In vivo co-ordinated interactions between inhibitory systems to control glutamate mediated hippocampal excitability.

We present an overview of the long-term adaptation of hippocampal neurotransmission to cholinergic and GABAergic deafferentation caused by excitotoxic lesion of the medial septum. Two months after septal microinjection of 2.7 nmol a -amino-3-hydroxy-5-methylisoxazole-4-propionate (AMPA), a 220% increase of GABA A receptor labelling in the hippo- campal CA3 and the hilus was shown, and also changes in hippocampal neurotransmission characterised by in vivo microdialysis and HPLC. Basal amino acid and purine extra- cellular levels were studied in control and lesioned rats. In vivo effects of 100 m M KCl perfusion and adenosine A 1 receptor blockade with 1,3-dipropyl- 8-cyclopentylxanthine (DPCPX) on their release were also investigated. In lesioned animals GABA, glutamate and glutamine basal levels were decreased and taurine, adenosine and uric acid levels increased. A similar response to KCl infusion occurred in both groups except for GABA and glutamate, which release decreased in lesioned rats. Only in lesioned rats, DPCPX increased GABA basal level and KCl-induced glutamate release, and decreased glutamate turnover. Our results evidence that an excitotoxic septal lesion leads to increased hippocampal GABA A receptors and decreased glutamate neurotransmis- sion. In this situation, a co-ordinated response of hippocampal retaliatory systems takes place to control neuron excitability.

Non-resorbable glass fibre-reinforced composite with porous surface as bone substitute material: Experimental studies in vitro and in vivo focused on bone-implant interface

The development of load-bearing osseous implant with desired mechanical and surface properties in order to promote incorporation with bone and to eliminate risk of bone resorption and implant failure is a very challenging task. Bone formation and resoption processes depend on the mechanical environment. Certain stress/strain conditions are required to promote new bone growth and to prevent bone mass loss. Conventional metallic implants with high stiffness carry most of the load and the surrounding bone becomes virtually unloaded and inactive. Fibre-reinforced composites offer an interesting alternative to metallic implants, because their mechanical properties can be tailored to be equal to those of bone, by the careful selection of matrix polymer, type of fibres, fibre volume fraction, orientation and length. Successful load transfer at bone-implant interface requires proper fixation between the bone and implant. One promising method to promote fixation is to prepare implants with porous surface. Bone ingrowth into porous surface structure stabilises the system and improves clinical success of the implant. The experimental part of this work was focused on polymethyl methacrylate (PMMA) -based composites with dense load-bearing core and porous surface. Three-dimensionally randomly orientated chopped glass fibres were used to reinforce the composite. A method to fabricate those composites was developed by a solvent treatment technique and some characterisations concerning the functionality of the surface structure were made in vitro and in vivo. Scanning electron microscope observations revealed that the pore size and interconnective porous architecture of the surface layer of the fibre-reinforced composite (FRC) could be optimal for bone ingrowth. Microhardness measurements showed that the solvent treatment did not have an effect on the mechanical properties of the load-bearing core. A push-out test, using dental stone as a bone model material, revealed that short glass fibre-reinforced porous surface layer is strong enough to carry load. Unreacted monomers can cause the chemical necrosis of the tissue, but the levels of leachable resisidual monomers were considerably lower than those found in chemically cured fibre-reinforced dentures and in modified acrylic bone cements. Animal experiments proved that surface porous FRC implant can enhance fixation between bone and FRC. New bone ingrowth into the pores was detected and strong interlocking between bone and the implant was achieved.

Multigram synthesis and in vivo efficacy studies of a novel multitarget anti-Alzheimer's compound

We describe the multigram synthesis and in vivo efficacy studies of a donepezil‒huprine hybrid that has been found to display a promising in vitro multitarget profile of interest for the treatment of Alzheimer's disease (AD). Its synthesis features as the key step a novel multigram preparative chromatographic resolution of intermediate racemic huprine Y by chiral HPLC. Administration of this compound to transgenic CL4176 and CL2006 Caenorhabditis elegans strains expressing human Aβ42, here used as simplified animal models of AD, led to a significant protection from the toxicity induced by Aβ42. However, this protective effect was not accompanied, in CL2006 worms, by a reduction of amyloid deposits. Oral administration for 3 months to transgenic APPSL mice, a well-established animal model of AD, improved short-term memory, but did not alter brain levels of Aβ peptides nor cortical and hippocampal amyloid plaque load. Despite the clear protective and cognitive effects of AVCRI104P4, the lack of Aβ lowering effect in vivo might be related to its lower in vitro potency toward Aβ aggregation and formation as compared with its higher anticholinesterase activities. Further lead optimization in this series should thus focus on improving the anti-amyloid/anticholinesterase activity ratio.

