Characterization of bioactive compounds of dealcoholized wine: valuation of distillation process

O vinho tinto é uma importante fonte de compostos fenólicos com atividade antioxidante e que estão relacionados com a prevenção de doenças cardiovasculares e cancro. Estes compostos são um sub-produto do processo de destilação vínica utilizado para produzir aguardente necessária para a produção de Vinho do Porto. Esta tese tem como objetivo valorizar os compostos fenólicos resultantes das destilarias de vinho, através do estudo da sua composição, das interações com o material polimérico do vinho, da sua estabilidade durante o armazenamento e avaliação dos seus potenciais efeitos biológicos in vitro. Isto irá permitir definir aplicações para estes compostos como ingredientes alimentares com propriedades funcionais. Dois vinhos tintos (RW1 e RW2) foram utilizados como fonte de compostos fenólicos. A fim de estudar estes compostos, cada vinho foi evaporado à pressão atmosférica, permitindo obter o respetivo vinho desalcolizado (DW1 e DW2). Os polissacarídeos e compostos fenólicos presentes nos vinhos desalcolizados foram fracionados por extração em fase sólida utilizando cartuchos C18 sep-pak. A fração hidrofóbica, rica em compostos fenólicos, foi separada em frações ricas em ácidos fenólicos, em procianidinas e em antocianinas, as quais foram usadas para avaliar a sua contribuição para a atividade antioxidante total e caracterização fenólica detalhada dos DW. Foram obtidas quantidades comparáveis de compostos fenólicos totais (1.3 g/L para RW1 e DW1, e 3.1 para RW2 e DW2), de taninos (1.2 g/L para RW1 e DW1 e 1.6 para RW2 e DW2) e de antocianinas (0.24 g/L para RW1 e DW1 e 0.41 para RW2 e DW2) para os vinhos e para os respetivos vinhos desalcolizados. A determinação da atividade antioxidante de RW e DW pelos métodos do DPPH e ABTS também originou valores semelhantes, permitindo inferir que o processo de destilação realizado não promoveu uma perda relevante de compostos fenólicos. A atividade antioxidante total de vinho deveu-se essencialmente à fração rica em antocianinas. Os dois DW foram dialisados para se obter o material polimérico dos vinhos (WPM1 e WPM2). O WPM1 e WPM2 apresentavam 1.1 e 1.3 g/L de material sólido, respetivamente. O WPM (WPM1 e WPM2) era composto por polissacarídeos (31 e 36%), proteínas (10 e 12%) e também por compostos fenólicos (32 e 43%). A análise de açúcares mostrou que as manoproteínas e as arabinogalactanas eram os principais polissacarídeos presentes. A extração do WPM com metanol deu origem a um material insolúvel em metanol (PMi) e a uma fração solúvel em metanol, que continuava a conter hidratos de carbono e compostos fenólicos, mostrando uma forte interação entre estes compostos. Para determinar a energia de ativação (Ea) da libertação dos compostos fenólicos de fracções de material polimérico do vinho, foram realizadas diálises do DW, WPM e PMi, utilizando-se quatro concentrações diferentes, a cinco temperaturas (5-40 °C). O valor da Ea foi 25 para o WPM e 61 kJ/mol para o PMi, mostrando que os compostos fenólicos do vinho podem estar associados de forma diferente à matriz polimérica e que uma fração pode estar, ainda, fortemente associada a esta matriz. A fim de avaliar a possível existência de interações seletivas com os compostos fenólicos, o WPM foi fracionado, permitindo a obtenção de uma fração rica em manoproteínas (MP), através de uma