Urban space and industrial heritage

Postprint (published version)

Improving Label Space Usage for Ethernet Label Switched Paths

Ethernet is becoming the dominant aggregation technology for carrier transport networks; however, as it is a LAN technology, native bridged ethernet does not fulfill all the carrier requirements. One of the schemes proposed by the research community to make ethernet fulfill carrier requirements is ethernet VLAN-label switching (ELS). ELS allows the creation of label switched data paths using a 12-bit label encoded in the VLAN TAG control information field. Previous label switching technologies such as MPLS use more bits for encoding the label. Hence, they do not suffer from label sparsity issues as ELS might. This paper studies the sparsity issues resulting from the reduced ELS VLAN-label space and proposes the use of the label merging technique to improve label space usage. Experimental results show that label merging considerably improves label space usage

Characterizing major avalanche episodes in space and time in the twentieth and early twentyfirst centuries in the Catalan Pyrenees

With the aim of better understanding avalanche risk in the Catalan Pyrenees, the present work focuses on the analysis of major (or destructive) avalanches. For such purpose major avalanche cartography was made by an exhaustive photointerpretation of several flights, winter and summer field surveys and inquiries to local population. Major avalanche events were used to quantify the magnitude of the episodes during which they occurred, and a Major Avalanche Activity Magnitude Index (MAAMI) was developed. This index is based on the number of major avalanches registered and its estimated frequency in a given time period, hence it quantifies the magnitude of a major avalanche episode or winter. Furthermore, it permits a comparison of the magnitude between major avalanche episodes in a given mountain range, or between mountain ranges, and for a long enough period, it should allow analysis of temporal trends. Major episodes from winter 1995/96 to 2013/14 were reconstructed. Their magnitude, frequency and extent were also assessed. During the last 19 winters, the episodes of January 22-23 and February 6-8 in 1996 were those with highest MAAMI values,followed by January 30-31, 2003, January 29, 2006, and January 24-25, 2014. To analyze the whole twentieth century, a simplified MAAMI was defined in order to attain the same purpose with a less complete dataset. With less accuracy, the same parameters were obtained at winter time resolution throughout the twentieth century. Again, 1995/96 winter had the highest MAAMI value followed by 1971/72, 1974/75 and 1937/38 winter seasons. The analysis of the spatial extent of the different episodes allowed refining the demarcation of nivological regions, and improving our knowledge about the atmospheric patterns that cause major episodes and their climatic interpretation. In some cases, the importance of considering a major avalanche episode as the result of a previous preparatory period, followed by a triggering one was revealed.

A state-space approach for measuring regional manufacturing production indices

In this paper we propose a latent variable model, in the spirit of Israilevich and Kuttner (1993), to measure regional manufacturing production. To test the validity of the proposed methodology, we have applied it for those Spanish regions that have a direct quantitative index. The results demonstrate the accuracy of the methodology proposed and show that it can overcome some of the difficulties of the indirect method applied by the INE, the Spanish National Institute of Statistics.

Deformation of Gabor systems

We introduce a new notion for the deformation of Gabor systems. Such deformations are in general nonlinear and, in particular, include the standard jitter error and linear deformations of phase space. With this new notion we prove a strong deformation result for Gabor frames and Gabor Riesz sequences that covers the known perturbation and deformation results. Our proof of the deformation theorem requires a new characterization of Gabor frames and Gabor Riesz sequences. It is in the style of Beurling's characterization of sets of sampling for bandlimited functions and extends significantly the known characterization of Gabor frames 'without inequalities' from lattices to non-uniform sets.

Espacios olvidados, lugares diferenciados: transformación social del espacio urbano en Bogotá (1850- 1880) = Forgotten Spaces, distinct places: Social transformation of urban space in Bogotá (1850-1880)

The purpose of this article is linked to some forms of recovery of social and urban spaces fallen into oblivion that are evident in the social transformation of urban space in Bogotá between 1850 and 1880.The following paper presents the preliminary results of the research entitled practices and social uses of water in Bogotá (1850-1888). The text links in first discussions about the understanding of the city as a drawing in space, moving to describe, the growth of the city, integrating its historical, social and cultural structuring

Eixo quinário: um elemento de simetria presente em moléculas e quasi-cristais - um experimento didático em cristalografia

Axis of quinary symmetry occur in molecular symmetry, as in the case of fullerenes, and in crystalline symmetry, in the quasicrystals. Minerals with pentagonal faces do not have this element of symmetry, as the pyrite (FeS2) which shows a ridge that is different from the other ones, in any face of the crystal. The purpose of this paper is to demonstrate conceptual differences between pyritohedron and regular pentagonal dodecahedron symmetries, discussing students' difficulties to identify them. Also is proposed a didactic experiment with spatial models of the above-mentioned forms and the demonstration of its symmetries in clinographic projections.

Quasi allegro

Soitinnus: lauluääni, piano.

