IL-2 AND IFN-g, BUT NOT IL-4 SECRETION BY PERIPHERAL BLOOD MONONUCLEAR CELLS (PBMC) ARE RELATED TO CD4+ T CELLS AND CLINICAL STATUS IN BRAZILIAN HIV-1-INFECTED SUBJECTS

It has been reported that production of IL-2 and IFN-g, known as T-helper type 1 cytokines, by peripheral mononuclear cells (PBMC) decreases with progression of HIV infection. In contrast, IL-4 and IL-10 production, Th2 cytokine profile, increases with HIV disease progression. PBMC were evaluated from 55 HIV-infected subjects from Divisão de Imunologia, Hospital das Clínicas, Faculdade de Medicina da Universidade de São Paulo, to "in vitro" cytokines production after 24 hours of stimulation with PHA. Low levels of IL-4 production in both HIV- infected patients and normal subjects, were detected. The patients with CD4+ T cell counts <200 showed a significant decrease of IL-2 and IFN-g production compared to controls. Patients with higher counts of CD4+ T cells (either between 200-500 or >500 cells/mm3) also showed decreased production of IL-2 that was not statistically significant. There was a correlation between IL-2 and IFN-g release with CD4+ T cells counts. HIV-1-infected individuals with CD4+ T cells >500 cells/mm3 showed increased levels of IL-2 and IFN-g, than individuals with CD4+ T cells <500 cells/mm3. In conclusion, we observed a decline of IL-2 and IFN-g production at advanced HIV disease. IL-4 production was not affected during HIV infection. Taken together, these findings suggest that the cytokine profile might be influenced by the HIV infection rather than the cause of disease progression.

Paralisia cerebral na Região de Lisboa e Vale do Tejo : factores de risco : caracterização multidimensional : inclusão escolar

