Shear bond strength of orthodontic brackets bonded using halogen light and light-emitting diode at different debond times

The aim of this in vitro study was to compare the photoactivation effects of QTH (Quartz-Tungsten-Halogen) and LED (Light-Emitting Diode) on the SBS (Shear Bond Strength) of orthodontic brackets at different debond times. Seventy-two bovine lower incisors were randomly divided into two groups according to the photoactivation system used (QTH or LED). The enamel surfaces were conditioned with Transbond self-etching primer, and APC (Adhesive Pre-Coated) brackets were used in all specimens. Group I was cured with QTH for 20 s and Group II with LED for 10 s. Both groups were subdivided according to the different experimental times after bonding (immediately, 24 h and 7 days). The specimens were tested for SBS and the enamel surfaces were analyzed according to the Adhesive Remnant Index (ARI). The statistical analysis included the Tukey's test to evaluate the main effects of photoactivation and debond time on SBS. The Chi-square test was used to compare the ARI values found for each group, and no statistically significant difference was observed. The debond time of 7 days for QTH photoactivation showed statistically greater values of SBS when compared to the immediate and 24 h periods. There was no statistically significant difference between the QTH and LED groups immediately and after the 24 h period. In conclusion, bonding orthodontic brackets with LED photoactivation for 10 s is suggested because it requires a reduced clinical chair time.

Effect of light energy density on conversion degree and hardness of dual-cured resin cement

This study evaluated the effect of different light energy densities on conversion degree (CD) and Knoop hardness number (KHN) of RelyX ARC (RLX) resin cement. After manipulation according to the manufacturer's instructions, RLX was inserted into a rubber mold (0.8 mm X 5 mm) and covered with a Mylar strip. The tip of the lightcuring unit (LCU) was positioned in contact with the Mylar surface. Quartz-tungsten-halogen (QTH) and light-emitting diode (LED) LCUs with light densities of 10, 20 and 30 J/cm2 were used to light-cure the specimens. After light curing, the specimens were stored dry in lightproof containers at 37°C. After 24 hours, the CD was analyzed by FT-Raman and, after an additional 24-hours, samples were submitted to Knoop hardness testing. The data of the CD (%) and KHN were submitted to two-way ANOVA and the Tukey's test (α=0.05). QTH and LED were effective light curing units. For QTH, there were no differences among the light energy densities for CD or KHN. For LED, there was a significant reduction in CD with the light energy density set at 10 J/cm2. KHN was not influenced by the lightcuring unit and by its light energy density. © Operative Dentistry.

In vitro lingual bracket evaluation of indirect bonding with plasma arc, LED and halogen light

Authors - Magno AFF, Martins RP, Vaz LG, Martins LP Objectives - Evaluate the shear bond strength (SBS) and the adhesive remnant index (ARI) of indirect bonded lingual brackets using xenon plasma arc light, light-emitting diode (LED) and conventional quartz-tungsten-halogen light. Material and Methods - Lingual brackets were bonded indirectly to 60 premolars divided to three groups according to the curing light used: Group 1, plasma arc for 6 s; Group 2, LED for 10 s; and Group 3, halogen light for 40 s. After bonding, the specimens were subjected to a shear force until debonding. The debonding pattern was assessed and classified according to the ARI scores. The mean shear bond strengths were accessed by anova followed by the Student-Newman-Keuls test for multiple comparisons. ARI scores were assessed using the chi-square test. Results - The three groups showed significant differences (p < 0.001), with the averages of group 1 < group 2 < group 3. Groups showed no differences regarding ARI scores. Conclusion - Bonding lingual brackets indirectly with plasma arc, during 60% of the time used for the LED, produced lower SBS than obtained with the latter. Using LED during 25% of the time of the halogen light produced lower SBS than obtained with the latter. These differences did not influence the debonding pattern and are clinically acceptable according to the literature. © 2010 John Wiley & Sons A/S.