cromatografia de afinidade com concanavalina A e 3 frações ricas em arabinogalactanas (AG0, AG1 e AG2) obtidas por cromatografia de troca aniónica. Foi avaliada a difusão de nove antocianinas monoméricas através de uma membrana de diálise, em presença do WPM, e das frações ricas em MP e em AG. A diálise dos compostos fenólicos livres do vinho foi realizada como ensaio em branco. Todas as frações poliméricas mostraram capacidade para reter as antocianinas, embora em diferente extensão. Foi observada uma capacidade de retenção maior para as antocianinas acilglucosiladas do que para as antocianinas glucosiladas. A fração rica em AG teve uma maior contribuição para a capacidade de retenção das antocianinas pelo material polimérico vinho do que a fração rica em MP, principalmente quando as antocianinas estavam acetiladas. Com o objetivo de estudar formas para preservar, a longo prazo, as propriedades antioxidantes dos compostos fenólicos, o extrato de compostos fenólicos (PCE), em pó, foi armazenado em diferentes condições de luz e atmosfera, à temperatura ambiente durante 1 ano. Observou-se que o PCE armazenado no escuro, dentro de um exsicador sob atmosfera de azoto, preservou 95% da atividade antioxidante inicial. Também foram avaliadas as melhores condições para preservar as antocianinas quando em solução, armazenadas a duas temperaturas (5 e 30 ºC) durante 3 meses. A adição de 0.5 g/L de uma fração rica em polissacarídeos a um vinho armazenado a 30 ºC promoveu a proteção das antocianinas, especialmente das antocianinas cumaroiladas. Os potenciais efeitos biológicos dos compostos fenólicos foram avaliados em diferentes sistemas celulares in vitro utilizando as seguintes frações: WPM, WPS (polissacarídeos do vinho), WPC (compostos fenólicos do vinho), PA-E (fração rica em ácidos fenólicos), PR-E (fração rica em procianidinas) e APP-E (fração rica em antocianinas e procianidinas poliméricas). Foi observada uma maior viabilidade celular quando as células do carcinoma do cólon HT-29 foram expostas a dois agentes oxidantes (radiação UV e H2O2) em presença das frações PR-E e APP-E. Além disso, os extratos WPS, WPC, PR-E e APP-E mostraram propriedades anti-inflamatórias, avaliadas pela inibição da produção de NO por células de macrófagos RAW264.7, sendo o extrato APP-E (0.19 mg/mL) o que exibiu a maior capacidade anti-inflamatória. A fim de elucidar as propriedades antioxidantes dos extratos do vinho em células humanas, os glóbulos vermelhos (RBC) foram selecionados como um modelo metabolicamente simples. Os extratos WPM, WPS, WPC, PR-E, e APP-E mostraram efeito anti-hemolítico para a hemólise dos RBC provocada pelo peróxido de hidrogénio (H2O2) e pelo di-hidrocloreto de 2,2'-azo-bis(2-diaminopropano) (AAPH). Os resultados obtidos permitem concluir que o processo de desalcoolização dos vinhos à pressão atmosférica, preservou as principais características antioxidantes dos compostos fenólicos. Estes compostos podem contribuir para a defesa das células contra agentes oxidantes, nomeadamente por terem um potencial de atividades anti-inflamatória e anti-hemolítica, promovendo a viabilidade celular. A interação dos compostos fenólicos do vinho com o material polimérico permite inferir uma dosagem contínua e gradual das antocianinas vinho tinto após a sua ingestão, contribuindo para um período mais longo da sua exposição e, como consequência, dos seus potenciais benefícios para a saúde.

