Solid-State bipolar Marx modulator modeling

A mathematical model that simulates the operation of a solid-state bipolar Marx modulator topology, including the influence of parasitic capacitances is presented and discussed as a tool to analyze the circuit behavior and to assist the design engineer to select the semiconductor components and to enhance the operating performance. Simulations show good agreement with experimental results, considering a four stage circuit assembled with 1200 V isolated gate bipolar transistors and diodes, operating at 1000 V dc input voltage and 1-kHz frequency, giving 4 kV and 10-mu s output pulses into several resistive loads. Results show that parasitic capacitances between Marx cells to ground can significantly load the solid-state switches, adding new operating circuit conditions.

Fractional central pattern generators for bipedal locomotion

Locomotion has been a major research issue in the last few years. Many models for the locomotion rhythms of quadrupeds, hexapods, bipeds and other animals have been proposed. This study has also been extended to the control of rhythmic movements of adaptive legged robots. In this paper, we consider a fractional version of a central pattern generator (CPG) model for locomotion in bipeds. A fractional derivative D α f(x), with α non-integer, is a generalization of the concept of an integer derivative, where α=1. The integer CPG model has been proposed by Golubitsky, Stewart, Buono and Collins, and studied later by Pinto and Golubitsky. It is a network of four coupled identical oscillators which has dihedral symmetry. We study parameter regions where periodic solutions, identified with legs’ rhythms in bipeds, occur, for 0<α≤1. We find that the amplitude and the period of the periodic solutions, identified with biped rhythms, increase as α varies from near 0 to values close to unity.

Solving colored nonograms

Trabalho apresentado no âmbito do Mestrado em Engenharia Informática, como requisito parcial para obtenção do grau de Mestre em Engenharia Informática

Transformador diferencial de variação linear: condicionamento de sinal e desmodulação síncrona

Dissertação para obtenção do grau de Mestre em Engenharia Eletrotécnica Ramo de Automação e eletrónica Industrial

Projeto de um conversor eletrónico para utilização num sistema eólico de produção de energia

Dissertação para obtenção do grau de Mestre em Engenharia Electrotécnica no Ramo de Automação e Electrónica Industrial

Estudo e parametrização das principais proteções elétricas de geradores e transformadores de grupo de uma central hidroelétrica

Nesta dissertação, é realizado o estudo e parametrização dos relés de proteção para geradores e transformadores de grupo de uma central hidroelétrica. É efetuada, também, uma breve abordagem à manutenção e ensaio dos respetivos relés. No fornecimento de Energia Elétrica aos seus consumidores, deve-se ter em consideração todo o funcionamento do Sistema Elétrico de Energia (SEE). Como os SEE são projetados para gerar energia elétrica para responder à carga, é necessário garantir que este assegure o fornecimento de energia elétrica com elevados padrões de qualidade e continuidade de serviço. Assim, as proteções revelam, um papel fulcral na garantia da continuidade de serviço. As proteções são constituídas por equipamentos de proteção nomeadamente, relés de proteção, que são dispositivos cuja função é retirar de serviço os equipamentos em defeito, permitindo que o restante sistema elétrico seja alimentado. Os sistemas de proteção são, assim, de extrema importância, já que têm como função, assegurar, garantir e eliminar anomalias evitando danos nos equipamentos e nos utilizadores/consumidores.

Estudo da produção e aplicação de cola animal

Com as crescentes exigências do mercado e fortes restrições a nível ambiental, as indústrias modernas tendem a progredir no sentido da eficiência, sustentabilidade e rentabilidade dos seus processos produtivos. Sendo a indústria dos curtumes uma forte geradora de resíduos sólidos, é indispensável criar alternativas à valorização desses mesmos resíduos de forma a cumprir todos os requisitos ambientais. Este trabalho remete à reutilização dos resíduos, provenientes da divisão da pele em tripa após operação de descarna, com o intuito de se desenvolver um novo bio-produto apto para ser utilizado noutros sectores industriais. Os resíduos em causa consistem maioritariamente em colagéneo, que apresenta um enorme potencial para se produzir cola animal. Desta forma, este trabalho tem como objectivo principal avaliar a utilização deste tipo de resíduo na produção de um novo bio-produto, cola animal, e testar a sua aplicabilidade técnica e funcional. Com a realização deste trabalho, mostrou-se ser possível produzir um produto, a partir de retalhos da indústria de curtumes, com um perfil de carácter positivo no que diz respeito à viabilidade técnica e funcional da utilização da cola animal como eventual alternativa a um ligante, para formulações de colas de base aquosa para a indústria gráfica e do papel.