Variação genética, interação genótipo solo e ganhos na seleção em teste de progěnies de Corymbia citriodora Hook em Luiz Antonio, São Paulo

The aim of this study was to investigate the genetic variation, the genotype × soil interaction and the selection among and within Corymbia citriodora progenies in three different kinds of soils (Red Latossol, Quartz Sand and Purple Latossol), which occur in the Luiz Antônio Experimental Station, São Paulo State, Brazil. The progeny test was established 1983, using 56 open-pollinated families of C. citriodora. Twenty fve years after planting the following traits were measured: height, diameter at breast height (Dbh), stem form and survival. Best growth occurred in Purple Latossol. Significant differences among progenies were detected for most traits in all sites, suggesting the possibility of improvement by selection. In the analysis with sites, Significant differences among locals, progenies and genotypes × soil interaction were detected, confiming that the tested material has sufficient genetic variation to be explored by selection in all sites. The analysis of genotype × soil interaction indicates that growth traits present single interaction and the same progenies can be selected in each site. On the order hand, genotype × soil interaction for stem form and survival was complex; and specifc progenies need to be selected for each kind of soil. The population, due to its high genetic variation and strong genetic control of traits, permits to obtain considerable genetic gains by selection among and within progenies.

Respostas de clones de Eucalyptus grandis e E. grandis x E. urophylla à supressão de boro

The present work had as objective the study of clones of Eucalyptus grandis and E. grandis × E. urophylla under boron suppression on growth in height and diameter, development of symptoms of deficiency, boron content in leaf and polyols production. Plants were cultivated in pots with quartz in a greenhouse using two levels of boron per solution (0 and 0.5 mg L-1 of B). The 32 treatments followed a factorial scheme: 16 × 2 -16 clones and two doses of boron in a randomized block experimental design, with fve repetitions, totaling 160 plots. Plants were evaluated weekly for deficiency symptoms and monthly for height, stem diameter and leaf content of boron in different plant parts. The content of polyols was measured in two occasions: at 162 days and 192 days after starting the experiment. Decrease of growth and quick development of deficiency symptoms 40 days after boron suppression were observed, as well as a decrease of polyols synthesis. Foliar analysis, with boron supplement, resulted in the presence of mannitol and sorbitol in high enough concentration so that the evaluated plants could be considered rich in those polyols. Under boron suppression, boron levels in different portions of branches and stems of plants, as well as the presence of mannitol and sorbitol, indicated a conditional mobility of boron in Eucalyptus.

Temperature rise during adhesive and composite polymerization with different light-curing sources

AIM: This study evaluated the temperature rise of the adhesive system Single Bond (SB) and the composite resins Filtek Z350 flow (Z) and Filtek Supreme (S), when polymerized by light-emitting diode (LED XL 3000) and quartz-tungsten halogen (QTH Biolux). METHODS: Class V cavities (3 yen2 mm) were prepared in 80 bovine incisors under standardized conditions. The patients were divided as follows: G1: Control; G2: SB; G3: SB + Z; G4: SB + S. The groups were subdivided into two groups for polymerization (A: QTH, B: LED). Light curing was performed for 40 s and measurement of temperature changes during polymerization was performed with a thermocouple positioned inside the pulp chamber. Data were statistically analyzed using ANOVA and Tukey tests. RESULTS: The factors material (P<0.00001) and curing unit (P<0.00001) had significant influence on temperature rise. The lowest temperature increase (0.15 degrees C) was recorded in G2 B and the highest was induced in G1 A (0.75 degrees C, P<0.05). In all groups, lower pulp chamber temperature measurements were obtained when using LED compared to QTH (P<0.05). CONCLUSION: QTH caused greater increases in tooth temperature than LED. However, both sources did not increase pulpal temperature above the critical value that may cause pulpal damage.

Cementation of fiber post: influence of the cement insertion techniques on the bond strength of the fiber post-root dentin and the quality of the cement layer.

