Diferentes esquemas de indução para transplante renal com doador vivo

Abstract Introduction: Indications for induction therapy is not consensual in living donors. Objective: The objective of this study was compare no induction with thymoglobulin and basiliximab induction in the incidence of acute rejection in kidney transplantation with living donor. Methods: We select all cases of renal transplantation with living donor performed in Hospital das Clínicas de Botucatu da UNESP during the period of January 2010 to December 2013. The group was divided by the type of medication used for induction. Results: A total of 90 patients were evaluated. There were no differences in baseline characteristics of age and underlying disease. The rate of biopsy-proven acute rejection was higher in the group without induction (42.9%) compared to basiliximab group (20%) and Thymoglobulin (16.7%), p = 0.04. The rejection by compatibility shows that the identical had the lower rejection rate (10%). The haploidentical group without induction had the highest rejection rates (53.3%). In all distinct group the rejection rates were similar with basiliximab or Thymoglobulin, p = NS. The use of induction therapy was associated independently with a lower risk of rejection (OR = 0.32 CI: 0.11 to 0.93, p = 0.036). There were no differences in renal function at 6 months and patient survival and graft in the three groups. Discussion: The haploidentical patients without induction were those with higher rates of acute rejection. The group of patients induced with Thymoglobulin had a higher immunological risk, however showed low rates of rejection. Conclusion: The use of induction therapy resulted in lower rates of rejection in transplantation with living donor.

Respostas de populações autógamas de Avena fátua à seleção por baixas doses de diclofop-methyl e glyphosate

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Seleção, avaliação e utilização de uma levedura personalizada para a produção de etanol

Pós-graduação em Microbiologia - IBILCE

Estratégias de condução de populações segregantes de soja portadoras do gene RR e seleção por meio de análises uni e multivariada

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV

Seleção de famílias e progênies de irmãos completos de cana-de-açúcar para atributos tecnológicos e de produção pelo método de REML/BLUP

The objective of this study was to assess families and highlight the superior progenies of sugarcane originating from 38 biparental crosses for the following attributes: tons of cane per hectare (TCH), tons of biomass per hectare (TBIOH), brix (% cane juice), fiber content, purity, pol and total recoverable sugar (TRS). The data were analyzed by mixed model REML / BLUP in the REML (Restricted Maximum Likelihood) allowed us to estimate genetic parameters and BLUP (best linear unbiased prediction) to predict the additive and genotypic values. The best family for the attributes TCH and TBIOH was 41, whose parents are cultivars IACSP022019 x CTC9. In individual selection for TCH, the plant number 3 of Block 2, the crossing 78, showed the best results. To TBIOH the plant number 33, Block 1, family 41, showed the best results. Families 40, 41, 43, 68, 69, 79, 91, 92 and 147, were higher for the variables brix, pol, purity, and ATR, where as 85 families, 147, 148, 149, 161, 163, 177, 178, 179, and 183 were higher for fiber. The family 147 whose parents are IACSP042286 x IACSP963055, showed three progenies ranked among the top ten for both brix, and for fiber, which identifies the combination as a potential source of progenies for bioenergy production.

Estimativas dos parâmetros genéticos para seleção de árvores de Eucalyptus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Capacidade de combinação para seleção de genótipos de milho

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito da utilização de diferentes critérios de controle de qualidade dos genótipos em estudos de associação e seleção genômica ampla

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fatores biomecânicos relevantes na seleção dos grampos em próteses parciais removíveis com extremo livre: estudo clínico

The free-end removable partial dentures (RPD) shows a complicated and peculiar biomechanical behavior that impose high occlusion forces to the abutment teeth. By this way, the aim of this study was to evaluate the several factors that influence the clasps indication to free-end RPD. It was analysed 84 designed and planned study models of 71 patients, involving 130 clasps near-by a free-end; followed by clinical and radiographical informations. It was observed that bar clasps (“T”, “Tmod”, “i”) were used in 88.46% of abutment teeth. In the others (11.55%), it was used simple, combinated or ring circumferential clasps, and MDL. In abutment teeth with high equator line the “i” clasps were predominant (48.48%). The “Tmod” clasps were predominant in abutment teeth with low equator line (50%) or in middle third (51.35%) and “T” clasps were predominant in inclined equators with mesio-buccal (56.52%) or disto-buccal (66.66%) retention. In the posterior abutment teeth, it was prevalent the distal rest (63.52%) and embracing to the adjacent tooth. Some others factors like long clinical crown (5.38%), wrong position of abutment teeth (4.61%), aesthetics (3.07%), retention in alveolar ridge (2.3%), fragility of abutment teeth (1.53%), short clinical crown (0.76%) and short space to the clasp (0.76%) influenced directly during the clasps selection. Factors like mobility of abutment teeth, height of muscular insertions, depth of buccal fornix and antagonist arch acted like secondary factors. After the informations analysis it may be concluded that the bar clasps with distal rest and embracing to the adjacent tooth were the most indicated to free-end RPD

Avaliação dos fatores críticos para a seleção e aplicação clínica dos pinos de fibra: relato de caso cliínico

Teeth that have lost much of their coronal tooth structure need intraradical devices to achieve a desired retention of the restorative material, restoring aesthetics and function to the patient. For this purpose, various types of intracanal posts have been studied, of wich the fiber posts have been highlighted with its increasing use in the dental market. The purpose of this study was to present a clinical case of using fiberglass post. As well as critically analyze the published works and points of controversy described by different authors related to factors such as different protocols cementation, surface treatments pins, fracture toughness and compression, the possibility of microleakage, diameter and length of the pin, and the various materials used in conjunction with the intracanal retainers. Thus, we concluded that fiber posts showed as an excellent alternative for anterior teeth, since have least 2 mm of tooth remaining.

Considerações relevantes na seleção de dentes artificiais

Nowadays the search for aesthetic in removable dentures is considered a success clinical factor. Besides, both the selection of artificial denture teeth and the characterization of dentures have been based on the facial harmony and cultural factors. But these factors change over time. Therefore, the present study aimed to discuss the selection of artificial denture teeth in relation to patient’s variables such as face shape, skin color, hair color, eye color, age and gender. Moreover, artificial denture teeth’ color, shape and size were presented.

Controle do crescimento e da seleção folicular por fatores locais e sistêmicos na espécie bovina

The regulation of ovarian activity is an integrated process involving extraovarian signals and intrafollicular factors. In such process, gonadotropins have an important role, but not always crucial. The initiation of primordial follicle growth and the early stages of folliculogenesis can occur without gonadotropins, however FSH may affect the rate of preantral follicle growth. On the other hand, the antral follicle development from 1 to 4 mm in diameter is completely gonadotropin-dependent in bovine, and the alternation of dependency from FSH to LH may be part of the mechanism involved in follicular selection. Locally produced growth factors, such as the IGF system, work in association with gonadotropins throughout the follicular growth and can influence follicular selection. Thus, the integration of these extraovarian signals and intrafollicular factors seems to determine whether a follicle will continue to develop or go atretic. This review focuses on the interaction between gonadotropins and intrafollicular factors in follicular development and selection in cattle.

Densidade, seleção de micro-habitat e distribuição de Phylloscartes eximius (Aves: Tyrannidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Área de vida e seleção de habitat por sabiás (Turdus leucomelas, Turdidae) em ambiente urbanizado

Pós-graduação em Ciências Biológicas (Zoologia) - IBRC

Metodologia para seleção e implantação das Tecnologias da Informação e Comunicação no ensino da educação básica

Pós-graduação em Matemática em Rede Nacional - IBILCE