RESUMO - A Paralisia Cerebral (PC) deve ser olhada como uma patologia do neurodesenvolvimento: a infância é um período de actividade exploratória por essência, a restrição motora condiciona as várias áreas do desenvolvimento. Contextos, apoios, oportunidades e experiências de vida serão determinantes no desenvolvimento de todo o seu potencial. Objectivos/finalidade: Identificar, descrever, comparar e analisar factores de risco associados à PC, sua caracterização multidimensional e integração escolar aos 5 e 10 anos. Procurou‐se contribuir para a sua prevenção primária e secundária, e obter dados para planeamento e implementação dos programas de apoio. Métodos: Adoptou‐se a abordagem do Programa Nacional de Vigilância da Paralisia Cerebral (PNVPC) e da Surveillance of Cerebral Palsy in Europe (SCPE). Analisaram‐se factores de risco, competências funcionais, défices associados, severidade e integração escolar de duas populações de Lisboa e Vale do Tejo, (nascimento 1996/1997‐2001/2002 e prevalência aos 5 e 10 anos). Descreveram‐se os dados, efectuaram‐se correlações, aplicaram‐se testes de independência e compararam‐se com dados dos nadovivos, dados nacionais e europeus. Analisaram‐se os factores que influenciaram a integração escolar através de métodos de regressão logística. Resultados/Conclusões/Recomendações: 1,65‰ e 1,57‰ dos nadovivos desenvolveram PC; a prevalência aos 5 anos foi de 1,7‰ e de 1,48‰; 5,9% e 7,9% faleceram antes dos 5 anos. Em 2001/2002 verificou‐se aumento de: PC espástica bilateral‐2/3membros, prematuridade, causa pos‐neonatal, níveis funcionais ligeiros e graves; percentil estaturo‐ponderal <3 (5‐anos). Diminuição de: disquinésia, anóxia e alguns défices associados. Destacaram‐se as associação: prematuridade e PC espástica bilateral‐ 2/3membros; nascer de termo e anóxia, disquinésia, primíparas, défices associados e severidade; infecção pré‐natal e QI<50, epilepsia e severidade; causa pos‐neonatal e PC espástica bilateral‐4membros e múltiplos défices. Aos 5 anos, as variáveis explicativas para a não inclusão escolar foram: QI<50 e epilepsia; uma elevada percentagem de crianças com PC moderada/grave encontrava‐se integrada; 75% das que se encontravam desintegradas mantiveram‐se nesta situação aos 10. Nesta idade, as variáveis explicativas para a não inclusão escolar foram: QI<50 e motricidade fina; 35,1% encontrava‐se fora do ensino regular; 4,5%, embora em idade de escolaridade obrigatória, não frequentavam qualquer estabelecimento escolar. Informação sistematizada, abrangente, objectiva, simples e acessível, sobre novos casos de PC, factores de risco, prevalência em idades‐chave e caracterização multidimensional constitui uma ferramenta clínica e epidemiológica, que deve sustentar as políticas de saúde, educacionais e sociais, contribuindo para a permanência destas crianças no ensino regular, trazendo às crianças e famílias o suporte que as encorajem e sustentem nestes processos. ABSTRACT ------- Cerebral Palsy (CP) must be recognized as a neurodevelopmental disorder: childhood is, on its nature, a period for exploring the environment and therefore motor deficit interferes with all developmental areas. The context, support, opportunities and life experiences are determinants for the development of his full potential. Objective/Aim: To identify, describe, compare and analyze CP risk factors the multidimensional characterization and school integration levels at the age of 5 and 10 years. We aim to contribute to CP primary and secondary prevention and provide information for service planning and implementation of support programs. Methods: The approach of National Cerebral Palsy Surveillance Programme (NCPSP) and Surveillance of Cerebral Palsy in Europe (SCPE) were used. For two groups of children from Lisboa e Vale do Tejo region, birth data 1996/1997‐2001/2002 and prevalence at 5 and 10 years, were analyzed: CP risk factors, functional ability, associated impairments, severity and school integration settings. Data collected was described, analyzed using correlations, applied tests of independence and compared with new born data, national data and european data. To analyze the factors related to school inclusive settings, logistic regression was appealed. Results/Conclusions/Recommendations: 1,65% and 1,57‰ of the new‐born alive developed CP. The prevalence at 5 years was 1,7‰ and 1,48‰ 5,9% and 7,9% died before their 5th birthday. Bilateral spastic CP 2/3limb, preterm birth, cases of post‐neonatal origin, mild and sever functional impairment; weight and height percentile <3 at 5 years old Increased in 2001. Decreased dyskinetic CP, anoxia and some additional imparments. Were identified among other the association between prematurity and spastic bilateral CP‐2/3 members; born at term and anoxia, dyskinetic CP, first child, associated impairments and severity; prenatal infection and IQ<50, epilepsy and severity; post‐neonatal cause and spastic bilateral CP‐4 members and associated impairments. At 5‐years‐old the more explanatory variables for not be in a school inclusive settings were IQ<50 and epilepsy, a high percentage of children with moderate/severe CP was attending regular school, but most children who were out of inclusive settings at 5 years continue on this situations at 10‐years‐old. At this age the more explanatory variables for not be in a school inclusive settings were: IQ<50 and upper limb function; 35,1% were out of regular school; 4,5%, even in compulsory school age, are out of school. Standardized comprehensive, objective, simple and accessible information about CP new cases, risk factors, prevalence in the key‐age and children multidimensional characterization constitutes a clinical and epidemiological tool that should sustain health, educational and social policy. This would support the continuity of these children in regular schools, encouraging g them and their families in these processes.

Une langue étragère, un ordinateur, une image: c'est simple comme bonjour!

Este artigo surgiu na sequência de um atelier “Une langue étrangère, un ordinateur, une image: c’est simple comme bonjour!”, desenvolvido no âmbito do XXI Congresso da Associação Portuguesa dos Professores de Francês, Images et imaginaires pour agir. Teve como propósito divulgar, experimentar e refletir sobre recursos digitais que podem dar um bom contributo ao processo de ensino e aprendizagem do Francês Língua Estrangeira (FLE). Evidencia-se o poder da imagem na construção do conhecimento, desafiando a criatividade e novos modos de ensinar a aprender. Verificou-se que os professores se interessaram pelas ferramentas digitais e evidenciaram a sua importância e a sua aplicabilidade nos contextos educativos. Neste sentido, o artigo divulga ferramentas informáticas focadas no desenvolvimento da oralidade/leitura/escrita do francês língua estrangeira, refere boas práticas de utilização em contexto de sala de aula, constituindo uma contribuição para a renovação da escola.