Alkaline-earth aluminosilicate-based glass and glass-ceramic sealants for functional applications

The planar design of solid oxide fuel cell (SOFC) is the most promising one due to its easier fabrication, improved performance and relatively high power density. In planar SOFCs and other solid-electrolyte devices, gas-tight seals must be formed along the edges of each cell and between the stack and gas manifolds. Glass and glass-ceramic (GC), in particular alkaline-earth alumino silicate based glasses and GCs, are becoming the most promising materials for gas-tight sealing applications in SOFCs. Besides the development of new glass-based materials, new additional concepts are required to overcome the challenges being faced by the currently existing sealant technology. The present work deals with the development of glasses- and GCs-based materials to be used as a sealants for SOFCs and other electrochemical functional applications. In this pursuit, various glasses and GCs in the field of diopside crystalline materials have been synthesized and characterized by a wide array of techniques. All the glasses were prepared by melt-quenching technique while GCs were produced by sintering of glass powder compacts at the temperature ranges from 800−900 ºC for 1−1000 h. Furthermore, the influence of various ionic substitutions, especially SrO for CaO, and Ln2O3 (Ln=La, Nd, Gd, and Yb), for MgO + SiO2 in Al-containing diopside on the structure, sintering and crystallization behaviour of glasses and properties of resultant GCs has been investigated, in relevance with final application as sealants in SOFC. From the results obtained in the study of diopside-based glasses, a bilayered concept of GC sealant is proposed to overcome the challenges being faced by (SOFCs). The systems designated as Gd−0.3 (in mol%: 20.62MgO−18.05CaO−7.74SrO−46.40SiO2−1.29Al2O3 − 2.04 B2O3−3.87Gd2O3) and Sr−0.3 (in mol%: 24.54 MgO−14.73 CaO−7.36 SrO−0.55 BaO−47.73 SiO2−1.23 Al2O3−1.23 La2O3−1.79 B2O3−0.84 NiO) have been utilized to realize the bi-layer concept. Both GCs exhibit similar thermal properties, while differing in their amorphous fractions, revealed excellent thermal stability along a period of 1,000 h. They also bonded well to the metallic interconnect (Crofer22APU) and 8 mol% yttrium stabilized zirconium (8YSZ) ceramic electrolyte without forming undesirable interfacial layers at the joints of SOFC components and GC. Two separated layers composed of glasses (Gd−0.3 and Sr−0.3) were prepared and deposited onto interconnect materials using a tape casting approach. The bi-layered GC showed good wetting and bonding ability to Crofer22APU plate, suitable thermal expansion coefficient (9.7–11.1 × 10–6 K−1), mechanical reliability, high electrical resistivity, and strong adhesion to the SOFC componets. All these features confirm the good suitability of the investigated bi-layered sealant system for SOFC applications.

Associations of the mechanical, anthropometric and gait contributors to the knee adduction moment during paediatric gait

The knee adduction moment (KAM) during gait has been proposed as an indirect measure of dynamic knee joint loading and has been reported to be higher in obese children [1, 2]. The KAM is primarily calculated from the resultant ground reaction force (GRF) and the lever arm length, both of which can be manipulated through weight-loss or medical interventions [1]. However, there is little data on the relationships between the mechanical, anthropometric and gait contributors to the KAM during paediatric gait. The objectives of the study were to examine the associations with the first (1st) and second (2nd) peak KAM (pKAM) and: (1) centre of pressure (CoP), KAM lever arm length, vertical and mediolateral ground reaction forces (GRF) and, (2) fat mass, height, step width, foot rotation, knee rotation and walking velocity.

A corpus-based translation study on english-persian verb phrase ellipsis

Dissertação de mest., Natural Language Processing & Human Language Technology, Faculdade de Ciências Humanas e Sociais, Univ. do Algarve, 2011

O impacto da avaliação externa numa escola da Marinha Portuguesa

Tese de mestrado, Ciências da Educação (Avaliação em Educação), Universidade de Lisboa, Instituto de Educação, 2010

Taking environmental engineering out of the laboratory

Environmental engineering is a core component of most construction and surveying undergraduate courses. It is generally accepted that students on these courses should have an understanding of thermal comfort, heat transfer, condensation, lighting, noise transmission and acoustics. Experiments are essential in developing students’ awareness and understanding of the underlying physical concepts which drive environmental engineering solutions. Traditionally these experiments have been conducted by students working in small groups in laboratories. However, increasing student numbers and, in particular, the growth in part time study, have placed significant additional demands on limited laboratory resources. The availability of reasonably priced, simple, hand-held equipment has made it possible for students to conduct experiments outside the confines of the laboratory. Furthermore, various professional software packages (some of which are freely available online) enable the resultant data to be further developed and analysed in conjunction with the conventional textbook approach. This paper examines these alternative approaches to the traditional laboratory experiment. An assessment is provided of the types of experiment which are both possible and appropriate, and the efficacy of these approaches is considered.

