Analysis of Semi-solid Processing for Metal Matrix Composite Synthesis Using Factorial Design

The main goal in this work is to conduct a quantitative analysis of the mechanical stir casting process for obtaining particulate metal matrix composites. A combined route of stirring at semi-solid state followed by stirring at liquid state is proposed. A fractional factorial design was developed to investigate the influence and interactions of factors as: time, rotation, initial fraction and particle size, on the incorporated fraction. The best incorporations were obtained with all factors at high levels, as well as that very long stirring periods have no strong influence being particle size and rotation the most important factors on the incorporated fraction. Particle wetting occurs during stirring at semisolid state, highlighting the importance of the interactions between particles and the alloy globularized phase. The role of the alloying element Mg as a wettability-promoting agent is discussed. The shear forces resulting from the stirring system is emphasized and understood as the effect of rotation itself added to the propeller blade geometry.

Orientation dependence of stored energy of cold work in semi-processed electrical steels after temper rolling

Microhardness measurements were carried out in a low carbon lamination steel after 6% of temper rolling, in order to evaluate local variations of work hardening as a function of crystallographic orientation. EBSD (electron back scattered diffraction) was used to determine grain orientations with respect to individual rolling planes and rolling directions. Hardness was shown to increase with the local Taylor factor. TEM observations and a well-known dislocation hardening model were used to confirm the equivalence between hardness values and the stored energy of cold work. A definite correlation between stored energy and Taylor factors could therefore be established, being more consistent than previous data reported in the literature. The improvement was thought to be related to the rather small plastic deformation, during which Taylor factors could be considered to remain constant. (c) 2006 Elsevier B.V. All rights reserved.

Evaluation of strip rolling directly from the semi-solid state

defect metal alloy strip when thixorolling directly from the semi-solid state. To facilitate the study lead/tin alloys were chosen for their relatively low operating temperature. The objective is to extrapolate these findings to the higher temperature aluminium, alloys. Three alloys (70%Pb30%Sn, 60%Pb-40%Sn, 50%Pb-50%wtSn) were used particularly to study the influence of the solidification interval. The equipment consists of a two roll mill arranged as an upper and lower roller, where both rollers are driven at a controlled speed. The lower roller is fed with semi solid alloy through a ceramic nozzle attached to the lower end of a cooling slope. Several types of nozzle and their position at the roller were tested. This produced different solidifications and consequently different finished strip. The alloys were first cast and then poured onto the cooling slope through a tundish in order to create a continuous laminar flow of slurry and uniformity of metal strip quality. The pouring was tested at different positions along the slope. The cooling slope was coated with colloidal graphite to promote a smooth slurry flow and avoid the problem of adherence and premature solidification. The metallic slurry not only cools along the slope but is also initially super-cooled to a mush by the lower roller whilst at room temperatures, thus enabling thixorolling. It was also found that the nozzle position could be adjusted to enable the upper roller to also contribute to the solidification of the metallic slurry. However the rollers and the cooling slope naturally heat up. Temperature distribution in these zones was analysed by means of three thermocouples positioned along the cooling slope and a fourth in the base of the semi solid pool within the nozzle. The objective being to design an optimum pouring and cooling system. The formed strip was cooled down to room temperature with a shower of water. Microstructures of the thixorolling process were analysed. The differences in solidification conditions resulted in differing qualities of finished strip and corresponding defect types, all of which are a serious quality issue for the rolled product.

Superando a aridez do semi-árido: encontros entre saúde mental e saúde da família na formação de médicos no alto sertão paraibano

A atenção primária à saúde é um importante cenário para o cuidado em saúde mental por suas características e pelo trabalho no território contribuir para a superação do modelo manicomial de atenção. Esta pesquisa partiu do questionamento sobre como acontece a atenção em saúde mental na atenção básica nas unidades em que se desenvolve a Residência de Medicina de Família e Comunidade em um município do sertão paraibano. Objetivou investigar as demandas de saúde mental e práticas de cuidado no contexto de ESF e da RMFC do município de Cajazeiras a partir do discurso dos profissionais ali inseridos e discutir estratégias de qualificação do cuidado em saúde mental nessa realidade. Utilizou-se abordagem qualitativa em que foram realizados grupos focais envolvendo profissionais de duas equipes da ESF e uma equipe de NASF. Os dados produzidos nos grupos foram analisados a partir do referencial da análise do discurso de inspiração foucaultiana. Como resultados evidenciou-se que os profissionais percebem a demanda em saúde mental na atenção básica principalmente na forma de sofrimento psíquico inespecífico e transtornos mentais graves. A atenção a essas pessoas não consegue superar a medicalização que é identificada por esses profissionais. A prática asilar persiste como alternativa para os casos de transtornos mentais graves, sendo limitada a incorporação do paradigma da desinstitucionalização como referencial para a prática profissional. Além disso, a relação com a rede de saúde encontra vários limites destacando-se a dificuldade de produção de continuidade e integralidade do cuidado. A partir disto, analisa-se a formação médica e sua capacidade de garantir o cuidado integral na atenção às demandas de saúde mental. No campo da pesquisa, dois modelos de formação se encontram. Os residentes participantes ou graduaram-se em Cuba ou em escola médica brasileira orientada pelas Diretrizes Curriculares Nacionais. Percebe-se então que a graduação, ao incorporar questões relativas à integralidade do cuidado, não é suficiente para gerar bons profissionais para o SUS. Considera-se necessário somar às mudanças na graduação a perspectiva da Educação Permanente em Saúde no mundo do trabalho, o envolvimento dos profissionais com a transformação das práticas de atenção à saúde e a construção da perspectiva da integralidade e da atenção psicossocial por dentro da Residência de Medicina de Família e Comunidade como importantes estratégias para a formação de médicos generalistas aptos para a atenção às demandas de saúde mental