The aim of this study was to assess the influence of resin cement insertion methods on the bond strength of a fiber post to root dentin and quality of the cement layer. Forty bovine single-roots (length =16 mm) were randomly allocated into four groups, according to the cement insertion methods (N.=10): Gr1- Lentulo drill #40, Gr2- Centrix syringe, Gr3- Explorer #5, Gr4- fiber post. The root canals were prepared at 12 mm, using preparation bur # 3 of a cylinder quartz-FRC post (Aesthet post-plus, Bisco). The fiber posts were cemented using a multi-step etch-and-rinse adhesive system (All Bond 2®, Bisco) and a dual-cured resin cement (Duolink, Bisco). Each root was cut into seven samples: four samples of 1.8 mm thickness for push-out testing, and three with 0.5 mm for cement layer quality analyzing. One-way ANOVA was used for the push-out test values and the One-Way Kruskal-Wallis (P<0.05) and Dunn (10%) tests for the cement layer analyzes. ANOVA showed that the cement layer quality was affected by the cement insertion methods (P=0.0044): Gr1 (3.8 ± 1.3a), Gr2 (3.2 ± 1.3a), Gr3 (5.2 ± 1.5a,b) and Gr4 (5.2 ± 1.5b) (Dunn test), whereas the bond strength (MPa) was not affected by cement insertion methods: G1 (4.2 ± 1.3), G2 (3.2 ± 1.8), G3 (4.5 ± 0.9), G4 (3.1 ± 1.3). The fiber posts should be cemented with the assistance of the lentulo drill or centrix syringe to promote the best cement layer results.

Suíte vulcânica serra da bocaina, grupo amoguijá, maciço rio apa-MS

The Rio Apa Massif corresponds to the southeastern portion of the Amazonian Craton and crops out in the Mato Grosso do Sul State, Brazil. It is constituted by rocks of paleoproterozoic age of Rio Apa Complex, Alto Tererê Group and the plutonic-volcanic suites of the Amoguijá Group, subdivided in Alumiador Intrusive suits and Serra da Bocaina Volcanic. The Volcanic Suite is represented by São Francisco and Bocaina mountains and is constituted by terms of the composition of alkali - rhyolitic to rhyolitic, including in minor amounts riodacite, andesite and dacite. It consists of a variety of textual subvolcanic rocks, volcanic and varied volcanoclastics. The pyroclastic deposits are very expressive and consist of pyroclastic particle immerse in aphanitic matrix, fine grained or amorphous, where quartz, feldspar, chlorite, sericite, microlithes of carbonate, sparse spherulites and reliquiar volcanic glass can be distinguished. The pyroclastic rocks are represented by breccias, ignimbrites, agglomerate, tuffs, lapillistones and pumices and contain commonly vitroclasts, lithoclasts and crystalloclasts, pumices, fiammes, glass shards, spherulites, vesicles and amygdales. They are calc-alkaline rocks with dominant peraluminous character high to middle potassium series and define a sin-colisional dominant tectonic and are genetically associated to the evolution of the Amoguijá Magmatic Arc.

Química mineral e estimativas de pressão e temperatura em rochas metassedimentares do grupo araxá na região de morrinhos, sul do estado de goiás

In the Morrinhos region, Goiás state, Brazil, the rocks of the Araxá Group have mineral assemblages related to the metamorphic peak which occurred in this region and is typical of the amphibolite facies (kyanite zone). These rocks are associated with the initial stage of the main ductile deformation that occurred in this area. Thermobarometric calculations, including the associations, garnet + plagioclase + biotite + muscovite; garnet + plagioclase +biotite + muscovite + kyanite; garnet + plagioclase + biotite + muscovite + amphibole, with quartz in excess, indicate that the metamorphic peak occurred at temperatures of approximately 610°C and pressures in the order of 10 kbar. The P-T path is probably clockwise and is in agreement with the tectonic conditions observed in collisional settings.

