O uso de rhBMP-2 para aumento ósseo maxilar: relato de caso clínico

The bone resorption in the anterior maxilla, due to its aesthetic importance, can be considered one of the challenges in implant dentistry. Autogenous bone graft is the most indicated bone augmentation procedure, aiming an implant supported rehabilitation.. Alternatively, some other graft procedures can be done with homogenous and xenogenous bone graft, biomaterials and different associations. Additionally to the mentioned biomaterials, the bone morphogenetic protein (BMP), specially the rhBMP-2, which was characterized as a bone osteoinductor, and consecutively, a potential autogenous graft substitute, with previsibility and no necessity of association to other biomaterial. The objective of this study is to present a single case using the rhBMP-2 for bone augmentation.

Incorporação de enxertos ósseos autógenos e homógenos em humanos: abordagem tomográfica

The objective of this study was to evaluate the remodeling of autologous and homologous bone grafts in humans, using tomographic images. For this, CT images from 10 patients (5 treated with autologous bone grafts and 5 treated with homologous bone grafts), made previously to the grafting procedures, and 14 and 180 days post operatory were evaluated regarding to bone height, width, and density, in a total of 19 bone blocks, 10 homologous and 9 autologous. Results showed similarities between the two tested materials regarding bone width and density. It can be concluded that the homologous bone presented, in a tomographic approach, after 180 days of follow-up, characteristics which can corroborate its use as a bone graft material, providing and sustaining a good bone volume for oral rehabilitation with dental implants.

Influence of different toothpaste abrasives on the bristle end-rounding quality of toothbrushes

To evaluate the influence of different toothpaste abrasives on the bristle wear and bristle tip morphology of toothbrushes with different degrees of hardness. Material and methods Ninety samples of bovine incisor teeth were used in this study. The samples were randomly divided into three groups according to the bristle hardness of the toothbrush used: soft bristles (S); extra-soft bristles (ES); hard bristles (H). The toothbrushes of each group were randomly divided into six subgroups with five toothbrushes each, according to the abrasive of the toothpaste used in the simulation: Negative control (distilled water); toothpaste 1 (silica); toothpaste 2 (hydrated silica); toothpaste 3 (calcium carbonate, calcium bicarbonate and silica); toothpaste 4 (tetrapotassium pyrophosphate, silica and titanium dioxide); toothpaste 5 (calcium carbonate). The samples were placed in a toothbrushing simulating machine that simulating three months of brushing. The toothbrush bristles were evaluated by the bristle wear index, and the bristle tips morphology was evaluated by the bristle tip morphology index. Results The ES brush presented the highest bristle wear among the toothbrushes. Additionally, the S brushes showed better morphology of the bristles followed by ES and H brushes. The type of abrasive only influenced the bristle tip morphology of the ES brushes. The toothpaste 3 induced the worse bristle tip morphology than all the other toothpastes. Conclusions Different abrasives have influence only on the bristle tip morphology of the ES brushes.

Treatment of periodontal disease with an Er,Cr:YSGG laser in rats exposed to cigarette smoke inhalation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aplicação do laser Er,Cr:YSGG em periodontia e implantodontia: revisão de literatura

Lasers are widely used tools in many therapeutic modalities in medical lasers and can be divided into low and high intensity. For the treatment of periodontal disease, lowintensity lasers are related to reduce the number of bacteria and to induce inflammatory and analgesic properties. The high intensity lasers can be used in surgical procedures, improving hemostasis, promoting more accurate cuts, removal of dental calculus as well as thermomechanical and photochemical interactions with tissue. The high-intensity laser Erbium impregnated with chromium: YSGG laser has shown satisfactory results when applied in endodontic, restorative denstistry, surgical procedures and non-surgical periodontal treatment. The purpose of this review is to evaluate the studies that investigated the effects of Er, Cr: YSGG laser on the morphology and biocompatibility of titanium and root surfaces irradiated with these lasers, even beyond the effect on the treatment of periodontitis and periimplantitis.