Comparação dos ensaios DCB e TDCB para determinação da tenacidade em tração de adesivos estruturais

O constante desenvolvimento observado nas ligações adesivas, em conjunto com as melhorias verificadas nas características dos adesivos, estão a ser traduzidos, de uma certa forma, num aumento das aplicações das ligações adesivas, assim como na variedade de aplicações. No âmbito da previsão de resistência de juntas adesivas, dois métodos de grande relevância são a Mecânica da Fratura e os Modelos de Dano Coesivo. Os Modelos de Dano Coesivo permitem a simulação da iniciação e propagação do dano, recorrendo ao Método Dos Elementos Finitos. No que concerne à Mecânica da Fratura, a previsão de resistência é geralmente feita através de uma análise energética. Independentemente da forma como é obtida, a taxa crítica de libertação de energia de deformação à tração (GIc) dos adesivos é um dos parâmetros mais importantes para a previsão da resistência das juntas. Dois dos ensaios mais utilizados são o Double Cantilever Beam (DCB) e o Tapered Double Cantilever Beam (TDCB). Este trabalho pretende determinar e comparar o valor de GIc em juntas adesivas pelos ensaios DCB e TDCB. São utilizados três tipos de adesivos com diferentes graus de ductilidade. No ensaio DCB os métodos utilizados para a determinação de GIc são: Compliance-Based Beam Method (CBBM), Corrected Beam Theory (CBT) e Compliance Calibration Method (CCM). Os métodos utilizados no ensaio TDCB são: Simple Beam Theory (SBT), Corrected Beam Theory (CBT) e Compliance Calibration Method (CCM). Os resultados obtidos apresentam concordância entre os vários métodos de cada ensaio. A discrepância de resultados é superior quando comparados os dois tipos de ensaios.

Liver histology in co-infection of hepatitis C virus (HCV) and Hepatitis G virus (HGV)

As little is known about liver histology in the co-infection of hepatitis C virus (HCV) and hepatitis G virus (HGV), HGV RNA was investigated in 46 blood donors with hepatitis C, 22 of them with liver biopsy: co-infection HCV / HGV (n = 6) and HCV isolated infection (n = 16). Besides staging and grading of inflammation at portal, peri-portal and lobular areas (Brazilian Consensus), the fibrosis progression index was also calculated. All patients had no symptoms or signs of liver disease and prevalence of HGV / HCV co-infection was 15.2%. Most patients had mild liver disease and fibrosis progression index, calculated only in patients with known duration of infection, was 0.110 for co-infection and 0.130 for isolated HCV infection, characterizing these patients as "slow fibrosers". No statistical differences could be found between the groups, although a lesser degree of inflammation was always present in co-infection. In conclusion co-infection HCV / HGV does not induce a more aggressive liver disease, supporting the hypothesis that HGV is not pathogenic.

High prevalence of GB Virus C/Hepatitis G Virus RNA among Brazilian blood donors

The aim of this study was to investigate the presence of the Hepatitis G Virus on a population of blood donors from São Paulo, Brazil and to evaluate its association to sociodemographic variables. Two RT-PCR systems targeting the putative 5'NCR and NS3 regions were employed and the former has shown a higher sensitivity. The observed prevalence of HGV-RNA on 545 blood donors was 9.7% (CI 95% 7.4;12.5). Statistical analysis depicted an association with race/ethnicity, black and mulatto donors being more frequently infected; and also with years of education, less educated donors presenting higher prevalences. No association was observed with other sociodemographic parameters as age, gender, place of birth and of residence. DNA sequencing of nine randomly chosen isolates demonstrated the presence of genotypes 1, 2 and 3 among our population but clustering of these Brazilian isolates was not detected upon phylogenetic analysis.