Impact of energy-using product policies

Energy-using products (EuPs), such as domestic appliances, audio-visual and ICT equipment contribute significantly to CO2 emissions, both in the domestic and non-domestic sectors. Policies that encourage the use of more energy efficient products can therefore generate significant reductions in overall energy consumption and hence, CO2 emissions. To the extent that these policies cause an increase the average production cost of EuPs, they may impose economic costs on producers, or on consumers, or on both. In this theoretical paper, an adaptation of a simple vertical product differentiation model – in which products are characterised in terms of their quality and their energy consumption – is used to analyse the impact of the different EuP polices on product innovation and to assess the resultant economic impacts on producers and consumers. It is shown that whereas the imposition of a binding product standard for energy efficiency unambiguously reduces aggregate profit and increases the average market price in the absence of any learning effects, the introduction or strengthening of demand-side measures (such as energy labelling) may reduce, or increase, aggregate profit. Even in the case where the overall impact is unambiguously negative, the effects of product innovation and learning can be in either direction.

Nanofibers fabricated using triaxial electrospinning as zero order drug delivery systems

A new strategy for creating functional trilayer nanofibers through triaxial electrospinning is demonstrated. Ethyl cellulose (EC) was used as the filament-forming matrix in the outer, middle, and inner working solutions and was combined with varied contents of the model active ingredient ketoprofen (KET) in the three fluids. Triaxial electrospinning was successfully carried out to generate medicated nanofibers. The resultant nanofibers had diameters of 0.74 ± 0.06 μm, linear morphologies, smooth surfaces, and clear trilayer nanostructures. The KET concentration in each layer gradually increased from the outer to the inner layer. In vitro dissolution tests demonstrated that the nanofibers could provide linear release of KET over 20 h. The protocol reported in this study thus provides a facile approach to creating functional nanofibers with sophisticated structural features.

Electroanalysis of urinary L-dopa using tyrosinase immobilized on gold nanoelectrode ensembles

The performance of an amperometric biosensor constructed by associating tyrosinase (Tyr) enzyme with the advantages of a 3D gold nanoelectrode ensemble (GNEE) is evaluated in a flow-injection analysis (FIA) system for the analysis of l-dopa. GNEEs were fabricated by electroless deposition of the metal within the pores of polycarbonate track-etched membranes. A simple solvent etching procedure based on the solubility of polycarbonate membranes is adopted for the fabrication of the 3D GNEE. Afterward, enzyme was immobilized onto preformed self-assembled monolayers of cysteamine on the 3D GNEEs (GNEE-Tyr) via cross-linking with glutaraldehyde. The experimental conditions of the FIA system, such as the detection potential (−0.200 V vs. Ag/AgCl) and flow rates (1.0 mL min−1) were optimized. Analytical responses for l-dopa were obtained in a wide concentration range between 1 × 10−8 mol L−1 and 1 × 10−2 mol L−1. The limit of quantification was found to be 1 × 10−8 mol L−1 with a resultant % RSD of 7.23% (n = 5). The limit of detection was found to be 1 × 10−9 mol L−1 (S/N = 3). The common interfering compounds, namely glucose (10 mmol L−1), ascorbic acid (10 mmol L−1), and urea (10 mmol L−1), were studied. The recovery of l-dopa (1 × 10−7 mol L−1) from spiked urine samples was found to be 96%. Therefore, the developed method is adequate to be applied in the clinical analysis.