Microhardness of dual-polymerized resin cement around a translucent fiber post in the intraradicular environment

Aim: In this study, we evaluated the effect of photopolymerization on Vickers microhardness of dual-polymerized resin cement at three locations when a translucent quartz fiber post was used. Materials and Methods: Single-rooted bovine teeth received quartz fiber post systems (length: 12 mm) using a dual-polymerized resin cement. In Group 1, the posts were cemented but not photopolymerized, and in Group 2, the posts were both cemented and photopolymerized. After cementation, approximately 1.5-mm thick sections were obtained (two cervical, two middle, and two apical) for regional microhardness evaluations. Statistical Analysis: Statistical analyses were performed using the SPSS software (ver. 11.0 for Windows; SPSS, Inc., Chicago, IL, USA). Microhardness (kg/mm 2 ) data were submitted to two-way analysis of variance (two-way ANOVA) and repeated measures with microhardness values as the dependent variable and polymerization status (two levels: with and without) and root region (three levels: cervical, middle, and apical) as independent variables. Multiple comparisons were made using Dunnett's T3 post-hoc test. P values of <0.05 were considered to indicate statistical significance in all tests. Results: Photopolymerization did not significantly change the microhardness values when compared with no photopolymerization. Microhardness values also showed no significant difference between the three regions in the root canals in both groups. Conclusions: The mode of polymerization of the cement tested in combination with the translucent quartz fiber post system did not affect the microhardness of the cement at the cervical, middle, or apical regions of the root.

Magmatismo do batólito rapakivi Rio Branco, sw do Cráton Amazônico (MT)

Rio Branco Rapakivi Batholith is located on the southwestern portion of the Amazonian Craton in Mato Grosso and belongs to the Cachoeirinha Tectonic Domain, part of the Rio Negro-Juruena Geochronological Province, Central Brasil. The batholith is constituted by microgabbros to quartz microgabbros and microdiorites to quartz microdiorites, middle to fine-grained equigranular to porphyritic varieties form the Rio Branco Intrusive Basic Suite, showing a discontinuous distribution and located near the margins of the intrusion.Majorly constituted by porphyritic, granophyric and isotropic facies of Rio Branco Intrusive Acid Suit which is composed by older dark red rapakivi monzogranites to quartz monzonites and quartz sienites (1403±0.6 Ma) and the younger red rapakivi leuco-monzogranites (1382±49 Ma) and late equigranular to pegmatitic monzogranites. The magmatism is constituted by two distinct magmas related to the end of the collisional event of Cachoeirinha Orogeny, one with alkaline basalts generated in an intraplate environment and the other postorogenic to anorogenic with peraluminous to metaluminous compositions and define a high-K calc-alkaline to shoshonitic magmatism in transition among the I- and A-types. The contacts are marked by extensive mafic sills and dikes of alkaline basalts derived from intraplate environment of the Salto do Céu Intrusive Basic Suite (±808 Ma) associate to the Sunsás-Aguapei Orogenic Belt and metasedimentary rocks of the Aguapeí Grup.

O Grupo Canastra em sua área-tipo, região de Tapira, sudoeste do estado de Minas Gerais