Disposable immunosensor using a simple method for oriented antibody immobilization for label-free real-time detection of an oxidative stress biomarker implicated in cancer diseases

This work proposes a novel approach for a suitable orientation of antibodies (Ab) on an immunosensing platform, applied here to the determination of 8-hydroxy-2′-deoxyguanosine (8OHdG), a biomarker of oxidative stress that has been associated to chronic diseases, such as cancer. The anti-8OHdG was bound to an amine modified gold support through its Fc region after activation of its carboxylic functions. Non-oriented approaches of Ab binding to the platform were tested in parallel, in order to show that the presented methodology favored Ab/Ag affinity and immunodetection of the antigen. The immunosensor design was evaluated by quartz-crystal microbalance with dissipation, atomic force microscopy, electrochemical impedance spectroscopy (EIS) and square-wave voltammetry. EIS was also a suitable technique to follow the analytical behavior of the device against 8OHdG. The affinity binding between 8OHdG and the antibody immobilized in the gold modified platform increased the charge transfer resistance across the electrochemical set-up. The observed behavior was linear from 0.02 to 7.0 ng/mL of 8OHdG concentrations. The interference from glucose, urea and creatinine was found negligible. An attempt of application to synthetic samples was also successfully conducted. Overall, the presented approach enabled the production of suitably oriented Abs over a gold platform by means of a much simpler process than other oriented-Ab binding approaches described in the literature, as far as we know, and was successful in terms of analytical features and sample application.

Disposable immunosensor with simple antibody orientation for label-free real-time detection of a cancer biomarker

This work proposes a novel approach for a suitable orientation of antibodies (Ab) on an immunosensing platform, applied here to the determination of 8-hydroxy-2’-deoxyguanosine (8OHdG), a biomarker of oxidative stress that has been associated to chronic diseases, such as cancer. The Anti-8OHdG was bound to an amine modified gold support through its Fc region after activation of its carboxylic functions. Non-oriented approaches of Ab binding to the platform were tested in parallel, in order to show that the presented proposal favored Ab/Ag affinity. The immunosensor design was evaluated by Quartz-Crystal microbalance with Dissipation, Atomic Force Microscopy, Electrochemical Impedance Spectroscopy (EIS) and Square-Wave Voltammetry. EIS was also a suitable technique to follow the analytical behavior of the device against 8OHdG. The affinity binding between 8OHdG and the antibody immobilized in the gold modified platform increased the charged transfer resistance across the electrochemical sep-up. The observed behavior was linear from 0.02 to 7.0 ng/mL of 8OHdG concentrations. The interference from Glucose, Urea and Creatinine was found negligible. An attempt of application to synthetic samples was also successfully conducted. Overall, the presented approach enabled the production of suitably oriented Abs over a gold platform by means of a much simpler process than other oriented-Ab binding approaches described in the literature, as far as we know, and was successful in terms of analytical features and sample application.

Specific label-free and real-time detection of oxidized low density lipoprotein (oxLDL) using an immunosensor with three monoclonal antibodies

Increased levels of plasma oxLDL, which is the oxidized fraction of Low Density Lipoprotein (LDL), are associated with atherosclerosis, an inflammatory disease, and the subsequent development of severe cardiovascular diseases that are today a major cause of death in modern countries. It is therefore important to find a reliable and fast assay to determine oxLDL in serum. A new immunosensor employing three monoclonal antibodies (mAbs) against oxLDL is proposed in this work as a quick and effective way to monitor oxLDL. The oxLDL was first employed to produce anti-oxLDL monoclonal antibodies by hybridoma cells that were previously obtained. The immunosensor was set-up by selfassembling cysteamine (Cyst) on a gold (Au) layer (4 mm diameter) of a disposable screen-printed electrode. Three mAbs were allowed to react with N-hydroxysuccinimide (NHS) and ethyl(dimethylaminopropyl)carbodiimide (EDAC), and subsequently incubated in the Au/Cys. Albumin from bovine serum (BSA) was immobilized further to ensure that other molecules apart from oxLDL could not bind to the electrode surface. All steps were followed by various characterization techniques such as electrochemical impedance spectroscopy (EIS) and square wave voltammetry (SWV). The analytical operation of the immunosensor was obtained by incubating the sensing layer of the device in oxLDL for 15 minutes, prior to EIS and SWV. This was done by using standard oxLDL solutions prepared in foetal calf serum, in order to simulate patient's plasma with circulating oxLDL. A sensitive response was observed from 0.5 to 18.0 mg mL 1 . The device was successfully applied to determine the oxLDL fraction in real serum, without prior dilution or necessary chemical treatment. The use of multiple monoclonal antibodies on a biosensing platform seemed to be a successful approach to produce a specific response towards a complex multi-analyte target, correlating well with the level of oxLDL within atherosclerosis disease, in a simple, fast and cheap way.