An integrated recycling approach for GFRP pultrusion wastes: recycling and reuse assessment into new composite materials using Fuzzy Boolean Nets

In this study, efforts were made in order to put forward an integrated recycling approach for the thermoset based glass fibre reinforced polymer (GPRP) rejects derived from the pultrusion manufacturing industry. Both the recycling process and the development of a new cost-effective end-use application for the recyclates were considered. For this purpose, i) among the several available recycling techniques for thermoset based composite materials, the most suitable one for the envisaged application was selected (mechanical recycling); and ii) an experimental work was carried out in order to assess the added-value of the obtained recyclates as aggregates and reinforcement replacements into concrete-polymer composite materials. Potential recycling solution was assessed by mechanical behaviour of resultant GFRP waste modified concrete-polymer composites with regard to unmodified materials. In the mix design process of the new GFRP waste based composite material, the recyclate content and size grade, and the effect of the incorporation of an adhesion promoter were considered as material factors and systematically tested between reasonable ranges. The optimization process of the modified formulations was supported by the Fuzzy Boolean Nets methodology, which allowed finding the best balance between material parameters that maximizes both flexural and compressive strengths of final composite. Comparing to related end-use applications of GFRP wastes in cementitious based concrete materials, the proposed solution overcome some of the problems found, namely the possible incompatibilities arisen from alkalis-silica reaction and the decrease in the mechanical properties due to high water-cement ratio required to achieve the desirable workability. Obtained results were very promising towards a global cost-effective waste management solution for GFRP industrial wastes and end-of-life products that will lead to a more sustainable composite materials industry.

Mix design process of polyester polymer mortars modified with recycled GFRP waste materials

In this study, the effect of incorporation of recycled glass fibre reinforced plastics (GFRP) waste materials, obtained by means of shredding and milling processes, on mechanical behaviour of polyester polymer mortars (PM) was assessed. For this purpose, different contents of GFRP recyclates, between 4% up to 12% in weight, were incorporated into polyester PM materials as sand aggregates and filler replacements. The effect of the addition of a silane coupling agent to resin binder was also evaluated. Applied waste material was proceeding from the shredding of the leftovers resultant from the cutting and assembly processes of GFRP pultrusion profiles. Currently, these leftovers as well as non-conform products and scrap resulting from pultrusion manufacturing process are landfilled, with additional costs to producers and suppliers. Hence, besides the evident environmental benefits, a viable and feasible solution for these wastes would also conduct to significant economic advantages. Design of experiments and data treatment were accomplish by means of full factorial design approach and analysis of variance ANOVA. Experimental results were promising toward the recyclability of GFRP waste materials as partial replacement of aggregates and reinforcement for PM materials, with significant improvements on mechanical properties of resultant mortars with regards to waste-free formulations.

Sustainable waste recycling solution for the glass fibre reinforced polymer composite materials industry

In this paper the adequacy and the benefit of incorporating glass fibre reinforced polymer (GFRP) waste materials into polyester based mortars, as sand aggregates and filler replacements, are assessed. Different weight contents of mechanically recycled GFRP wastes with two particle size grades are included in the formulation of new materials. In all formulations, a polyester resin matrix was modified with a silane coupling agent in order to improve binder-aggregates interfaces. The added value of the recycling solution was assessed by means of both flexural and compressive strengths of GFRP admixed mortars with regard to those of the unmodified polymer mortars. Planning of experiments and data treatment were performed by means of full factorial design and through appropriate statistical tools based on analyses of variance (ANOVA). Results show that the partial replacement of sand aggregates by either type of GFRP recyclates improves the mechanical performance of resultant polymer mortars. In the case of trial formulations modified with the coarser waste mix, the best results are achieved with 8% waste weight content, while for fine waste based polymer mortars, 4% in weight of waste content leads to the higher increases on mechanical strengths. This study clearly identifies a promising waste management solution for GFRP waste materials by developing a cost-effective end-use application for the recyclates, thus contributing to a more sustainable fibre-reinforced polymer composites industry.