Characterizing Propionibacterium freudenreichii ssp. shermanii JS and Lactobacillus rhamnosus LC705 as a new probiotic combination: basic properties of JS and pilot in vivo assessment of the combination

Characterizing Propionibacterium freudenreichii ssp. shermanii JS and Lactobacillus rhamnosus LC705 as a new probiotic combination: basic properties of JS and pilot in vivo assessment of the combination Each candidate probiotic strain has to have the documentation for the proper identification with current molecular tools, for the biological properties, for the safety aspects and for the health benefits in human trials if the intention is to apply the strain as health promoting culture in the commercial applications. No generalization based on species properties of an existing probiotic are valid for any novel strain, as strain specific differences appear e.g. in the resistance to GI tract conditions and in health promoting benefits (Madsen, 2006). The strain evaluation based on individual strain specific probiotic characteristics is therefore the first key action for the selection of the new probiotic candidate. The ultimate goal in the selection of the probiotic strain is to provide adequate amounts of active, living cells for the application and to guarantee that the cells are physiologically strong enough to survive and be biologically active in the adverse environmental conditions in the product and in GI tract of the host. The in vivo intervention studies are expensive and time consuming; therefore it is not rational to test all the possible candidates in vivo. Thus, the proper in vitro studies are helping to eliminate strains which are unlikely to perform well in vivo. The aims of this study were to characterize the strains of Propionibacterium freudenreichii ssp. shermanii JS and Lactobacillus rhamnosus LC705, both used for decades as cheese starter cultures, for their technological and possible probiotic functionality applied in a combined culture. The in vitro studies of Propionibacterium freudenreichii ssp. shermanii JS focused on the monitoring of the viability rates during the acid and bile treatments and on the safety aspects such as antibiotic susceptibility and adhesion. The studies with the combination of the strains JS and LC705 administered in fruit juices monitored the survival of the strains JS and LC705 during the GI transit and their effect on gut wellbeing properties measured as relief of constipation. In addition, safety parameters such as side effects and some peripheral immune parameters were assessed. Separately, the combination of P. freudenreichii ssp. shermanii JS and Lactobacillus rhamnosus LC705 was evaluated from the technological point of view as a bioprotective culture in fermented foods and wheat bread applications. In this study, the role ofP. freudenreichii ssp. shermanii JS as a candidate probiotic culture alone and in a combination with L. rhamnosus LC705 was demonstrated. Both strains were transiently recovered in high numbers in fecal samples of healthy adults during the consumption period. The good survival through the GI transit was proven for both strains with a recovery rate from 70 to 80% for the JS strain and from 40 to 60% for the LC705 strain from the daily dose of 10 log10 CFU. The good survival was shown from the consumption of fruit juices which do not provide similar matrix protection for the cells as milk based products. The strain JS did not pose

Effect of metal ions on the in vitro availability of enoxacin, its in vivo implications, kinetic and antibacterial studies

The present paper describes the effect of metals ions on the in vitro availability of enoxacin (a second generation quinolone antibiotic) owing to drug-metal interaction. These interaction studies were performed at 37 °C in different pH environments simulating human body compartments and were studied by UV spectroscopic technique. In order to determine the probability of these reactions different kinetic parameters (dissolution constants (K) and free energy change (ΔG)) for these reactions were also calculated. It is proposed that the structure of enoxacin contains various electron donating sites which facilitate its binding with metallic cations forming chelates. Hence taking food products, nutritional supplements or multivitamins containing multivalent cations at the same time as enoxacin, could reduce the absorption of the drug into the circulation and thus would decrease the effectiveness of the drug. In addition, the MIC of enoxacin for various microorganisms before and after interaction with metal ions was calculated which in most cases was increased which possibly could impair the clinical efficacy of the drug.