Evaluation of an in-house specific immunoglobulin G (IgG) avidity ELISA for distinguishing recent primary from long-term human cytomegalovirus (HCMV) infection

This article describes the standardization and evaluation of an in-house specific IgG avidity ELISA for distinguishing recent primary from long-term human cytomegalovirus (HCMV) infection. The test was standardized with the commercial kit ETI-CYTOK G Plus (Sorin Biomedica, Italy) using 8 M urea in phosphate-buffered saline to dissociate low-avidity antibodies after the antigen-antibody interaction. The performance of the in-house assay was compared to that of the commercial automated VIDAS CMV IgG avidity test (bioMérieux, France). Forty-nine sera, 24 from patients with a recent primary HCMV infection and 25 from patients with a long-term HCMV infection and a sustained persistence of specific IgM antibodies, were tested. Similar results were obtained with the two avidity methods. All 24 sera from patients with recently acquired infection had avidity indices compatible with acute HCMV infection by the VIDAS method, whereas with the in-house method, one serum sample had an equivocal result. In the 25 sera from patients with long-term infection, identical results were obtained with the two methods, with only one serum sample having an incompatible value. These findings suggest that our in-house avidity test could be a potentially useful tool for the immunodiagnosis of HCMV infection.

Novel LTCC-potentiometric microfluidic device for biparametric analysis of organic compounds carrying plastic antibodies as ionophores: Application to sulfamethoxazole and trimethoprim

Monitoring organic environmental contaminants is of crucial importance to ensure public health. This requires simple, portable and robust devices to carry out on-site analysis. For this purpose, a low-temperature co-fired ceramics (LTCC) microfluidic potentiometric device (LTCC/μPOT) was developed for the first time for an organic compound: sulfamethoxazole (SMX). Sensory materials relied on newly designed plastic antibodies. Sol–gel, self-assembling monolayer and molecular-imprinting techniques were merged for this purpose. Silica beads were amine-modified and linked to SMX via glutaraldehyde modification. Condensation polymerization was conducted around SMX to fill the vacant spaces. SMX was removed after, leaving behind imprinted sites of complementary shape. The obtained particles were used as ionophores in plasticized PVC membranes. The most suitable membrane composition was selected in steady-state assays. Its suitability to flow analysis was verified in flow-injection studies with regular tubular electrodes. The LTCC/μPOT device integrated a bidimensional mixer, an embedded reference electrode based on Ag/AgCl and an Ag-based contact screen-printed under a micromachined cavity of 600 μm depth. The sensing membranes were deposited over this contact and acted as indicating electrodes. Under optimum conditions, the SMX sensor displayed slopes of about −58.7 mV/decade in a range from 12.7 to 250 μg/mL, providing a detection limit of 3.85 μg/mL and a sampling throughput of 36 samples/h with a reagent consumption of 3.3 mL per sample. The system was adjusted later to multiple analyte detection by including a second potentiometric cell on the LTCC/μPOT device. No additional reference electrode was required. This concept was applied to Trimethoprim (TMP), always administered concomitantly with sulphonamide drugs, and tested in fish-farming waters. The biparametric microanalyzer displayed Nernstian behaviour, with average slopes −54.7 (SMX) and +57.8 (TMP) mV/decade. To demonstrate the microanalyzer capabilities for real applications, it was successfully applied to single and simultaneous determination of SMX and TMP in aquaculture waters.