An engine for generating XSLT from examples

XSLT is a powerful and widely used language for transforming XML documents. However its power and complexity can be overwhelming for novice or infrequent users, many of which simply give up on using this language. On the other hand, many XSLT programs of practical use are simple enough to be automatically inferred from examples of source and target documents. An inferred XSLT program is seldom adequate for production usage but can be used as a skeleton of the final program, or at least as scaffolding in the process of coding it. It should be noted that the authors do not claim that XSLT programs, in general, can be inferred from examples. The aim of Vishnu - the XSLT generator engine described in this paper – is to produce XSLT programs for processing documents similar to the given examples and with enough readability to be easily understood by a programmer not familiar with the language. The architecture of Vishnu is composed by a graphical editor and a programming engine. In this paper we focus on the editor as a GWT web application where the programmer loads and edits document examples and pairs their content using graphical primitives. The programming engine receives the data collected by the editor and produces an XSLT program.

Learning management systems in higher education

The use of Laptops and the Internet has produced the technological conditions for instructors and students can take advantage from the diversity of online information, communication, collaboration and sharing with others. The integration of Internet services in the teaching practices can be responsible for thematic, social and digital improvement for the agents involved. There are many benefits when we use a Learning Management Systems (LMS) such as Moodle, to support the lectures in higher education. We also will consider its implications for student support and online interaction, leading educational agents to a collaborating of different learning environments, where they can combine face-to-face instruction with computer-mediated instruction, blended-learning, and increases the possibilities for better quality and quantity of human communication in a learning background. In general components of learning management systems contain synchronous and asynchronous communication tools, management features, and assessment utilities. These assessment utilities allow lecturers to systematize basic assessment tasks. Assessments can be straightaway delivered to the student, and upon conclusion, immediately returned with grades and detailed feedback. Therefore learning management systems can also be used for assessment purposes in Higher Education.

Métodos "verdes" de produção de nanomateriais que promovem nanotecnologias sustentáveis

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Química

Avaliação do potencial eólico para geração de energia eléctrica

Trabalho Final de Mestrado para a obtenção do grau de Mestre em Engenharia Mecânica /Energia

Performing PET/CT studies: do they create anxiety?

Introduction: Anxiety is a common problem in primary care and specialty medical settings. Treating an anxious patient takes more time and adds stress to staff. Unrecognised anxiety may lead to exam repetition, image artifacts and hinder the scan performance. Reducing patient anxiety at the onset is probably the most useful means of minimizing artifactual FDG uptake, both fat brown and skeletal muscle uptake, as well patient movement and claustrophobia. The aim of the study was to examine the effects of information giving on the anxiety levels of patients who are to undergo a PET/CT and whether the patient experience is enhanced with the creation of a guideline. Methodology: Two hundred and thirty two patients were given two questionnaires before and after the procedure to determine their prior knowledge, concerns, expectations and experiences about the study. Verbal information was given by one of the technologists after the completion of the first questionnaire. Results: Our results show that the main causes of anxiety in patients who are having a PET/CT is the fear of the procedure itself, and fear of the results. The patients who suffered from greater anxiety were those who were scanned during the initial stage of a disease. No significant differences were found between the anxiety levels pre procedural and post procedural. Findings with regard to satisfaction show us that the amount of information given before the procedure does not change the anxiety levels and therefore, does not influence patient satisfaction. Conclusions: The performance of a PET/CT scan is an important and statistically generator of anxiety. PET/CT patients are often poorly informed and present with a range of anxieties that may ultimately affect examination quality. The creation of a guideline may reduce the stress of not knowing what will happen, the anxiety created and may increase their satisfaction in the experience of having a PET/CT scan.

Palinomorfos ante-cenomanianos do «Grés do Buçaco» (Lousã, Portugal) *

The palynological study of sediments from lower levels of Lousã basin (Lomba do Alveite Arkoses). is presented. The palynological association includes several species of Appendicisporites and Cicatricosisporites, Costatoperforosporites sp., Ischyosporites teixeirae, Pattelasporites tavaredensis, Echinatisporis sp., Spheripollenites perinatus, Tricolpopollenites sp. and Retitricolpites maximus. The presence of the last two forms, and the absence of Normapolles, suggest an ante-Cenomanian, most probably Albian age for the assemblage. From these results, the begining of the infilling of the Lousã basin, is, at least in part, synchronous with the deposition of the «Grés Grosseiro Inferior» from the Occidental portuguese Basin. The presence of Lower Cretaceous sediments directly overlying the Paleozoic basement, hence outside of the Occidental Portuguese Basin,is shown for the first time.