Efeito de solventes orgânicos usados como veículos de fungicidas no controle in vitro e in vivo da incidência e da transmissão de Bipolaris sorokiniana em sementes de cevada

O objetivo deste trabalho foi comparar e avaliar, in vitro e in vivo, o efeito de solventes orgânicos utilizados como veículos de fungicidas na erradicação do fungo em sementes de cevada. Foram empregados o monoetilenoglicol (MEG) e o propilenoglicol (PPG), ambos a 0,5, 1 e 2%. Os fungicidas testados foram a iminoctadina, a iprodiona, o triadimenol, o triticonazol, o flutriafol e o difenoconazol. A incidência foi determinada pela ocorrência de B. sorokiniana em sementes plaquadas em meio seletivo. A erradicação foi obtida nos tratamentos com iminoctadina + MEG; iminoctadina + PPG (a 1 e 2%) e iprodiona + PPG (2%). A eficiência dos demais fungicidas foi melhorada com o emprego dos solventes orgânicos, mas sem alcançar a erradicação do fungo. In vivo na testemunha foram registrados níveis de transmissão de 89,7% para o coleóptilo e de 12,3% para a plúmula. Diferentemente dos dados obtidos in vitro, o emprego do PPG influenciou muito pouco no controle da transmissão, pois os fungicidas comportaram-se satisfatoriamente quando misturados com água. Os fungicidas iminoctadina e difenoconazol foram 100% efetivos em evitar a transmissão do fungo das sementes para os coleóptilos. Os solventes orgânicos mostraram potencialidade para melhorar a eficiência da maioria dos fungicidas testados in vitro, aspecto que não foi corroborado in vivo.

Controle de Alternaria solani em tomateiro por extratos de Curcuma longa e curcumina: II. Avaliação in vivo

A pinta preta, causada por Alternaria solani, é uma das mais importantes doenças da cultura do tomateiro no Brasil. Várias alternativas aos fungicidas têm sido avaliadas nos últimos anos na busca de produtos que controlem satisfatoriamente as doenças, tenham pequeno impacto ambiental e baixa toxicidade aos seres vivos. A cúrcuma, Curcuma longa, apresenta em seus rizomas compostos com comprovada atividade antimicrobiana. Dessa forma, o objetivo deste trabalho foi avaliar o controle de pinta preta em tomateiro utilizando extratos de cúrcuma e curcumina em condições de casa de vegetação. Os tratamentos utilizados foram: extrato de cúrcuma (1 e 10%), curcumina (50 e 100 mg/L), acibenzolar-S-metil (ASM) (25 mg do i.a./L), oxicloreto de cobre (1.100 mg do i.a./L), azoxystrobin (80 mg do i.a./L) e testemunha (água). A curcumina e os extratos brutos de cúrcuma apresentaram níveis de controle de pinta preta similares ao tratamento com fungicida cúprico, mas inferior ao azoxystrobin. Não houve diferenças estatísticas na produção comercial de tomate entre tratamentos. Somente o tratamento de curcumina 50 mg/l apresentou maior porcentagem de frutos grandes em relação à testemunha. Esses resultados indicam o potencial de controle de pinta preta em tomateiro com cúrcuma e curcumina.

Thermal decomposition and stability in a series of heterobimetallic carbonyl compounds of the type [Fe(CO)4(HgX)2] (X=Cl, Br, I)

Heterobimetallic carbonyl compounds of the type [Fe(CO)4(HgX)2] (X= Cl, Br, I), which have metal-metal bonds, have been prepared in order to study their thermal stabilities as a function of the halogen coordinated to mercury atoms. The characterization of the above complexes was carried out by elemental analysis, IR and NMR spectroscopies. Their thermal behaviour has been investigated and the final product was identified by IR spectroscopy and by X-ray powder diffractogram.

Avaliação de produtos químicos comerciais, in vitro e in vivo, no controle da doença foliar, mancha branca do milho, causada por Pantoea ananatis

Uma bactéria identificada como Pantoea ananatis foi recentemente isolada de lesões jovens da doença mancha branca do milho de plantas naturalmente infectadas. Esta bateria reproduziu sintomas semelhantes aos da doença quando inoculada em plantas de milho em casa de vegetação. Estudos anteriores realizados por outros autores demonstraram que o controle desta doença em condições de campo foi obtido pelo uso de fungicidas, principalmente o Mancozeb, nas fases iniciais de seu desenvolvimento. O objetivo deste estudo foi avaliar a freqüência de isolamento da bactéria P. ananatis a partir de plantas infectadas coletadas na região de Londrina, Estado do Paraná, e reproduzir sintomas da doença através de inoculações artificiais em plantas de milho em casa de vegetação. Utilizando os produtos químicos testados anteriormente por outros autores para o controle desta doença a campo, foi também objetivo deste trabalho avaliar o potencial destes produtos na inibição da bactéria tanto em condições de laboratório como em condições de infecção natural. Os resultados mostraram que P. ananatis foi isolada em 40% das lesões jovens coletadas a campo e quando inoculada em casa de vegetação sob condições controladas reproduziu sintomas semelhantes aos observados a campo. Entre os produtos químicos testados, o fungicida Mancozeb mostrou-se eficiente no controle da doença a campo, em concordância com os relatos anteriores. Este produto inibiu completamente o crescimento da bactéria em laboratório, explicando os resultados obtidos a campo. Os demais produtos não foram eficientes no controle a campo e eles também não inibiram a bactéria em laboratório. Estes resultados representam evidências adicionais de que a bactéria P. ananatis é o agente causal da doença mancha branca do milho.