Um algoritmo genético especializado aplicado ao planejamento da expansão do sistema de transmissão com alocação de dispositivos de compensação série

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

O Desenvolvimento local sustentável no semi-árido nordestino: um estudo de caso na comunidade de mirandas, Caraúbas/RN

Brazil s semi-arid region is an immense territory characterized by a mosaic of natural environments and human settlements. Inside this multifaceted framework, there are problems that are specific to the region (the water resources situation, for example) while others are more universal (such as the inequality between men and women). The circumstances that give rise to these problems are complex and require a holistic view so that our understanding can go beyond the simple concept that this is a problem region . The semi-arid must be perceived as a viable area in need of a new analysis, taking into account its successes, limitations, challenges and the strategic public policy framework that guarantees its sustainable development. The dissertation analyzes, from a sustainable local development perspective, the experience of the Northeastern Brazil Groundwater Project (PROASNE), carried out from 2001 to 2003, in partnership with the Waters and Sewers Company of Rio Grande do Norte (CAERN) in the rural community of Mirandas, municipality of Caraúbas/RN, situated in the middle of the northeastern Brazil semi-arid region

O desempenho terminológico dos descritores em Ciência da Informação do Vocabulário Controlado do SIBi/USP nos processos de indexação manual, automática e semi-automática

The terminological performance of the descriptors representing the Information Science domain in the SIBI/USP Controlled Vocabulary was evaluated in manual, automatic and semi-automatic indexing processes. It can be concluded that, in order to have a better performance (i.e., to adequately represent the content of the corpus), current Information Science descriptors of the SIBi/USP Controlled Vocabulary must be extended and put into context by means of terminological definitions so that information needs of users are fulfilled.

Aplicação do algoritmo de otimização por colônia de formigas sobre o problema do passeio do robô seletivo

This work seeks to propose and evaluate a change to the Ant Colony Optimization based on the results of experiments performed on the problem of Selective Ride Robot (PRS, a new problem, also proposed in this paper. Four metaheuristics are implemented, GRASP, VNS and two versions of Ant Colony Optimization, and their results are analyzed by running the algorithms over 32 instances created during this work. The metaheuristics also have their results compared to an exact approach. The results show that the algorithm implemented using the GRASP metaheuristic show good results. The version of the multicolony ant colony algorithm, proposed and evaluated in this work, shows the best results

Otimização em braquiterapia de alta taxa de dose com algoritmo transgenético

Este trabalho aborda o problema de otimização em braquiterapia de alta taxa de dose no tratamento de pacientes com câncer, com vistas à definição do conjunto de tempos de parada. A técnica de solução adotada foi a Transgenética Computacional apoiada pelo método L-BFGS. O algoritmo desenvolvido foi empregado para gerar soluções não denominadas cujas distribuições de dose fossem capazes de eiminar o câncer e ao mesmo tempo preservar as regiões normais

Geração de processos WS-BPEL com base em um algoritmo de reescrita de regras

Web services are computational solutions designed according to the principles of Service Oriented Computing. Web services can be built upon pre-existing services available on the Internet by using composition languages. We propose a method to generate WS-BPEL processes from abstract specifications provided with high-level control-flow information. The proposed method allows the composition designer to concentrate on high-level specifi- cations, in order to increase productivity and generate specifications that are independent of specific web services. We consider service orchestrations, that is compositions where a central process coordinates all the operations of the application. The process of generating compositions is based on a rule rewriting algorithm, which has been extended to support basic control-flow information.We created a prototype of the extended refinement method and performed experiments over simple case studies

Novos métodos determinísticos para gerar centros iniciais dos grupos no algoritmo fuzzy C-Means e variantes