This work aimed at describing the Neoproterozoic evolution of a Southern Brasília Fold Belt segment, in Tapira area (southwest of Minas Gerais state, Brazil), using detailed geologic mapping. This area, the Canastra Group type-area, has showed great tectonic and stratigraphic complexities unlike the simplicity suggested in previous works. From recognizing the main tectonic discontinuities, it was possible to subdivide the area into some domains. In the west domain, they were individualized in tectonic sheet I, marked by pelitic rocks and pelitic-graphite rocks with psammitic intercalations, and II, pelitic rocks with psammitic and mafic-ultramafic intercalations overlapped by gneisses. In the east domain, a group of three tectonic sheets was defined, in which, in the two lower tectonic sheets, pelitic and pelitic-graphite rocks with psammitic rock intercalations prevailed, which is different in metamorphic conditions. The lower tectonic sheet is marked by mineralogical associations with muscovite + chlorite + quartz ± graphite ± albite, without biotite; however, the superior one is with muscovite + quartz + garnet ± chlorite ± biotite ± chloritoid ± graphite ± albite. In the upper tectonic sheet, pelitic rocks with local contributions of psammitic and ultramafics rocks occur. In the south domain, psammitic rocks basically occur with contributions of pelitics and rudaceous rocks, where the preservation of textures and sedimentary structures is common. Rocks of the several domains are interpreted as part of a passive continental margin basin, located in the western margin of the São Francisco paleocontinent. Thus, the south domain rocks would represent the facies of proximal platform; rocks of the lower and middle tectonic sheets (east domain) and of the tectonic sheet I (west domain) are of facies distal platform; and the ones from the upper tectonic sheet (east domain) and tectonic sheet II (west domain) were acknowledged as deposited in an environment of continental shelf and/or oceanic seafoor.

Occurrence of sensitivity during at-home and in-office tooth bleaching therapies with or without use of light sources

The aim of this study was to evaluate the effect of tooth bleaching with 10% carbamide peroxide (CP) or 35% hydrogen peroxide (HP), with or without quartz-tungsten-halogen light or hybrid source LED/infrared laser exposition on the occurrence duration, intensity and location of tooth sensitivity Forty patients were selected and randomly divided into four groups: GI--home bleaching with CP for 4 hours a day, over the course of 3 weeks; GII--three sessions of HP with three 10-minute applications at each session and no light source; GIII--the same procedure as GII with quartz-tungsten-halogen light irradiation; GIV--the same procedure as GII with LED/laser light irradiation. The evaluation included an appointment with each patient before and after each HP bleaching session or each weekly CP bleaching and 7, 30 and 180 days after the end of treatment. The Kruskal-Wallis test revealed that the duration and intensity of post-treatment sensitivity were significantly higher for HP than for CP (p< 0.05), and symptoms were located predominantly in anterior teeth. All bleaching methods generated sensitivity, which was more frequent in anterior teeth. However, treatment with CP generated lower sensitivity than treatment with HP independently of the light sources.

Geotermometria das águas hipertermais do Sistema Aquífero Guarani no estado de São Paulo

Several geothermometers have been employed to determine the expected temperature in the groundwater reservoirs, most part of them based on the chemical equilibrium between thermal groundwaters and minerals which constitute the aquifer framework. Based on this principle, groundwater from Guarani Aquifer System, which presents temperatures upon to 38°C, classified as hyperthermal by the Brazilian Mineral Water Code, had their chemical composition evaluated with the main purpose to determine the expected temperatures in the reservoir based on the application of several geothermometers. These groundwaters can be classified as Na-HCO3 type evolving to Na-HCO3-Cl-SO4 type due the increase in sulphate and chloride concentrations. Measured groundwater temperatures show a good correlation with the depth of the aquifer, indicating an average geothermal gradient of 27.7°C/km. The lowest geothermal gradients, bellow 25°C/km, are observed in the central portion of the study area; meanwhile the highest gradients are observed in NE and W portions of the study area. Quartz equilibrium based geothermometers return temperature over the measured temperatures, meanwhile chalcedony geothermometer returns temperatures near the measured in the wells, except for the wells located in the area which presents the lowest geothermal gradients. The geothermometers based on the equilibrium between Na/K have returned temperatures diverse from the measured at the field, meanwhile the geothermometer based on the equilibrium between Na/K/Ca has presented good match with groundwater which present temperatures under 50°C, due the thermodynamic equilibrium between these waters and feldspars. Geothermometers show evidences about mixtures between groundwaters from GAS and underlying units, especially in wells located in the SW portion of the study area.

Caracterização química e mineralógica de azulejos portugueses do centro histórico de São Luís-MA (Brasil): Uma aproximação à mineralogia e à temperatura de queima das matérias-primas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)