Disposable solid state probe for optical screening of chlorpromazine

We are presenting a simple, low-cost and rapid solid-state optical probe for screening chlorpromazine (CPZ) in aquacultures. The method exploits the colourimetric reaction between CPZ and Fe(III) ion that occurs at a solid/liquid interface, the solid layer consisting of ferric iron entrapped in a layer of plasticized PVC. If solutions containing CPZ are dropped onto such a layer, a colour change occurs from light yellow to dark pink or even light blue, depending on the concentration of CPZ. Visual inspection enables the concentration of CPZ to be estimated. The resulting colouration was also monitored by digital image collection for a more accurate quantification. The three coordinates of the hue, saturation and lightness system were obtained by standard image processing along with mathematical data treatment. The parameters affecting colour were assessed and optimized. Studies were conducted by visible spectrophotometry and digital image acquisition, respectively. The response of the optimized probe towards the concentration of CPZ was tested for several mathematical transformations of the colour coordinates, and a linear relation was found for the sum of hue and luminosity. The limit of detection is 50 μM (corresponding to about 16 μg per mL). The probe enables quick screening for CPZ in real water samples with prior sample treatment.

A simple and cheaper in house varicella zoster virus antibody indirect ELISA

We have developed a cheaper an simple in house indirect ELISA that uses the live attenuated VZV vaccine as a coating antigen. The alternative ELISA had an agreement of 94% when compared with a commercial VZV ELISA kit. Moreover, our ELISA proved to be more reliable than the kit when assessing true negative samples. By adding a standard serum, we were able to produce results in international units per millilitre. Also, the addition of an extra step with 8M urea allowed the assessment of VZV IgG avidity without excessive costs. The cost per sample to test VZV IgG was 2.7 times cheaper with our ELISA, allowing the testing of many samples without the burden of production of VZV antigen in the laboratory.

A framework for using real data with distributed low cost sensors

Currently, due to the widespread use of computers and the internet, students are trading libraries for the World Wide Web and laboratories with simulation programs. In most courses, simulators are made available to students and can be used to proof theoretical results or to test a developing hardware/product. Although this is an interesting solution: low cost, easy and fast way to perform some courses work, it has indeed major disadvantages. As everything is currently being done with/in a computer, the students are loosing the “feel” of the real values of the magnitudes. For instance in engineering studies, and mainly in the first years, students need to learn electronics, algorithmic, mathematics and physics. All of these areas can use numerical analysis software, simulation software or spreadsheets and in the majority of the cases data used is either simulated or random numbers, but real data could be used instead. For example, if a course uses numerical analysis software and needs a dataset, the students can learn to manipulate arrays. Also, when using the spreadsheets to build graphics, instead of using a random table, students could use a real dataset based, for instance, in the room temperature and its variation across the day. In this work we present a framework which uses a simple interface allowing it to be used by different courses where the computers are the teaching/learning process in order to give a more realistic feeling to students by using real data. A framework is proposed based on a set of low cost sensors for different physical magnitudes, e.g. temperature, light, wind speed, which are connected to a central server, that the students have access with an Ethernet protocol or are connected directly to the student computer/laptop. These sensors use the communication ports available such as: serial ports, parallel ports, Ethernet or Universal Serial Bus (USB). Since a central server is used, the students are encouraged to use sensor values results in their different courses and consequently in different types of software such as: numerical analysis tools, spreadsheets or simply inside any programming language when a dataset is needed. In order to do this, small pieces of hardware were developed containing at least one sensor using different types of computer communication. As long as the sensors are attached in a server connected to the internet, these tools can also be shared between different schools. This allows sensors that aren't available in a determined school to be used by getting the values from other places that are sharing them. Another remark is that students in the more advanced years and (theoretically) more know how, can use the courses that have some affinities with electronic development to build new sensor pieces and expand the framework further. The final solution provided is very interesting, low cost, simple to develop, allowing flexibility of resources by using the same materials in several courses bringing real world data into the students computer works.