Performance assessment of a wind energy conversion system using a hierarchical controller structure

This paper deals with a hierarchical structure composed by an event-based supervisor in a higher level and two distinct proportional integral (PI) controllers in a lower level. The controllers are applied to a variable speed wind energy conversion system with doubly-fed induction generator, namely, the fuzzy PI control and the fractional-order PI control. The event-based supervisor analyses the operation state of the wind energy conversion system among four possible operational states: park, start-up, generating or brake and sends the operation state to the controllers in the lower level. In start-up state, the controllers only act on electric torque while pitch angle is equal to zero. In generating state, the controllers must act on the pitch angle of the blades in order to maintain the electric power around the nominal value, thus ensuring that the safety conditions required for integration in the electric grid are met. Comparisons between fuzzy PI and fractional-order PI pitch controllers applied to a wind turbine benchmark model are given and simulation results by Matlab/Simulink are shown. From the results regarding the closed loop point of view, fuzzy PI controller allows a smoother response at the expense of larger number of variations of the pitch angle, implying frequent switches between operational states. On the other hand fractional-order PI controller allows an oscillatory response with less control effort, reducing switches between operational states. (C) 2015 Elsevier Ltd. All rights reserved.

A saúde dos imigrantes em Portugal : que necessidades em saúde? : que utilização dos cuidados de saúde?

RESUMO - Portugal, país de imigração, viu aumentar a população imigrante em 4,56% de 2006 a 2008. Assim, torna-se importante conhecer não só as características socioeconómicas desta população imigrante, mas também quais as suas necessidades em saúde e que utilização fazem dos cuidados de saúde. Este trabalho baseou-se no IV Inquérito Nacional de Saúde realizado em 2005 e 2006 pelo INSA e analisou as populações portuguesa e imigrante nas variáveis de saúde e de utilização dos cuidados. Para a análise do rendimento utilizou-se a Curva de concentração proposta por Wagstaff, Índices de Concentração da Doença, de Utilização e Índice de LeGrand. Os resultados sugeriram melhor estado de saúde da população imigrante relativamente à população portuguesa (estado de saúde auto-reportado, sensação de mal-estar ou adoentado, dias de actividade limitada e dias de acamamento). Nas doenças crónicas (diabetes, asma e dor crónica), a população imigrante apresentou piores resultados na asma. Foram encontrados piores resultados em saúde entre as mulheres nos dois grupos de população, mas também mais frequência de utilização. Os imigrantes revelam também menor acessibilidade a consultas médicas e consumo de medicamentos. A análise do rendimento enquanto factor gerador de desigualdades em saúde permitiu concluir que existem desigualdades na distribuição do rendimento que condicionam tanto a população portuguesa como a população imigrante. Outros estudos poderão ser considerados para análise da saúde da população imigrante, especialmente os que incluam os cidadãos indocumentados, análise das populações por país de nascimento, os anos de permanência em Portugal e as causas de mortalidade. ---------------------------- ABSTRACT - Portugal, a country of immigration, has seen its immigrant population increasing 4.56% from 2006 to 2008. Therefore, it is important to analyse, not only the socioeconomic characteristics of immigrant population, but also their health needs and utilization of health care. This work was based on the IV National Health Survey conducted in 2005 and 2006 by INSA and analyzed the Portuguese and Immigrant populations in the variables of Health and Utilization of Health Services. In order to analyse the income, the Concentration Curve proposed by Wagstaff and the Concentration Index was used. The results suggested a better health in immigrant population compared with Portuguese population (state of self-reported health, feeling sick or ill, days of limited activity and days of lodging). For the variables of chronic diseases (diabetes, asthma and chronic pain), immigrants have shown worse results in asthma. In both groups (Immigrants and Portuguese), women have had more health problems than men. Lower utilization among Immigrants was found in outpatient visits and in prescription drug utilization. In conclusion, it can be stated that the analysis of the income as a generator of health inequalities showed inequalities in the income distribution that affects both Portuguese and immigrants’ health. Other studies may be considered to analyze immigrants’ health especially those that include undocumented immigrants, analysis of populations by country of birth, years of residence in Portugal and the causes of mortality.