Analysis and Control of Excitation, Field Weakening and Stability in Direct Torque Controlled Electrically Excited Synchronous Motor Drives

Direct torque control (DTC) is a new control method for rotating field electrical machines. DTC controls directly the motor stator flux linkage with the stator voltage, and no stator current controllers are used. With the DTC method very good torque dynamics can be achieved. Until now, DTC has been applied to asynchronous motor drives. The purpose of this work is to analyse the applicability of DTC to electrically excited synchronous motor drives. Compared with asynchronous motor drives, electrically excited synchronous motor drives require an additional control for the rotor field current. The field current control is called excitation control in this study. The dependence of the static and dynamic performance of DTC synchronous motor drives on the excitation control has been analysed and a straightforward excitation control method has been developed and tested. In the field weakening range the stator flux linkage modulus must be reduced in order to keep the electro motive force of the synchronous motor smaller than the stator voltage and in order to maintain a sufficient voltage reserve. The dynamic performance of the DTC synchronous motor drive depends on the stator flux linkage modulus. Another important factor for the dynamic performance in the field weakening range is the excitation control. The field weakening analysis considers both dependencies. A modified excitation control method, which maximises the dynamic performance in the field weakening range, has been developed. In synchronous motor drives the load angle must be kept in a stabile working area in order to avoid loss of synchronism. The traditional vector control methods allow to adjust the load angle of the synchronous motor directly by the stator current control. In the DTC synchronous motor drive the load angle is not a directly controllable variable, but it is formed freely according to the motor’s electromagnetic state and load. The load angle can be limited indirectly by limiting the torque reference. This method is however parameter sensitive and requires a safety margin between the theoretical torque maximum and the actual torque limit. The DTC modulation principle allows however a direct load angle adjustment without any current control. In this work a direct load angle control method has been developed. The method keeps the drive stabile and allows the maximal utilisation of the drive without a safety margin in the torque limitation.

Avaliação antagônica in vitro e in vivo de Trichoderma spp. a Rhizopus stolonifer em maracujazeiro amarelo

Para estudar a potencialidade antagônica de espécies de Trichoderma spp. in vitro e in vivo a Rhizopus stolonifer, patógeno causador da podridão floral do maracujazeiro, foram estudadas as espécies de Trichoderma viride, T. virens, T. harzianum e T. stromaticum. O crescimento micelial do fitopatógeno foi realizado pelo teste do pareamento de culturas, para crescimento individual foram utilizadas cinco temperaturas. Avaliou-se também o crescimento micelial em 24h e 48h, avaliando a taxa de crescimento dos isolados. Na produção de metabolitos voláteis e não voláteis foram utilizados papel celofane e sobreposição de placas. Em condição de campo os frutos/planta foram tratados com a suspensão na concentração de 2 x 10(8) Conídios/mL sendo avaliado o número médio de frutos aos 15 e 30. No pareamento de cultura todos os isolados de Trichoderma spp. apresentaram crescimento micelial, impedindo o desenvolvimento do fitopatógeno, para todos os isolados as temperaturas ideais de crescimento foram de 25ºC e 30ºC. Nos períodos de incubação de 24 e 48h, foram constatadas diferenças significativas no crescimento micelial entre os isolados os antagonistas apresentaram velocidade de crescimento maior que o fitopatógeno. Houve uma produção de metabólitos voláteis e não voláteis de ação antifúngica ao R. stolonifer. No ensaio em campo houve diferença significativa entre os tratamentos, verificando-se que o melhor resultado entre os antagonistas em estudo cujos percentuais de pegamento foram 74% para os tratamentos Trichoderma harzianum e T. virens, e os tratamentos T. viride e T. stromaticum obtiveram um porcentual de 75% enquanto a testemunha obteve um percentual de 42%.

