus the EMI filter are estimated at these switching frequencies. Considering overall losses and minimal filter volume, the optimal switching frequency is selected