Conduta no tratamento de gengivite ulcerativa necrosante (GUN) em serviço de urgência

Necrotizing ulcerative gingivitis is a periodontal disease which suddenly appears and presents an acute clinical course, characterized by patients' pain, discomfort and halitosis. Ulceration on papilla and marginal gingiva can be observed. For this reason, patients presenting this condition may seek dental assistance in Health Units or Graduation Institutions, being the dentist responsible for the adoption of a clinical treatment that minimizes symptomatology. The purpose of this case report is to expose and discuss aspects of clinical treatment for this disease applied to the reality of this service.

Gengivite Plasmocitária induzida por uso de pimenta

The aim of this case report is present a case in which the patient had plasma cell gingivitis induced by consumption of pepper. Patient A.M.S., male, 23 years, presented himself at the Clinic of Periodontology, complaining of severe pain, bleeding gums and tooth mobility. Interview was conducted not observing anything relevant. In oral evaluation, we observed in the anterior swollen gums, bleeding, suppuration and great touch, and tooth mobility. Being an aggressive framework in relation to patient age, we performed the following laboratory tests: complete blood count, blood sugar, and coagulation, and biopsy in the anterior inferior, because a diagnosis of lymphoma. At the end of antibiotic therapy, a significant improvement of clinical symptoms, pain relief, less swollen gums and reduce the suppuration and mobility. Laboratory tests showed no change. Fifteen days later, the patient returned with worsening of clinical status. The pathological diagnosis was plasma cell gingivitis and then performed a new history by placing greater emphasis on dietary habits, and the patient reported consumption of pepper in their meals, and relate this to clinical presentation. After elimination of pepper diet the patient showed remission of clinical data.

Efeito do ângulo de trabalho do ultrassom e do jato de bicarbonato sobre as superfícies ranculares

The aim of this study was to evaluate the effect of the working angle variation of the magnetoestritive ultrasonic (MU) and air polishing devices (APD) on the roughness and wear of dental root. Fifty bovine incisive teeth were used in this study. The proximal surfaces of the teeth were divided in three regions: coronal, median, and an apical. The coronal region was treated with a manual scaler, the apical region was treated with APD or with a MU and the medium region was maintained untreated to serve as a control. The teeth were divided in 11 groups according to the treatment applied: MU-0º; MU-30º; MU-45º; MU-60º; MU-90º; AP-0º; AP-30º; AP-45º; AP-60º; AP-90º; MS: manual scaler. To the statistical analysis, data submitted to the Anova and Tukey's test (p < 0.05). The manual curette promotes less roughness and higher tooth wear in comparison with the both ultrasonic and air polishing devices (p < 0.05). The angles of 45º, 60º and 90º caused higher rate of tooth wear and roughness when the MU was used (p < 0.05), while the angle of 90° caused a higher tooth wear than the angle of 30° when the APD was used (p < 0.05). The working angle variation influenced the tooth wear and roughness promoted by MU, whereas when using APD, the working angle variation influenced only the tooth wear.

Porphyromonas endodontalis in chronic periodontitis: a clinical and microbiological cross-sectional study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Conduta de tratamento de gengivite ulcerativa necrosante (GUN) em serviço de urgência

Necrotizing ulcerative gingivitis is a periodontal disease which suddenly appears and presents an acute clinical course, characterized by patients' pain, discomfort and halitosis. Ulceration on papilla and marginal gingiva can be observed. For this reason, patients presenting this condition may seek dental assistance in Health Units or Graduation Institutions, being the dentist responsible for the adoption of a clinical treatment that minimizes symptomatology. The purpose of this case report is to expose and discuss aspects of clinical treatment for this disease applied to the reality of this service.