In vivo sensitivity reduction of Puccinia triticina races, causal agent of wheat leaf rust, to DMI and QoI fungicides

Experiments were carried out to determine in vivo the IC50 and the IC90 for demethylation-inhibitor fungicides (DMIs, triazoles) and quinone outside inhibitors (QoIs, strobilurins) to the five most frequent races of Puccinia triticina in 2007 growing season in Southern Brazil. The tests were done in a greenhouse with wheat seedlings. DMI fungicides were tested at the concentrations, in mg/L, 0.0; 0.02; 0.2; 2.0; 20.0; 100.0 and 200.0, and QoIs at the concentrations 0.0; 0.0001; 0.001; 0.01; 0.1; 1 and 10.0 mg of active ingredient/L water. Fungicides were preventively applied at 24 hours before the inoculation of seedlings with the fungal spores. The effect of treatments was assessed based on the number of uredia/cm². The lowest IC50 (inhibitory concentration) for DMI fungicides determined for MCG-MN, sensitive race, ranged from 0.33 to 0.91 mg/L, while the highest values for MDP-MR, MDT-MR, MDK-MR, MFH-HT races, varied from 9.63 to 85.64 mg/L (suspected insensitivity). QoI fungicide presented an IC50 varying from 0.0018 to 0.14 mg/L. The sensitivity reduction factor for DMIs varied from 8.8 to 238.8, and for QoIs from 0.3 to 1.5 mg/L. Sensitivity reduction was confirmed for the races MDP-MR, MDT-MR, MDK-MR, MFH-HT to DMIs, as well as their sensitivity to QoI fungicides.

In vivo sensitivity of Phakopsora pachyrhizi to DMI and QoI fungicides

In in vivoexperiments the sensitivity of 18 isolates of Phakopsora pachyrhizifrom several regions of Brazil to IDM fungicides (cyproconazole, epoxiconazole and tebuconazole and an IQE (pyraclostrobin) were evaluated. The assessments were based on leaflet uredia density. Inhibitory concentration (IC50) and sensitivity reduction factor were determined for all fungicide x strain interactions. Tebuconazole sensitivity reduction was detected for most fungus isolates. In contrast, there was no fungicide shift in sensitivity of the fungus to pyraclostrobin. We conclude that the control failure of soybean rust found in some farms is due to the reduced sensitivity of the fungus to the IDM fungicide and that it remains sensitive to pyraclostrobin.

Wood as a model material for medical biomaterials. In vivo and in vitro studies with bone and Betula pubescens Ehrh

Novel biomaterials are needed to fill the demand of tailored bone substitutes required by an ever‐expanding array of surgical procedures and techniques. Wood, a natural fiber composite, modified with heat treatment to alter its composition, may provide a novel approach to the further development of hierarchically structured biomaterials. The suitability of wood as a model biomaterial as well as the effects of heat treatment on the osteoconductivity of wood was studied by placing untreated and heat‐treated (at 220 C , 200 degrees and 140 degrees for 2 h) birch implants (size 4 x 7mm) into drill cavities in the distal femur of rabbits. The follow‐up period was 4, 8 and 20 weeks in all in vivo experiments. The flexural properties of wood as well as dimensional changes and hydroxyl apatite formation on the surface of wood (untreated, 140 degrees C and 200 degrees C heat‐treated wood) were tested using 3‐point bending and compression tests and immersion in simulated body fluid. The effect of premeasurement grinding and the effect of heat treatment on the surface roughness and contour of wood were tested with contact stylus and non‐contact profilometry. The effects of heat treatment of wood on its interactions with biological fluids was assessed using two different test media and real human blood in liquid penetration tests. The results of the in vivo experiments showed implanted wood to be well tolerated, with no implants rejected due to foreign body reactions. Heat treatment had significant effects on the biocompatibility of wood, allowing host bone to grow into tight contact with the implant, with occasional bone ingrowth into the channels of the wood implant. The results of the liquid immersion experiments showed hydroxyl apatite formation only in the most extensively heat‐treated wood specimens, which supported the results of the in vivo experiments. Parallel conclusions could be drawn based on the results of the liquid penetration test where human blood had the most favorable interaction with the most extensively heat‐treated wood of the compared materials (untreated, 140 degrees C and 200 degrees C heat‐treated wood). The increasing biocompatibility was inferred to result mainly from changes in the chemical composition of wood induced by the heat treatment, namely the altered arrangement and concentrations of functional chemical groups. However, the influence of microscopic changes in the cell walls, surface roughness and contour cannot be totally excluded. The heat treatment was hypothesized to produce a functional change in the liquid distribution within wood, which could have biological relevance. It was concluded that the highly evolved hierarchical anatomy of wood could yield information for the future development of bulk bone substitutes according to the ideology of bioinspiration. Furthermore, the results of the biomechanical tests established that heat treatment alters various biologically relevant mechanical properties of wood, thus expanding the possibilities of wood as a model material, which could include e.g. scaffold applications, bulk bone applications and serving as a tool for both mechanical testing and for further development of synthetic fiber reinforced composites.