Data clustering is applied to various fields such as data mining, image processing and pattern recognition technique. Clustering algorithms splits a data set into clusters such that elements within the same cluster have a high degree of similarity, while elements belonging to different clusters have a high degree of dissimilarity. The Fuzzy C-Means Algorithm (FCM) is a fuzzy clustering algorithm most used and discussed in the literature. The performance of the FCM is strongly affected by the selection of the initial centers of the clusters. Therefore, the choice of a good set of initial cluster centers is very important for the performance of the algorithm. However, in FCM, the choice of initial centers is made randomly, making it difficult to find a good set. This paper proposes three new methods to obtain initial cluster centers, deterministically, the FCM algorithm, and can also be used in variants of the FCM. In this work these initialization methods were applied in variant ckMeans.With the proposed methods, we intend to obtain a set of initial centers which are close to the real cluster centers. With these new approaches startup if you want to reduce the number of iterations to converge these algorithms and processing time without affecting the quality of the cluster or even improve the quality in some cases. Accordingly, cluster validation indices were used to measure the quality of the clusters obtained by the modified FCM and ckMeans algorithms with the proposed initialization methods when applied to various data sets

Algoritmo treansgenético na solução do problema do Caixeiro Viajante

The Traveling Purchaser Problem is a variant of the Traveling Salesman Problem, where there is a set of markets and a set of products. Each product is available on a subset of markets and its unit cost depends on the market where it is available. The objective is to buy all the products, departing and returning to a domicile, at the least possible cost defined as the summation of the weights of the edges in the tour and the cost paid to acquire the products. A Transgenetic Algorithm, an evolutionary algorithm with basis on endosymbiosis, is applied to the Capacited and Uncapacited versions of this problem. Evolution in Transgenetic Algorithms is simulated with the interaction and information sharing between populations of individuals from distinct species. The computational results show that this is a very effective approach for the TPP regarding solution quality and runtime. Seventeen and nine new best results are presented for instances of the capacited and uncapacited versions, respectively

Um método semi-automatizado para elicitação de requisitos de acessibilidade Web

In the context of Software Engineering, web accessibility is gaining more room, establishing itself as an important quality attribute. This fact is due to initiatives of institutions such as the W3C (World Wide Web Consortium) and the introduction of norms and laws such as Section 508 that underlie the importance of developing accessible Web sites and applications. Despite these improvements, the lack of web accessibility is still a persistent problem, and could be related to the moment or phase in which this requirement is solved within the development process. From the moment when Web accessibility is generally regarded as a programming problem or treated when the application is already developed entirely. Thus, consider accessibility already during activities of analysis and requirements specification shows itself a strategy to facilitate project progress, avoiding rework in advanced phases of software development because of possible errors, or omissions in the elicitation. The objective of this research is to develop a method and a tool to support requirements elicitation of web accessibility. The strategy for the requirements elicitation of this method is grounded by the Goal-Oriented approach NFR Framework and the use of catalogs NFRs, created based on the guidelines contained in WCAG 2.0 (Web Content Accessibility Guideline) proposed by W3C

Qualidade de água como tema para a socialização do conhecimento científico em região semi-árida brasileira

During the dry and rainy periods, in the Piranhas-Assu river hydrographic basin, variations in bacterioplankton and trophic state indexes were studied in the lotic and lentic environments. The means of total bacterial density wavered in the order of 107 organisms. mL-1 and they were higher in the rainy period. Cocci bacteria were numerically predominant in all sampling points, influencing the total abundance of bacterioplankton. Total bacterial biomass varied from 659 to 1997,3 µgC.L-1 due to the high values of filaments cellular volume. Total phosphorus amounted 108 µg.L-1 and it had a positive correlation with chlorophyll a (r = 0,94; p < 0,05) during dry period, when these variables presented higher concentrations. There wasn t a high spatial variation. The low transparency of water and the phosphorus and chlorophyll concentrations indicated eutrophic or hipereutrophic levels in studied points of reservoir. These variables, associated with high density and biomass values found, alert to the necessity of a constant monitoring of the semi-arid aquatic ecosystems, where the quality of water is affected by dry occurrence

Usos e qualidade da água em região semi-árida do nordeste brasileiro: percepção ambiental de professores e alunos

Density and biomass of bacterioplankton in parts of the Marechal Dutra reservoir were studied in periods of dry and rainy season. The averages of the total bacterial densities oscillated in the order of 107 organisms/ mL of sample. The cocci cells were numerically predominant, influencing considerably the total abundance of the bacterioplankton. The total bacterial biomass, was considered raised and varied from 2.431,82 to 2.739,01 μgC.L-1, in function of the high values of biovolume of the filaments forms, and showed no marked spacial fluctuation. These high values of density and biomass alert for the necessity of a frequent monitoring of aquatic ecosystems of semi-arid region, where the quality of the water is affected by the occurrence of extensive dry periods, influencing considerably the quality of life of its population