Microstructure, mechanical properties and chemical degradation of brazed AISI 316 stainless steel/alumina systems

The main aims of the present study are simultaneously to relate the brazing parameters with: (i) the correspondent interfacial microstructure, (ii) the resultant mechanical properties and (iii) the electrochemical degradation behaviour of AISI 316 stainless steel/alumina brazed joints. Filler metals on such as Ag–26.5Cu–3Ti and Ag–34.5Cu–1.5Ti were used to produce the joints. Three different brazing temperatures (850, 900 and 950 °C), keeping a constant holding time of 20 min, were tested. The objective was to understand the influence of the brazing temperature on the final microstructure and properties of the joints. The mechanical properties of the metal/ceramic (M/C) joints were assessed from bond strength tests carried out using a shear solicitation loading scheme. The fracture surfaces were studied both morphologically and structurally using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction analysis (XRD). The degradation behaviour of the M/C joints was assessed by means of electrochemical techniques. It was found that using a Ag–26.5Cu–3Ti brazing alloy and a brazing temperature of 850 °C, produces the best results in terms of bond strength, 234 ± 18 MPa. The mechanical properties obtained could be explained on the basis of the different compounds identified on the fracture surfaces by XRD. On the other hand, the use of the Ag–34.5Cu–1.5Ti brazing alloy and a brazing temperature of 850 °C produces the best results in terms of corrosion rates (lower corrosion current density), 0.76 ± 0.21 μA cm−2. Nevertheless, the joints produced at 850 °C using a Ag–26.5Cu–3Ti brazing alloy present the best compromise between mechanical properties and degradation behaviour, 234 ± 18 MPa and 1.26 ± 0.58 μA cm−2, respectively. The role of Ti diffusion is fundamental in terms of the final value achieved for the M/C bond strength. On the contrary, the Ag and Cu distribution along the brazed interface seem to play the most relevant role in the metal/ceramic joints electrochemical performance.

Optimising the energy consumption on pultrusion process

This study is based on a previous experimental work in which embedded cylindrical heaters were applied to a pultrusion machine die, and resultant energetic performance compared with that achieved with the former heating system based on planar resistances. The previous work allowed to conclude that the use of embedded resistances enhances significantly the energetic performance of pultrusion process, leading to 57% decrease of energy consumption. However, the aforementioned study was developed with basis on an existing pultrusion die, which only allowed a single relative position for the heaters. In the present work, new relative positions for the heaters were investigated in order to optimise heat distribution process and energy consumption. Finite Elements Analysis was applied as an efficient tool to identify the best relative position of the heaters into the die, taking into account the usual parameters involved in the process and the control system already tested in the previous study. The analysis was firstly developed based on eight cylindrical heaters located in four different location plans. In a second phase, in order to refine the results, a new approach was adopted using sixteen heaters with the same total power. Final results allow to conclude that the correct positioning of the heaters can contribute to about 10% of energy consumption reduction, decreasing the production costs and leading to a better eco-efficiency of pultrusion process.

Experiments on new polymer based mortars filled with FRP waste recyclates - a quantitative analysis

Glass fibre-reinforced plastics (GFRP) have been considered inherently difficult to recycle due to both: cross-linked nature of thermoset resins, which cannot be remolded, and complex composition of the composite itself. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, efforts were made in order to recycle grinded GFRP waste, proceeding from pultrusion production scrap, into new and sustainable composite materials. For this purpose, GFRP waste recyclates, were incorporated into polyester based mortars as fine aggregate and filler replacements at different load contents and particle size distributions. Potential recycling solution was assessed by mechanical behaviour of resultant GFRP waste modified polymer mortars. Results revealed that GFRP waste filled polymer mortars present improved flexural and compressive behaviour over unmodified polyester based mortars, thus indicating the feasibility of the waste reuse in polymer mortars and concrete. © 2011, Advanced Engineering Solutions.