3D Stripixel Detectors Simulation

Solid-state silicon detectors have replaced conventional ones in almost all recent high-energy physics experiments. Pixel silicon sensors don't have any alternative in the area near the interaction point because of their high resolution and fast operation speed. However, present detectors hardly withstand high radiation doses. Forthcoming upgrade of the LHC in 2014 requires development of a new generation of pixel detectors which will be able to operate under ten times increased luminosity. A planar fabrication technique has some physical limitations; an improvement of the radiation hardness will reduce sensitivity of a detector. In that case a 3D pixel detector seems to be the most promising device which can overcome these difficulties. The objective of this work was to model a structure of the 3D stripixel detector and to simulate electrical characteristics of the device. Silvaco Atlas software has been used for these purposes. The structures of single and double sided dual column detectors with active edges were described using special command language. Simulations of these detectors have shown that electric field inside an active area has more uniform distribution in comparison to the planar structure. A smaller interelectrode space leads to a stronger field and also decreases the collection time. This makes the new type of detectors more radiation resistant. Other discovered advantages are the lower full depletion voltage and increased charge collection efficiency. So the 3D stripixel detectors have demonstrated improved characteristics and will be a suitable replacement for the planar ones.

A quasi-materialist, quasi-dualist solution to the mind-body problem

If the mental can affect, or be affected by, the physical, then the mental must itself be physical. Otherwise the physical world would not be explanatorily closed. But it is closed. There are reasons to hold that materialism (in both its reductive and non-reductive varieties) is false. So how are we to explain the apparent responsiveness of the physical to the mental and vice versa? The only possible solution seems to be this: physical objects are really projections or isomorphs of objects whose essential properties are mental. (A slightly less accurate way of putting this would be to say: the constitutive - i.e. the non-structural and non-phenomenal - properties of physical objects are mental, i.e. are such as we are used to encountering only in "introspection".) The chair, qua thing that I can know through sense perception, and through hypotheses based strictly thereupon, is a kind of shadow of an object that is exactly like it, except that this other objects essential properties are mental. This line of thought, though radically counterintuitive, explains the apparent responsiveness of the mental to the physical, and vice versa, without being open to any of the criticisms to which materialism, dualistic interaction ism, and epiphenomenalism are open.

Quasi-objects and actors in the web of belief. Formation of a national nuclear waste management system: the case of Finland

Paper presented in ISA RC23 meeting, Gothenburg July 16th 2010

Design of Pulsed Electroacoustic Measurement System for Space Charge Characterisation

Pulsed electroacoustic (PEA) method is a commonly used non-destructive technique for investigating space charges. It has been developed since early 1980s. These days there is continuing interest for better understanding of the influence of space charge on the reliability of solid electrical insulation under high electric field. The PEA method is widely used for space charge profiling for its robust and relatively inexpensive features. The PEA technique relies on a voltage impulse used to temporarily disturb the space charge equilibrium in a dielectric. The acoustic wave is generated by charge movement in the sample and detected by means of a piezoelectric film. The spatial distribution of the space charge is contained within the detected signal. The principle of such a system is already well established, and several kinds of setups have been constructed for different measurement needs. This thesis presents the design of a PEA measurement system as a systems engineering project. The operating principle and some recent developments are summarised. The steps of electrical and mechanical design of the instrument are discussed. A common procedure for measuring space charges is explained and applied to verify the functionality of the system. The measurement system is provided as an additional basic research tool for the Corporate Research Centre of ABB (China) Ltd. It can be used to characterise flat samples with thickness of 0.2–0.5 mm under DC stress. The spatial resolution of the measurement is 20 μm.

Loss Modelling of Three-Level Inverters controlled with Space Vector Modulation Technique

The objective of this master’s thesis is to investigate the loss behavior of three-level ANPC inverter and compare it with conventional NPC inverter. The both inverters are controlled with mature space vector modulation strategy. In order to provide the comparison both accurate and detailed enough NPC and ANPC simulation models should be obtained. The similar control model of SVM is utilized for both NPC and ANPC inverter models. The principles of control algorithms, the structure and description of models are clarified. The power loss calculation model is based on practical calculation approaches with certain assumptions. The comparison between NPC and ANPC topologies is presented based on results obtained for each semiconductor device, their switching and conduction losses and efficiency of the inverters. Alternative switching states of ANPC topology allow distributing losses among the switches more evenly, than in NPC inverter. Obviously, the losses of a switching device depend on its position in the topology. Losses distribution among the components in ANPC topology allows reducing the stress on certain switches, thus losses are equally distributed among the semiconductors, however the efficiency of the inverters is the same. As a new contribution to earlier studies, the obtained models of SVM control, NPC and ANPC inverters have been built. Thus, this thesis can be used in further more complicated modelling of full-power converters for modern multi-megawatt wind energy conversion systems.