The effect of the angle of instrumentation of the piezoelectric ultrasonic scaler on root surfaces

To evaluate the influence of variations in the working angle of the piezoelectric ultrasonic scaler (PUS) on root surfaces. Material and methods Fifty-five uniradicular bovine teeth were used, of which 25 teeth were used for the analysis of the roughness and root wear, while the remaining 30 teeth were used for the analysis of morphology (MRS) and the attachment of blood components (ABC). The teeth were randomly divided into five groups according to the type of treatment (G1-G5: piezoelectric ultrasonic scaler; G6: manual curette) and to the PUS working angle applied (G1: 0°; G2: 30°; G3: 45°; G4: 60°; G5: 90°). For statistical analysis, the data describing the MRS and ABC were analysed by the Kruskal–Wallis and Dunn's tests, and the data describing the roughness and tooth wear were analysed by anova and Tukey's tests at the significance level of 5%. Results Manual curette (MC) promoted a smoother root surface than the application of the PUS. The PUS used at the angles of 30° and 45° resulted in a high level of ABC that was comparable to that obtained by MC. Additionally, the group in which the PUS was applied at an angle of 45° exhibited less tooth wear than the other groups. Conclusions Changes in the working angle of the PUS influenced the characteristics of root surfaces after instrumentation.

A microscopic analysis of the effects of root surface scaling with different power parameters of er,cr: YSGG laser

The aim of this study was to evaluate the effects of different power parameters of an Erbium, Cromium: Yttrium, Scandium, Gallium, Garnet laser (Er,Cr:YSGG laser) on the morphology, attachment of blood components (ABC), roughness, and wear on irradiated root surfaces. Sixty-five incisive bovine teeth were used in this study, 35 of which were used for the analysis of root surface morphology and ABC. The remaining 30 teeth were used for roughness and root wear analysis. The samples were randomly allocated into seven groups: G1: Er,Cr:YSGG laser, 0.5 W; G2: Er,Cr:YSGG laser, 1.0 W; G3: Er,Cr:YSGG laser, 1.5 W; G4: Er,Cr:YSGG laser, 2.0 W; G5: Er,Cr:YSGG laser, 2.5 W; G6: Er,Cr:YSGG laser, 3.0 W; G7: scaling and root planning (SRP) with manual curettes. The root surfaces irradiated by Er,Cr:YSGG at 1.0 W and scaling with manual curettes presented the highest degrees of ABC. The samples irradiated by the Er,Cr:YSGG laser were rougher than the samples treated by the manual curette, and increasing the laser power parameters caused more root wear and greater roughness on the root surface. The Er,Cr:YSGG laser is safe to use for periodontal treatment, but it is not appropriate to use irradiation greater than 1.0 W for this purpose. Microsc. Res. Tech. 78:529–535, 2015. © 2015 Wiley Periodicals, Inc.

Educational Journey on the Teachers' Narrative

Initial and continuous education for teachers has been studied at Group of Studies and Research on Language, Teaching and Teachers’ narrative (GEPLENP in Portuguese). In order to do so, we use teacher’s narratives from public schools in Assis/SP. Narrative researches have been very widely spread either in Brazil or in any other country. Meaningful papers have shown how important the topic is as well as the method used. This research tries to identify teachers’ social representations, which result from historic, cultural and time constitutions in order to get close to group of teachers’ representations about their initial and continuous education. The individual and singular narrative method gives us the opportunity to access the history told by the participants. The results point out that initial education promotes the opposition between theory and praxis and use of tool is highlighted in continuous education, which limits possibilities of teachers’ reflection on their own school role thus evidencing institutional interests.

Aprende-se a ler na escola? um wstudo da aprendizagem de leitura na escola pública paulista

This article presents a study about the reading/formation of readers in the public school of São Paulo. To make this study the most present material in the school and the activities proposed in them are analized. What it is intended is to show that, many times, the difficulties of reading presented by the students in the external evaluations may be resulting from the kind of reading practiced in the scholar institution.